External/passt
1
0
Fork 0
mirror of https://passt.top/passt synced 2024-11-10 06:30:13 +00:00
Code Issues Packages Projects Releases Wiki Activity
ec2691a12e
passt/test/distro/opensuse

209 lines
8.6 KiB
Plaintext
Raw Normal View History

passt: Relicense to GPL 2.0, or any later version In practical terms, passt doesn't benefit from the additional protection offered by the AGPL over the GPL, because it's not suitable to be executed over a computer network. Further, restricting the distribution under the version 3 of the GPL wouldn't provide any practical advantage either, as long as the passt codebase is concerned, and might cause unnecessary compatibility dilemmas. Change licensing terms to the GNU General Public License Version 2, or any later version, with written permission from all current and past contributors, namely: myself, David Gibson, Laine Stump, Andrea Bolognani, Paul Holzinger, Richard W.M. Jones, Chris Kuhn, Florian Weimer, Giuseppe Scrivano, Stefan Hajnoczi, and Vasiliy Ulyanov. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2023-04-05 18:11:44 +00:00
# SPDX-License-Identifier: GPL-2.0-or-later
test: Add distribution tests for several architectures and kernel versions The new tests check build and a simple case with pasta sending a short message in both directions (namespace to init, init to namespace). Tests cover a mix of Debian, Fedora, OpenSUSE and Ubuntu combinations on aarch64, i386, ppc64, ppc64le, s390x, x86_64. Builds tested starting from approximately glibc 2.19, gcc 4.7, and actual functionality approximately from 4.4 kernels, glibc 2.25, gcc 4.8, all the way up to current glibc/gcc/kernel versions. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2022-01-26 06:45:16 +00:00
#
# PASST - Plug A Simple Socket Transport
# for qemu/UNIX domain socket mode
#
# PASTA - Pack A Subtle Tap Abstraction
# for network namespace/tap device mode
#
# test/distro/opensuse - OpenSUSE builds, get packages via passt, test pasta
#
# Copyright (c) 2021 Red Hat GmbH
# Author: Stefano Brivio <sbrivio@redhat.com>
test: Use paths in __STATEDIR__ instead of 'temp' and 'tempdir' directives Instead of using the 'temp' and 'tempdir' DSL directives to create temporary files, use fixed paths relative to __STATEDIR__. This has two advantages: 1) The files are automatically cleaned up if the tests fail (and even if that doesn't work they're easier to clean up manuall) 2) When debugging tests it's easier to figure out which of the temporary files are relevant to whatever's going wrong Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2022-09-13 04:35:23 +00:00
set PIDFILE __STATEDIR__/passt.pid
tests: Move distro image download to asset build makefile Rather than directly download distro images from the test scripts, handle all the downloads during the test asset build, then just clone them for the tests themselves. This avoids repeated downloads which can be very slow when debugging failing tests. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> [sbrivio: Add OPENSUSE_IMGS to DOWNLOAD_ASSETS in Makefile, and note that xzcat doesn't take a -O option in test/distro/opensuse] Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2022-07-06 07:29:07 +00:00
htools qemu-img virt-edit guestfish head sed cat kill qemu-system-x86_64 qemu-system-aarch64 xzcat tr
test: Add distribution tests for several architectures and kernel versions The new tests check build and a simple case with pasta sending a short message in both directions (namespace to init, init to namespace). Tests cover a mix of Debian, Fedora, OpenSUSE and Ubuntu combinations on aarch64, i386, ppc64, ppc64le, s390x, x86_64. Builds tested starting from approximately glibc 2.19, gcc 4.7, and actual functionality approximately from 4.4 kernels, glibc 2.25, gcc 4.8, all the way up to current glibc/gcc/kernel versions. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2022-01-26 06:45:16 +00:00
# Quick pasta test: send message from init to ns, and from ns to init
def distro_quick_pasta_test
test: Convert distro tests to use socat instead of nc/ncat We've recently converted most of our tests to use socat instead of nc/netcat/ncat, because socat is more powerful and we don't need to deal with the several possible variants of netcat. We still use nc or ncat for the distro tests. Because there we control the guest environment and can pick our tools, there isn't the same reason to switch to socat. However, using socat here as well makes the tests a bit easier to read, and doesn't require people reading or modifying them to become familiar with an additional tool. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> [sbrivio: keep using netcat-openbsd in Ubuntu 16.04 ppc64 test, as socat is unavailable there] Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2022-08-18 06:13:49 +00:00
host (socat -u TCP6-LISTEN:10000 OPEN:/tmp/init_msg,create,trunc; echo "from_init" | socat -u STDIN TCP6:[::1]:9999) &
test: Add distribution tests for several architectures and kernel versions The new tests check build and a simple case with pasta sending a short message in both directions (namespace to init, init to namespace). Tests cover a mix of Debian, Fedora, OpenSUSE and Ubuntu combinations on aarch64, i386, ppc64, ppc64le, s390x, x86_64. Builds tested starting from approximately glibc 2.19, gcc 4.7, and actual functionality approximately from 4.4 kernels, glibc 2.25, gcc 4.8, all the way up to current glibc/gcc/kernel versions. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2022-01-26 06:45:16 +00:00
hostb ./pasta
sleep 1
host PS1='$ '
test: Convert distro tests to use socat instead of nc/ncat We've recently converted most of our tests to use socat instead of nc/netcat/ncat, because socat is more powerful and we don't need to deal with the several possible variants of netcat. We still use nc or ncat for the distro tests. Because there we control the guest environment and can pick our tools, there isn't the same reason to switch to socat. However, using socat here as well makes the tests a bit easier to read, and doesn't require people reading or modifying them to become familiar with an additional tool. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> [sbrivio: keep using netcat-openbsd in Ubuntu 16.04 ppc64 test, as socat is unavailable there] Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2022-08-18 06:13:49 +00:00
host socat -u TCP6-LISTEN:9999 OPEN:/tmp/ns_msg,create,trunc &
test: Add distribution tests for several architectures and kernel versions The new tests check build and a simple case with pasta sending a short message in both directions (namespace to init, init to namespace). Tests cover a mix of Debian, Fedora, OpenSUSE and Ubuntu combinations on aarch64, i386, ppc64, ppc64le, s390x, x86_64. Builds tested starting from approximately glibc 2.19, gcc 4.7, and actual functionality approximately from 4.4 kernels, glibc 2.25, gcc 4.8, all the way up to current glibc/gcc/kernel versions. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2022-01-26 06:45:16 +00:00
sleep 2
test: Convert distro tests to use socat instead of nc/ncat We've recently converted most of our tests to use socat instead of nc/netcat/ncat, because socat is more powerful and we don't need to deal with the several possible variants of netcat. We still use nc or ncat for the distro tests. Because there we control the guest environment and can pick our tools, there isn't the same reason to switch to socat. However, using socat here as well makes the tests a bit easier to read, and doesn't require people reading or modifying them to become familiar with an additional tool. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> [sbrivio: keep using netcat-openbsd in Ubuntu 16.04 ppc64 test, as socat is unavailable there] Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2022-08-18 06:13:49 +00:00
host echo "from_ns" | socat -u STDIN TCP6:[::1]:10000
test: Add distribution tests for several architectures and kernel versions The new tests check build and a simple case with pasta sending a short message in both directions (namespace to init, init to namespace). Tests cover a mix of Debian, Fedora, OpenSUSE and Ubuntu combinations on aarch64, i386, ppc64, ppc64le, s390x, x86_64. Builds tested starting from approximately glibc 2.19, gcc 4.7, and actual functionality approximately from 4.4 kernels, glibc 2.25, gcc 4.8, all the way up to current glibc/gcc/kernel versions. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2022-01-26 06:45:16 +00:00
sleep 2
host echo
test/distro: Avoid race between display of ns_msg and netcat exiting The shell might report 'nc -6 -l -p 9999 > /tmp/ns_msg' as done even after the subsequent 'echo' is done: wait one second before reading out /tmp/ns_msg, to ensure we read that instead of the "Done" message. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2022-01-30 02:09:46 +00:00
sleep 1
test: Add distribution tests for several architectures and kernel versions The new tests check build and a simple case with pasta sending a short message in both directions (namespace to init, init to namespace). Tests cover a mix of Debian, Fedora, OpenSUSE and Ubuntu combinations on aarch64, i386, ppc64, ppc64le, s390x, x86_64. Builds tested starting from approximately glibc 2.19, gcc 4.7, and actual functionality approximately from 4.4 kernels, glibc 2.25, gcc 4.8, all the way up to current glibc/gcc/kernel versions. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2022-01-26 06:45:16 +00:00
hout NS_MSG cat /tmp/ns_msg
check [ __NS_MSG__ = "from_init" ]
hostb exit
host echo
hout INIT_MSG cat /tmp/init_msg
check [ __INIT_MSG__ = "from_ns" ]
endef
# Start passt, set common variables
test: Switch to qemu -netdev stream option instead of using qrap qemu commit 13c6be96618c ("net: stream: add unix socket") introduces support for native AF_UNIX support, finally making qrap useless. We can't quite drop that yet until a qemu release includes it, and then we'll need to wait a while for users to switch anyway, but at least for tests, we can use that support. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2022-11-04 01:16:21 +00:00
hostb ./passt -s __STATEDIR__/passt.socket -P __PIDFILE__ &
test: Add distribution tests for several architectures and kernel versions The new tests check build and a simple case with pasta sending a short message in both directions (namespace to init, init to namespace). Tests cover a mix of Debian, Fedora, OpenSUSE and Ubuntu combinations on aarch64, i386, ppc64, ppc64le, s390x, x86_64. Builds tested starting from approximately glibc 2.19, gcc 4.7, and actual functionality approximately from 4.4 kernels, glibc 2.25, gcc 4.8, all the way up to current glibc/gcc/kernel versions. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2022-01-26 06:45:16 +00:00
sleep 1
host echo
hout DNS6 sed -n 's/^nameserver \([^:]*:\)\([^%]*\).*/\1\2/p' /etc/resolv.conf | head -1
Makefile: Ugly hack to get a "plain" Markdown version of README Distribution packages reasonably expect to have a human-readable Markdown version of the README under /usr/share/doc/, but all we have right now is a heavily web-oriented version. Introduce a ugly hack to strip web-oriented parts from the current README and install it. It should probably work the other way around: a human-readable README could be used as a source for the web page. But cgit needs a file that's in the tree, not something that can be built, and https://passt.top/ is based on cgit. It should eventually be doable to work around this in cgit, instead. Reported-by: Benson Muite <benson_muite@emailplus.org> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2022-08-09 22:21:09 +00:00
hout GUEST_FILES ls -1 *.c *.h *.sh passt.1 qrap.1 Makefile README.md | tr '\n' ' '; echo
test: Add distribution tests for several architectures and kernel versions The new tests check build and a simple case with pasta sending a short message in both directions (namespace to init, init to namespace). Tests cover a mix of Debian, Fedora, OpenSUSE and Ubuntu combinations on aarch64, i386, ppc64, ppc64le, s390x, x86_64. Builds tested starting from approximately glibc 2.19, gcc 4.7, and actual functionality approximately from 4.4 kernels, glibc 2.25, gcc 4.8, all the way up to current glibc/gcc/kernel versions. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2022-01-26 06:45:16 +00:00
test OpenSUSE Leap 15.1
test: Use paths in __STATEDIR__ instead of 'temp' and 'tempdir' directives Instead of using the 'temp' and 'tempdir' DSL directives to create temporary files, use fixed paths relative to __STATEDIR__. This has two advantages: 1) The files are automatically cleaned up if the tests fail (and even if that doesn't work they're easier to clean up manuall) 2) When debugging tests it's easier to figure out which of the temporary files are relevant to whatever's going wrong Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2022-09-13 04:35:23 +00:00
set IMG __STATEDIR__/opensuse-15.1-x86_64.img
tests: Move distro image download to asset build makefile Rather than directly download distro images from the test scripts, handle all the downloads during the test asset build, then just clone them for the tests themselves. This avoids repeated downloads which can be very slow when debugging failing tests. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> [sbrivio: Add OPENSUSE_IMGS to DOWNLOAD_ASSETS in Makefile, and note that xzcat doesn't take a -O option in test/distro/opensuse] Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2022-07-06 07:29:07 +00:00
host qemu-img create -f qcow2 -F qcow2 -b __BASEPATH__/openSUSE-Leap-15.1-JeOS.x86_64-kvm-and-xen.qcow2 __IMG__
test: Add distribution tests for several architectures and kernel versions The new tests check build and a simple case with pasta sending a short message in both directions (namespace to init, init to namespace). Tests cover a mix of Debian, Fedora, OpenSUSE and Ubuntu combinations on aarch64, i386, ppc64, ppc64le, s390x, x86_64. Builds tested starting from approximately glibc 2.19, gcc 4.7, and actual functionality approximately from 4.4 kernels, glibc 2.25, gcc 4.8, all the way up to current glibc/gcc/kernel versions. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2022-01-26 06:45:16 +00:00
host guestfish --rw -a __IMG__ -i rm '/usr/lib/systemd/system/systemd-journald.service'
host guestfish --rw -a __IMG__ -i rm /etc/systemd/system/default.target.wants/jeos-firstboot.service
host virt-edit -a __IMG__ /etc/systemd/system/getty.target.wants/getty@tty1.service -e 's/ExecStart=.*/ExecStart=\/sbin\/agetty --timeout 5000 --autologin root -i -8 --keep-baud 115200,38400,9600 ttyS0 $TERM/g'
host guestfish --rw -a __IMG__ -i copy-in __GUEST_FILES__ /root/
test: Switch to qemu -netdev stream option instead of using qrap qemu commit 13c6be96618c ("net: stream: add unix socket") introduces support for native AF_UNIX support, finally making qrap useless. We can't quite drop that yet until a qemu release includes it, and then we'll need to wait a while for users to switch anyway, but at least for tests, we can use that support. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2022-11-04 01:16:21 +00:00
host qemu-system-x86_64 -M pc,accel=kvm:tcg -m 1024 -nographic -serial stdio -nodefaults -no-reboot -nographic -vga none __IMG__ -device virtio-net-pci,netdev=s0 -netdev stream,id=s0,server=off,addr.type=unix,addr.path=__STATEDIR__/passt.socket
test: Add distribution tests for several architectures and kernel versions The new tests check build and a simple case with pasta sending a short message in both directions (namespace to init, init to namespace). Tests cover a mix of Debian, Fedora, OpenSUSE and Ubuntu combinations on aarch64, i386, ppc64, ppc64le, s390x, x86_64. Builds tested starting from approximately glibc 2.19, gcc 4.7, and actual functionality approximately from 4.4 kernels, glibc 2.25, gcc 4.8, all the way up to current glibc/gcc/kernel versions. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2022-01-26 06:45:16 +00:00
host PS1='$ '
host ip link set eth0 up
sleep 2
host echo "DNSSERVERS='__DNS6__'" | netconfig modify -s dns_resolver -i eth0
# zypper sometimes segfaults, hence the retries
test: Convert distro tests to use socat instead of nc/ncat We've recently converted most of our tests to use socat instead of nc/netcat/ncat, because socat is more powerful and we don't need to deal with the several possible variants of netcat. We still use nc or ncat for the distro tests. Because there we control the guest environment and can pick our tools, there isn't the same reason to switch to socat. However, using socat here as well makes the tests a bit easier to read, and doesn't require people reading or modifying them to become familiar with an additional tool. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> [sbrivio: keep using netcat-openbsd in Ubuntu 16.04 ppc64 test, as socat is unavailable there] Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2022-08-18 06:13:49 +00:00
host for i in $(seq 1 10); do zypper install -y gcc make socat && break; done; echo
test: Add distribution tests for several architectures and kernel versions The new tests check build and a simple case with pasta sending a short message in both directions (namespace to init, init to namespace). Tests cover a mix of Debian, Fedora, OpenSUSE and Ubuntu combinations on aarch64, i386, ppc64, ppc64le, s390x, x86_64. Builds tested starting from approximately glibc 2.19, gcc 4.7, and actual functionality approximately from 4.4 kernels, glibc 2.25, gcc 4.8, all the way up to current glibc/gcc/kernel versions. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2022-01-26 06:45:16 +00:00
host make clean
tests: Simplify explicit checks for command success A number of individual test cases use '*out' commands to check for success of specific commands they've issued. Now that the test harness is testing for success of all issued commands as a matter of course, we no longer need to do this. Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2022-05-12 06:43:33 +00:00
host CFLAGS="-Werror" make
test: Add distribution tests for several architectures and kernel versions The new tests check build and a simple case with pasta sending a short message in both directions (namespace to init, init to namespace). Tests cover a mix of Debian, Fedora, OpenSUSE and Ubuntu combinations on aarch64, i386, ppc64, ppc64le, s390x, x86_64. Builds tested starting from approximately glibc 2.19, gcc 4.7, and actual functionality approximately from 4.4 kernels, glibc 2.25, gcc 4.8, all the way up to current glibc/gcc/kernel versions. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2022-01-26 06:45:16 +00:00
distro_quick_pasta_test
hint
sleep 1
# PIDFILE is cleaned up when the next test starts, read it now
hout PID cat __PIDFILE__
test OpenSUSE Leap 15.2
test: Use paths in __STATEDIR__ instead of 'temp' and 'tempdir' directives Instead of using the 'temp' and 'tempdir' DSL directives to create temporary files, use fixed paths relative to __STATEDIR__. This has two advantages: 1) The files are automatically cleaned up if the tests fail (and even if that doesn't work they're easier to clean up manuall) 2) When debugging tests it's easier to figure out which of the temporary files are relevant to whatever's going wrong Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2022-09-13 04:35:23 +00:00
set IMG __STATEDIR__/opensuse-15.2-x86_64.img
tests: Move distro image download to asset build makefile Rather than directly download distro images from the test scripts, handle all the downloads during the test asset build, then just clone them for the tests themselves. This avoids repeated downloads which can be very slow when debugging failing tests. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> [sbrivio: Add OPENSUSE_IMGS to DOWNLOAD_ASSETS in Makefile, and note that xzcat doesn't take a -O option in test/distro/opensuse] Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2022-07-06 07:29:07 +00:00
host qemu-img create -f qcow2 -F qcow2 -b __BASEPATH__/openSUSE-Leap-15.2-JeOS.x86_64-kvm-and-xen.qcow2 __IMG__
test: Add distribution tests for several architectures and kernel versions The new tests check build and a simple case with pasta sending a short message in both directions (namespace to init, init to namespace). Tests cover a mix of Debian, Fedora, OpenSUSE and Ubuntu combinations on aarch64, i386, ppc64, ppc64le, s390x, x86_64. Builds tested starting from approximately glibc 2.19, gcc 4.7, and actual functionality approximately from 4.4 kernels, glibc 2.25, gcc 4.8, all the way up to current glibc/gcc/kernel versions. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2022-01-26 06:45:16 +00:00
host guestfish --rw -a __IMG__ -i rm '/usr/lib/systemd/system/systemd-journald.service'
host guestfish --rw -a __IMG__ -i rm /etc/systemd/system/default.target.wants/jeos-firstboot.service
host virt-edit -a __IMG__ /etc/systemd/system/getty.target.wants/getty@tty1.service -e 's/ExecStart=.*/ExecStart=\/sbin\/agetty --timeout 5000 --autologin root -i -8 --keep-baud 115200,38400,9600 ttyS0 $TERM/g'
host guestfish --rw -a __IMG__ -i copy-in __GUEST_FILES__ /root/
test: Switch to qemu -netdev stream option instead of using qrap qemu commit 13c6be96618c ("net: stream: add unix socket") introduces support for native AF_UNIX support, finally making qrap useless. We can't quite drop that yet until a qemu release includes it, and then we'll need to wait a while for users to switch anyway, but at least for tests, we can use that support. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2022-11-04 01:16:21 +00:00
host qemu-system-x86_64 -M pc,accel=kvm:tcg -m 1024 -nographic -serial stdio -nodefaults -no-reboot -nographic -vga none __IMG__ -device virtio-net-pci,netdev=s0 -netdev stream,id=s0,server=off,addr.type=unix,addr.path=__STATEDIR__/passt.socket
test: Add distribution tests for several architectures and kernel versions The new tests check build and a simple case with pasta sending a short message in both directions (namespace to init, init to namespace). Tests cover a mix of Debian, Fedora, OpenSUSE and Ubuntu combinations on aarch64, i386, ppc64, ppc64le, s390x, x86_64. Builds tested starting from approximately glibc 2.19, gcc 4.7, and actual functionality approximately from 4.4 kernels, glibc 2.25, gcc 4.8, all the way up to current glibc/gcc/kernel versions. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2022-01-26 06:45:16 +00:00
host PS1='$ '
host ip link set eth0 up
sleep 2
host echo "DNSSERVERS='__DNS6__'" | netconfig modify -s dns_resolver -i eth0
# zypper sometimes segfaults, hence the retries
test: Convert distro tests to use socat instead of nc/ncat We've recently converted most of our tests to use socat instead of nc/netcat/ncat, because socat is more powerful and we don't need to deal with the several possible variants of netcat. We still use nc or ncat for the distro tests. Because there we control the guest environment and can pick our tools, there isn't the same reason to switch to socat. However, using socat here as well makes the tests a bit easier to read, and doesn't require people reading or modifying them to become familiar with an additional tool. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> [sbrivio: keep using netcat-openbsd in Ubuntu 16.04 ppc64 test, as socat is unavailable there] Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2022-08-18 06:13:49 +00:00
host for i in $(seq 1 10); do zypper install -y gcc make socat && break; done; echo
test: Add distribution tests for several architectures and kernel versions The new tests check build and a simple case with pasta sending a short message in both directions (namespace to init, init to namespace). Tests cover a mix of Debian, Fedora, OpenSUSE and Ubuntu combinations on aarch64, i386, ppc64, ppc64le, s390x, x86_64. Builds tested starting from approximately glibc 2.19, gcc 4.7, and actual functionality approximately from 4.4 kernels, glibc 2.25, gcc 4.8, all the way up to current glibc/gcc/kernel versions. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2022-01-26 06:45:16 +00:00
host make clean
tests: Simplify explicit checks for command success A number of individual test cases use '*out' commands to check for success of specific commands they've issued. Now that the test harness is testing for success of all issued commands as a matter of course, we no longer need to do this. Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2022-05-12 06:43:33 +00:00
host CFLAGS="-Werror" make
test: Add distribution tests for several architectures and kernel versions The new tests check build and a simple case with pasta sending a short message in both directions (namespace to init, init to namespace). Tests cover a mix of Debian, Fedora, OpenSUSE and Ubuntu combinations on aarch64, i386, ppc64, ppc64le, s390x, x86_64. Builds tested starting from approximately glibc 2.19, gcc 4.7, and actual functionality approximately from 4.4 kernels, glibc 2.25, gcc 4.8, all the way up to current glibc/gcc/kernel versions. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2022-01-26 06:45:16 +00:00
distro_quick_pasta_test
hint
sleep 1
test OpenSUSE Leap 15.3
test: Use paths in __STATEDIR__ instead of 'temp' and 'tempdir' directives Instead of using the 'temp' and 'tempdir' DSL directives to create temporary files, use fixed paths relative to __STATEDIR__. This has two advantages: 1) The files are automatically cleaned up if the tests fail (and even if that doesn't work they're easier to clean up manuall) 2) When debugging tests it's easier to figure out which of the temporary files are relevant to whatever's going wrong Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2022-09-13 04:35:23 +00:00
set IMG __STATEDIR__/opensuse-15.3-x86_64.img
tests: Move distro image download to asset build makefile Rather than directly download distro images from the test scripts, handle all the downloads during the test asset build, then just clone them for the tests themselves. This avoids repeated downloads which can be very slow when debugging failing tests. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> [sbrivio: Add OPENSUSE_IMGS to DOWNLOAD_ASSETS in Makefile, and note that xzcat doesn't take a -O option in test/distro/opensuse] Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2022-07-06 07:29:07 +00:00
host qemu-img create -f qcow2 -F qcow2 -b __BASEPATH__/openSUSE-Leap-15.3-JeOS.x86_64-kvm-and-xen.qcow2 __IMG__
test: Add distribution tests for several architectures and kernel versions The new tests check build and a simple case with pasta sending a short message in both directions (namespace to init, init to namespace). Tests cover a mix of Debian, Fedora, OpenSUSE and Ubuntu combinations on aarch64, i386, ppc64, ppc64le, s390x, x86_64. Builds tested starting from approximately glibc 2.19, gcc 4.7, and actual functionality approximately from 4.4 kernels, glibc 2.25, gcc 4.8, all the way up to current glibc/gcc/kernel versions. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2022-01-26 06:45:16 +00:00
host guestfish --rw -a __IMG__ -i rm '/usr/lib/systemd/system/systemd-journald.service'
host guestfish --rw -a __IMG__ -i rm /etc/systemd/system/default.target.wants/jeos-firstboot.service
host virt-edit -a __IMG__ /etc/systemd/system/getty.target.wants/getty@tty1.service -e 's/ExecStart=.*/ExecStart=\/sbin\/agetty --timeout 5000 --autologin root -i -8 --keep-baud 115200,38400,9600 ttyS0 $TERM/g'
host guestfish --rw -a __IMG__ -i copy-in __GUEST_FILES__ /root/
test: Switch to qemu -netdev stream option instead of using qrap qemu commit 13c6be96618c ("net: stream: add unix socket") introduces support for native AF_UNIX support, finally making qrap useless. We can't quite drop that yet until a qemu release includes it, and then we'll need to wait a while for users to switch anyway, but at least for tests, we can use that support. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2022-11-04 01:16:21 +00:00
host qemu-system-x86_64 -M pc,accel=kvm:tcg -m 1024 -nographic -serial stdio -nodefaults -no-reboot -nographic -vga none __IMG__ -device virtio-net-pci,netdev=s0 -netdev stream,id=s0,server=off,addr.type=unix,addr.path=__STATEDIR__/passt.socket
test: Add distribution tests for several architectures and kernel versions The new tests check build and a simple case with pasta sending a short message in both directions (namespace to init, init to namespace). Tests cover a mix of Debian, Fedora, OpenSUSE and Ubuntu combinations on aarch64, i386, ppc64, ppc64le, s390x, x86_64. Builds tested starting from approximately glibc 2.19, gcc 4.7, and actual functionality approximately from 4.4 kernels, glibc 2.25, gcc 4.8, all the way up to current glibc/gcc/kernel versions. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2022-01-26 06:45:16 +00:00
# Multiple prompt logins might come up here
sleep 10
host PS1='$ '
host ip link set eth0 up
sleep 2
host echo "DNSSERVERS='__DNS6__'" | netconfig modify -s dns_resolver -i eth0
# zypper sometimes segfaults, hence the retries
test: Convert distro tests to use socat instead of nc/ncat We've recently converted most of our tests to use socat instead of nc/netcat/ncat, because socat is more powerful and we don't need to deal with the several possible variants of netcat. We still use nc or ncat for the distro tests. Because there we control the guest environment and can pick our tools, there isn't the same reason to switch to socat. However, using socat here as well makes the tests a bit easier to read, and doesn't require people reading or modifying them to become familiar with an additional tool. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> [sbrivio: keep using netcat-openbsd in Ubuntu 16.04 ppc64 test, as socat is unavailable there] Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2022-08-18 06:13:49 +00:00
host for i in $(seq 1 10); do zypper install -y gcc make socat && break; done; echo
test: Add distribution tests for several architectures and kernel versions The new tests check build and a simple case with pasta sending a short message in both directions (namespace to init, init to namespace). Tests cover a mix of Debian, Fedora, OpenSUSE and Ubuntu combinations on aarch64, i386, ppc64, ppc64le, s390x, x86_64. Builds tested starting from approximately glibc 2.19, gcc 4.7, and actual functionality approximately from 4.4 kernels, glibc 2.25, gcc 4.8, all the way up to current glibc/gcc/kernel versions. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2022-01-26 06:45:16 +00:00
host make clean
tests: Simplify explicit checks for command success A number of individual test cases use '*out' commands to check for success of specific commands they've issued. Now that the test harness is testing for success of all issued commands as a matter of course, we no longer need to do this. Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2022-05-12 06:43:33 +00:00
host CFLAGS="-Werror" make
test: Add distribution tests for several architectures and kernel versions The new tests check build and a simple case with pasta sending a short message in both directions (namespace to init, init to namespace). Tests cover a mix of Debian, Fedora, OpenSUSE and Ubuntu combinations on aarch64, i386, ppc64, ppc64le, s390x, x86_64. Builds tested starting from approximately glibc 2.19, gcc 4.7, and actual functionality approximately from 4.4 kernels, glibc 2.25, gcc 4.8, all the way up to current glibc/gcc/kernel versions. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2022-01-26 06:45:16 +00:00
distro_quick_pasta_test
hint
sleep 1
test OpenSUSE Tumbleweed aarch64
test: Use paths in __STATEDIR__ instead of 'temp' and 'tempdir' directives Instead of using the 'temp' and 'tempdir' DSL directives to create temporary files, use fixed paths relative to __STATEDIR__. This has two advantages: 1) The files are automatically cleaned up if the tests fail (and even if that doesn't work they're easier to clean up manuall) 2) When debugging tests it's easier to figure out which of the temporary files are relevant to whatever's going wrong Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2022-09-13 04:35:23 +00:00
set IMG __STATEDIR__/opensuse-tumbleweed-aarch64.img
tests: Move distro image download to asset build makefile Rather than directly download distro images from the test scripts, handle all the downloads during the test asset build, then just clone them for the tests themselves. This avoids repeated downloads which can be very slow when debugging failing tests. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> [sbrivio: Add OPENSUSE_IMGS to DOWNLOAD_ASSETS in Makefile, and note that xzcat doesn't take a -O option in test/distro/opensuse] Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2022-07-06 07:29:07 +00:00
host xzcat __BASEPATH__/openSUSE-Tumbleweed-ARM-JeOS-efi.aarch64.raw.xz > __IMG__
test: Add distribution tests for several architectures and kernel versions The new tests check build and a simple case with pasta sending a short message in both directions (namespace to init, init to namespace). Tests cover a mix of Debian, Fedora, OpenSUSE and Ubuntu combinations on aarch64, i386, ppc64, ppc64le, s390x, x86_64. Builds tested starting from approximately glibc 2.19, gcc 4.7, and actual functionality approximately from 4.4 kernels, glibc 2.25, gcc 4.8, all the way up to current glibc/gcc/kernel versions. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2022-01-26 06:45:16 +00:00
host virt-edit -a __IMG__ -m /dev/sda3 /usr/lib/systemd/system/serial-getty@.service -e 's/ExecStart=.*/ExecStart=\/sbin\/agetty --timeout 5000 --autologin root -i -8 --keep-baud 115200,38400,9600 %I $TERM/g'
host guestfish --rw -a __IMG__ -i copy-in __GUEST_FILES__ /root/
test: Switch to qemu -netdev stream option instead of using qrap qemu commit 13c6be96618c ("net: stream: add unix socket") introduces support for native AF_UNIX support, finally making qrap useless. We can't quite drop that yet until a qemu release includes it, and then we'll need to wait a while for users to switch anyway, but at least for tests, we can use that support. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2022-11-04 01:16:21 +00:00
host qemu-system-aarch64 -m 2048 -cpu cortex-a57 -smp 2 -M virt -bios __BASEPATH__/QEMU_EFI.fd -nodefaults -nographic -vga none -serial stdio __IMG__ -device virtio-net-pci,netdev=s0 -netdev stream,id=s0,server=off,addr.type=unix,addr.path=__STATEDIR__/passt.socket
test: Add distribution tests for several architectures and kernel versions The new tests check build and a simple case with pasta sending a short message in both directions (namespace to init, init to namespace). Tests cover a mix of Debian, Fedora, OpenSUSE and Ubuntu combinations on aarch64, i386, ppc64, ppc64le, s390x, x86_64. Builds tested starting from approximately glibc 2.19, gcc 4.7, and actual functionality approximately from 4.4 kernels, glibc 2.25, gcc 4.8, all the way up to current glibc/gcc/kernel versions. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2022-01-26 06:45:16 +00:00
host PS1='$ '
host ip link set enp0s1 up
sleep 10
host echo "DNSSERVERS='__DNS6__'" | netconfig modify -s dns_resolver -i enp0s1
sleep 10
# No segfaults ever seen with this
test: Convert distro tests to use socat instead of nc/ncat We've recently converted most of our tests to use socat instead of nc/netcat/ncat, because socat is more powerful and we don't need to deal with the several possible variants of netcat. We still use nc or ncat for the distro tests. Because there we control the guest environment and can pick our tools, there isn't the same reason to switch to socat. However, using socat here as well makes the tests a bit easier to read, and doesn't require people reading or modifying them to become familiar with an additional tool. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> [sbrivio: keep using netcat-openbsd in Ubuntu 16.04 ppc64 test, as socat is unavailable there] Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2022-08-18 06:13:49 +00:00
host zypper install -y gcc make socat; echo
test: Add distribution tests for several architectures and kernel versions The new tests check build and a simple case with pasta sending a short message in both directions (namespace to init, init to namespace). Tests cover a mix of Debian, Fedora, OpenSUSE and Ubuntu combinations on aarch64, i386, ppc64, ppc64le, s390x, x86_64. Builds tested starting from approximately glibc 2.19, gcc 4.7, and actual functionality approximately from 4.4 kernels, glibc 2.25, gcc 4.8, all the way up to current glibc/gcc/kernel versions. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2022-01-26 06:45:16 +00:00
host make clean
tests: Simplify explicit checks for command success A number of individual test cases use '*out' commands to check for success of specific commands they've issued. Now that the test harness is testing for success of all issued commands as a matter of course, we no longer need to do this. Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2022-05-12 06:43:33 +00:00
host CFLAGS="-Werror" make
test: Add distribution tests for several architectures and kernel versions The new tests check build and a simple case with pasta sending a short message in both directions (namespace to init, init to namespace). Tests cover a mix of Debian, Fedora, OpenSUSE and Ubuntu combinations on aarch64, i386, ppc64, ppc64le, s390x, x86_64. Builds tested starting from approximately glibc 2.19, gcc 4.7, and actual functionality approximately from 4.4 kernels, glibc 2.25, gcc 4.8, all the way up to current glibc/gcc/kernel versions. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2022-01-26 06:45:16 +00:00
distro_quick_pasta_test
hint
sleep 1
test/distro/opensuse: Add Tumbleweed armv7l test Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2022-02-28 03:25:53 +00:00
test OpenSUSE Tumbleweed armv7l
test: Use paths in __STATEDIR__ instead of 'temp' and 'tempdir' directives Instead of using the 'temp' and 'tempdir' DSL directives to create temporary files, use fixed paths relative to __STATEDIR__. This has two advantages: 1) The files are automatically cleaned up if the tests fail (and even if that doesn't work they're easier to clean up manuall) 2) When debugging tests it's easier to figure out which of the temporary files are relevant to whatever's going wrong Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2022-09-13 04:35:23 +00:00
set IMG __STATEDIR__/opensuse-tumbleweed-armv7l.img
set ZIMAGE __STATEDIR__/opensuse-tumbleweed-armv7l.zimage
set INITRD __STATEDIR__/opensuse-tumbleweed-armv7l.initrd
tests: Move distro image download to asset build makefile Rather than directly download distro images from the test scripts, handle all the downloads during the test asset build, then just clone them for the tests themselves. This avoids repeated downloads which can be very slow when debugging failing tests. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> [sbrivio: Add OPENSUSE_IMGS to DOWNLOAD_ASSETS in Makefile, and note that xzcat doesn't take a -O option in test/distro/opensuse] Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2022-07-06 07:29:07 +00:00
host xzcat __BASEPATH__/openSUSE-Tumbleweed-ARM-JeOS-efi.armv7l.raw.xz > __IMG__
test/distro/opensuse: Add Tumbleweed armv7l test Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2022-02-28 03:25:53 +00:00
host guestfish -a __IMG__ -i download /boot/zImage __ZIMAGE__
host guestfish -a __IMG__ -i download /boot/initrd __INITRD__
host virt-edit -a __IMG__ -m /dev/sda3 /usr/lib/systemd/system/serial-getty@.service -e 's/ExecStart=.*/ExecStart=\/sbin\/agetty --timeout 5000 --autologin root -i -8 --keep-baud 115200,38400,9600 %I $TERM/g'
host guestfish --rw -a __IMG__ -i copy-in __GUEST_FILES__ /root/
test: Switch to qemu -netdev stream option instead of using qrap qemu commit 13c6be96618c ("net: stream: add unix socket") introduces support for native AF_UNIX support, finally making qrap useless. We can't quite drop that yet until a qemu release includes it, and then we'll need to wait a while for users to switch anyway, but at least for tests, we can use that support. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2022-11-04 01:16:21 +00:00
host qemu-system-arm -M virt -m 1024 -nographic -serial stdio -nodefaults -no-reboot -nographic -vga none -kernel __ZIMAGE__ -initrd __INITRD__ -append 'root=/dev/sda3' -drive if=none,file=__IMG__,format=raw,id=hd,media=disk -device virtio-scsi-device -device scsi-hd,drive=hd -netdev socket,fd=5,id=passt -device virtio-net-device,netdev=passt
test/distro/opensuse: Add Tumbleweed armv7l test Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2022-02-28 03:25:53 +00:00
host PS1='$ '
host ip link set eth0 up
sleep 10
host echo "DNSSERVERS='__DNS6__'" | netconfig modify -s dns_resolver -i eth0
sleep 10
test: Convert distro tests to use socat instead of nc/ncat We've recently converted most of our tests to use socat instead of nc/netcat/ncat, because socat is more powerful and we don't need to deal with the several possible variants of netcat. We still use nc or ncat for the distro tests. Because there we control the guest environment and can pick our tools, there isn't the same reason to switch to socat. However, using socat here as well makes the tests a bit easier to read, and doesn't require people reading or modifying them to become familiar with an additional tool. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> [sbrivio: keep using netcat-openbsd in Ubuntu 16.04 ppc64 test, as socat is unavailable there] Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2022-08-18 06:13:49 +00:00
host zypper install -y gcc make socat; echo
test/distro/opensuse: Add Tumbleweed armv7l test Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2022-02-28 03:25:53 +00:00
host make clean
tests: Simplify explicit checks for command success A number of individual test cases use '*out' commands to check for success of specific commands they've issued. Now that the test harness is testing for success of all issued commands as a matter of course, we no longer need to do this. Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2022-05-12 06:43:33 +00:00
host CFLAGS="-Werror" make
test/distro/opensuse: Add Tumbleweed armv7l test Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2022-02-28 03:25:53 +00:00
distro_quick_pasta_test
hint
sleep 1
test: Add distribution tests for several architectures and kernel versions The new tests check build and a simple case with pasta sending a short message in both directions (namespace to init, init to namespace). Tests cover a mix of Debian, Fedora, OpenSUSE and Ubuntu combinations on aarch64, i386, ppc64, ppc64le, s390x, x86_64. Builds tested starting from approximately glibc 2.19, gcc 4.7, and actual functionality approximately from 4.4 kernels, glibc 2.25, gcc 4.8, all the way up to current glibc/gcc/kernel versions. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2022-01-26 06:45:16 +00:00
test OpenSUSE Tumbleweed
test: Use paths in __STATEDIR__ instead of 'temp' and 'tempdir' directives Instead of using the 'temp' and 'tempdir' DSL directives to create temporary files, use fixed paths relative to __STATEDIR__. This has two advantages: 1) The files are automatically cleaned up if the tests fail (and even if that doesn't work they're easier to clean up manuall) 2) When debugging tests it's easier to figure out which of the temporary files are relevant to whatever's going wrong Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2022-09-13 04:35:23 +00:00
set IMG __STATEDIR__/opensuse-tumbleweed-x86_64.img
tests: Move distro image download to asset build makefile Rather than directly download distro images from the test scripts, handle all the downloads during the test asset build, then just clone them for the tests themselves. This avoids repeated downloads which can be very slow when debugging failing tests. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> [sbrivio: Add OPENSUSE_IMGS to DOWNLOAD_ASSETS in Makefile, and note that xzcat doesn't take a -O option in test/distro/opensuse] Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2022-07-06 07:29:07 +00:00
host qemu-img create -f qcow2 -F qcow2 -b __BASEPATH__/openSUSE-Tumbleweed-JeOS.x86_64-kvm-and-xen.qcow2 __IMG__
test: Add distribution tests for several architectures and kernel versions The new tests check build and a simple case with pasta sending a short message in both directions (namespace to init, init to namespace). Tests cover a mix of Debian, Fedora, OpenSUSE and Ubuntu combinations on aarch64, i386, ppc64, ppc64le, s390x, x86_64. Builds tested starting from approximately glibc 2.19, gcc 4.7, and actual functionality approximately from 4.4 kernels, glibc 2.25, gcc 4.8, all the way up to current glibc/gcc/kernel versions. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2022-01-26 06:45:16 +00:00
host guestfish --rw -a __IMG__ -i rm /usr/lib/systemd/system/systemd-journald.service
host guestfish --rw -a __IMG__ -i rm /etc/systemd/system/default.target.wants/jeos-firstboot.service
host guestfish --rw -a __IMG__ -i rm /usr/lib/systemd/system/serial-getty@.service
host virt-edit -a __IMG__ /etc/systemd/system/getty.target.wants/getty@tty1.service -e 's/ExecStart=.*/ExecStart=\/sbin\/agetty --timeout 5000 --autologin root -i -8 --keep-baud 115200,38400,9600 ttyS0 $TERM/g'
host guestfish --rw -a __IMG__ -i copy-in __GUEST_FILES__ /root/
test: Switch to qemu -netdev stream option instead of using qrap qemu commit 13c6be96618c ("net: stream: add unix socket") introduces support for native AF_UNIX support, finally making qrap useless. We can't quite drop that yet until a qemu release includes it, and then we'll need to wait a while for users to switch anyway, but at least for tests, we can use that support. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2022-11-04 01:16:21 +00:00
host qemu-system-x86_64 -M pc,accel=kvm:tcg -m 1024 -nographic -serial stdio -nodefaults -no-reboot -nographic -vga none __IMG__ -device virtio-net-pci,netdev=s0 -netdev stream,id=s0,server=off,addr.type=unix,addr.path=__STATEDIR__/passt.socket
test: Add distribution tests for several architectures and kernel versions The new tests check build and a simple case with pasta sending a short message in both directions (namespace to init, init to namespace). Tests cover a mix of Debian, Fedora, OpenSUSE and Ubuntu combinations on aarch64, i386, ppc64, ppc64le, s390x, x86_64. Builds tested starting from approximately glibc 2.19, gcc 4.7, and actual functionality approximately from 4.4 kernels, glibc 2.25, gcc 4.8, all the way up to current glibc/gcc/kernel versions. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2022-01-26 06:45:16 +00:00
host PS1='$ '
host ip link set ens2 up
sleep 2
host echo "DNSSERVERS='__DNS6__'" | netconfig modify -s dns_resolver -i ens2
# zypper sometimes segfaults, hence the retries
test: Convert distro tests to use socat instead of nc/ncat We've recently converted most of our tests to use socat instead of nc/netcat/ncat, because socat is more powerful and we don't need to deal with the several possible variants of netcat. We still use nc or ncat for the distro tests. Because there we control the guest environment and can pick our tools, there isn't the same reason to switch to socat. However, using socat here as well makes the tests a bit easier to read, and doesn't require people reading or modifying them to become familiar with an additional tool. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> [sbrivio: keep using netcat-openbsd in Ubuntu 16.04 ppc64 test, as socat is unavailable there] Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2022-08-18 06:13:49 +00:00
host for i in $(seq 1 10); do zypper install -y gcc make socat && break; done; echo
test: Add distribution tests for several architectures and kernel versions The new tests check build and a simple case with pasta sending a short message in both directions (namespace to init, init to namespace). Tests cover a mix of Debian, Fedora, OpenSUSE and Ubuntu combinations on aarch64, i386, ppc64, ppc64le, s390x, x86_64. Builds tested starting from approximately glibc 2.19, gcc 4.7, and actual functionality approximately from 4.4 kernels, glibc 2.25, gcc 4.8, all the way up to current glibc/gcc/kernel versions. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2022-01-26 06:45:16 +00:00
host make clean
tests: Simplify explicit checks for command success A number of individual test cases use '*out' commands to check for success of specific commands they've issued. Now that the test harness is testing for success of all issued commands as a matter of course, we no longer need to do this. Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2022-05-12 06:43:33 +00:00
host CFLAGS="-Werror" make
test: Add distribution tests for several architectures and kernel versions The new tests check build and a simple case with pasta sending a short message in both directions (namespace to init, init to namespace). Tests cover a mix of Debian, Fedora, OpenSUSE and Ubuntu combinations on aarch64, i386, ppc64, ppc64le, s390x, x86_64. Builds tested starting from approximately glibc 2.19, gcc 4.7, and actual functionality approximately from 4.4 kernels, glibc 2.25, gcc 4.8, all the way up to current glibc/gcc/kernel versions. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2022-01-26 06:45:16 +00:00
distro_quick_pasta_test
hint
sleep 1
host kill __PID__
Reference in New Issue Copy Permalink