libvirt/tests/networkxml2confdata/dhcp6-nat-network.xml
Gene Czarcinski 0b73a763f3 use client id for IPv6 DHCP host definition
Originally, only a host name was used to associate a
DHCPv6 request with a specific IPv6 address.  Further testing
demonstrates that this is an unreliable method and, instead,
a client-id or DUID needs to be used.  According to DHCPv6
standards, this id can be a duid-LLT, duid-LL, or duid-UUID
even though dnsmasq will accept almost any text string.

Although validity checking of a specified string makes sure it is
hexadecimal notation with bytes separated by colons, there is no
rigorous check to make sure it meets the standard.

Documentation and schemas have been updated.

Signed-off-by: Gene Czarcinski <gene@czarc.net>
Signed-off-by: Laine Stump <laine@laine.org>
2013-02-25 02:49:06 -05:00

28 lines
1.2 KiB
XML

<network>
<name>default</name>
<uuid>81ff0d90-c91e-6742-64da-4a736edb9a9b</uuid>
<forward dev='eth1' mode='nat'/>
<bridge name='virbr0' stp='on' delay='0' />
<ip address='192.168.122.1' netmask='255.255.255.0'>
<dhcp>
<range start='192.168.122.2' end='192.168.122.254' />
<host mac='00:16:3e:77:e2:ed' name='a.example.com' ip='192.168.122.10' />
<host mac='00:16:3e:3e:a9:1a' name='b.example.com' ip='192.168.122.11' />
</dhcp>
</ip>
<ip family='ipv4' address='192.168.123.1' netmask='255.255.255.0'>
</ip>
<ip family='ipv6' address='2001:db8:ac10:fd01::1' prefix='64'>
<dhcp>
<range start='2001:db8:ac10:fd01::1:10' end='2001:db8:ac10:fd01::1:ff' />
<host id='0:4:7e:7d:f0:7d:a8:bc:c5:d2:13:32:11:ed:16:ea:84:63' ip='2001:db8:ac10:fd01::1:20' />
<host name='paul' ip='2001:db8:ac10:fd01::1:21' />
<host id='0:3:0:1:0:16:3e:11:22:33' name='peter.xyz' ip='2001:db8:ac10:fd01::1:22' />
<host id='0:3:0:1:0:16:3e:44:55:33' ip='2001:db8:ac10:fd01::1:23' />
<host id='0:1:0:1:18:aa:62:fe:0:16:3e:44:55:66' name='badbob' ip='2001:db8:ac10:fd01::1:24' />
</dhcp>
</ip>
<ip family='ipv4' address='10.24.10.1'>
</ip>
</network>