External/passt
1
0
Fork 0
mirror of https://passt.top/passt synced 2024-06-23 03:27:05 +00:00
Code Issues Packages Projects Releases Wiki Activity
master
passt/test/distro/debian

253 lines
8.0 KiB
Plaintext
Raw Permalink Normal View History

passt: Relicense to GPL 2.0, or any later version In practical terms, passt doesn't benefit from the additional protection offered by the AGPL over the GPL, because it's not suitable to be executed over a computer network. Further, restricting the distribution under the version 3 of the GPL wouldn't provide any practical advantage either, as long as the passt codebase is concerned, and might cause unnecessary compatibility dilemmas. Change licensing terms to the GNU General Public License Version 2, or any later version, with written permission from all current and past contributors, namely: myself, David Gibson, Laine Stump, Andrea Bolognani, Paul Holzinger, Richard W.M. Jones, Chris Kuhn, Florian Weimer, Giuseppe Scrivano, Stefan Hajnoczi, and Vasiliy Ulyanov. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2023-04-05 18:11:44 +00:00
# SPDX-License-Identifier: GPL-2.0-or-later
test: Add distribution tests for several architectures and kernel versions The new tests check build and a simple case with pasta sending a short message in both directions (namespace to init, init to namespace). Tests cover a mix of Debian, Fedora, OpenSUSE and Ubuntu combinations on aarch64, i386, ppc64, ppc64le, s390x, x86_64. Builds tested starting from approximately glibc 2.19, gcc 4.7, and actual functionality approximately from 4.4 kernels, glibc 2.25, gcc 4.8, all the way up to current glibc/gcc/kernel versions. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2022-01-26 06:45:16 +00:00
#
# PASST - Plug A Simple Socket Transport
# for qemu/UNIX domain socket mode
#
# PASTA - Pack A Subtle Tap Abstraction
# for network namespace/tap device mode
#
# test/distro/debian - Debian builds, get packages via passt, test pasta
#
# Copyright (c) 2021 Red Hat GmbH
# Author: Stefano Brivio <sbrivio@redhat.com>
test: Use paths in __STATEDIR__ instead of 'temp' and 'tempdir' directives Instead of using the 'temp' and 'tempdir' DSL directives to create temporary files, use fixed paths relative to __STATEDIR__. This has two advantages: 1) The files are automatically cleaned up if the tests fail (and even if that doesn't work they're easier to clean up manuall) 2) When debugging tests it's easier to figure out which of the temporary files are relevant to whatever's going wrong Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2022-09-13 04:35:23 +00:00
set PIDFILE __STATEDIR__/passt.pid
tests: Remove unused DNS6 calculation from fedora tests The Fedora test file extracts some information from the host resolv.conf into a DNS6 variable which is then never used. Remove this unnecessary step, which is presumably a leftover from an earlier iteration. This was the only user of 'head' and 'sed' in the test file, so those can also be removed from the required tools. The debian and ubuntu test files also listed 'head' and 'sed' as tools, although they don't use them, I'm guessing because of an earlier version which had the same DNS6 code. Remove those as well. The opensuse test file still actually uses DNS6, so leave it there for now. The DNS handling and network config handling for SuSE looks to be kind of broken, but fixing that is a job for another day. Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2022-07-06 07:29:09 +00:00
htools cat kill qemu-system-x86_64 qemu-system-aarch64 qemu-system-ppc64
test: Add distribution tests for several architectures and kernel versions The new tests check build and a simple case with pasta sending a short message in both directions (namespace to init, init to namespace). Tests cover a mix of Debian, Fedora, OpenSUSE and Ubuntu combinations on aarch64, i386, ppc64, ppc64le, s390x, x86_64. Builds tested starting from approximately glibc 2.19, gcc 4.7, and actual functionality approximately from 4.4 kernels, glibc 2.25, gcc 4.8, all the way up to current glibc/gcc/kernel versions. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2022-01-26 06:45:16 +00:00
# Quick pasta test: send message from init to ns, and from ns to init
def distro_quick_pasta_test
host export SHELL="/bin/dash"
host dash
test: Convert distro tests to use socat instead of nc/ncat We've recently converted most of our tests to use socat instead of nc/netcat/ncat, because socat is more powerful and we don't need to deal with the several possible variants of netcat. We still use nc or ncat for the distro tests. Because there we control the guest environment and can pick our tools, there isn't the same reason to switch to socat. However, using socat here as well makes the tests a bit easier to read, and doesn't require people reading or modifying them to become familiar with an additional tool. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> [sbrivio: keep using netcat-openbsd in Ubuntu 16.04 ppc64 test, as socat is unavailable there] Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2022-08-18 06:13:49 +00:00
host (socat -u TCP6-LISTEN:10000 OPEN:/tmp/init_msg,create,trunc; echo "from_init" | socat -u STDIN TCP6:[::1]:9999) &
test: Add distribution tests for several architectures and kernel versions The new tests check build and a simple case with pasta sending a short message in both directions (namespace to init, init to namespace). Tests cover a mix of Debian, Fedora, OpenSUSE and Ubuntu combinations on aarch64, i386, ppc64, ppc64le, s390x, x86_64. Builds tested starting from approximately glibc 2.19, gcc 4.7, and actual functionality approximately from 4.4 kernels, glibc 2.25, gcc 4.8, all the way up to current glibc/gcc/kernel versions. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2022-01-26 06:45:16 +00:00
hostb ./pasta
sleep 1
test: Convert distro tests to use socat instead of nc/ncat We've recently converted most of our tests to use socat instead of nc/netcat/ncat, because socat is more powerful and we don't need to deal with the several possible variants of netcat. We still use nc or ncat for the distro tests. Because there we control the guest environment and can pick our tools, there isn't the same reason to switch to socat. However, using socat here as well makes the tests a bit easier to read, and doesn't require people reading or modifying them to become familiar with an additional tool. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> [sbrivio: keep using netcat-openbsd in Ubuntu 16.04 ppc64 test, as socat is unavailable there] Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2022-08-18 06:13:49 +00:00
host socat -u TCP6-LISTEN:9999 OPEN:/tmp/ns_msg,create,trunc &
test: Add distribution tests for several architectures and kernel versions The new tests check build and a simple case with pasta sending a short message in both directions (namespace to init, init to namespace). Tests cover a mix of Debian, Fedora, OpenSUSE and Ubuntu combinations on aarch64, i386, ppc64, ppc64le, s390x, x86_64. Builds tested starting from approximately glibc 2.19, gcc 4.7, and actual functionality approximately from 4.4 kernels, glibc 2.25, gcc 4.8, all the way up to current glibc/gcc/kernel versions. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2022-01-26 06:45:16 +00:00
sleep 2
test: Convert distro tests to use socat instead of nc/ncat We've recently converted most of our tests to use socat instead of nc/netcat/ncat, because socat is more powerful and we don't need to deal with the several possible variants of netcat. We still use nc or ncat for the distro tests. Because there we control the guest environment and can pick our tools, there isn't the same reason to switch to socat. However, using socat here as well makes the tests a bit easier to read, and doesn't require people reading or modifying them to become familiar with an additional tool. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> [sbrivio: keep using netcat-openbsd in Ubuntu 16.04 ppc64 test, as socat is unavailable there] Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2022-08-18 06:13:49 +00:00
host echo "from_ns" | socat -u STDIN TCP6:[::1]:10000
test: Add distribution tests for several architectures and kernel versions The new tests check build and a simple case with pasta sending a short message in both directions (namespace to init, init to namespace). Tests cover a mix of Debian, Fedora, OpenSUSE and Ubuntu combinations on aarch64, i386, ppc64, ppc64le, s390x, x86_64. Builds tested starting from approximately glibc 2.19, gcc 4.7, and actual functionality approximately from 4.4 kernels, glibc 2.25, gcc 4.8, all the way up to current glibc/gcc/kernel versions. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2022-01-26 06:45:16 +00:00
sleep 2
host echo
test/distro: Avoid race between display of ns_msg and netcat exiting The shell might report 'nc -6 -l -p 9999 > /tmp/ns_msg' as done even after the subsequent 'echo' is done: wait one second before reading out /tmp/ns_msg, to ensure we read that instead of the "Done" message. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2022-01-30 02:09:46 +00:00
sleep 1
test: Add distribution tests for several architectures and kernel versions The new tests check build and a simple case with pasta sending a short message in both directions (namespace to init, init to namespace). Tests cover a mix of Debian, Fedora, OpenSUSE and Ubuntu combinations on aarch64, i386, ppc64, ppc64le, s390x, x86_64. Builds tested starting from approximately glibc 2.19, gcc 4.7, and actual functionality approximately from 4.4 kernels, glibc 2.25, gcc 4.8, all the way up to current glibc/gcc/kernel versions. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2022-01-26 06:45:16 +00:00
hout NS_MSG cat /tmp/ns_msg
check [ __NS_MSG__ = "from_init" ]
hostb exit
host echo
hout INIT_MSG cat /tmp/init_msg
check [ __INIT_MSG__ = "from_ns" ]
endef
# Start passt, set common variables
test: Switch to qemu -netdev stream option instead of using qrap qemu commit 13c6be96618c ("net: stream: add unix socket") introduces support for native AF_UNIX support, finally making qrap useless. We can't quite drop that yet until a qemu release includes it, and then we'll need to wait a while for users to switch anyway, but at least for tests, we can use that support. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2022-11-04 01:16:21 +00:00
hostb ./passt -s __STATEDIR__/passt.socket -P __PIDFILE__ &
test: Add distribution tests for several architectures and kernel versions The new tests check build and a simple case with pasta sending a short message in both directions (namespace to init, init to namespace). Tests cover a mix of Debian, Fedora, OpenSUSE and Ubuntu combinations on aarch64, i386, ppc64, ppc64le, s390x, x86_64. Builds tested starting from approximately glibc 2.19, gcc 4.7, and actual functionality approximately from 4.4 kernels, glibc 2.25, gcc 4.8, all the way up to current glibc/gcc/kernel versions. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2022-01-26 06:45:16 +00:00
sleep 1
host echo
test Debian GNU/Linux 8 (jessie), amd64
test: Switch to qemu -netdev stream option instead of using qrap qemu commit 13c6be96618c ("net: stream: add unix socket") introduces support for native AF_UNIX support, finally making qrap useless. We can't quite drop that yet until a qemu release includes it, and then we'll need to wait a while for users to switch anyway, but at least for tests, we can use that support. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2022-11-04 01:16:21 +00:00
host qemu-system-x86_64 -M pc,accel=kvm:tcg -m 1024 -nographic -serial stdio -nodefaults -no-reboot -nographic -vga none -drive file=__BASEPATH__/prepared-debian-8.11.0-openstack-amd64.qcow2,if=virtio -device virtio-net-pci,netdev=s0 -netdev stream,id=s0,server=off,addr.type=unix,addr.path=__STATEDIR__/passt.socket -snapshot
test: Add distribution tests for several architectures and kernel versions The new tests check build and a simple case with pasta sending a short message in both directions (namespace to init, init to namespace). Tests cover a mix of Debian, Fedora, OpenSUSE and Ubuntu combinations on aarch64, i386, ppc64, ppc64le, s390x, x86_64. Builds tested starting from approximately glibc 2.19, gcc 4.7, and actual functionality approximately from 4.4 kernels, glibc 2.25, gcc 4.8, all the way up to current glibc/gcc/kernel versions. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2022-01-26 06:45:16 +00:00
host PS1='$ '
sleep 2
host apt-get update
test: Convert distro tests to use socat instead of nc/ncat We've recently converted most of our tests to use socat instead of nc/netcat/ncat, because socat is more powerful and we don't need to deal with the several possible variants of netcat. We still use nc or ncat for the distro tests. Because there we control the guest environment and can pick our tools, there isn't the same reason to switch to socat. However, using socat here as well makes the tests a bit easier to read, and doesn't require people reading or modifying them to become familiar with an additional tool. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> [sbrivio: keep using netcat-openbsd in Ubuntu 16.04 ppc64 test, as socat is unavailable there] Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2022-08-18 06:13:49 +00:00
host apt-get -y install make gcc socat
test: Add distribution tests for several architectures and kernel versions The new tests check build and a simple case with pasta sending a short message in both directions (namespace to init, init to namespace). Tests cover a mix of Debian, Fedora, OpenSUSE and Ubuntu combinations on aarch64, i386, ppc64, ppc64le, s390x, x86_64. Builds tested starting from approximately glibc 2.19, gcc 4.7, and actual functionality approximately from 4.4 kernels, glibc 2.25, gcc 4.8, all the way up to current glibc/gcc/kernel versions. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2022-01-26 06:45:16 +00:00
host make clean
tests: Simplify explicit checks for command success A number of individual test cases use '*out' commands to check for success of specific commands they've issued. Now that the test harness is testing for success of all issued commands as a matter of course, we no longer need to do this. Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2022-05-12 06:43:33 +00:00
host CFLAGS="-Wno-missing-field-initializers -Wno-missing-braces -Wno-type-limits" make
test: Add distribution tests for several architectures and kernel versions The new tests check build and a simple case with pasta sending a short message in both directions (namespace to init, init to namespace). Tests cover a mix of Debian, Fedora, OpenSUSE and Ubuntu combinations on aarch64, i386, ppc64, ppc64le, s390x, x86_64. Builds tested starting from approximately glibc 2.19, gcc 4.7, and actual functionality approximately from 4.4 kernels, glibc 2.25, gcc 4.8, all the way up to current glibc/gcc/kernel versions. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2022-01-26 06:45:16 +00:00
# TODO: pasta test skipped for the moment: clone() as called by NS_CALL hangs
# with wrapper provided by glibc 2.19, probably wrong argument order.
hint
sleep 1
# PIDFILE is cleaned up when the next test starts, read it now
hout PID cat __PIDFILE__
test Debian GNU/Linux 9 (stretch, oldoldstable), amd64
test: Switch to qemu -netdev stream option instead of using qrap qemu commit 13c6be96618c ("net: stream: add unix socket") introduces support for native AF_UNIX support, finally making qrap useless. We can't quite drop that yet until a qemu release includes it, and then we'll need to wait a while for users to switch anyway, but at least for tests, we can use that support. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2022-11-04 01:16:21 +00:00
host qemu-system-x86_64 -M pc,accel=kvm:tcg -m 1024 -nographic -serial stdio -nodefaults -no-reboot -nographic -vga none __BASEPATH__/prepared-debian-9-nocloud-amd64-daily-20200210-166.qcow2 -device virtio-net-pci,netdev=s0 -netdev stream,id=s0,server=off,addr.type=unix,addr.path=__STATEDIR__/passt.socket -snapshot
test: Add distribution tests for several architectures and kernel versions The new tests check build and a simple case with pasta sending a short message in both directions (namespace to init, init to namespace). Tests cover a mix of Debian, Fedora, OpenSUSE and Ubuntu combinations on aarch64, i386, ppc64, ppc64le, s390x, x86_64. Builds tested starting from approximately glibc 2.19, gcc 4.7, and actual functionality approximately from 4.4 kernels, glibc 2.25, gcc 4.8, all the way up to current glibc/gcc/kernel versions. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2022-01-26 06:45:16 +00:00
host PS1='$ '
sleep 2
host apt-get update
test: Convert distro tests to use socat instead of nc/ncat We've recently converted most of our tests to use socat instead of nc/netcat/ncat, because socat is more powerful and we don't need to deal with the several possible variants of netcat. We still use nc or ncat for the distro tests. Because there we control the guest environment and can pick our tools, there isn't the same reason to switch to socat. However, using socat here as well makes the tests a bit easier to read, and doesn't require people reading or modifying them to become familiar with an additional tool. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> [sbrivio: keep using netcat-openbsd in Ubuntu 16.04 ppc64 test, as socat is unavailable there] Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2022-08-18 06:13:49 +00:00
host apt-get -y install make gcc socat
test: Add distribution tests for several architectures and kernel versions The new tests check build and a simple case with pasta sending a short message in both directions (namespace to init, init to namespace). Tests cover a mix of Debian, Fedora, OpenSUSE and Ubuntu combinations on aarch64, i386, ppc64, ppc64le, s390x, x86_64. Builds tested starting from approximately glibc 2.19, gcc 4.7, and actual functionality approximately from 4.4 kernels, glibc 2.25, gcc 4.8, all the way up to current glibc/gcc/kernel versions. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2022-01-26 06:45:16 +00:00
host make clean
tests: Simplify explicit checks for command success A number of individual test cases use '*out' commands to check for success of specific commands they've issued. Now that the test harness is testing for success of all issued commands as a matter of course, we no longer need to do this. Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2022-05-12 06:43:33 +00:00
host CFLAGS="-Werror" make
test: Add distribution tests for several architectures and kernel versions The new tests check build and a simple case with pasta sending a short message in both directions (namespace to init, init to namespace). Tests cover a mix of Debian, Fedora, OpenSUSE and Ubuntu combinations on aarch64, i386, ppc64, ppc64le, s390x, x86_64. Builds tested starting from approximately glibc 2.19, gcc 4.7, and actual functionality approximately from 4.4 kernels, glibc 2.25, gcc 4.8, all the way up to current glibc/gcc/kernel versions. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2022-01-26 06:45:16 +00:00
test/distro: Set unprivileged_userns_clone on Debian Buster and earlier Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2022-04-06 07:48:40 +00:00
host sysctl -w kernel.unprivileged_userns_clone=1
test: Add distribution tests for several architectures and kernel versions The new tests check build and a simple case with pasta sending a short message in both directions (namespace to init, init to namespace). Tests cover a mix of Debian, Fedora, OpenSUSE and Ubuntu combinations on aarch64, i386, ppc64, ppc64le, s390x, x86_64. Builds tested starting from approximately glibc 2.19, gcc 4.7, and actual functionality approximately from 4.4 kernels, glibc 2.25, gcc 4.8, all the way up to current glibc/gcc/kernel versions. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2022-01-26 06:45:16 +00:00
distro_quick_pasta_test
hint
sleep 1
test Debian GNU/Linux 10 (buster, oldstable), amd64
test: Switch to qemu -netdev stream option instead of using qrap qemu commit 13c6be96618c ("net: stream: add unix socket") introduces support for native AF_UNIX support, finally making qrap useless. We can't quite drop that yet until a qemu release includes it, and then we'll need to wait a while for users to switch anyway, but at least for tests, we can use that support. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2022-11-04 01:16:21 +00:00
host qemu-system-x86_64 -M pc,accel=kvm:tcg -m 1024 -nographic -serial stdio -nodefaults -no-reboot -nographic -vga none __BASEPATH__/prepared-debian-10-nocloud-amd64.qcow2 -device virtio-net-pci,netdev=s0 -netdev stream,id=s0,server=off,addr.type=unix,addr.path=__STATEDIR__/passt.socket -snapshot
test: Add distribution tests for several architectures and kernel versions The new tests check build and a simple case with pasta sending a short message in both directions (namespace to init, init to namespace). Tests cover a mix of Debian, Fedora, OpenSUSE and Ubuntu combinations on aarch64, i386, ppc64, ppc64le, s390x, x86_64. Builds tested starting from approximately glibc 2.19, gcc 4.7, and actual functionality approximately from 4.4 kernels, glibc 2.25, gcc 4.8, all the way up to current glibc/gcc/kernel versions. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2022-01-26 06:45:16 +00:00
host PS1='$ '
sleep 2
host apt-get update
test: Convert distro tests to use socat instead of nc/ncat We've recently converted most of our tests to use socat instead of nc/netcat/ncat, because socat is more powerful and we don't need to deal with the several possible variants of netcat. We still use nc or ncat for the distro tests. Because there we control the guest environment and can pick our tools, there isn't the same reason to switch to socat. However, using socat here as well makes the tests a bit easier to read, and doesn't require people reading or modifying them to become familiar with an additional tool. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> [sbrivio: keep using netcat-openbsd in Ubuntu 16.04 ppc64 test, as socat is unavailable there] Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2022-08-18 06:13:49 +00:00
host apt-get -y install make gcc socat
test: Add distribution tests for several architectures and kernel versions The new tests check build and a simple case with pasta sending a short message in both directions (namespace to init, init to namespace). Tests cover a mix of Debian, Fedora, OpenSUSE and Ubuntu combinations on aarch64, i386, ppc64, ppc64le, s390x, x86_64. Builds tested starting from approximately glibc 2.19, gcc 4.7, and actual functionality approximately from 4.4 kernels, glibc 2.25, gcc 4.8, all the way up to current glibc/gcc/kernel versions. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2022-01-26 06:45:16 +00:00
host make clean
tests: Simplify explicit checks for command success A number of individual test cases use '*out' commands to check for success of specific commands they've issued. Now that the test harness is testing for success of all issued commands as a matter of course, we no longer need to do this. Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2022-05-12 06:43:33 +00:00
host CFLAGS="-Werror" make
test: Add distribution tests for several architectures and kernel versions The new tests check build and a simple case with pasta sending a short message in both directions (namespace to init, init to namespace). Tests cover a mix of Debian, Fedora, OpenSUSE and Ubuntu combinations on aarch64, i386, ppc64, ppc64le, s390x, x86_64. Builds tested starting from approximately glibc 2.19, gcc 4.7, and actual functionality approximately from 4.4 kernels, glibc 2.25, gcc 4.8, all the way up to current glibc/gcc/kernel versions. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2022-01-26 06:45:16 +00:00
test/distro: Set unprivileged_userns_clone on Debian Buster and earlier Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2022-04-06 07:48:40 +00:00
host sysctl -w kernel.unprivileged_userns_clone=1
test: Add distribution tests for several architectures and kernel versions The new tests check build and a simple case with pasta sending a short message in both directions (namespace to init, init to namespace). Tests cover a mix of Debian, Fedora, OpenSUSE and Ubuntu combinations on aarch64, i386, ppc64, ppc64le, s390x, x86_64. Builds tested starting from approximately glibc 2.19, gcc 4.7, and actual functionality approximately from 4.4 kernels, glibc 2.25, gcc 4.8, all the way up to current glibc/gcc/kernel versions. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2022-01-26 06:45:16 +00:00
distro_quick_pasta_test
hint
sleep 1
test Debian GNU/Linux 10 (buster, oldstable), aarch64
test: Switch to qemu -netdev stream option instead of using qrap qemu commit 13c6be96618c ("net: stream: add unix socket") introduces support for native AF_UNIX support, finally making qrap useless. We can't quite drop that yet until a qemu release includes it, and then we'll need to wait a while for users to switch anyway, but at least for tests, we can use that support. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2022-11-04 01:16:21 +00:00
host qemu-system-aarch64 -m 2048 -cpu cortex-a57 -smp 2 -M virt -bios __BASEPATH__/QEMU_EFI.fd -nographic -serial stdio -nodefaults -no-reboot -nographic -vga none __BASEPATH__/prepared-debian-10-generic-arm64.qcow2 -device virtio-net-pci,netdev=s0 -netdev stream,id=s0,server=off,addr.type=unix,addr.path=__STATEDIR__/passt.socket -snapshot
test: Add distribution tests for several architectures and kernel versions The new tests check build and a simple case with pasta sending a short message in both directions (namespace to init, init to namespace). Tests cover a mix of Debian, Fedora, OpenSUSE and Ubuntu combinations on aarch64, i386, ppc64, ppc64le, s390x, x86_64. Builds tested starting from approximately glibc 2.19, gcc 4.7, and actual functionality approximately from 4.4 kernels, glibc 2.25, gcc 4.8, all the way up to current glibc/gcc/kernel versions. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2022-01-26 06:45:16 +00:00
host PS1='$ '
sleep 2
host apt-get update
test: Convert distro tests to use socat instead of nc/ncat We've recently converted most of our tests to use socat instead of nc/netcat/ncat, because socat is more powerful and we don't need to deal with the several possible variants of netcat. We still use nc or ncat for the distro tests. Because there we control the guest environment and can pick our tools, there isn't the same reason to switch to socat. However, using socat here as well makes the tests a bit easier to read, and doesn't require people reading or modifying them to become familiar with an additional tool. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> [sbrivio: keep using netcat-openbsd in Ubuntu 16.04 ppc64 test, as socat is unavailable there] Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2022-08-18 06:13:49 +00:00
host apt-get -y install make gcc socat
test: Add distribution tests for several architectures and kernel versions The new tests check build and a simple case with pasta sending a short message in both directions (namespace to init, init to namespace). Tests cover a mix of Debian, Fedora, OpenSUSE and Ubuntu combinations on aarch64, i386, ppc64, ppc64le, s390x, x86_64. Builds tested starting from approximately glibc 2.19, gcc 4.7, and actual functionality approximately from 4.4 kernels, glibc 2.25, gcc 4.8, all the way up to current glibc/gcc/kernel versions. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2022-01-26 06:45:16 +00:00
host make clean
tests: Simplify explicit checks for command success A number of individual test cases use '*out' commands to check for success of specific commands they've issued. Now that the test harness is testing for success of all issued commands as a matter of course, we no longer need to do this. Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2022-05-12 06:43:33 +00:00
host CFLAGS="-Werror" make
test: Add distribution tests for several architectures and kernel versions The new tests check build and a simple case with pasta sending a short message in both directions (namespace to init, init to namespace). Tests cover a mix of Debian, Fedora, OpenSUSE and Ubuntu combinations on aarch64, i386, ppc64, ppc64le, s390x, x86_64. Builds tested starting from approximately glibc 2.19, gcc 4.7, and actual functionality approximately from 4.4 kernels, glibc 2.25, gcc 4.8, all the way up to current glibc/gcc/kernel versions. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2022-01-26 06:45:16 +00:00
test/distro: Set unprivileged_userns_clone on Debian Buster and earlier Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2022-04-06 07:48:40 +00:00
host sysctl -w kernel.unprivileged_userns_clone=1
test: Add distribution tests for several architectures and kernel versions The new tests check build and a simple case with pasta sending a short message in both directions (namespace to init, init to namespace). Tests cover a mix of Debian, Fedora, OpenSUSE and Ubuntu combinations on aarch64, i386, ppc64, ppc64le, s390x, x86_64. Builds tested starting from approximately glibc 2.19, gcc 4.7, and actual functionality approximately from 4.4 kernels, glibc 2.25, gcc 4.8, all the way up to current glibc/gcc/kernel versions. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2022-01-26 06:45:16 +00:00
distro_quick_pasta_test
hint
sleep 1
test Debian GNU/Linux 10 (buster, oldstable), ppc64le
test: Update location for Debian ppc64 images The current debian cloud images no longer include ppc64. Change to using the latest snapshot which does include ppc64. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2023-02-13 23:37:12 +00:00
host qemu-system-ppc64 -m 2048 -smp 2 -nographic -serial stdio -nodefaults -no-reboot -nographic -vga none __BASEPATH__/prepared-debian-10-generic-ppc64el-20220911-1135.qcow2 -device virtio-net-pci,netdev=s0 -netdev stream,id=s0,server=off,addr.type=unix,addr.path=__STATEDIR__/passt.socket -snapshot
test: Add distribution tests for several architectures and kernel versions The new tests check build and a simple case with pasta sending a short message in both directions (namespace to init, init to namespace). Tests cover a mix of Debian, Fedora, OpenSUSE and Ubuntu combinations on aarch64, i386, ppc64, ppc64le, s390x, x86_64. Builds tested starting from approximately glibc 2.19, gcc 4.7, and actual functionality approximately from 4.4 kernels, glibc 2.25, gcc 4.8, all the way up to current glibc/gcc/kernel versions. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2022-01-26 06:45:16 +00:00
host PS1='$ '
sleep 2
host apt-get update
test: Convert distro tests to use socat instead of nc/ncat We've recently converted most of our tests to use socat instead of nc/netcat/ncat, because socat is more powerful and we don't need to deal with the several possible variants of netcat. We still use nc or ncat for the distro tests. Because there we control the guest environment and can pick our tools, there isn't the same reason to switch to socat. However, using socat here as well makes the tests a bit easier to read, and doesn't require people reading or modifying them to become familiar with an additional tool. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> [sbrivio: keep using netcat-openbsd in Ubuntu 16.04 ppc64 test, as socat is unavailable there] Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2022-08-18 06:13:49 +00:00
host apt-get -y install make gcc socat
test: Add distribution tests for several architectures and kernel versions The new tests check build and a simple case with pasta sending a short message in both directions (namespace to init, init to namespace). Tests cover a mix of Debian, Fedora, OpenSUSE and Ubuntu combinations on aarch64, i386, ppc64, ppc64le, s390x, x86_64. Builds tested starting from approximately glibc 2.19, gcc 4.7, and actual functionality approximately from 4.4 kernels, glibc 2.25, gcc 4.8, all the way up to current glibc/gcc/kernel versions. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2022-01-26 06:45:16 +00:00
host make clean
tests: Simplify explicit checks for command success A number of individual test cases use '*out' commands to check for success of specific commands they've issued. Now that the test harness is testing for success of all issued commands as a matter of course, we no longer need to do this. Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2022-05-12 06:43:33 +00:00
host CFLAGS="-Werror" make
test: Add distribution tests for several architectures and kernel versions The new tests check build and a simple case with pasta sending a short message in both directions (namespace to init, init to namespace). Tests cover a mix of Debian, Fedora, OpenSUSE and Ubuntu combinations on aarch64, i386, ppc64, ppc64le, s390x, x86_64. Builds tested starting from approximately glibc 2.19, gcc 4.7, and actual functionality approximately from 4.4 kernels, glibc 2.25, gcc 4.8, all the way up to current glibc/gcc/kernel versions. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2022-01-26 06:45:16 +00:00
test/distro: Set unprivileged_userns_clone on Debian Buster and earlier Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2022-04-06 07:48:40 +00:00
host sysctl -w kernel.unprivileged_userns_clone=1
test: Add distribution tests for several architectures and kernel versions The new tests check build and a simple case with pasta sending a short message in both directions (namespace to init, init to namespace). Tests cover a mix of Debian, Fedora, OpenSUSE and Ubuntu combinations on aarch64, i386, ppc64, ppc64le, s390x, x86_64. Builds tested starting from approximately glibc 2.19, gcc 4.7, and actual functionality approximately from 4.4 kernels, glibc 2.25, gcc 4.8, all the way up to current glibc/gcc/kernel versions. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2022-01-26 06:45:16 +00:00
distro_quick_pasta_test
hint
sleep 1
hostb reset
test Debian GNU/Linux 11 (bullseye, stable), amd64
test: Switch to qemu -netdev stream option instead of using qrap qemu commit 13c6be96618c ("net: stream: add unix socket") introduces support for native AF_UNIX support, finally making qrap useless. We can't quite drop that yet until a qemu release includes it, and then we'll need to wait a while for users to switch anyway, but at least for tests, we can use that support. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2022-11-04 01:16:21 +00:00
host qemu-system-x86_64 -M pc,accel=kvm:tcg -m 1024 -nographic -serial stdio -nodefaults -no-reboot -nographic -vga none __BASEPATH__/prepared-debian-11-nocloud-amd64.qcow2 -device virtio-net-pci,netdev=s0 -netdev stream,id=s0,server=off,addr.type=unix,addr.path=__STATEDIR__/passt.socket -snapshot
test: Add distribution tests for several architectures and kernel versions The new tests check build and a simple case with pasta sending a short message in both directions (namespace to init, init to namespace). Tests cover a mix of Debian, Fedora, OpenSUSE and Ubuntu combinations on aarch64, i386, ppc64, ppc64le, s390x, x86_64. Builds tested starting from approximately glibc 2.19, gcc 4.7, and actual functionality approximately from 4.4 kernels, glibc 2.25, gcc 4.8, all the way up to current glibc/gcc/kernel versions. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2022-01-26 06:45:16 +00:00
sleep 2
host apt-get update
test: Convert distro tests to use socat instead of nc/ncat We've recently converted most of our tests to use socat instead of nc/netcat/ncat, because socat is more powerful and we don't need to deal with the several possible variants of netcat. We still use nc or ncat for the distro tests. Because there we control the guest environment and can pick our tools, there isn't the same reason to switch to socat. However, using socat here as well makes the tests a bit easier to read, and doesn't require people reading or modifying them to become familiar with an additional tool. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> [sbrivio: keep using netcat-openbsd in Ubuntu 16.04 ppc64 test, as socat is unavailable there] Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2022-08-18 06:13:49 +00:00
host apt-get -y install make gcc socat
test: Add distribution tests for several architectures and kernel versions The new tests check build and a simple case with pasta sending a short message in both directions (namespace to init, init to namespace). Tests cover a mix of Debian, Fedora, OpenSUSE and Ubuntu combinations on aarch64, i386, ppc64, ppc64le, s390x, x86_64. Builds tested starting from approximately glibc 2.19, gcc 4.7, and actual functionality approximately from 4.4 kernels, glibc 2.25, gcc 4.8, all the way up to current glibc/gcc/kernel versions. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2022-01-26 06:45:16 +00:00
host make clean
tests: Simplify explicit checks for command success A number of individual test cases use '*out' commands to check for success of specific commands they've issued. Now that the test harness is testing for success of all issued commands as a matter of course, we no longer need to do this. Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2022-05-12 06:43:33 +00:00
host CFLAGS="-Werror" make
test: Add distribution tests for several architectures and kernel versions The new tests check build and a simple case with pasta sending a short message in both directions (namespace to init, init to namespace). Tests cover a mix of Debian, Fedora, OpenSUSE and Ubuntu combinations on aarch64, i386, ppc64, ppc64le, s390x, x86_64. Builds tested starting from approximately glibc 2.19, gcc 4.7, and actual functionality approximately from 4.4 kernels, glibc 2.25, gcc 4.8, all the way up to current glibc/gcc/kernel versions. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2022-01-26 06:45:16 +00:00
distro_quick_pasta_test
hint
sleep 1
test Debian GNU/Linux 11 (bullseye, stable), aarch64
test: Switch to qemu -netdev stream option instead of using qrap qemu commit 13c6be96618c ("net: stream: add unix socket") introduces support for native AF_UNIX support, finally making qrap useless. We can't quite drop that yet until a qemu release includes it, and then we'll need to wait a while for users to switch anyway, but at least for tests, we can use that support. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2022-11-04 01:16:21 +00:00
host qemu-system-aarch64 -m 2048 -cpu cortex-a57 -smp 2 -M virt -bios __BASEPATH__/QEMU_EFI.fd -nographic -serial stdio -nodefaults -no-reboot -nographic -vga none __BASEPATH__/prepared-debian-11-generic-arm64.qcow2 -device virtio-net-pci,netdev=s0 -netdev stream,id=s0,server=off,addr.type=unix,addr.path=__STATEDIR__/passt.socket -snapshot
test: Add distribution tests for several architectures and kernel versions The new tests check build and a simple case with pasta sending a short message in both directions (namespace to init, init to namespace). Tests cover a mix of Debian, Fedora, OpenSUSE and Ubuntu combinations on aarch64, i386, ppc64, ppc64le, s390x, x86_64. Builds tested starting from approximately glibc 2.19, gcc 4.7, and actual functionality approximately from 4.4 kernels, glibc 2.25, gcc 4.8, all the way up to current glibc/gcc/kernel versions. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2022-01-26 06:45:16 +00:00
sleep 2
host apt-get update
test: Convert distro tests to use socat instead of nc/ncat We've recently converted most of our tests to use socat instead of nc/netcat/ncat, because socat is more powerful and we don't need to deal with the several possible variants of netcat. We still use nc or ncat for the distro tests. Because there we control the guest environment and can pick our tools, there isn't the same reason to switch to socat. However, using socat here as well makes the tests a bit easier to read, and doesn't require people reading or modifying them to become familiar with an additional tool. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> [sbrivio: keep using netcat-openbsd in Ubuntu 16.04 ppc64 test, as socat is unavailable there] Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2022-08-18 06:13:49 +00:00
host apt-get -y install make gcc socat
test: Add distribution tests for several architectures and kernel versions The new tests check build and a simple case with pasta sending a short message in both directions (namespace to init, init to namespace). Tests cover a mix of Debian, Fedora, OpenSUSE and Ubuntu combinations on aarch64, i386, ppc64, ppc64le, s390x, x86_64. Builds tested starting from approximately glibc 2.19, gcc 4.7, and actual functionality approximately from 4.4 kernels, glibc 2.25, gcc 4.8, all the way up to current glibc/gcc/kernel versions. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2022-01-26 06:45:16 +00:00
host make clean
tests: Simplify explicit checks for command success A number of individual test cases use '*out' commands to check for success of specific commands they've issued. Now that the test harness is testing for success of all issued commands as a matter of course, we no longer need to do this. Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2022-05-12 06:43:33 +00:00
host CFLAGS="-Werror" make
test: Add distribution tests for several architectures and kernel versions The new tests check build and a simple case with pasta sending a short message in both directions (namespace to init, init to namespace). Tests cover a mix of Debian, Fedora, OpenSUSE and Ubuntu combinations on aarch64, i386, ppc64, ppc64le, s390x, x86_64. Builds tested starting from approximately glibc 2.19, gcc 4.7, and actual functionality approximately from 4.4 kernels, glibc 2.25, gcc 4.8, all the way up to current glibc/gcc/kernel versions. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2022-01-26 06:45:16 +00:00
distro_quick_pasta_test
hint
sleep 1
test Debian GNU/Linux 11 (bullseye, stable), ppc64le
test: Switch to qemu -netdev stream option instead of using qrap qemu commit 13c6be96618c ("net: stream: add unix socket") introduces support for native AF_UNIX support, finally making qrap useless. We can't quite drop that yet until a qemu release includes it, and then we'll need to wait a while for users to switch anyway, but at least for tests, we can use that support. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2022-11-04 01:16:21 +00:00
host qemu-system-ppc64 -m 2048 -smp 2 -nographic -serial stdio -nodefaults -no-reboot -nographic -vga none __BASEPATH__/prepared-debian-11-generic-ppc64el.qcow2 -device virtio-net-pci,netdev=s0 -netdev stream,id=s0,server=off,addr.type=unix,addr.path=__STATEDIR__/passt.socket -snapshot
test: Add distribution tests for several architectures and kernel versions The new tests check build and a simple case with pasta sending a short message in both directions (namespace to init, init to namespace). Tests cover a mix of Debian, Fedora, OpenSUSE and Ubuntu combinations on aarch64, i386, ppc64, ppc64le, s390x, x86_64. Builds tested starting from approximately glibc 2.19, gcc 4.7, and actual functionality approximately from 4.4 kernels, glibc 2.25, gcc 4.8, all the way up to current glibc/gcc/kernel versions. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2022-01-26 06:45:16 +00:00
sleep 2
host apt-get update
test: Convert distro tests to use socat instead of nc/ncat We've recently converted most of our tests to use socat instead of nc/netcat/ncat, because socat is more powerful and we don't need to deal with the several possible variants of netcat. We still use nc or ncat for the distro tests. Because there we control the guest environment and can pick our tools, there isn't the same reason to switch to socat. However, using socat here as well makes the tests a bit easier to read, and doesn't require people reading or modifying them to become familiar with an additional tool. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> [sbrivio: keep using netcat-openbsd in Ubuntu 16.04 ppc64 test, as socat is unavailable there] Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2022-08-18 06:13:49 +00:00
host apt-get -y install make gcc socat
test: Add distribution tests for several architectures and kernel versions The new tests check build and a simple case with pasta sending a short message in both directions (namespace to init, init to namespace). Tests cover a mix of Debian, Fedora, OpenSUSE and Ubuntu combinations on aarch64, i386, ppc64, ppc64le, s390x, x86_64. Builds tested starting from approximately glibc 2.19, gcc 4.7, and actual functionality approximately from 4.4 kernels, glibc 2.25, gcc 4.8, all the way up to current glibc/gcc/kernel versions. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2022-01-26 06:45:16 +00:00
host make clean
tests: Simplify explicit checks for command success A number of individual test cases use '*out' commands to check for success of specific commands they've issued. Now that the test harness is testing for success of all issued commands as a matter of course, we no longer need to do this. Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2022-05-12 06:43:33 +00:00
host CFLAGS="-Werror" make
test: Add distribution tests for several architectures and kernel versions The new tests check build and a simple case with pasta sending a short message in both directions (namespace to init, init to namespace). Tests cover a mix of Debian, Fedora, OpenSUSE and Ubuntu combinations on aarch64, i386, ppc64, ppc64le, s390x, x86_64. Builds tested starting from approximately glibc 2.19, gcc 4.7, and actual functionality approximately from 4.4 kernels, glibc 2.25, gcc 4.8, all the way up to current glibc/gcc/kernel versions. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2022-01-26 06:45:16 +00:00
distro_quick_pasta_test
hint
sleep 1
hostb reset
test: Expand root partition of Debian sid amd64 and aarch64 images A couple of days ago, we started running out of space there as we're about to install gcc -- about 50 MiB are missing. Given that virt-resize (which could be conveniently invoked by the Makefile for tests) reorders partitions if we expand the first one, resize the image using qemu-img from the test script itself, and then take care of expanding root partition and filesystem online later. This is probably a temporary hack, so I'm not looking for a more generic or elegant solution at the moment. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2022-07-29 21:27:55 +00:00
# HACK: We need some additional space to install gcc-12 on 'sid' images for
# amd64 and aarch64, but if we use virt-resize to call resize2fs in the
# preparation step, partitions will be rearranged and we would also need to
# adjust boot parameters. Instead, resize the images offline first, and expand
# partitions and filesystems online, later.
test: Add distribution tests for several architectures and kernel versions The new tests check build and a simple case with pasta sending a short message in both directions (namespace to init, init to namespace). Tests cover a mix of Debian, Fedora, OpenSUSE and Ubuntu combinations on aarch64, i386, ppc64, ppc64le, s390x, x86_64. Builds tested starting from approximately glibc 2.19, gcc 4.7, and actual functionality approximately from 4.4 kernels, glibc 2.25, gcc 4.8, all the way up to current glibc/gcc/kernel versions. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2022-01-26 06:45:16 +00:00
test Debian GNU/Linux sid (experimental), amd64
test: Expand root partition of Debian sid amd64 and aarch64 images A couple of days ago, we started running out of space there as we're about to install gcc -- about 50 MiB are missing. Given that virt-resize (which could be conveniently invoked by the Makefile for tests) reorders partitions if we expand the first one, resize the image using qemu-img from the test script itself, and then take care of expanding root partition and filesystem online later. This is probably a temporary hack, so I'm not looking for a more generic or elegant solution at the moment. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2022-07-29 21:27:55 +00:00
host qemu-img resize __BASEPATH__/prepared-debian-sid-nocloud-amd64-daily.qcow2 4G
test: Switch to qemu -netdev stream option instead of using qrap qemu commit 13c6be96618c ("net: stream: add unix socket") introduces support for native AF_UNIX support, finally making qrap useless. We can't quite drop that yet until a qemu release includes it, and then we'll need to wait a while for users to switch anyway, but at least for tests, we can use that support. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2022-11-04 01:16:21 +00:00
host qemu-system-x86_64 -M pc,accel=kvm:tcg -m 1024 -nographic -serial stdio -nodefaults -no-reboot -nographic -vga none __BASEPATH__/prepared-debian-sid-nocloud-amd64-daily.qcow2 -device virtio-net-pci,netdev=s0 -netdev stream,id=s0,server=off,addr.type=unix,addr.path=__STATEDIR__/passt.socket -snapshot
test: Add distribution tests for several architectures and kernel versions The new tests check build and a simple case with pasta sending a short message in both directions (namespace to init, init to namespace). Tests cover a mix of Debian, Fedora, OpenSUSE and Ubuntu combinations on aarch64, i386, ppc64, ppc64le, s390x, x86_64. Builds tested starting from approximately glibc 2.19, gcc 4.7, and actual functionality approximately from 4.4 kernels, glibc 2.25, gcc 4.8, all the way up to current glibc/gcc/kernel versions. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2022-01-26 06:45:16 +00:00
sleep 2
test: Expand root partition of Debian sid amd64 and aarch64 images A couple of days ago, we started running out of space there as we're about to install gcc -- about 50 MiB are missing. Given that virt-resize (which could be conveniently invoked by the Makefile for tests) reorders partitions if we expand the first one, resize the image using qemu-img from the test script itself, and then take care of expanding root partition and filesystem online later. This is probably a temporary hack, so I'm not looking for a more generic or elegant solution at the moment. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2022-07-29 21:27:55 +00:00
host growpart /dev/sda 1
host resize2fs -p /dev/sda1
test: debian: Export DEBIAN_FRONTEND=noninteractive for sid We start getting prompts about restarting outdated services: we're using daily images but they might have been cached for a while now. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2022-08-19 09:37:05 +00:00
host export DEBIAN_FRONTEND=noninteractive
test: Add distribution tests for several architectures and kernel versions The new tests check build and a simple case with pasta sending a short message in both directions (namespace to init, init to namespace). Tests cover a mix of Debian, Fedora, OpenSUSE and Ubuntu combinations on aarch64, i386, ppc64, ppc64le, s390x, x86_64. Builds tested starting from approximately glibc 2.19, gcc 4.7, and actual functionality approximately from 4.4 kernels, glibc 2.25, gcc 4.8, all the way up to current glibc/gcc/kernel versions. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2022-01-26 06:45:16 +00:00
host apt-get update
test: Convert distro tests to use socat instead of nc/ncat We've recently converted most of our tests to use socat instead of nc/netcat/ncat, because socat is more powerful and we don't need to deal with the several possible variants of netcat. We still use nc or ncat for the distro tests. Because there we control the guest environment and can pick our tools, there isn't the same reason to switch to socat. However, using socat here as well makes the tests a bit easier to read, and doesn't require people reading or modifying them to become familiar with an additional tool. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> [sbrivio: keep using netcat-openbsd in Ubuntu 16.04 ppc64 test, as socat is unavailable there] Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2022-08-18 06:13:49 +00:00
host apt-get -y install make gcc socat
test: Add distribution tests for several architectures and kernel versions The new tests check build and a simple case with pasta sending a short message in both directions (namespace to init, init to namespace). Tests cover a mix of Debian, Fedora, OpenSUSE and Ubuntu combinations on aarch64, i386, ppc64, ppc64le, s390x, x86_64. Builds tested starting from approximately glibc 2.19, gcc 4.7, and actual functionality approximately from 4.4 kernels, glibc 2.25, gcc 4.8, all the way up to current glibc/gcc/kernel versions. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2022-01-26 06:45:16 +00:00
host make clean
tests: Simplify explicit checks for command success A number of individual test cases use '*out' commands to check for success of specific commands they've issued. Now that the test harness is testing for success of all issued commands as a matter of course, we no longer need to do this. Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2022-05-12 06:43:33 +00:00
host CFLAGS="-Werror" make
test: Add distribution tests for several architectures and kernel versions The new tests check build and a simple case with pasta sending a short message in both directions (namespace to init, init to namespace). Tests cover a mix of Debian, Fedora, OpenSUSE and Ubuntu combinations on aarch64, i386, ppc64, ppc64le, s390x, x86_64. Builds tested starting from approximately glibc 2.19, gcc 4.7, and actual functionality approximately from 4.4 kernels, glibc 2.25, gcc 4.8, all the way up to current glibc/gcc/kernel versions. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2022-01-26 06:45:16 +00:00
distro_quick_pasta_test
hint
sleep 1
test Debian GNU/Linux sid (experimental), aarch64
test: Expand root partition of Debian sid amd64 and aarch64 images A couple of days ago, we started running out of space there as we're about to install gcc -- about 50 MiB are missing. Given that virt-resize (which could be conveniently invoked by the Makefile for tests) reorders partitions if we expand the first one, resize the image using qemu-img from the test script itself, and then take care of expanding root partition and filesystem online later. This is probably a temporary hack, so I'm not looking for a more generic or elegant solution at the moment. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2022-07-29 21:27:55 +00:00
host qemu-img resize __BASEPATH__/prepared-debian-sid-nocloud-arm64-daily.qcow2 4G
test: Switch to qemu -netdev stream option instead of using qrap qemu commit 13c6be96618c ("net: stream: add unix socket") introduces support for native AF_UNIX support, finally making qrap useless. We can't quite drop that yet until a qemu release includes it, and then we'll need to wait a while for users to switch anyway, but at least for tests, we can use that support. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2022-11-04 01:16:21 +00:00
host qemu-system-aarch64 -m 2048 -cpu cortex-a57 -smp 2 -M virt -bios __BASEPATH__/QEMU_EFI.fd -nographic -serial stdio -nodefaults -no-reboot -nographic -vga none __BASEPATH__/prepared-debian-sid-nocloud-arm64-daily.qcow2 -device virtio-net-pci,netdev=s0 -netdev stream,id=s0,server=off,addr.type=unix,addr.path=__STATEDIR__/passt.socket -snapshot
test: Add distribution tests for several architectures and kernel versions The new tests check build and a simple case with pasta sending a short message in both directions (namespace to init, init to namespace). Tests cover a mix of Debian, Fedora, OpenSUSE and Ubuntu combinations on aarch64, i386, ppc64, ppc64le, s390x, x86_64. Builds tested starting from approximately glibc 2.19, gcc 4.7, and actual functionality approximately from 4.4 kernels, glibc 2.25, gcc 4.8, all the way up to current glibc/gcc/kernel versions. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2022-01-26 06:45:16 +00:00
sleep 2
test: Expand root partition of Debian sid amd64 and aarch64 images A couple of days ago, we started running out of space there as we're about to install gcc -- about 50 MiB are missing. Given that virt-resize (which could be conveniently invoked by the Makefile for tests) reorders partitions if we expand the first one, resize the image using qemu-img from the test script itself, and then take care of expanding root partition and filesystem online later. This is probably a temporary hack, so I'm not looking for a more generic or elegant solution at the moment. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2022-07-29 21:27:55 +00:00
host growpart /dev/vda 1
host resize2fs -p /dev/vda1
test: debian: Export DEBIAN_FRONTEND=noninteractive for sid We start getting prompts about restarting outdated services: we're using daily images but they might have been cached for a while now. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2022-08-19 09:37:05 +00:00
host export DEBIAN_FRONTEND=noninteractive
test: Add distribution tests for several architectures and kernel versions The new tests check build and a simple case with pasta sending a short message in both directions (namespace to init, init to namespace). Tests cover a mix of Debian, Fedora, OpenSUSE and Ubuntu combinations on aarch64, i386, ppc64, ppc64le, s390x, x86_64. Builds tested starting from approximately glibc 2.19, gcc 4.7, and actual functionality approximately from 4.4 kernels, glibc 2.25, gcc 4.8, all the way up to current glibc/gcc/kernel versions. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2022-01-26 06:45:16 +00:00
host apt-get update
test: Convert distro tests to use socat instead of nc/ncat We've recently converted most of our tests to use socat instead of nc/netcat/ncat, because socat is more powerful and we don't need to deal with the several possible variants of netcat. We still use nc or ncat for the distro tests. Because there we control the guest environment and can pick our tools, there isn't the same reason to switch to socat. However, using socat here as well makes the tests a bit easier to read, and doesn't require people reading or modifying them to become familiar with an additional tool. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> [sbrivio: keep using netcat-openbsd in Ubuntu 16.04 ppc64 test, as socat is unavailable there] Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2022-08-18 06:13:49 +00:00
host apt-get -y install make gcc socat
test: Add distribution tests for several architectures and kernel versions The new tests check build and a simple case with pasta sending a short message in both directions (namespace to init, init to namespace). Tests cover a mix of Debian, Fedora, OpenSUSE and Ubuntu combinations on aarch64, i386, ppc64, ppc64le, s390x, x86_64. Builds tested starting from approximately glibc 2.19, gcc 4.7, and actual functionality approximately from 4.4 kernels, glibc 2.25, gcc 4.8, all the way up to current glibc/gcc/kernel versions. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2022-01-26 06:45:16 +00:00
host make clean
tests: Simplify explicit checks for command success A number of individual test cases use '*out' commands to check for success of specific commands they've issued. Now that the test harness is testing for success of all issued commands as a matter of course, we no longer need to do this. Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2022-05-12 06:43:33 +00:00
host CFLAGS="-Werror" make
test: Add distribution tests for several architectures and kernel versions The new tests check build and a simple case with pasta sending a short message in both directions (namespace to init, init to namespace). Tests cover a mix of Debian, Fedora, OpenSUSE and Ubuntu combinations on aarch64, i386, ppc64, ppc64le, s390x, x86_64. Builds tested starting from approximately glibc 2.19, gcc 4.7, and actual functionality approximately from 4.4 kernels, glibc 2.25, gcc 4.8, all the way up to current glibc/gcc/kernel versions. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2022-01-26 06:45:16 +00:00
distro_quick_pasta_test
hint
sleep 1
test Debian GNU/Linux sid (experimental), ppc64le
test: Switch to qemu -netdev stream option instead of using qrap qemu commit 13c6be96618c ("net: stream: add unix socket") introduces support for native AF_UNIX support, finally making qrap useless. We can't quite drop that yet until a qemu release includes it, and then we'll need to wait a while for users to switch anyway, but at least for tests, we can use that support. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2022-11-04 01:16:21 +00:00
host qemu-system-ppc64 -m 2048 -smp 2 -nographic -serial stdio -nodefaults -no-reboot -nographic -vga none __BASEPATH__/prepared-debian-sid-nocloud-ppc64el-daily.qcow2 -device virtio-net-pci,netdev=s0 -netdev stream,id=s0,server=off,addr.type=unix,addr.path=__STATEDIR__/passt.socket -snapshot
test: Add distribution tests for several architectures and kernel versions The new tests check build and a simple case with pasta sending a short message in both directions (namespace to init, init to namespace). Tests cover a mix of Debian, Fedora, OpenSUSE and Ubuntu combinations on aarch64, i386, ppc64, ppc64le, s390x, x86_64. Builds tested starting from approximately glibc 2.19, gcc 4.7, and actual functionality approximately from 4.4 kernels, glibc 2.25, gcc 4.8, all the way up to current glibc/gcc/kernel versions. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2022-01-26 06:45:16 +00:00
sleep 2
test: debian: Export DEBIAN_FRONTEND=noninteractive for sid We start getting prompts about restarting outdated services: we're using daily images but they might have been cached for a while now. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2022-08-19 09:37:05 +00:00
host export DEBIAN_FRONTEND=noninteractive
test: Add distribution tests for several architectures and kernel versions The new tests check build and a simple case with pasta sending a short message in both directions (namespace to init, init to namespace). Tests cover a mix of Debian, Fedora, OpenSUSE and Ubuntu combinations on aarch64, i386, ppc64, ppc64le, s390x, x86_64. Builds tested starting from approximately glibc 2.19, gcc 4.7, and actual functionality approximately from 4.4 kernels, glibc 2.25, gcc 4.8, all the way up to current glibc/gcc/kernel versions. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2022-01-26 06:45:16 +00:00
host apt-get update
test: Convert distro tests to use socat instead of nc/ncat We've recently converted most of our tests to use socat instead of nc/netcat/ncat, because socat is more powerful and we don't need to deal with the several possible variants of netcat. We still use nc or ncat for the distro tests. Because there we control the guest environment and can pick our tools, there isn't the same reason to switch to socat. However, using socat here as well makes the tests a bit easier to read, and doesn't require people reading or modifying them to become familiar with an additional tool. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> [sbrivio: keep using netcat-openbsd in Ubuntu 16.04 ppc64 test, as socat is unavailable there] Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2022-08-18 06:13:49 +00:00
host apt-get -y install make gcc socat
test: Add distribution tests for several architectures and kernel versions The new tests check build and a simple case with pasta sending a short message in both directions (namespace to init, init to namespace). Tests cover a mix of Debian, Fedora, OpenSUSE and Ubuntu combinations on aarch64, i386, ppc64, ppc64le, s390x, x86_64. Builds tested starting from approximately glibc 2.19, gcc 4.7, and actual functionality approximately from 4.4 kernels, glibc 2.25, gcc 4.8, all the way up to current glibc/gcc/kernel versions. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2022-01-26 06:45:16 +00:00
host make clean
tests: Simplify explicit checks for command success A number of individual test cases use '*out' commands to check for success of specific commands they've issued. Now that the test harness is testing for success of all issued commands as a matter of course, we no longer need to do this. Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2022-05-12 06:43:33 +00:00
host CFLAGS="-Werror" make
test: Add distribution tests for several architectures and kernel versions The new tests check build and a simple case with pasta sending a short message in both directions (namespace to init, init to namespace). Tests cover a mix of Debian, Fedora, OpenSUSE and Ubuntu combinations on aarch64, i386, ppc64, ppc64le, s390x, x86_64. Builds tested starting from approximately glibc 2.19, gcc 4.7, and actual functionality approximately from 4.4 kernels, glibc 2.25, gcc 4.8, all the way up to current glibc/gcc/kernel versions. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2022-01-26 06:45:16 +00:00
distro_quick_pasta_test
hint
sleep 1
hostb reset
sleep 1
host kill __PID__
Reference in New Issue Copy Permalink