2022-05-02 19:46:13 +00:00
From 657f20a4e57ec0deada4c6d02810e52c81c37cf1 Mon Sep 17 00:00:00 2001
2022-02-19 04:08:58 +00:00
From: Stefano Brivio <sbrivio@redhat.com>
2022-05-02 19:46:13 +00:00
Date: Mon, 2 May 2022 16:12:07 +0200
2022-02-19 04:08:58 +00:00
Subject: [PATCH] libpod: Add pasta networking mode
Conceptually equivalent to networking by means of slirp4netns(1),
with a few practical differences:
- pasta(1) forks to background once networking is configured in the
namespace and quits on its own once the namespace is deleted:
file descriptor synchronisation and PID tracking are not needed
- port forwarding is configured via command line options at start-up,
instead of an API socket: this is taken care of right away as we're
about to start pasta
- there's no need for further selection of port forwarding modes:
pasta behaves similarly to containers-rootlessport for local binds
(splice() instead of read()/write() pairs, without L2-L4
translation), and keeps the original source address for non-local
connections like slirp4netns does
2022-05-02 19:46:13 +00:00
- IPv6 is not an experimental feature, and enabled by default. IPv6
port forwarding is supported
2022-02-19 04:08:58 +00:00
- by default, addresses and routes are copied from the host, that is,
container users will see the same IP address and routes as if they
were in the init namespace context. The interface name is also
sourced from the host upstream interface with the first default
route in the routing table. This is also configurable as documented
- by default, the host is reachable using the gateway address from
the container, unless the --no-map-gw option is passed
- sandboxing and seccomp(2) policies cannot be disabled
See https://passt.top for more details about pasta.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
---
SPDX-FileCopyrightText: 2021-2022 Red Hat GmbH <sbrivio@redhat.com>
SPDX-License-Identifier: Apache-2.0
2022-05-02 19:46:13 +00:00
docs/source/markdown/podman-create.1.md | 48 ++++++++-
docs/source/markdown/podman-pod-create.1.md | 44 ++++++++
docs/source/markdown/podman-run.1.md | 49 ++++++++-
docs/source/markdown/podman.1.md | 6 +-
libpod/networking_linux.go | 6 +-
libpod/networking_pasta.go | 107 ++++++++++++++++++++
pkg/namespaces/namespaces.go | 6 ++
pkg/specgen/generate/namespaces.go | 10 ++
pkg/specgen/generate/pod_create.go | 6 ++
pkg/specgen/namespaces.go | 18 +++-
pkg/specgen/podspecgen.go | 2 +-
11 files changed, 288 insertions(+), 14 deletions(-)
2022-02-19 04:08:58 +00:00
create mode 100644 libpod/networking_pasta.go
diff --git a/docs/source/markdown/podman-create.1.md b/docs/source/markdown/podman-create.1.md
2022-05-02 19:46:13 +00:00
index c63e8814b..9ffb5fff0 100644
2022-02-19 04:08:58 +00:00
--- a/docs/source/markdown/podman-create.1.md
+++ b/docs/source/markdown/podman-create.1.md
2022-05-02 19:46:13 +00:00
@@ -712,10 +712,15 @@ Valid _mode_ values are:
2022-02-19 04:08:58 +00:00
- **interface_name**: Specify a name for the created network interface inside the container.
For example to set a static ipv4 address and a static mac address, use `--network bridge:ip=10.88.0.10,mac=44:33:22:11:00:99`.
+
- \<network name or ID\>[:OPTIONS,...]: Connect to a user-defined network; this is the network name or ID from a network created by **[podman network create](podman-network-create.1.md)**. Using the network name implies the bridge network mode. It is possible to specify the same options described under the bridge mode above. You can use the **--network** option multiple times to specify additional networks.
+
- **none**: Create a network namespace for the container but do not configure network interfaces for it, thus the container has no network connectivity.
+
- **container:**_id_: Reuse another container's network stack.
+
- **host**: Do not create a network namespace, the container will use the host's network. Note: The host mode gives the container full access to local system services such as D-bus and is therefore considered insecure.
+
- **ns:**_path_: Path to a network namespace to join.
2022-05-02 19:46:13 +00:00
- **private**: Create a new namespace for the container. This will use the **bridge** mode for rootful containers and **slirp4netns** for rootless ones.
- **slirp4netns[:OPTIONS,...]**: use **slirp4netns**(1) to create a user network stack. This is the default for rootless containers. It is possible to specify these additional options, they can also be set with `network_cmd_options` in containers.conf:
@@ -731,6 +736,40 @@ Valid _mode_ values are:
2022-02-19 04:08:58 +00:00
Note: Rootlesskit changes the source IP address of incoming packets to an IP address in the container network namespace, usually `10.0.2.100`. If your application requires the real source IP address, e.g. web server logs, use the slirp4netns port handler. The rootlesskit port handler is also used for rootless containers when connected to user-defined networks.
- **port_handler=slirp4netns**: Use the slirp4netns port forwarding, it is slower than rootlesskit but preserves the correct source IP address. This port handler cannot be used for user-defined networks.
+- **pasta[:OPTIONS,...]**: use **pasta**(1) to create a user-mode networking
+stack. By default, IPv4 and IPv6 addresses and routes, as well as the pod
2022-05-02 19:46:13 +00:00
+interface name, are copied from the host. Port forwarding preserves the original
+source IP address. Options described in pasta(1) can be specified as
+comma-separated arguments.
+
+In terms of pasta(1) options, **--config-net** is given by default, in order to
+configure networking when the container is started. Also, **-t none** and
+**-u none** are passed if, respectively, no TCP or UDP port forwarding from host
+to container is configured, to disable automatic port forwarding based on bound
+ports. Similarly, **-T none** and **-U none** are also given to disable the same
+functionality from container to host.
+
+Some examples:
2022-02-19 04:08:58 +00:00
+ - **pasta:--no-map-gw**: Don't allow the container to directly reach the host
+ using the gateway address, which would normally be mapped to a loopback or
+ link-local address.
+ - **pasta:--mtu,1500**: Specify a 1500 bytes MTU for the _tap_ interface in
+ the container.
+ - **pasta:--ipv4-only,-a,10.0.2.0,-n,24,-g,10.0.2.2,--dns-forward,10.0.2.3,-m,1500,--no-ndp,--no-dhcpv6,--no-dhcp**,
+ equivalent to default slirp4netns(1) options: disable IPv6, assign
+ `10.0.2.0/24` to the `tap0` interface in the container, with gateway
+ `10.0.2.3`, enable DNS forwarder reachable at `10.0.2.3`, set MTU to 1500
+ bytes, disable NDP, DHCPv6 and DHCP support.
+ - **pasta:--no-map-gw,-I,tap0,--ipv4-only,-a,10.0.2.0,-n,24,-g,10.0.2.2,--dns-forward,10.0.2.3,--no-ndp,--no-dhcpv6,--no-dhcp**,
+ equivalent to default slirp4netns(1) options with Podman overrides: same as
+ above, but leave the MTU to 65520 bytes, and don't map the gateway address
+ from the container to a local address.
2022-05-02 19:46:13 +00:00
+ - **pasta:-t,auto,-u,auto,-T,auto,-U,auto**: enable automatic port forwarding
+ based on observed bound ports from both host and container sides
+ - **pasta:-T,5201**: enable forwarding of TCP port 5201 from container to
+ host, using the loopback interface instead of the tap interface for improved
+ performance
2022-02-19 04:08:58 +00:00
+
#### **--network-alias**=*alias*
Add a network-scoped alias for the container, setting the alias for all networks that the container joins. To set a name only for a specific network, use the alias option as described under the **--network** option.
2022-05-02 19:46:13 +00:00
@@ -1583,8 +1622,9 @@ In order for users to run rootless, there must be an entry for their username in
2022-02-19 04:08:58 +00:00
Rootless Podman works better if the fuse-overlayfs and slirp4netns packages are installed.
The fuse-overlayfs package provides a userspace overlay storage driver, otherwise users need to use
-the vfs storage driver, which is diskspace expensive and does not perform well. slirp4netns is
-required for VPN, without it containers need to be run with the --network=host flag.
+the vfs storage driver, which is diskspace expensive and does not perform well.
+slirp4netns or pasta are required for VPN, without it containers need to be run
+with the --network=host flag.
## ENVIRONMENT
2022-05-02 19:46:13 +00:00
@@ -1633,7 +1673,9 @@ page.
2022-02-19 04:08:58 +00:00
NOTE: Use the environment variable `TMPDIR` to change the temporary storage location of downloaded container images. Podman defaults to use `/var/tmp`.
## SEE ALSO
-**[podman(1)](podman.1.md)**, **[podman-save(1)](podman-save.1.md)**, **[podman-ps(1)](podman-ps.1.md)**, **[podman-attach(1)](podman-attach.1.md)**, **[podman-pod-create(1)](podman-pod-create.1.md)**, **[podman-port(1)](podman-port.1.md)**, **[podman-start(1)](podman-start.1.md)**, **[podman-kill(1)](podman-kill.1.md)**, **[podman-stop(1)](podman-stop.1.md)**, **[podman-generate-systemd(1)](podman-generate-systemd.1.md)**, **[podman-rm(1)](podman-rm.1.md)**, **[subgid(5)](https://www.unix.com/man-page/linux/5/subgid)**, **[subuid(5)](https://www.unix.com/man-page/linux/5/subuid)**, **[containers.conf(5)](https://github.com/containers/common/blob/main/docs/containers.conf.5.md)**, **[systemd.unit(5)](https://www.freedesktop.org/software/systemd/man/systemd.unit.html)**, **[setsebool(8)](https://man7.org/linux/man-pages/man8/setsebool.8.html)**, **[slirp4netns(1)](https://github.com/rootless-containers/slirp4netns/blob/master/slirp4netns.1.md)**, **[fuse-overlayfs(1)](https://github.com/containers/fuse-overlayfs/blob/main/fuse-overlayfs.1.md)**, **proc(5)**, **[conmon(8)](https://github.com/containers/conmon/blob/main/docs/conmon.8.md)**, **personality(2)**
+**[podman(1)](podman.1.md)**, **[podman-save(1)](podman-save.1.md)**, **[podman-ps(1)](podman-ps.1.md)**, **[podman-attach(1)](podman-attach.1.md)**, **[podman-pod-create(1)](podman-pod-create.1.md)**, **[podman-port(1)](podman-port.1.md)**, **[podman-start(1)](podman-start.1.md)**, **[podman-kill(1)](podman-kill.1.md)**, **[podman-stop(1)](podman-stop.1.md)**, **[podman-generate-systemd(1)](podman-generate-systemd.1.md)**, **[podman-rm(1)](podman-rm.1.md)**, **[subgid(5)](https://www.unix.com/man-page/linux/5/subgid)**, **[subuid(5)](https://www.unix.com/man-page/linux/5/subuid)**, **[containers.conf(5)](https://github.com/containers/common/blob/main/docs/containers.conf.5.md)**, **[systemd.unit(5)](https://www.freedesktop.org/software/systemd/man/systemd.unit.html)**, **[setsebool(8)](https://man7.org/linux/man-pages/man8/setsebool.8.html)**, **[slirp4netns(1)](https://github.com/rootless-containers/slirp4netns/blob/master/slirp4netns.1.md)**,
+**[pasta(1)](https://passt.top/builds/latest/web/passt.1.html)**,
+**[fuse-overlayfs(1)](https://github.com/containers/fuse-overlayfs/blob/main/fuse-overlayfs.1.md)**, **proc(5)**, **[conmon(8)](https://github.com/containers/conmon/blob/main/docs/conmon.8.md)**, **personality(2)**
## HISTORY
October 2017, converted from Docker documentation to Podman by Dan Walsh for Podman `<dwalsh@redhat.com>`
diff --git a/docs/source/markdown/podman-pod-create.1.md b/docs/source/markdown/podman-pod-create.1.md
2022-05-02 19:46:13 +00:00
index 714909b98..2b82d9380 100644
2022-02-19 04:08:58 +00:00
--- a/docs/source/markdown/podman-pod-create.1.md
+++ b/docs/source/markdown/podman-pod-create.1.md
2022-05-02 19:46:13 +00:00
@@ -164,10 +164,15 @@ Valid _mode_ values are:
2022-02-19 04:08:58 +00:00
- **interface_name**: Specify a name for the created network interface inside the container.
For example to set a static ipv4 address and a static mac address, use `--network bridge:ip=10.88.0.10,mac=44:33:22:11:00:99`.
+
- \<network name or ID\>[:OPTIONS,...]: Connect to a user-defined network; this is the network name or ID from a network created by **[podman network create](podman-network-create.1.md)**. Using the network name implies the bridge network mode. It is possible to specify the same options described under the bridge mode above. You can use the **--network** option multiple times to specify additional networks.
+
- **none**: Create a network namespace for the container but do not configure network interfaces for it, thus the container has no network connectivity.
+
- **container:**_id_: Reuse another container's network stack.
+
- **host**: Do not create a network namespace, the container will use the host's network. Note: The host mode gives the container full access to local system services such as D-bus and is therefore considered insecure.
+
- **ns:**_path_: Path to a network namespace to join.
2022-05-02 19:46:13 +00:00
- **private**: Create a new namespace for the container. This will use the **bridge** mode for rootful containers and **slirp4netns** for rootless ones.
- **slirp4netns[:OPTIONS,...]**: use **slirp4netns**(1) to create a user network stack. This is the default for rootless containers. It is possible to specify these additional options, they can also be set with `network_cmd_options` in containers.conf:
@@ -183,6 +188,43 @@ Valid _mode_ values are:
2022-02-19 04:08:58 +00:00
Note: Rootlesskit changes the source IP address of incoming packets to an IP address in the container network namespace, usually `10.0.2.100`. If your application requires the real source IP address, e.g. web server logs, use the slirp4netns port handler. The rootlesskit port handler is also used for rootless containers when connected to user-defined networks.
- **port_handler=slirp4netns**: Use the slirp4netns port forwarding, it is slower than rootlesskit but preserves the correct source IP address. This port handler cannot be used for user-defined networks.
+- **pasta[:OPTIONS,...]**: use **pasta**(1) to create a user-mode networking
+stack. By default, IPv4 and IPv6 addresses and routes, as well as the pod
+interface name, are copied from the host. If port forwarding isn't configured,
+ports will be forwarded dynamically as services are bound on either side (init
+namespace or container namespace). Port forwarding preserves the original source
+IP address. Options described in pasta(1) can be specified as comma-separated
2022-05-02 19:46:13 +00:00
+arguments.
+
+
+In terms of pasta(1) options, **--config-net** is given by default, in order to
+configure networking when the container is started. Also, **-t none** and
+**-u none** are passed if, respectively, no TCP or UDP port forwarding from host
+to container is configured, to disable automatic port forwarding based on bound
+ports. Similarly, **-T none** and **-U none** are also given to disable the same
+functionality from container to host.
+
+Some examples:
2022-02-19 04:08:58 +00:00
+ - **pasta:--no-map-gw**: Don't allow the container to directly reach the host
+ using the gateway address, which would normally be mapped to a loopback or
+ link-local address.
+ - **pasta:--mtu,1500**: Specify a 1500 bytes MTU for the _tap_ interface in
+ the container.
+ - **pasta:--ipv4-only,-a,10.0.2.0,-n,24,-g,10.0.2.2,--dns-forward,10.0.2.3,-m,1500,--no-ndp,--no-dhcpv6,--no-dhcp**,
+ equivalent to default slirp4netns(1) options: disable IPv6, assign
+ `10.0.2.0/24` to the `tap0` interface in the container, with gateway
+ `10.0.2.3`, enable DNS forwarder reachable at `10.0.2.3`, set MTU to 1500
+ bytes, disable NDP, DHCPv6 and DHCP support.
+ - **pasta:--no-map-gw,-I,tap0,--ipv4-only,-a,10.0.2.0,-n,24,-g,10.0.2.2,--dns-forward,10.0.2.3,--no-ndp,--no-dhcpv6,--no-dhcp**,
+ equivalent to default slirp4netns(1) options with Podman overrides: same as
+ above, but leave the MTU to 65520 bytes, and don't map the gateway address
+ from the container to a local address.
2022-05-02 19:46:13 +00:00
+ - **pasta:-t,auto,-u,auto,-T,auto,-U,auto**: enable automatic port forwarding
+ based on observed bound ports from both host and container sides
+ - **pasta:-T,5201**: enable forwarding of TCP port 5201 from container to
+ host, using the loopback interface instead of the tap interface for improved
+ performance
2022-02-19 04:08:58 +00:00
+
#### **--network-alias**=*alias*
Add a network-scoped alias for the pod, setting the alias for all networks that the pod joins. To set a name only for a specific network, use the alias option as described under the **--network** option.
2022-05-02 19:46:13 +00:00
@@ -550,6 +592,8 @@ $ podman pod create --network slirp4netns:outbound_addr=127.0.0.1,allow_host_loo
2022-02-19 04:08:58 +00:00
$ podman pod create --network slirp4netns:cidr=192.168.0.0/24
+$ podman pod create --network pasta
+
$ podman pod create --network net1:ip=10.89.1.5 --network net2:ip=10.89.10.10
```
diff --git a/docs/source/markdown/podman-run.1.md b/docs/source/markdown/podman-run.1.md
2022-05-02 19:46:13 +00:00
index 9d9394020..1143284bf 100644
2022-02-19 04:08:58 +00:00
--- a/docs/source/markdown/podman-run.1.md
+++ b/docs/source/markdown/podman-run.1.md
2022-05-02 19:46:13 +00:00
@@ -738,10 +738,15 @@ Valid _mode_ values are:
2022-02-19 04:08:58 +00:00
- **interface_name**: Specify a name for the created network interface inside the container.
For example to set a static ipv4 address and a static mac address, use `--network bridge:ip=10.88.0.10,mac=44:33:22:11:00:99`.
+
- \<network name or ID\>[:OPTIONS,...]: Connect to a user-defined network; this is the network name or ID from a network created by **[podman network create](podman-network-create.1.md)**. Using the network name implies the bridge network mode. It is possible to specify the same options described under the bridge mode above. You can use the **--network** option multiple times to specify additional networks.
+
- **none**: Create a network namespace for the container but do not configure network interfaces for it, thus the container has no network connectivity.
+
- **container:**_id_: Reuse another container's network stack.
+
- **host**: Do not create a network namespace, the container will use the host's network. Note: The host mode gives the container full access to local system services such as D-bus and is therefore considered insecure.
+
- **ns:**_path_: Path to a network namespace to join.
2022-05-02 19:46:13 +00:00
- **private**: Create a new namespace for the container. This will use the **bridge** mode for rootful containers and **slirp4netns** for rootless ones.
- **slirp4netns[:OPTIONS,...]**: use **slirp4netns**(1) to create a user network stack. This is the default for rootless containers. It is possible to specify these additional options, they can also be set with `network_cmd_options` in containers.conf:
@@ -757,6 +762,43 @@ Valid _mode_ values are:
2022-02-19 04:08:58 +00:00
Note: Rootlesskit changes the source IP address of incoming packets to an IP address in the container network namespace, usually `10.0.2.100`. If your application requires the real source IP address, e.g. web server logs, use the slirp4netns port handler. The rootlesskit port handler is also used for rootless containers when connected to user-defined networks.
- **port_handler=slirp4netns**: Use the slirp4netns port forwarding, it is slower than rootlesskit but preserves the correct source IP address. This port handler cannot be used for user-defined networks.
+- **pasta[:OPTIONS,...]**: use **pasta**(1) to create a user-mode networking
+stack. By default, IPv4 and IPv6 addresses and routes, as well as the pod
+interface name, are copied from the host. If port forwarding isn't configured,
+ports will be forwarded dynamically as services are bound on either side (init
+namespace or container namespace). Port forwarding preserves the original source
+IP address. Options described in pasta(1) can be specified as comma-separated
2022-05-02 19:46:13 +00:00
+arguments.
+
+
+In terms of pasta(1) options, **--config-net** is given by default, in order to
+configure networking when the container is started. Also, **-t none** and
+**-u none** are passed if, respectively, no TCP or UDP port forwarding from host
+to container is configured, to disable automatic port forwarding based on bound
+ports. Similarly, **-T none** and **-U none** are also given to disable the same
+functionality from container to host.
+
+Some examples:
2022-02-19 04:08:58 +00:00
+ - **pasta:--no-map-gw**: Don't allow the container to directly reach the host
+ using the gateway address, which would normally be mapped to a loopback or
+ link-local address.
+ - **pasta:--mtu,1500**: Specify a 1500 bytes MTU for the _tap_ interface in
+ the container.
+ - **pasta:--ipv4-only,-a,10.0.2.0,-n,24,-g,10.0.2.2,--dns-forward,10.0.2.3,-m,1500,--no-ndp,--no-dhcpv6,--no-dhcp**,
+ equivalent to default slirp4netns(1) options: disable IPv6, assign
+ `10.0.2.0/24` to the `tap0` interface in the container, with gateway
+ `10.0.2.3`, enable DNS forwarder reachable at `10.0.2.3`, set MTU to 1500
+ bytes, disable NDP, DHCPv6 and DHCP support.
+ - **pasta:--no-map-gw,-I,tap0,--ipv4-only,-a,10.0.2.0,-n,24,-g,10.0.2.2,--dns-forward,10.0.2.3,--no-ndp,--no-dhcpv6,--no-dhcp**,
+ equivalent to default slirp4netns(1) options with Podman overrides: same as
+ above, but leave the MTU to 65520 bytes, and don't map the gateway address
+ from the container to a local address.
2022-05-02 19:46:13 +00:00
+ - **pasta:-t,auto,-u,auto,-T,auto,-U,auto**: enable automatic port forwarding
+ based on observed bound ports from both host and container sides
+ - **pasta:-T,5201**: enable forwarding of TCP port 5201 from container to
+ host, using the loopback interface instead of the tap interface for improved
+ performance
2022-02-19 04:08:58 +00:00
+
#### **--network-alias**=*alias*
Add a network-scoped alias for the container, setting the alias for all networks that the container joins. To set a name only for a specific network, use the alias option as described under the **--network** option.
2022-05-02 19:46:13 +00:00
@@ -1963,8 +2005,9 @@ In order for users to run rootless, there must be an entry for their username in
2022-02-19 04:08:58 +00:00
Rootless Podman works better if the fuse-overlayfs and slirp4netns packages are installed.
The **fuse-overlayfs** package provides a userspace overlay storage driver, otherwise users need to use
-the **vfs** storage driver, which is diskspace expensive and does not perform well. slirp4netns is
-required for VPN, without it containers need to be run with the **--network=host** flag.
+the **vfs** storage driver, which is diskspace expensive and does not perform
+well. slirp4netns or pasta are required for VPN, without it containers need to
+be run with the **--network=host** flag.
## ENVIRONMENT
2022-05-02 19:46:13 +00:00
@@ -2011,7 +2054,7 @@ page.
2022-02-19 04:08:58 +00:00
NOTE: Use the environment variable `TMPDIR` to change the temporary storage location of downloaded container images. Podman defaults to use `/var/tmp`.
## SEE ALSO
-**[podman(1)](podman.1.md)**, **[podman-save(1)](podman-save.1.md)**, **[podman-ps(1)](podman-ps.1.md)**, **[podman-attach(1)](podman-attach.1.md)**, **[podman-pod-create(1)](podman-pod-create.1.md)**, **[podman-port(1)](podman-port.1.md)**, **[podman-start(1)](podman-start.1.md)**, **[podman-kill(1)](podman-kill.1.md)**, **[podman-stop(1)](podman-stop.1.md)**, **[podman-generate-systemd(1)](podman-generate-systemd.1.md)**, **[podman-rm(1)](podman-rm.1.md)**, **[subgid(5)](https://www.unix.com/man-page/linux/5/subgid)**, **[subuid(5)](https://www.unix.com/man-page/linux/5/subuid)**, **[containers.conf(5)](https://github.com/containers/common/blob/main/docs/containers.conf.5.md)**, **[systemd.unit(5)](https://www.freedesktop.org/software/systemd/man/systemd.unit.html)**, **[setsebool(8)](https://man7.org/linux/man-pages/man8/setsebool.8.html)**, **[slirp4netns(1)](https://github.com/rootless-containers/slirp4netns/blob/master/slirp4netns.1.md)**, **[fuse-overlayfs(1)](https://github.com/containers/fuse-overlayfs/blob/main/fuse-overlayfs.1.md)**, **proc(5)**, **[conmon(8)](https://github.com/containers/conmon/blob/main/docs/conmon.8.md)**, **personality(2)**
+**[podman(1)](podman.1.md)**, **[podman-save(1)](podman-save.1.md)**, **[podman-ps(1)](podman-ps.1.md)**, **[podman-attach(1)](podman-attach.1.md)**, **[podman-pod-create(1)](podman-pod-create.1.md)**, **[podman-port(1)](podman-port.1.md)**, **[podman-start(1)](podman-start.1.md)**, **[podman-kill(1)](podman-kill.1.md)**, **[podman-stop(1)](podman-stop.1.md)**, **[podman-generate-systemd(1)](podman-generate-systemd.1.md)**, **[podman-rm(1)](podman-rm.1.md)**, **[subgid(5)](https://www.unix.com/man-page/linux/5/subgid)**, **[subuid(5)](https://www.unix.com/man-page/linux/5/subuid)**, **[containers.conf(5)](https://github.com/containers/common/blob/main/docs/containers.conf.5.md)**, **[systemd.unit(5)](https://www.freedesktop.org/software/systemd/man/systemd.unit.html)**, **[setsebool(8)](https://man7.org/linux/man-pages/man8/setsebool.8.html)**, **[slirp4netns(1)](https://github.com/rootless-containers/slirp4netns/blob/master/slirp4netns.1.md)**, **[pasta(1)](https://passt.top/builds/latest/web/passt.1.html)**, **[fuse-overlayfs(1)](https://github.com/containers/fuse-overlayfs/blob/main/fuse-overlayfs.1.md)**, **proc(5)**, **[conmon(8)](https://github.com/containers/conmon/blob/main/docs/conmon.8.md)**, **personality(2)**
## HISTORY
September 2018, updated by Kunal Kushwaha `<kushwaha_kunal_v7@lab.ntt.co.jp>`
diff --git a/docs/source/markdown/podman.1.md b/docs/source/markdown/podman.1.md
2022-05-02 19:46:13 +00:00
index 3d1578ea1..0768fd082 100644
2022-02-19 04:08:58 +00:00
--- a/docs/source/markdown/podman.1.md
+++ b/docs/source/markdown/podman.1.md
2022-05-02 19:46:13 +00:00
@@ -88,7 +88,7 @@ Set libpod namespace. Namespaces are used to separate groups of containers and p
2022-02-19 04:08:58 +00:00
When namespace is set, created containers and pods will join the given namespace, and only containers and pods in the given namespace will be visible to Podman.
#### **--network-cmd-path**=*path*
-Path to the command binary to use for setting up a network. It is currently only used for setting up a slirp4netns network. If "" is used then the binary is looked up using the $PATH environment variable.
+Path to the command binary to use for setting up a network. It is currently only used for setting up a slirp4netns(1) or pasta(1) network. If "" is used then the binary is looked up using the $PATH environment variable.
2022-05-02 19:46:13 +00:00
#### **--network-config-dir**=*directory*
2022-02-19 04:08:58 +00:00
2022-05-02 19:46:13 +00:00
@@ -415,7 +415,7 @@ See the `subuid(5)` and `subgid(5)` man pages for more information.
2022-02-19 04:08:58 +00:00
Images are pulled under `XDG_DATA_HOME` when specified, otherwise in the home directory of the user under `.local/share/containers/storage`.
-Currently the slirp4netns package is required to be installed to create a network device, otherwise rootless containers need to run in the network namespace of the host.
+Currently either slirp4netns or pasta are required to be installed to create a network device, otherwise rootless containers need to run in the network namespace of the host.
In certain environments like HPC (High Performance Computing), users cannot take advantage of the additional UIDs and GIDs from the /etc/subuid and /etc/subgid systems. However, in this environment, rootless Podman can operate with a single UID. To make this work, set the `ignore_chown_errors` option in the /etc/containers/storage.conf or in ~/.config/containers/storage.conf files. This option tells Podman when pulling an image to ignore chown errors when attempting to change a file in a container image to match the non-root UID in the image. This means all files get saved as the user's UID. Note this could cause issues when running the container.
2022-05-02 19:46:13 +00:00
@@ -428,7 +428,7 @@ The Network File System (NFS) and other distributed file systems (for example: L
2022-02-19 04:08:58 +00:00
For more information, please refer to the [Podman Troubleshooting Page](https://github.com/containers/podman/blob/main/troubleshooting.md).
## SEE ALSO
-**[containers-mounts.conf(5)](https://github.com/containers/common/blob/main/docs/containers-mounts.conf.5.md)**, **[containers.conf(5)](https://github.com/containers/common/blob/main/docs/containers.conf.5.md)**, **[containers-registries.conf(5)](https://github.com/containers/image/blob/main/docs/containers-registries.conf.5.md)**, **[containers-storage.conf(5)](https://github.com/containers/storage/blob/main/docs/containers-storage.conf.5.md)**, **[buildah(1)](https://github.com/containers/buildah/blob/main/docs/buildah.1.md)**, **oci-hooks(5)**, **[containers-policy.json(5)](https://github.com/containers/image/blob/main/docs/containers-policy.json.5.md)**, **[crun(1)](https://github.com/containers/crun/blob/main/crun.1.md)**, **[runc(8)](https://github.com/opencontainers/runc/blob/master/man/runc.8.md)**, **[subuid(5)](https://www.unix.com/man-page/linux/5/subuid)**, **[subgid(5)](https://www.unix.com/man-page/linux/5/subgid)**, **[slirp4netns(1)](https://github.com/rootless-containers/slirp4netns/blob/master/slirp4netns.1.md)**, **[conmon(8)](https://github.com/containers/conmon/blob/main/docs/conmon.8.md)**
+**[containers-mounts.conf(5)](https://github.com/containers/common/blob/main/docs/containers-mounts.conf.5.md)**, **[containers.conf(5)](https://github.com/containers/common/blob/main/docs/containers.conf.5.md)**, **[containers-registries.conf(5)](https://github.com/containers/image/blob/main/docs/containers-registries.conf.5.md)**, **[containers-storage.conf(5)](https://github.com/containers/storage/blob/main/docs/containers-storage.conf.5.md)**, **[buildah(1)](https://github.com/containers/buildah/blob/main/docs/buildah.1.md)**, **oci-hooks(5)**, **[containers-policy.json(5)](https://github.com/containers/image/blob/main/docs/containers-policy.json.5.md)**, **[crun(1)](https://github.com/containers/crun/blob/main/crun.1.md)**, **[runc(8)](https://github.com/opencontainers/runc/blob/master/man/runc.8.md)**, **[subuid(5)](https://www.unix.com/man-page/linux/5/subuid)**, **[subgid(5)](https://www.unix.com/man-page/linux/5/subgid)**, **[slirp4netns(1)](https://github.com/rootless-containers/slirp4netns/blob/master/slirp4netns.1.md)**, **[pasta(1)](https://passt.top/builds/latest/web/passt.1.html)**, **[conmon(8)](https://github.com/containers/conmon/blob/main/docs/conmon.8.md)**
## HISTORY
Dec 2016, Originally compiled by Dan Walsh <dwalsh@redhat.com>
diff --git a/libpod/networking_linux.go b/libpod/networking_linux.go
2022-05-02 19:46:13 +00:00
index 0c124cf0b..4d25e26f2 100644
2022-02-19 04:08:58 +00:00
--- a/libpod/networking_linux.go
+++ b/libpod/networking_linux.go
2022-05-02 19:46:13 +00:00
@@ -644,6 +644,9 @@ func (r *Runtime) configureNetNS(ctr *Container, ctrNS ns.NetNS) (status map[str
2022-02-19 04:08:58 +00:00
if ctr.config.NetMode.IsSlirp4netns() {
return nil, r.setupSlirp4netns(ctr, ctrNS)
}
+ if ctr.config.NetMode.IsPasta() {
+ return nil, r.setupPasta(ctr, ctrNS)
+ }
networks, err := ctr.networks()
if err != nil {
return nil, err
2022-05-02 19:46:13 +00:00
@@ -811,7 +814,8 @@ func (r *Runtime) teardownCNI(ctr *Container) error {
2022-02-19 04:08:58 +00:00
return err
}
- if !ctr.config.NetMode.IsSlirp4netns() && len(networks) > 0 {
+ if !ctr.config.NetMode.IsSlirp4netns() &&
+ !ctr.config.NetMode.IsPasta() && len(networks) > 0 {
2022-05-02 19:46:13 +00:00
netOpts := ctr.getNetworkOptions(networks)
return r.teardownNetwork(ctr.state.NetNS.Path(), netOpts)
}
2022-02-19 04:08:58 +00:00
diff --git a/libpod/networking_pasta.go b/libpod/networking_pasta.go
new file mode 100644
2022-05-02 19:46:13 +00:00
index 000000000..66f81cbfc
2022-02-19 04:08:58 +00:00
--- /dev/null
+++ b/libpod/networking_pasta.go
2022-05-02 19:46:13 +00:00
@@ -0,0 +1,107 @@
2022-02-19 04:08:58 +00:00
+// SPDX-License-Identifier: Apache-2.0
+//
+// networking_pasta.go - Start pasta(1) to provide connectivity to the container
+//
+// Copyright (c) 2022 Red Hat GmbH
+// Author: Stefano Brivio <sbrivio@redhat.com>
+//
+// +build linux
+
+package libpod
+
+import (
+ "os/exec"
+ "fmt"
+ "strings"
+
+ "github.com/containernetworking/plugins/pkg/ns"
+ "github.com/pkg/errors"
+ "github.com/sirupsen/logrus"
+)
+
+func (r *Runtime) setupPasta(ctr *Container, netns ns.NetNS) error {
2022-05-02 19:46:13 +00:00
+ var NoTCPInitPorts = true
+ var NoUDPInitPorts = true
+ var NoTCPNamespacePorts = true
+ var NoUDPNamespacePorts = true
+
2022-02-19 04:08:58 +00:00
+ path := r.config.Engine.NetworkCmdPath
+ if path == "" {
+ var err error
+ path, err = exec.LookPath("pasta")
+ if err != nil {
2022-05-02 19:46:13 +00:00
+ return fmt.Errorf("could not find pasta, the network namespace can't be configured: %w", err)
2022-02-19 04:08:58 +00:00
+ }
+ }
+
+ cmdArgs := []string{}
+ cmdArgs = append(cmdArgs, "--config-net")
+
+ for _, i := range ctr.convertPortMappings() {
2022-05-02 19:46:13 +00:00
+ protocols := strings.Split(i.Protocol, ",")
+ for _, protocol := range protocols {
+ var addr string
+
+ if (i.HostIP != "") {
+ addr = fmt.Sprintf("%s/", i.HostIP)
+ } else {
+ addr = ""
+ }
+
+ if protocol == "tcp" {
+ cmdArgs = append(cmdArgs, "-t")
+ } else if protocol == "udp" {
+ cmdArgs = append(cmdArgs, "-u")
+ } else {
+ return fmt.Errorf("can't forward protocol: %s", protocol)
+ }
+
+ arg := fmt.Sprintf("%s%d-%d:%d-%d", addr,
+ i.HostPort,
+ i.HostPort + i.Range - 1,
+ i.ContainerPort,
+ i.ContainerPort + i.Range - 1)
+ cmdArgs = append(cmdArgs, arg)
2022-02-19 04:08:58 +00:00
+ }
+ }
+
+ cmdArgs = append(cmdArgs, ctr.config.NetworkOptions["pasta"]...)
+
2022-05-02 19:46:13 +00:00
+ for _, i := range cmdArgs {
+ if (i == "-t" || i == "--tcp-ports") {
+ NoTCPInitPorts = false
+ } else if (i == "-u" || i == "--udp-ports") {
+ NoUDPInitPorts = false
+ } else if (i == "-T" || i == "--tcp-ns") {
+ NoTCPNamespacePorts = false
+ } else if (i == "-U" || i == "--udp-ns") {
+ NoUDPNamespacePorts = false
+ }
+ }
+
+ if (NoTCPInitPorts) {
+ cmdArgs = append(cmdArgs, "-t", "none")
+ }
+ if (NoUDPInitPorts) {
+ cmdArgs = append(cmdArgs, "-u", "none")
+ }
+ if (NoTCPNamespacePorts) {
+ cmdArgs = append(cmdArgs, "-T", "none")
+ }
+ if (NoUDPNamespacePorts) {
+ cmdArgs = append(cmdArgs, "-U", "none")
+ }
+
2022-02-19 04:08:58 +00:00
+ cmdArgs = append(cmdArgs, netns.Path())
+
+ logrus.Debugf("pasta arguments: %s", strings.Join(cmdArgs, " "))
+
+ // pasta forks once ready, and quits once we delete the target namespace
+ _, err := exec.Command(path, cmdArgs...).Output()
+ if err != nil {
+ return errors.Wrapf(err, "failed to start pasta: %s",
+ err.(*exec.ExitError).Stderr)
+ }
+
+ return nil
+}
diff --git a/pkg/namespaces/namespaces.go b/pkg/namespaces/namespaces.go
2022-05-02 19:46:13 +00:00
index c95f8e275..46fa74640 100644
2022-02-19 04:08:58 +00:00
--- a/pkg/namespaces/namespaces.go
+++ b/pkg/namespaces/namespaces.go
@@ -19,6 +19,7 @@ const (
privateType = "private"
shareableType = "shareable"
slirpType = "slirp4netns"
+ pastaType = "pasta"
)
// CgroupMode represents cgroup mode in the container.
2022-05-02 19:46:13 +00:00
@@ -393,6 +394,11 @@ func (n NetworkMode) IsSlirp4netns() bool {
2022-02-19 04:08:58 +00:00
return n == slirpType || strings.HasPrefix(string(n), slirpType+":")
}
+// IsPasta indicates if we are running a rootless network stack using pasta
+func (n NetworkMode) IsPasta() bool {
+ return n == pastaType || strings.HasPrefix(string(n), pastaType + ":")
+}
+
// IsNS indicates a network namespace passed in by path (ns:<path>)
func (n NetworkMode) IsNS() bool {
return strings.HasPrefix(string(n), nsType)
diff --git a/pkg/specgen/generate/namespaces.go b/pkg/specgen/generate/namespaces.go
2022-05-02 19:46:13 +00:00
index 37d561ec2..3404746ee 100644
2022-02-19 04:08:58 +00:00
--- a/pkg/specgen/generate/namespaces.go
+++ b/pkg/specgen/generate/namespaces.go
2022-05-02 19:46:13 +00:00
@@ -262,6 +262,16 @@ func namespaceOptions(s *specgen.SpecGenerator, rt *libpod.Runtime, pod *libpod.
2022-02-19 04:08:58 +00:00
val = fmt.Sprintf("slirp4netns:%s", s.NetNS.Value)
}
toReturn = append(toReturn, libpod.WithNetNS(portMappings, expose, postConfigureNetNS, val, nil))
+ case specgen.Pasta:
2022-05-02 19:46:13 +00:00
+ portMappings, expose, err := createPortMappings(s, imageData)
2022-02-19 04:08:58 +00:00
+ if err != nil {
+ return nil, err
+ }
+ val := "pasta"
+ if s.NetNS.Value != "" {
+ val = fmt.Sprintf("pasta:%s", s.NetNS.Value)
+ }
+ toReturn = append(toReturn, libpod.WithNetNS(portMappings, expose, postConfigureNetNS, val, nil))
case specgen.Private:
fallthrough
case specgen.Bridge:
diff --git a/pkg/specgen/generate/pod_create.go b/pkg/specgen/generate/pod_create.go
2022-05-02 19:46:13 +00:00
index a3408b402..7d83e9ae1 100644
2022-02-19 04:08:58 +00:00
--- a/pkg/specgen/generate/pod_create.go
+++ b/pkg/specgen/generate/pod_create.go
2022-05-02 19:46:13 +00:00
@@ -233,6 +233,12 @@ func MapSpec(p *specgen.PodSpecGenerator) (*specgen.SpecGenerator, error) {
2022-02-19 04:08:58 +00:00
p.InfraContainerSpec.NetworkOptions = p.NetworkOptions
p.InfraContainerSpec.NetNS.NSMode = specgen.NamespaceMode("slirp4netns")
}
+ case specgen.Pasta:
+ logrus.Debugf("Pod will use pasta")
+ if p.InfraContainerSpec.NetNS.NSMode != "host" {
+ p.InfraContainerSpec.NetworkOptions = p.NetworkOptions
+ p.InfraContainerSpec.NetNS.NSMode = specgen.NamespaceMode("pasta")
+ }
case specgen.NoNetwork:
logrus.Debugf("Pod will not use networking")
if len(p.InfraContainerSpec.PortMappings) > 0 ||
diff --git a/pkg/specgen/namespaces.go b/pkg/specgen/namespaces.go
2022-05-02 19:46:13 +00:00
index 7a7ca2706..861d08f89 100644
2022-02-19 04:08:58 +00:00
--- a/pkg/specgen/namespaces.go
+++ b/pkg/specgen/namespaces.go
2022-05-02 19:46:13 +00:00
@@ -51,6 +51,9 @@ const (
2022-02-19 04:08:58 +00:00
// be used.
// Only used with the network namespace, invalid otherwise.
Slirp NamespaceMode = "slirp4netns"
+ // Pasta indicates that a pasta network stack should be used.
+ // Only used with the network namespace, invalid otherwise.
+ Pasta NamespaceMode = "pasta"
// KeepId indicates a user namespace to keep the owner uid inside
// of the namespace itself.
// Only used with the user namespace, invalid otherwise.
2022-05-02 19:46:13 +00:00
@@ -153,7 +156,7 @@ func validateNetNS(n *Namespace) error {
2022-02-19 04:08:58 +00:00
return nil
}
switch n.NSMode {
- case Slirp:
+ case Slirp, Pasta:
break
case "", Default, Host, Path, FromContainer, FromPod, Private, NoNetwork, Bridge:
break
2022-05-02 19:46:13 +00:00
@@ -196,7 +199,7 @@ func (n *Namespace) validate() error {
2022-02-19 04:08:58 +00:00
switch n.NSMode {
case "", Default, Host, Path, FromContainer, FromPod, Private:
// Valid, do nothing
- case NoNetwork, Bridge, Slirp:
+ case NoNetwork, Bridge, Slirp, Pasta:
return errors.Errorf("cannot use network modes with non-network namespace")
default:
return errors.Errorf("invalid namespace type %s specified", n.NSMode)
2022-05-02 19:46:13 +00:00
@@ -328,6 +331,8 @@ func ParseNetworkNamespace(ns string, rootlessDefaultCNI bool) (Namespace, map[s
2022-02-19 04:08:58 +00:00
switch {
case ns == string(Slirp), strings.HasPrefix(ns, string(Slirp)+":"):
toReturn.NSMode = Slirp
+ case ns == string(Pasta), strings.HasPrefix(ns, string(Pasta) + ":"):
+ toReturn.NSMode = Pasta
case ns == string(FromPod):
toReturn.NSMode = FromPod
case ns == "" || ns == string(Default) || ns == string(Private):
2022-05-02 19:46:13 +00:00
@@ -396,6 +401,13 @@ func ParseNetworkFlag(networks []string) (Namespace, map[string]types.PerNetwork
2022-02-19 04:08:58 +00:00
networkOptions[parts[0]] = strings.Split(parts[1], ",")
}
toReturn.NSMode = Slirp
+ case ns == string(Pasta), strings.HasPrefix(ns, string(Pasta) + ":"):
+ parts := strings.SplitN(ns, ":", 2)
+ if len(parts) > 1 {
+ networkOptions = make(map[string][]string)
+ networkOptions[parts[0]] = strings.Split(parts[1], ",")
+ }
+ toReturn.NSMode = Pasta
case ns == string(FromPod):
toReturn.NSMode = FromPod
case ns == "" || ns == string(Default) || ns == string(Private):
2022-05-02 19:46:13 +00:00
@@ -472,7 +484,7 @@ func ParseNetworkFlag(networks []string) (Namespace, map[string]types.PerNetwork
2022-02-19 04:08:58 +00:00
if parts[0] == "" {
return toReturn, nil, nil, errors.Wrapf(define.ErrInvalidArg, "network name cannot be empty")
}
- if util.StringInSlice(parts[0], []string{string(Bridge), string(Slirp), string(FromPod), string(NoNetwork),
+ if util.StringInSlice(parts[0], []string{string(Bridge), string(Slirp), string(Pasta), string(FromPod), string(NoNetwork),
string(Default), string(Private), string(Path), string(FromContainer), string(Host)}) {
return toReturn, nil, nil, errors.Wrapf(define.ErrInvalidArg, "can only set extra network names, selected mode %s conflicts with bridge", parts[0])
}
diff --git a/pkg/specgen/podspecgen.go b/pkg/specgen/podspecgen.go
index 759caa0c0..f95bbffc7 100644
--- a/pkg/specgen/podspecgen.go
+++ b/pkg/specgen/podspecgen.go
@@ -93,7 +93,7 @@ type PodNetworkConfig struct {
// PortMappings is a set of ports to map into the infra container.
// As, by default, containers share their network with the infra
// container, this will forward the ports to the entire pod.
- // Only available if NetNS is set to Bridge or Slirp.
+ // Only available if NetNS is set to Bridge, Slirp, or Pasta.
// Optional.
PortMappings []types.PortMapping `json:"portmappings,omitempty"`
// Map of networks names to ids the container should join to.
--
2022-05-02 19:46:13 +00:00
2.35.1
2022-02-19 04:08:58 +00:00
