Rather than directly download distro images from the test scripts, handle
all the downloads during the test asset build, then just clone them for
the tests themselves. This avoids repeated downloads which can be very
slow when debugging failing tests.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
[sbrivio: Add OPENSUSE_IMGS to DOWNLOAD_ASSETS in Makefile, and note
that xzcat doesn't take a -O option in test/distro/opensuse]
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Currently test/run uses wildcards to run all of the tests in a directory.
However, that wildcard list is filtered down by the "onlyfor" directives
in the test files... usually to a single file.
Therefore, just explicitly list the files we *really* want to run for this
test mode. This makes it easier to see at the top level what tests will
be executed, and to change that list temporarily while debugging specific
failures.
This means the "onlyfor" directive no longer has any purpose, and we can
remove it. "onlyfor" was also the only used of the $MODE variable, so we
can remove that too.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The top level listing control of which tests to run is in test/run, however
it uses the test() function which runs an entire directory of test files,
filtered by some criteria. This makes it awkward to narrow down to a
subset of tests when debugging a specific failure.
To make this easier, have test() take an explicit list of test files to
run, and have the caller in test/run handle the directory traversal. The
construct we use for this is pretty awkward to handle the fact that we're
in the source tree root directory rather than test/ at this point in
test/run. Later cleanups will improve that.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The test scripts support a "req" directive which requires one test script
to be run before another. It's implemented by doing a topological sort
based on these directives in the runner scripts, which is about as awkward
as you'd expect in Bourne shell.
It turns out we only use this functionality in one place - to make the
"make install" test run after the plain "make" test. We also already have
a simpler way of making sure tests run in a specific order: just put them
into the same test script file.
So, remove support for the "req" directive and just fold the build/all and
build/install test scripts together.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Apparently qemu's ARM virt machine needs to be explicitly given a firmware
image, rather than just supplying a sane default. Unfortunately the EDK2
firmware image we need isn't in the same place on all host distros.
Currently the test scripts hardcode the Debian location, meaning it will
break on hosts that have it somewhere else. This patch searches multiple
locations for the firmware, and creates a local link during the asset build
phase, which the tests can then use.
For now it only searches the locations used by Debian and Fedora, but
that's a small improvement in robustness already, and can be later improved
further if we need to.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Move the download of mbuto and using it to create a sample initramfs to
the asset build makefile, rather than embedding it in the test scripts
themselves.
The two_guests tests used to use two separate copies of the mbuto
image. As an initramfs the mbuto image is strictly readonly though,
so that's not necessary. So, also use the same image for both guests.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
A number of passt/pasta testcases have initial steps which are just about
building images or other assets we need for the test proper. Repeating
these for each test run can be quite costly.
This patch makes a start on moving this sort of test asset building to
a separate phase before running the tests proper. For now just add a
Makefile to handle the asset building (although it doesn't build
anything yet), and make the path where we'll be building the assets
available to the tests.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
A lot of tests and examples invoke qemu with the command "kvm". However,
as far as I can tell, "kvm" being aliased to the appropriate qemu system
binary is Debian specific. The binary names from qemu upstream -
qemu-system-$ARCH - also aren't universal, but they are more common (they
should be good for both Debian and Fedora at least).
In order to still get KVM acceleration when available, we use the option
"-M accel=kvm:tcg" to tell qemu to try using either KVM or TCG in that
order
A number of the places we invoked "kvm" are expecting specifically an x86
guest, and so it's also safer to explicitly invoke qemu-system-x86_64.
Some others appear to be independent of the target arch (just wanting the
same arch as the host to allow KVM acceleration). Although I suspect there
may be more subtle x86 specific options in the qemu command lines, attempt
to preserve arch independence by using $(uname -m).
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Several tests run pp64le guests using "qemu-system-ppc64le". But, at the
system level there's no difference between ppc64 and ppc64le - it's the
same hardware, just placed into different endian modes by OS early boot
code. Reflecting that, qemu only supplies a single "qemu-system-ppc64".
Some distros alias qemu-system-ppc64le to qemu-system-ppc64 (Debian does),
but it's best not to count on this (Fedora doesn't, for example).
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
David reports that dhclient-script(8) on Fedora needs a number of
binaries that are not included in PROGS of the current mbuto profile,
and we would also need to include hostnamectl(1) there, which will
fail without a systemd init.
Embed a minimal script for dhclient(8) in the profile itself, written
to /sbin/dhclient-script at boot, to just check what we need to check
out of DHCP and DHCPv6 functionality.
While at it, drop busybox and logger from PROGS, as we don't need them,
and add hostname(1). While DHCP option 12 isn't supported yet by the
DHCP implementation in passt, we should probably add it soon.
Note: owing to the simplicity of this script, we now need to bring up
the interface before starting dhclient: add this in test scripts where
it's not the case yet.
Reported-by: David Gibson <david@gibson.dropbear.id.au>
Suggested-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
note that we need to bring up the interface before starting dhclient
This depends on a future change in mbuto to accept external profile
files. Add a file defining what we need for tests and demos, dropping
udhcpc and script as they're not needed anymore, and switch to it.
Suggested-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
There are several places which explicitly list the various generated
binaries, even though a $(BIN) variable already lists them. There are
several more places that list all the manpage files, introduce a
$(MANPAGES) variable to remove that repetition as well.
Tweak the generation of pasta.1 as a link to passt.1 so it's not just made
as a side effect of the pasta target.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
[sbrivio: add passt.1 and qrap.1 to guest files for distro tests]
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
A number of the testcases use options specific the OpenBSD version of
netcat. That's available in Debian, but not easily available in Fedora.
Switch the pasta tests to using the nmap version of netcat (a.k.a. ncat).
This is easily available in both Debian and Fedora, and appears to be a
bit more modern and maintained as well.
ncat generally requires explicit listen addresses (which is good for
clarity anywhere). Its default options appear to remove the need for the
-N and -q options.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
[sbrivio: changed one ncat listening address to IPv6 loopback]
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
For some reason, the passt/pasta tests and examples use dhclient for
DHCPv6, but in most cases use udhcpc for DHCPv4. Change it to use dhclient
for both DHCPv4 and DHCPv6. This means one less tool we need for testing,
plus dhclient is easily available on Fedora whereas udhcpc is not.
Note that the passt tests still rely on udhcpc indirectly because mbuto
wants to put it into the guest images it generates.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
A number of tests and examples use dhclient in both IPv4 and IPv6 modes.
We use "dhclient -6" for IPv6, but usually just "dhclient" for IPv4. Add
an explicit "-4" argument to make it more clear and explicit.
In addition, when dhclient is run from within pasta it usually won't be
"real" root, and so will not have access to write the default global pid
file. This results in a mostly harmless but irritating error:
Can't create /var/run/dhclient.pid: Permission denied
We can avoid that by using the --no-pid flag to dhclient.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
ip(8)'s ability to take abbreviated arguments (e.g. "li sh" instead of
"link show") is very handy when using it interactively, but it doesn't make
for very readable scripts and examples when shown that way.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
distro/fedora contains two versions of the basic tests, used for different
Fedora versions. One uses explicit listening address for netcat in some
extra places, the other does not. Apparently the older netcat versions
didn't require the explicit addresses. Not supplying addresses doesn't
test anything useful though, just a detail in netcat's behaviour. So,
it's cleaner to just always supply explicit addresses.
In addition, we're explicitly expecting the nmap version of ncat, also
known as "ncat". So, it's more explicit what we're after if we invoke it
via that name rather than "nc", which will go via an /etc/alternatives
link.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
[sbrivio: Fix port argument in distro_quick_pasta_test{,_fedora34} too]
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Having all those 'echo $?' is rather distracting in demos.
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Sefano Brivio <sbrivio@redhat.com>
...there are no 'test' directives in demo, and this causes a
script failure.
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
'sleep' always needs an argument, this was meant to introduce
a 2 seconds delay.
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
There's no need to return non-zero if there have been failures in
run(), because the exit value is already determined from the number
of failures reported in the log file.
Return zero, so that this doesn't cause the script to fail, given we
now run it with -e.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
There are a few occurrences of this assignment, which are needed to
re-add ::1 as loopback address after the MTU has been increased
back from a value below 1280 bytes.
This one, however, is redundant, and causes an error in the
execution.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
A number of individual test cases use '*out' commands to check for success
of specific commands they've issued. Now that the test harness is testing
for success of all issued commands as a matter of course, we no longer need
to do this.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Now that we have pane_status to check the success of commands issued to
panes, we can more easily check for the success of the 'which' commands
used to check tool availability, rather than constructing, then parsing
special "skip" output.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
When we use pane_wait to wait for a command issued to a tmux pane to finish
we have no idea whether the command succeeded or not. This means that the
test scripts can keep running long after the point something vital has
failed, making it difficult to work out what went wrong.
Add a new pane_status command that checks for success of the issued command
and use it in most places instead of pane_wait. We still need explicit
pane_wait where we're gathering explicit output with pane_parse, because
the way we check the status with 'echo $?' means we lose track of that
output.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
[sbrivio:
- instead of quitting the script, make a test fail if a command
issued in a pane fails during a test, and loop until the status code is
numeric in pane_status() as a hack to make it a bit more robust
- retain usage of pane_wait() in iperf3 and teardown functions as we
interrupt iperf3, passt, and pasta, so a non-zero exit code is expected
- drop bogus ns_{1,2}_wait() calls in teardown_two_guests(), those
functions were never implemented
- use pane_status() for "guest" test directives too
]
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Most commands issued during the testing scripts aren't explicitly checked
for errors. Therefore, if they fail, the shell will just keep on
executing. This makes it difficult to figure out where things started
going wrong if things fall over.
Run the whole script with the set -e mode so that it will exit in the case
of any (unchecked) failing command. To make this work we do need to add
explicit checks / fallbacks for some commands which we expect to fail.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
[sbrivio: use sh -e instead of setting -e later, so that we don't miss
anything before set -e is issued]
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
pane_parse() attempts to grab the output from the last command issued
into a tmux pane. It strips out control characters using tr, which in
particular includes the final \r\n. However, this won't fully strip
out terminal escape sequences. In particular this breaks if the shell
in the pane is bash, with enable-bracketed-paste enabled in readline.
That issues terminal sequences to enable and disable bracketed paste
mode around every shell prompt.
We can work around this because these escapes are followed by a \r
(CR). More generally, it seems reasonable to assume that any terminal
shenanigans followed by a CR, but not an LF is supposed to be hidden.
So, use sed to strip everything before the second last CR. We still
need the tr to remove the final \r\n from the string (sed processes a
line at a time, and doesn't consider the CRLF part of the buffer it's
processing).
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
[sbrivio: modify regexp to keep foo\r\r\n unchanged, by matching on at
least one CR and a non-CR afterwards: that's the usual output pattern
for bash on Debian 8 and Debian 9]
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
run_term() uses tmux set-option -g to globally set the default shell.
Unfortunately this hits a chicken-and-egg problem that's common with many
of tmux's session options. If there isn't already a tmux server running,
we can't connect to set the option. If we attempt this after starting our
session (and therefore the server), then the session will already be
started with the previous default shell.
In any case it's not a good idea to set tmux global options, since that
might interfere with whatever else the user is doing in tmux. So, instead
set the default-shell option locally to the session after starting it. To
make sure we get the right shell for our initial script, explicitly invoke
/bin/sh to interpret it.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The semantics of tmux's update-environment option are a bit confusing.
It says it means the given variables are copied into the session
environment from the source environment, but it's not entirely clear
what the "source" environment means.
From my experimentation it appeast to be the environment from which
the tmux *server* is launched, not the one issuing the 'new-session'
command. That makes it pretty much useles, certainly in our case where
we have no way of knowing if the user has pre-existing tmux sessions.
Instead use the new-session -e option to explicitly pass in the variables
we want to propagate.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The DEBUG option for tests/run enables debugging options to passt/pasta,
however that doesn't help with debugging the test scripts themselves, which
are fairly fragile.
Extend the DEBUG option so it also prints information on each command in
the test scripts to make it easier to work out where things are falling
over.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The XVFB variable is initialized at the beginning of test/run then never
used again. I'm assuming it's a leftover from some ealier iteration.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Ignore various files generated during build or test.
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reflect the recent changes in the Podman adaptation (no port
forwarding by default).
It turns out that by running two iperf3 processes, sometimes
slirp4netns blocks the second connection until the first test is
done, thus doubling the throughput. Use a single process for
slirp4netns with slirp4netns port handling.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
I didn't have time to investigate the root cause for the virtio_net
TX hang yet. Add a quick work-around for the moment being.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Pass to seccomp.sh a list of additional syscalls valgrind needs as
EXTRA_SYSCALLS in a new 'valgrind' make target, and add corresponding
support in seccomp.sh itself.
In test setup functions, start passt with valgrind, but not for
performance tests.
Add tests checking that valgrind exits without errors after all the
other tests in the group are done.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
--debug can be a bit too noisy, especially as single packets or
socket messages are logged: implement a new option, --trace,
implying --debug, that enables all debug messages.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Build-time selection of AVX2 flags and routines is not practical for
distributions, but limiting AVX2 usage to checksum routines with
specific run-time detection doesn't allow for easy performance gains
from auto-vectorisation of batched packet handling routines.
For x86_64, build non-AVX2 and AVX2 binaries, and implement a simple
wrapper replacing the current executable with the AVX2 build if it's
available, and if AVX2 is supported by the current CPU.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
