mirror of
https://gitlab.com/libvirt/libvirt.git
synced 2024-12-29 00:55:22 +00:00
070690538a
When it is starting up, firewalld will delete all existing iptables rules and chains before adding its own rules. If libvirtd were to try to directly add iptables rules during the time before firewalld has finished initializing, firewalld would end up deleting the rules that libvirtd has just added. Currently this isn't a problem, since libvirtd only adds iptables rules via the firewalld "passthrough command" API, and so firewalld is able to properly serialize everything. However, we will soon be changing libvirtd to add its iptables and ebtables rules by directly calling iptables/ebtables rather than via firewalld, thus removing the serialization of libvirtd adding rules vs. firewalld deleting rules. This will especially apparent (if we don't fix it in advance, as this patch does) when libvirtd is responding to the dbus NameOwnerChanged event, which is used to learn when firewalld has been restarted. In that case, dbus sends the event before firewalld has been able to complete its initialization, so when libvirt responds to the event by adding back its iptables rules (with direct calls to /usr/bin/iptables), some of those rules are added before firewalld has a chance to do its "remove everything" startup protocol. The usual result of this is that libvirt will successfully add its private chains (e.g. LIBVIRT_INP, etc), but then fail when it tries to add a rule jumping to one of those chains (because in the interim, firewalld has deleted the new chains). The solution is for libvirt to preface it's direct calling to iptables with a iptables command sent via firewalld's passthrough command API. Since commands sent to firewalld are completed synchronously, and since firewalld won't service them until it has completed its own initialization, this will assure that by the time libvirt starts calling iptables to add rules, that firewalld will not be following up by deleting any of those rules. To minimize the amount of extra overhead, we request the simplest iptables command possible: "iptables -V" (and aside from logging a debug message, we ignore the result, for good measure). (This patch is being done *before* the patch that switches to calling iptables directly, so that everything will function properly with any fractional part of the series applied). Signed-off-by: Laine Stump <laine@redhat.com> Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
1139 lines
37 KiB
C
1139 lines
37 KiB
C
/*
|
|
* viriptables.c: helper APIs for managing iptables
|
|
*
|
|
* Copyright (C) 2007-2014 Red Hat, Inc.
|
|
*
|
|
* This library is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU Lesser General Public
|
|
* License as published by the Free Software Foundation; either
|
|
* version 2.1 of the License, or (at your option) any later version.
|
|
*
|
|
* This library is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
|
* Lesser General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU Lesser General Public
|
|
* License along with this library. If not, see
|
|
* <http://www.gnu.org/licenses/>.
|
|
*/
|
|
|
|
#include <config.h>
|
|
|
|
#include <stdarg.h>
|
|
#include <unistd.h>
|
|
#include <fcntl.h>
|
|
#include <sys/types.h>
|
|
#include <sys/stat.h>
|
|
|
|
#include "internal.h"
|
|
#include "viriptables.h"
|
|
#include "vircommand.h"
|
|
#include "viralloc.h"
|
|
#include "virerror.h"
|
|
#include "virfile.h"
|
|
#include "virlog.h"
|
|
#include "virthread.h"
|
|
#include "virstring.h"
|
|
#include "virutil.h"
|
|
#include "virhash.h"
|
|
|
|
VIR_LOG_INIT("util.iptables");
|
|
|
|
#define VIR_FROM_THIS VIR_FROM_NONE
|
|
|
|
enum {
|
|
ADD = 0,
|
|
REMOVE
|
|
};
|
|
|
|
static bool deletePrivate = true;
|
|
|
|
typedef struct {
|
|
const char *parent;
|
|
const char *child;
|
|
} iptablesGlobalChain;
|
|
|
|
typedef struct {
|
|
virFirewallLayer layer;
|
|
const char *table;
|
|
iptablesGlobalChain *chains;
|
|
size_t nchains;
|
|
bool *changed;
|
|
} iptablesGlobalChainData;
|
|
|
|
|
|
static int
|
|
iptablesPrivateChainCreate(virFirewallPtr fw,
|
|
virFirewallLayer layer,
|
|
const char *const *lines,
|
|
void *opaque)
|
|
{
|
|
iptablesGlobalChainData *data = opaque;
|
|
GHashTable *chains = NULL;
|
|
GHashTable *links = NULL;
|
|
const char *const *tmp;
|
|
int ret = -1;
|
|
size_t i;
|
|
|
|
if (!(chains = virHashNew(NULL)))
|
|
goto cleanup;
|
|
if (!(links = virHashNew(NULL)))
|
|
goto cleanup;
|
|
|
|
tmp = lines;
|
|
while (tmp && *tmp) {
|
|
if (STRPREFIX(*tmp, "-N ")) { /* eg "-N LIBVIRT_INP" */
|
|
if (virHashUpdateEntry(chains, *tmp + 3, (void *)0x1) < 0)
|
|
goto cleanup;
|
|
} else if (STRPREFIX(*tmp, "-A ")) { /* eg "-A INPUT -j LIBVIRT_INP" */
|
|
char *sep = strchr(*tmp + 3, ' ');
|
|
if (sep) {
|
|
*sep = '\0';
|
|
if (STRPREFIX(sep + 1, "-j ")) {
|
|
if (virHashUpdateEntry(links, sep + 4,
|
|
(char *)*tmp + 3) < 0)
|
|
goto cleanup;
|
|
}
|
|
}
|
|
}
|
|
tmp++;
|
|
}
|
|
|
|
for (i = 0; i < data->nchains; i++) {
|
|
const char *from;
|
|
if (!virHashLookup(chains, data->chains[i].child)) {
|
|
virFirewallAddRule(fw, layer,
|
|
"--table", data->table,
|
|
"--new-chain", data->chains[i].child, NULL);
|
|
*data->changed = true;
|
|
}
|
|
|
|
from = virHashLookup(links, data->chains[i].child);
|
|
if (!from || STRNEQ(from, data->chains[i].parent))
|
|
virFirewallAddRule(fw, layer,
|
|
"--table", data->table,
|
|
"--insert", data->chains[i].parent,
|
|
"--jump", data->chains[i].child, NULL);
|
|
}
|
|
|
|
ret = 0;
|
|
cleanup:
|
|
virHashFree(chains);
|
|
virHashFree(links);
|
|
return ret;
|
|
}
|
|
|
|
|
|
int
|
|
iptablesSetupPrivateChains(virFirewallLayer layer)
|
|
{
|
|
g_autoptr(virFirewall) fw = virFirewallNew();
|
|
iptablesGlobalChain filter_chains[] = {
|
|
{"INPUT", "LIBVIRT_INP"},
|
|
{"OUTPUT", "LIBVIRT_OUT"},
|
|
{"FORWARD", "LIBVIRT_FWO"},
|
|
{"FORWARD", "LIBVIRT_FWI"},
|
|
{"FORWARD", "LIBVIRT_FWX"},
|
|
};
|
|
iptablesGlobalChain natmangle_chains[] = {
|
|
{"POSTROUTING", "LIBVIRT_PRT"},
|
|
};
|
|
bool changed = false;
|
|
iptablesGlobalChainData data[] = {
|
|
{ layer, "filter",
|
|
filter_chains, G_N_ELEMENTS(filter_chains), &changed },
|
|
{ layer, "nat",
|
|
natmangle_chains, G_N_ELEMENTS(natmangle_chains), &changed },
|
|
{ layer, "mangle",
|
|
natmangle_chains, G_N_ELEMENTS(natmangle_chains), &changed },
|
|
};
|
|
size_t i;
|
|
|
|
/* When the backend is firewalld, we need to make sure that
|
|
* firewalld has been fully started and completed its
|
|
* initialization, otherwise firewalld might delete our rules soon
|
|
* after we add them!
|
|
*/
|
|
virFirewallBackendSynchronize();
|
|
|
|
virFirewallStartTransaction(fw, 0);
|
|
|
|
for (i = 0; i < G_N_ELEMENTS(data); i++)
|
|
virFirewallAddRuleFull(fw, data[i].layer,
|
|
false, iptablesPrivateChainCreate,
|
|
&(data[i]), "--table", data[i].table,
|
|
"--list-rules", NULL);
|
|
|
|
if (virFirewallApply(fw) < 0)
|
|
return -1;
|
|
|
|
return changed ? 1 : 0;
|
|
}
|
|
|
|
|
|
void
|
|
iptablesSetDeletePrivate(bool pvt)
|
|
{
|
|
deletePrivate = pvt;
|
|
}
|
|
|
|
|
|
static void
|
|
iptablesInput(virFirewallPtr fw,
|
|
virFirewallLayer layer,
|
|
bool pvt,
|
|
const char *iface,
|
|
int port,
|
|
int action,
|
|
int tcp)
|
|
{
|
|
char portstr[32];
|
|
|
|
g_snprintf(portstr, sizeof(portstr), "%d", port);
|
|
portstr[sizeof(portstr) - 1] = '\0';
|
|
|
|
virFirewallAddRule(fw, layer,
|
|
"--table", "filter",
|
|
action == ADD ? "--insert" : "--delete",
|
|
pvt ? "LIBVIRT_INP" : "INPUT",
|
|
"--in-interface", iface,
|
|
"--protocol", tcp ? "tcp" : "udp",
|
|
"--destination-port", portstr,
|
|
"--jump", "ACCEPT",
|
|
NULL);
|
|
}
|
|
|
|
static void
|
|
iptablesOutput(virFirewallPtr fw,
|
|
virFirewallLayer layer,
|
|
bool pvt,
|
|
const char *iface,
|
|
int port,
|
|
int action,
|
|
int tcp)
|
|
{
|
|
char portstr[32];
|
|
|
|
g_snprintf(portstr, sizeof(portstr), "%d", port);
|
|
portstr[sizeof(portstr) - 1] = '\0';
|
|
|
|
virFirewallAddRule(fw, layer,
|
|
"--table", "filter",
|
|
action == ADD ? "--insert" : "--delete",
|
|
pvt ? "LIBVIRT_OUT" : "OUTPUT",
|
|
"--out-interface", iface,
|
|
"--protocol", tcp ? "tcp" : "udp",
|
|
"--destination-port", portstr,
|
|
"--jump", "ACCEPT",
|
|
NULL);
|
|
}
|
|
|
|
/**
|
|
* iptablesAddTcpInput:
|
|
* @ctx: pointer to the IP table context
|
|
* @iface: the interface name
|
|
* @port: the TCP port to add
|
|
*
|
|
* Add an input to the IP table allowing access to the given @port on
|
|
* the given @iface interface for TCP packets
|
|
*/
|
|
void
|
|
iptablesAddTcpInput(virFirewallPtr fw,
|
|
virFirewallLayer layer,
|
|
const char *iface,
|
|
int port)
|
|
{
|
|
iptablesInput(fw, layer, true, iface, port, ADD, 1);
|
|
}
|
|
|
|
/**
|
|
* iptablesRemoveTcpInput:
|
|
* @ctx: pointer to the IP table context
|
|
* @iface: the interface name
|
|
* @port: the TCP port to remove
|
|
*
|
|
* Removes an input from the IP table, hence forbidding access to the given
|
|
* @port on the given @iface interface for TCP packets
|
|
*/
|
|
void
|
|
iptablesRemoveTcpInput(virFirewallPtr fw,
|
|
virFirewallLayer layer,
|
|
const char *iface,
|
|
int port)
|
|
{
|
|
iptablesInput(fw, layer, deletePrivate, iface, port, REMOVE, 1);
|
|
}
|
|
|
|
/**
|
|
* iptablesAddUdpInput:
|
|
* @ctx: pointer to the IP table context
|
|
* @iface: the interface name
|
|
* @port: the UDP port to add
|
|
*
|
|
* Add an input to the IP table allowing access to the given @port on
|
|
* the given @iface interface for UDP packets
|
|
*/
|
|
void
|
|
iptablesAddUdpInput(virFirewallPtr fw,
|
|
virFirewallLayer layer,
|
|
const char *iface,
|
|
int port)
|
|
{
|
|
iptablesInput(fw, layer, true, iface, port, ADD, 0);
|
|
}
|
|
|
|
/**
|
|
* iptablesRemoveUdpInput:
|
|
* @ctx: pointer to the IP table context
|
|
* @iface: the interface name
|
|
* @port: the UDP port to remove
|
|
*
|
|
* Removes an input from the IP table, hence forbidding access to the given
|
|
* @port on the given @iface interface for UDP packets
|
|
*/
|
|
void
|
|
iptablesRemoveUdpInput(virFirewallPtr fw,
|
|
virFirewallLayer layer,
|
|
const char *iface,
|
|
int port)
|
|
{
|
|
iptablesInput(fw, layer, deletePrivate, iface, port, REMOVE, 0);
|
|
}
|
|
|
|
/**
|
|
* iptablesAddTcpOutput:
|
|
* @ctx: pointer to the IP table context
|
|
* @iface: the interface name
|
|
* @port: the TCP port to add
|
|
*
|
|
* Add an output to the IP table allowing access to the given @port from
|
|
* the given @iface interface for TCP packets
|
|
*/
|
|
void
|
|
iptablesAddTcpOutput(virFirewallPtr fw,
|
|
virFirewallLayer layer,
|
|
const char *iface,
|
|
int port)
|
|
{
|
|
iptablesOutput(fw, layer, true, iface, port, ADD, 1);
|
|
}
|
|
|
|
/**
|
|
* iptablesRemoveTcpOutput:
|
|
* @ctx: pointer to the IP table context
|
|
* @iface: the interface name
|
|
* @port: the UDP port to remove
|
|
*
|
|
* Removes an output from the IP table, hence forbidding access to the given
|
|
* @port from the given @iface interface for TCP packets
|
|
*/
|
|
void
|
|
iptablesRemoveTcpOutput(virFirewallPtr fw,
|
|
virFirewallLayer layer,
|
|
const char *iface,
|
|
int port)
|
|
{
|
|
iptablesOutput(fw, layer, deletePrivate, iface, port, REMOVE, 1);
|
|
}
|
|
|
|
/**
|
|
* iptablesAddUdpOutput:
|
|
* @ctx: pointer to the IP table context
|
|
* @iface: the interface name
|
|
* @port: the UDP port to add
|
|
*
|
|
* Add an output to the IP table allowing access to the given @port from
|
|
* the given @iface interface for UDP packets
|
|
*/
|
|
void
|
|
iptablesAddUdpOutput(virFirewallPtr fw,
|
|
virFirewallLayer layer,
|
|
const char *iface,
|
|
int port)
|
|
{
|
|
iptablesOutput(fw, layer, true, iface, port, ADD, 0);
|
|
}
|
|
|
|
/**
|
|
* iptablesRemoveUdpOutput:
|
|
* @ctx: pointer to the IP table context
|
|
* @iface: the interface name
|
|
* @port: the UDP port to remove
|
|
*
|
|
* Removes an output from the IP table, hence forbidding access to the given
|
|
* @port from the given @iface interface for UDP packets
|
|
*/
|
|
void
|
|
iptablesRemoveUdpOutput(virFirewallPtr fw,
|
|
virFirewallLayer layer,
|
|
const char *iface,
|
|
int port)
|
|
{
|
|
iptablesOutput(fw, layer, deletePrivate, iface, port, REMOVE, 0);
|
|
}
|
|
|
|
|
|
static char *iptablesFormatNetwork(virSocketAddr *netaddr,
|
|
unsigned int prefix)
|
|
{
|
|
virSocketAddr network;
|
|
g_autofree char *netstr = NULL;
|
|
char *ret;
|
|
|
|
if (!(VIR_SOCKET_ADDR_IS_FAMILY(netaddr, AF_INET) ||
|
|
VIR_SOCKET_ADDR_IS_FAMILY(netaddr, AF_INET6))) {
|
|
virReportError(VIR_ERR_CONFIG_UNSUPPORTED, "%s",
|
|
_("Only IPv4 or IPv6 addresses can be used with iptables"));
|
|
return NULL;
|
|
}
|
|
|
|
if (virSocketAddrMaskByPrefix(netaddr, prefix, &network) < 0) {
|
|
virReportError(VIR_ERR_INTERNAL_ERROR, "%s",
|
|
_("Failure to mask address"));
|
|
return NULL;
|
|
}
|
|
|
|
netstr = virSocketAddrFormat(&network);
|
|
|
|
if (!netstr)
|
|
return NULL;
|
|
|
|
ret = g_strdup_printf("%s/%d", netstr, prefix);
|
|
|
|
return ret;
|
|
}
|
|
|
|
|
|
/* Allow all traffic coming from the bridge, with a valid network address
|
|
* to proceed to WAN
|
|
*/
|
|
static int
|
|
iptablesForwardAllowOut(virFirewallPtr fw,
|
|
bool pvt,
|
|
virSocketAddr *netaddr,
|
|
unsigned int prefix,
|
|
const char *iface,
|
|
const char *physdev,
|
|
int action)
|
|
{
|
|
g_autofree char *networkstr = NULL;
|
|
virFirewallLayer layer = VIR_SOCKET_ADDR_FAMILY(netaddr) == AF_INET ?
|
|
VIR_FIREWALL_LAYER_IPV4 : VIR_FIREWALL_LAYER_IPV6;
|
|
|
|
if (!(networkstr = iptablesFormatNetwork(netaddr, prefix)))
|
|
return -1;
|
|
|
|
if (physdev && physdev[0])
|
|
virFirewallAddRule(fw, layer,
|
|
"--table", "filter",
|
|
action == ADD ? "--insert" : "--delete",
|
|
pvt ? "LIBVIRT_FWO" : "FORWARD",
|
|
"--source", networkstr,
|
|
"--in-interface", iface,
|
|
"--out-interface", physdev,
|
|
"--jump", "ACCEPT",
|
|
NULL);
|
|
else
|
|
virFirewallAddRule(fw, layer,
|
|
"--table", "filter",
|
|
action == ADD ? "--insert" : "--delete",
|
|
pvt ? "LIBVIRT_FWO" : "FORWARD",
|
|
"--source", networkstr,
|
|
"--in-interface", iface,
|
|
"--jump", "ACCEPT",
|
|
NULL);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* iptablesAddForwardAllowOut:
|
|
* @ctx: pointer to the IP table context
|
|
* @network: the source network name
|
|
* @iface: the source interface name
|
|
* @physdev: the physical output device
|
|
*
|
|
* Add a rule to the IP table context to allow the traffic for the
|
|
* network @network via interface @iface to be forwarded to
|
|
* @physdev device. This allow the outbound traffic on a bridge.
|
|
*
|
|
* Returns 0 in case of success or an error code otherwise
|
|
*/
|
|
int
|
|
iptablesAddForwardAllowOut(virFirewallPtr fw,
|
|
virSocketAddr *netaddr,
|
|
unsigned int prefix,
|
|
const char *iface,
|
|
const char *physdev)
|
|
{
|
|
return iptablesForwardAllowOut(fw, true, netaddr, prefix, iface, physdev, ADD);
|
|
}
|
|
|
|
/**
|
|
* iptablesRemoveForwardAllowOut:
|
|
* @ctx: pointer to the IP table context
|
|
* @network: the source network name
|
|
* @iface: the source interface name
|
|
* @physdev: the physical output device
|
|
*
|
|
* Remove a rule from the IP table context hence forbidding forwarding
|
|
* of the traffic for the network @network via interface @iface
|
|
* to the @physdev device output. This stops the outbound traffic on a bridge.
|
|
*
|
|
* Returns 0 in case of success or an error code otherwise
|
|
*/
|
|
int
|
|
iptablesRemoveForwardAllowOut(virFirewallPtr fw,
|
|
virSocketAddr *netaddr,
|
|
unsigned int prefix,
|
|
const char *iface,
|
|
const char *physdev)
|
|
{
|
|
return iptablesForwardAllowOut(fw, deletePrivate, netaddr, prefix, iface, physdev, REMOVE);
|
|
}
|
|
|
|
|
|
/* Allow all traffic destined to the bridge, with a valid network address
|
|
* and associated with an existing connection
|
|
*/
|
|
static int
|
|
iptablesForwardAllowRelatedIn(virFirewallPtr fw,
|
|
bool pvt,
|
|
virSocketAddr *netaddr,
|
|
unsigned int prefix,
|
|
const char *iface,
|
|
const char *physdev,
|
|
int action)
|
|
{
|
|
virFirewallLayer layer = VIR_SOCKET_ADDR_FAMILY(netaddr) == AF_INET ?
|
|
VIR_FIREWALL_LAYER_IPV4 : VIR_FIREWALL_LAYER_IPV6;
|
|
g_autofree char *networkstr = NULL;
|
|
|
|
if (!(networkstr = iptablesFormatNetwork(netaddr, prefix)))
|
|
return -1;
|
|
|
|
if (physdev && physdev[0])
|
|
virFirewallAddRule(fw, layer,
|
|
"--table", "filter",
|
|
action == ADD ? "--insert" : "--delete",
|
|
pvt ? "LIBVIRT_FWI" : "FORWARD",
|
|
"--destination", networkstr,
|
|
"--in-interface", physdev,
|
|
"--out-interface", iface,
|
|
"--match", "conntrack",
|
|
"--ctstate", "ESTABLISHED,RELATED",
|
|
"--jump", "ACCEPT",
|
|
NULL);
|
|
else
|
|
virFirewallAddRule(fw, layer,
|
|
"--table", "filter",
|
|
action == ADD ? "--insert" : "--delete",
|
|
pvt ? "LIBVIRT_FWI" : "FORWARD",
|
|
"--destination", networkstr,
|
|
"--out-interface", iface,
|
|
"--match", "conntrack",
|
|
"--ctstate", "ESTABLISHED,RELATED",
|
|
"--jump", "ACCEPT",
|
|
NULL);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* iptablesAddForwardAllowRelatedIn:
|
|
* @ctx: pointer to the IP table context
|
|
* @network: the source network name
|
|
* @iface: the output interface name
|
|
* @physdev: the physical input device or NULL
|
|
*
|
|
* Add rules to the IP table context to allow the traffic for the
|
|
* network @network on @physdev device to be forwarded to
|
|
* interface @iface, if it is part of an existing connection.
|
|
*
|
|
* Returns 0 in case of success or an error code otherwise
|
|
*/
|
|
int
|
|
iptablesAddForwardAllowRelatedIn(virFirewallPtr fw,
|
|
virSocketAddr *netaddr,
|
|
unsigned int prefix,
|
|
const char *iface,
|
|
const char *physdev)
|
|
{
|
|
return iptablesForwardAllowRelatedIn(fw, true, netaddr, prefix, iface, physdev, ADD);
|
|
}
|
|
|
|
/**
|
|
* iptablesRemoveForwardAllowRelatedIn:
|
|
* @ctx: pointer to the IP table context
|
|
* @network: the source network name
|
|
* @iface: the output interface name
|
|
* @physdev: the physical input device or NULL
|
|
*
|
|
* Remove rules from the IP table context hence forbidding the traffic for
|
|
* network @network on @physdev device to be forwarded to
|
|
* interface @iface, if it is part of an existing connection.
|
|
*
|
|
* Returns 0 in case of success or an error code otherwise
|
|
*/
|
|
int
|
|
iptablesRemoveForwardAllowRelatedIn(virFirewallPtr fw,
|
|
virSocketAddr *netaddr,
|
|
unsigned int prefix,
|
|
const char *iface,
|
|
const char *physdev)
|
|
{
|
|
return iptablesForwardAllowRelatedIn(fw, deletePrivate, netaddr, prefix, iface, physdev, REMOVE);
|
|
}
|
|
|
|
/* Allow all traffic destined to the bridge, with a valid network address
|
|
*/
|
|
static int
|
|
iptablesForwardAllowIn(virFirewallPtr fw,
|
|
bool pvt,
|
|
virSocketAddr *netaddr,
|
|
unsigned int prefix,
|
|
const char *iface,
|
|
const char *physdev,
|
|
int action)
|
|
{
|
|
virFirewallLayer layer = VIR_SOCKET_ADDR_FAMILY(netaddr) == AF_INET ?
|
|
VIR_FIREWALL_LAYER_IPV4 : VIR_FIREWALL_LAYER_IPV6;
|
|
g_autofree char *networkstr = NULL;
|
|
|
|
if (!(networkstr = iptablesFormatNetwork(netaddr, prefix)))
|
|
return -1;
|
|
|
|
if (physdev && physdev[0])
|
|
virFirewallAddRule(fw, layer,
|
|
"--table", "filter",
|
|
action == ADD ? "--insert" : "--delete",
|
|
pvt ? "LIBVIRT_FWI" : "FORWARD",
|
|
"--destination", networkstr,
|
|
"--in-interface", physdev,
|
|
"--out-interface", iface,
|
|
"--jump", "ACCEPT",
|
|
NULL);
|
|
else
|
|
virFirewallAddRule(fw, layer,
|
|
"--table", "filter",
|
|
action == ADD ? "--insert" : "--delete",
|
|
pvt ? "LIBVIRT_FWI" : "FORWARD",
|
|
"--destination", networkstr,
|
|
"--out-interface", iface,
|
|
"--jump", "ACCEPT",
|
|
NULL);
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* iptablesAddForwardAllowIn:
|
|
* @ctx: pointer to the IP table context
|
|
* @network: the source network name
|
|
* @iface: the output interface name
|
|
* @physdev: the physical input device or NULL
|
|
*
|
|
* Add rules to the IP table context to allow the traffic for the
|
|
* network @network on @physdev device to be forwarded to
|
|
* interface @iface. This allow the inbound traffic on a bridge.
|
|
*
|
|
* Returns 0 in case of success or an error code otherwise
|
|
*/
|
|
int
|
|
iptablesAddForwardAllowIn(virFirewallPtr fw,
|
|
virSocketAddr *netaddr,
|
|
unsigned int prefix,
|
|
const char *iface,
|
|
const char *physdev)
|
|
{
|
|
return iptablesForwardAllowIn(fw, true, netaddr, prefix, iface, physdev, ADD);
|
|
}
|
|
|
|
/**
|
|
* iptablesRemoveForwardAllowIn:
|
|
* @ctx: pointer to the IP table context
|
|
* @network: the source network name
|
|
* @iface: the output interface name
|
|
* @physdev: the physical input device or NULL
|
|
*
|
|
* Remove rules from the IP table context hence forbidding the traffic for
|
|
* network @network on @physdev device to be forwarded to
|
|
* interface @iface. This stops the inbound traffic on a bridge.
|
|
*
|
|
* Returns 0 in case of success or an error code otherwise
|
|
*/
|
|
int
|
|
iptablesRemoveForwardAllowIn(virFirewallPtr fw,
|
|
virSocketAddr *netaddr,
|
|
unsigned int prefix,
|
|
const char *iface,
|
|
const char *physdev)
|
|
{
|
|
return iptablesForwardAllowIn(fw, deletePrivate, netaddr, prefix, iface, physdev, REMOVE);
|
|
}
|
|
|
|
static void
|
|
iptablesForwardAllowCross(virFirewallPtr fw,
|
|
virFirewallLayer layer,
|
|
bool pvt,
|
|
const char *iface,
|
|
int action)
|
|
{
|
|
virFirewallAddRule(fw, layer,
|
|
"--table", "filter",
|
|
action == ADD ? "--insert" : "--delete",
|
|
pvt ? "LIBVIRT_FWX" : "FORWARD",
|
|
"--in-interface", iface,
|
|
"--out-interface", iface,
|
|
"--jump", "ACCEPT",
|
|
NULL);
|
|
}
|
|
|
|
/**
|
|
* iptablesAddForwardAllowCross:
|
|
* @ctx: pointer to the IP table context
|
|
* @iface: the input/output interface name
|
|
*
|
|
* Add rules to the IP table context to allow traffic to cross that
|
|
* interface. It allows all traffic between guests on the same bridge
|
|
* represented by that interface.
|
|
*
|
|
* Returns 0 in case of success or an error code otherwise
|
|
*/
|
|
void
|
|
iptablesAddForwardAllowCross(virFirewallPtr fw,
|
|
virFirewallLayer layer,
|
|
const char *iface)
|
|
{
|
|
iptablesForwardAllowCross(fw, layer, true, iface, ADD);
|
|
}
|
|
|
|
/**
|
|
* iptablesRemoveForwardAllowCross:
|
|
* @ctx: pointer to the IP table context
|
|
* @iface: the input/output interface name
|
|
*
|
|
* Remove rules to the IP table context to block traffic to cross that
|
|
* interface. It forbids traffic between guests on the same bridge
|
|
* represented by that interface.
|
|
*
|
|
* Returns 0 in case of success or an error code otherwise
|
|
*/
|
|
void
|
|
iptablesRemoveForwardAllowCross(virFirewallPtr fw,
|
|
virFirewallLayer layer,
|
|
const char *iface)
|
|
{
|
|
iptablesForwardAllowCross(fw, layer, deletePrivate, iface, REMOVE);
|
|
}
|
|
|
|
static void
|
|
iptablesForwardRejectOut(virFirewallPtr fw,
|
|
virFirewallLayer layer,
|
|
bool pvt,
|
|
const char *iface,
|
|
int action)
|
|
{
|
|
virFirewallAddRule(fw, layer,
|
|
"--table", "filter",
|
|
action == ADD ? "--insert" : "--delete",
|
|
pvt ? "LIBVIRT_FWO" : "FORWARD",
|
|
"--in-interface", iface,
|
|
"--jump", "REJECT",
|
|
NULL);
|
|
}
|
|
|
|
/**
|
|
* iptablesAddForwardRejectOut:
|
|
* @ctx: pointer to the IP table context
|
|
* @iface: the output interface name
|
|
*
|
|
* Add rules to the IP table context to forbid all traffic to that
|
|
* interface. It forbids forwarding from the bridge to that interface.
|
|
*
|
|
* Returns 0 in case of success or an error code otherwise
|
|
*/
|
|
void
|
|
iptablesAddForwardRejectOut(virFirewallPtr fw,
|
|
virFirewallLayer layer,
|
|
const char *iface)
|
|
{
|
|
iptablesForwardRejectOut(fw, layer, true, iface, ADD);
|
|
}
|
|
|
|
/**
|
|
* iptablesRemoveForwardRejectOut:
|
|
* @ctx: pointer to the IP table context
|
|
* @iface: the output interface name
|
|
*
|
|
* Remove rules from the IP table context forbidding all traffic to that
|
|
* interface. It reallow forwarding from the bridge to that interface.
|
|
*
|
|
* Returns 0 in case of success or an error code otherwise
|
|
*/
|
|
void
|
|
iptablesRemoveForwardRejectOut(virFirewallPtr fw,
|
|
virFirewallLayer layer,
|
|
const char *iface)
|
|
{
|
|
iptablesForwardRejectOut(fw, layer, deletePrivate, iface, REMOVE);
|
|
}
|
|
|
|
|
|
static void
|
|
iptablesForwardRejectIn(virFirewallPtr fw,
|
|
virFirewallLayer layer,
|
|
bool pvt,
|
|
const char *iface,
|
|
int action)
|
|
{
|
|
virFirewallAddRule(fw, layer,
|
|
"--table", "filter",
|
|
action == ADD ? "--insert" : "--delete",
|
|
pvt ? "LIBVIRT_FWI" : "FORWARD",
|
|
"--out-interface", iface,
|
|
"--jump", "REJECT",
|
|
NULL);
|
|
}
|
|
|
|
/**
|
|
* iptablesAddForwardRejectIn:
|
|
* @ctx: pointer to the IP table context
|
|
* @iface: the input interface name
|
|
*
|
|
* Add rules to the IP table context to forbid all traffic from that
|
|
* interface. It forbids forwarding from that interface to the bridge.
|
|
*
|
|
* Returns 0 in case of success or an error code otherwise
|
|
*/
|
|
void
|
|
iptablesAddForwardRejectIn(virFirewallPtr fw,
|
|
virFirewallLayer layer,
|
|
const char *iface)
|
|
{
|
|
iptablesForwardRejectIn(fw, layer, true, iface, ADD);
|
|
}
|
|
|
|
/**
|
|
* iptablesRemoveForwardRejectIn:
|
|
* @ctx: pointer to the IP table context
|
|
* @iface: the input interface name
|
|
*
|
|
* Remove rules from the IP table context forbidding all traffic from that
|
|
* interface. It allows forwarding from that interface to the bridge.
|
|
*
|
|
* Returns 0 in case of success or an error code otherwise
|
|
*/
|
|
void
|
|
iptablesRemoveForwardRejectIn(virFirewallPtr fw,
|
|
virFirewallLayer layer,
|
|
const char *iface)
|
|
{
|
|
iptablesForwardRejectIn(fw, layer, deletePrivate, iface, REMOVE);
|
|
}
|
|
|
|
|
|
/* Masquerade all traffic coming from the network associated
|
|
* with the bridge
|
|
*/
|
|
static int
|
|
iptablesForwardMasquerade(virFirewallPtr fw,
|
|
bool pvt,
|
|
virSocketAddr *netaddr,
|
|
unsigned int prefix,
|
|
const char *physdev,
|
|
virSocketAddrRangePtr addr,
|
|
virPortRangePtr port,
|
|
const char *protocol,
|
|
int action)
|
|
{
|
|
g_autofree char *networkstr = NULL;
|
|
g_autofree char *addrStartStr = NULL;
|
|
g_autofree char *addrEndStr = NULL;
|
|
g_autofree char *portRangeStr = NULL;
|
|
g_autofree char *natRangeStr = NULL;
|
|
virFirewallRulePtr rule;
|
|
int af = VIR_SOCKET_ADDR_FAMILY(netaddr);
|
|
virFirewallLayer layer = af == AF_INET ?
|
|
VIR_FIREWALL_LAYER_IPV4 : VIR_FIREWALL_LAYER_IPV6;
|
|
|
|
if (!(networkstr = iptablesFormatNetwork(netaddr, prefix)))
|
|
return -1;
|
|
|
|
if (VIR_SOCKET_ADDR_IS_FAMILY(&addr->start, af)) {
|
|
if (!(addrStartStr = virSocketAddrFormat(&addr->start)))
|
|
return -1;
|
|
if (VIR_SOCKET_ADDR_IS_FAMILY(&addr->end, af)) {
|
|
if (!(addrEndStr = virSocketAddrFormat(&addr->end)))
|
|
return -1;
|
|
}
|
|
}
|
|
|
|
if (protocol && protocol[0]) {
|
|
rule = virFirewallAddRule(fw, layer,
|
|
"--table", "nat",
|
|
action == ADD ? "--insert" : "--delete",
|
|
pvt ? "LIBVIRT_PRT" : "POSTROUTING",
|
|
"--source", networkstr,
|
|
"-p", protocol,
|
|
"!", "--destination", networkstr,
|
|
NULL);
|
|
} else {
|
|
rule = virFirewallAddRule(fw, layer,
|
|
"--table", "nat",
|
|
action == ADD ? "--insert" : "--delete",
|
|
pvt ? "LIBVIRT_PRT" : "POSTROUTING",
|
|
"--source", networkstr,
|
|
"!", "--destination", networkstr,
|
|
NULL);
|
|
}
|
|
|
|
if (physdev && physdev[0])
|
|
virFirewallRuleAddArgList(fw, rule, "--out-interface", physdev, NULL);
|
|
|
|
if (protocol && protocol[0]) {
|
|
if (port->start == 0 && port->end == 0) {
|
|
port->start = 1024;
|
|
port->end = 65535;
|
|
}
|
|
|
|
if (port->start < port->end && port->end < 65536) {
|
|
portRangeStr = g_strdup_printf(":%u-%u", port->start, port->end);
|
|
} else {
|
|
virReportError(VIR_ERR_INTERNAL_ERROR,
|
|
_("Invalid port range '%u-%u'."),
|
|
port->start, port->end);
|
|
return -1;
|
|
}
|
|
}
|
|
|
|
/* Use --jump SNAT if public addr is specified */
|
|
if (addrStartStr && addrStartStr[0]) {
|
|
if (addrEndStr && addrEndStr[0]) {
|
|
natRangeStr = g_strdup_printf("%s-%s%s", addrStartStr, addrEndStr,
|
|
portRangeStr ? portRangeStr : "");
|
|
} else {
|
|
natRangeStr = g_strdup_printf("%s%s", addrStartStr,
|
|
portRangeStr ? portRangeStr : "");
|
|
}
|
|
|
|
virFirewallRuleAddArgList(fw, rule,
|
|
"--jump", "SNAT",
|
|
"--to-source", natRangeStr, NULL);
|
|
} else {
|
|
virFirewallRuleAddArgList(fw, rule,
|
|
"--jump", "MASQUERADE", NULL);
|
|
|
|
if (portRangeStr && portRangeStr[0])
|
|
virFirewallRuleAddArgList(fw, rule,
|
|
"--to-ports", &portRangeStr[1], NULL);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* iptablesAddForwardMasquerade:
|
|
* @ctx: pointer to the IP table context
|
|
* @network: the source network name
|
|
* @physdev: the physical input device or NULL
|
|
* @protocol: the network protocol or NULL
|
|
*
|
|
* Add rules to the IP table context to allow masquerading
|
|
* network @network on @physdev. This allow the bridge to
|
|
* masquerade for that network (on @physdev).
|
|
*
|
|
* Returns 0 in case of success or an error code otherwise
|
|
*/
|
|
int
|
|
iptablesAddForwardMasquerade(virFirewallPtr fw,
|
|
virSocketAddr *netaddr,
|
|
unsigned int prefix,
|
|
const char *physdev,
|
|
virSocketAddrRangePtr addr,
|
|
virPortRangePtr port,
|
|
const char *protocol)
|
|
{
|
|
return iptablesForwardMasquerade(fw, true, netaddr, prefix,
|
|
physdev, addr, port, protocol, ADD);
|
|
}
|
|
|
|
/**
|
|
* iptablesRemoveForwardMasquerade:
|
|
* @ctx: pointer to the IP table context
|
|
* @network: the source network name
|
|
* @physdev: the physical input device or NULL
|
|
* @protocol: the network protocol or NULL
|
|
*
|
|
* Remove rules from the IP table context to stop masquerading
|
|
* network @network on @physdev. This stops the bridge from
|
|
* masquerading for that network (on @physdev).
|
|
*
|
|
* Returns 0 in case of success or an error code otherwise
|
|
*/
|
|
int
|
|
iptablesRemoveForwardMasquerade(virFirewallPtr fw,
|
|
virSocketAddr *netaddr,
|
|
unsigned int prefix,
|
|
const char *physdev,
|
|
virSocketAddrRangePtr addr,
|
|
virPortRangePtr port,
|
|
const char *protocol)
|
|
{
|
|
return iptablesForwardMasquerade(fw, deletePrivate, netaddr, prefix,
|
|
physdev, addr, port, protocol, REMOVE);
|
|
}
|
|
|
|
|
|
/* Don't masquerade traffic coming from the network associated with the bridge
|
|
* if said traffic targets @destaddr.
|
|
*/
|
|
static int
|
|
iptablesForwardDontMasquerade(virFirewallPtr fw,
|
|
bool pvt,
|
|
virSocketAddr *netaddr,
|
|
unsigned int prefix,
|
|
const char *physdev,
|
|
const char *destaddr,
|
|
int action)
|
|
{
|
|
g_autofree char *networkstr = NULL;
|
|
virFirewallLayer layer = VIR_SOCKET_ADDR_FAMILY(netaddr) == AF_INET ?
|
|
VIR_FIREWALL_LAYER_IPV4 : VIR_FIREWALL_LAYER_IPV6;
|
|
|
|
if (!(networkstr = iptablesFormatNetwork(netaddr, prefix)))
|
|
return -1;
|
|
|
|
if (physdev && physdev[0])
|
|
virFirewallAddRule(fw, layer,
|
|
"--table", "nat",
|
|
action == ADD ? "--insert" : "--delete",
|
|
pvt ? "LIBVIRT_PRT" : "POSTROUTING",
|
|
"--out-interface", physdev,
|
|
"--source", networkstr,
|
|
"--destination", destaddr,
|
|
"--jump", "RETURN",
|
|
NULL);
|
|
else
|
|
virFirewallAddRule(fw, layer,
|
|
"--table", "nat",
|
|
action == ADD ? "--insert" : "--delete",
|
|
pvt ? "LIBVIRT_PRT" : "POSTROUTING",
|
|
"--source", networkstr,
|
|
"--destination", destaddr,
|
|
"--jump", "RETURN",
|
|
NULL);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* iptablesAddDontMasquerade:
|
|
* @netaddr: the source network name
|
|
* @prefix: prefix (# of 1 bits) of netmask to apply to @netaddr
|
|
* @physdev: the physical output device or NULL
|
|
* @destaddr: the destination network not to masquerade for
|
|
*
|
|
* Add rules to the IP table context to avoid masquerading from
|
|
* @netaddr/@prefix to @destaddr on @physdev. @destaddr must be in a format
|
|
* directly consumable by iptables, it must not depend on user input or
|
|
* configuration.
|
|
*
|
|
* Returns 0 in case of success or an error code otherwise.
|
|
*/
|
|
int
|
|
iptablesAddDontMasquerade(virFirewallPtr fw,
|
|
virSocketAddr *netaddr,
|
|
unsigned int prefix,
|
|
const char *physdev,
|
|
const char *destaddr)
|
|
{
|
|
return iptablesForwardDontMasquerade(fw, true, netaddr, prefix,
|
|
physdev, destaddr, ADD);
|
|
}
|
|
|
|
/**
|
|
* iptablesRemoveDontMasquerade:
|
|
* @netaddr: the source network name
|
|
* @prefix: prefix (# of 1 bits) of netmask to apply to @netaddr
|
|
* @physdev: the physical output device or NULL
|
|
* @destaddr: the destination network not to masquerade for
|
|
*
|
|
* Remove rules from the IP table context that prevent masquerading from
|
|
* @netaddr/@prefix to @destaddr on @physdev. @destaddr must be in a format
|
|
* directly consumable by iptables, it must not depend on user input or
|
|
* configuration.
|
|
*
|
|
* Returns 0 in case of success or an error code otherwise.
|
|
*/
|
|
int
|
|
iptablesRemoveDontMasquerade(virFirewallPtr fw,
|
|
virSocketAddr *netaddr,
|
|
unsigned int prefix,
|
|
const char *physdev,
|
|
const char *destaddr)
|
|
{
|
|
return iptablesForwardDontMasquerade(fw, deletePrivate, netaddr, prefix,
|
|
physdev, destaddr, REMOVE);
|
|
}
|
|
|
|
|
|
static void
|
|
iptablesOutputFixUdpChecksum(virFirewallPtr fw,
|
|
bool pvt,
|
|
const char *iface,
|
|
int port,
|
|
int action)
|
|
{
|
|
char portstr[32];
|
|
|
|
g_snprintf(portstr, sizeof(portstr), "%d", port);
|
|
portstr[sizeof(portstr) - 1] = '\0';
|
|
|
|
virFirewallAddRule(fw, VIR_FIREWALL_LAYER_IPV4,
|
|
"--table", "mangle",
|
|
action == ADD ? "--insert" : "--delete",
|
|
pvt ? "LIBVIRT_PRT" : "POSTROUTING",
|
|
"--out-interface", iface,
|
|
"--protocol", "udp",
|
|
"--destination-port", portstr,
|
|
"--jump", "CHECKSUM", "--checksum-fill",
|
|
NULL);
|
|
}
|
|
|
|
/**
|
|
* iptablesAddOutputFixUdpChecksum:
|
|
* @ctx: pointer to the IP table context
|
|
* @iface: the interface name
|
|
* @port: the UDP port to match
|
|
*
|
|
* Add a rule to the mangle table's POSTROUTING chain that fixes up the
|
|
* checksum of packets with the given destination @port.
|
|
* the given @iface interface for TCP packets.
|
|
*
|
|
*/
|
|
void
|
|
iptablesAddOutputFixUdpChecksum(virFirewallPtr fw,
|
|
const char *iface,
|
|
int port)
|
|
{
|
|
iptablesOutputFixUdpChecksum(fw, true, iface, port, ADD);
|
|
}
|
|
|
|
/**
|
|
* iptablesRemoveOutputFixUdpChecksum:
|
|
* @ctx: pointer to the IP table context
|
|
* @iface: the interface name
|
|
* @port: the UDP port of the rule to remove
|
|
*
|
|
* Removes the checksum fixup rule that was previous added with
|
|
* iptablesAddOutputFixUdpChecksum.
|
|
*/
|
|
void
|
|
iptablesRemoveOutputFixUdpChecksum(virFirewallPtr fw,
|
|
const char *iface,
|
|
int port)
|
|
{
|
|
iptablesOutputFixUdpChecksum(fw, deletePrivate, iface, port, REMOVE);
|
|
}
|