To send frames on the tap interface, the UDP uses a fairly complicated two
level batching. First multiple frames are gathered into a single "message"
for the qemu stream socket, then multiple messages are send with
sendmmsg(). We now have tap_send_frames() which already deals with sending
a number of frames, including batching and handling partial sends. Use
that to considerably simplify things.
This does make a couple of behavioural changes:
* We used to split messages to keep them under 32kiB (except when a
single frame was longer than that). The comments claim this is
needed to stop qemu from closing the connection, but we don't have any
equivalent logic for TCP. I wasn't able to reproduce the problem with
this series, although it was apparently easy to reproduce earlier.
My suspicion is that there was never an inherent need to keep messages
small, however with larger messages (and default kernel buffer sizes)
the chances of needing more than one resend for partial send()s is
greatly increased. We used not to correctly handle that case of
multiple resends, but now we do.
* Previously when we got a partial send on UDP, we would resend the
remainder of the entire "message", including multiple frames. The
common code now only resends the remainder of a single frame, simply
dropping any frames which weren't even partially sent. This is what
TCP always did and is probably a better idea for UDP too.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
pcapm() captures multiple frames from a msghdr, however the only thing it
cares about in the msghdr is the list of buffers, where it assumes there is
one frame to capture per buffer. That's what we want for its single caller
but it's not the only obvious choice here (one frame per msghdr would
arguably make more sense in isolation). In addition pcapm() has logic
that only makes sense in the context of the passt specific path its called
from: it skips the first 4 bytes of each buffer, because those have the
qemu vnet_len rather than the frame proper.
Make this clearer by replacing pcapm() with pcap_multiple() which more
explicitly takes one struct iovec per frame, and parameterizes how much of
each buffer to skip (i.e. the offset of the frame within the buffer).
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
pcap(), pcapm() and pcapmm() duplicate some code, for the actual writing
to the capture file. The purpose of pcapm() and pcapmm() not calling
pcap() seems to be to avoid repeatedly calling gettimeofday() and to avoid
printing errors for every packet in a batch if there's a problem. We can
accomplish that while still sharing code by adding a new helper which
takes the packet timestamp as a parameter.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Logging to file is going to add some further complexity that we don't
want to squeeze into util.c.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
The --pcap or -p option can be used with or without an argument. If given,
the argument gives the name of the file to save a packet trace to. If
omitted, we generate a default name in /tmp.
Generating the default name isn't particularly useful though, since making
a suitable name can easily be done by the caller. Remove this feature.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
To reach (at least) a conceptually equivalent security level as
implemented by --enable-sandbox in slirp4netns, we need to create a
new mount namespace and pivot_root() into a new (empty) mountpoint, so
that passt and pasta can't access any filesystem resource after
initialisation.
While at it, also detach IPC, PID (only for passt, to prevent
vulnerabilities based on the knowledge of a target PID), and UTS
namespaces.
With this approach, if we apply the seccomp filters right after the
configuration step, the number of allowed syscalls grows further. To
prevent this, defer the application of seccomp policies after the
initialisation phase, before the main loop, that's where we expect bad
things to happen, potentially. This way, we get back to 22 allowed
syscalls for passt and 34 for pasta, on x86_64.
While at it, move #syscalls notes to specific code paths wherever it
conceptually makes sense.
We have to open all the file handles we'll ever need before
sandboxing:
- the packet capture file can only be opened once, drop instance
numbers from the default path and use the (pre-sandbox) PID instead
- /proc/net/tcp{,v6} and /proc/net/udp{,v6}, for automatic detection
of bound ports in pasta mode, are now opened only once, before
sandboxing, and their handles are stored in the execution context
- the UNIX domain socket for passt is also bound only once, before
sandboxing: to reject clients after the first one, instead of
closing the listening socket, keep it open, accept and immediately
discard new connection if we already have a valid one
Clarify the (unchanged) behaviour for --netns-only in the man page.
To actually make passt and pasta processes run in a separate PID
namespace, we need to unshare(CLONE_NEWPID) before forking to
background (if configured to do so). Introduce a small daemon()
implementation, __daemon(), that additionally saves the PID file
before forking. While running in foreground, the process itself can't
move to a new PID namespace (a process can't change the notion of its
own PID): mention that in the man page.
For some reason, fork() in a detached PID namespace causes SIGTERM
and SIGQUIT to be ignored, even if the handler is still reported as
SIG_DFL: add a signal handler that just exits.
We can now drop most of the pasta_child_handler() implementation,
that took care of terminating all processes running in the same
namespace, if pasta started a shell: the shell itself is now the
init process in that namespace, and all children will terminate
once the init process exits.
Issuing 'echo $$' in a detached PID namespace won't return the
actual namespace PID as seen from the init namespace: adapt
demo and test setup scripts to reflect that.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
This is the only remaining Linux-specific include -- drop it to avoid
clang-tidy warnings and to make code more portable.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
...mostly false positives, but a number of very relevant ones too,
in tcp_get_sndbuf(), tcp_conn_from_tap(), and siphash PREAMBLE().
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Unions and structs, you all have names now.
Take the chance to enable bugprone-reserved-identifier,
cert-dcl37-c, and cert-dcl51-cpp checkers in clang-tidy.
Provide a ffsl() weak declaration using gcc built-in.
Start reordering includes, but that's not enough for the
llvm-include-order checker yet.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
A mix of unchecked return values, a missing permission mask for
open(2) with O_CREAT, and some false positives from
-Wstringop-overflow and -Wmaybe-uninitialized.
Reported-by: Martin Hauke <mardnh@gmx.de>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Based on a patch from Giuseppe Scrivano, this adds the ability to:
- specify paths and names of target namespaces to join, instead of
a PID, also for user namespaces, with --userns
- request to join or create a network namespace only, without
entering or creating a user namespace, with --netns-only
- specify the base directory for netns mountpoints, with --nsrun-dir
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
[sbrivio: reworked logic to actually join the given namespaces when
they're not created, implemented --netns-only and --nsrun-dir,
updated pasta demo script and man page]
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
passt is stable enough, and dropping O_DSYNC makes reduces the impact
of capturing packets on timing, while running tests.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
If the guest disconnects, and a given name (without timestamp) for
the pcap file is passed, we would otherwise lose the packets
captured until that point.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Packets are received directly onto pre-cooked, static buffers
for IPv4 (with partial checksum pre-calculation) and IPv6 frames,
with pre-filled Ethernet addresses and, partially, IP headers,
and sent out from the same buffers with sendmmsg(), for both
passt and pasta (non-local traffic only) modes.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
PASTA (Pack A Subtle Tap Abstraction) provides quasi-native host
connectivity to an otherwise disconnected, unprivileged network
and user namespace, similarly to slirp4netns. Given that the
implementation is largely overlapping with PASST, no separate binary
is built: 'pasta' (and 'passt4netns' for clarity) both link to
'passt', and the mode of operation is selected depending on how the
binary is invoked. Usage example:
$ unshare -rUn
# echo $$
1871759
$ ./pasta 1871759 # From another terminal
# udhcpc -i pasta0 2>/dev/null
# ping -c1 pasta.pizza
PING pasta.pizza (64.190.62.111) 56(84) bytes of data.
64 bytes from 64.190.62.111 (64.190.62.111): icmp_seq=1 ttl=255 time=34.6 ms
--- pasta.pizza ping statistics ---
1 packets transmitted, 1 received, 0% packet loss, time 0ms
rtt min/avg/max/mdev = 34.575/34.575/34.575/0.000 ms
# ping -c1 spaghetti.pizza
PING spaghetti.pizza(2606:4700:3034::6815:147a (2606:4700:3034::6815:147a)) 56 data bytes
64 bytes from 2606:4700:3034::6815:147a (2606:4700:3034::6815:147a): icmp_seq=1 ttl=255 time=29.0 ms
--- spaghetti.pizza ping statistics ---
1 packets transmitted, 1 received, 0% packet loss, time 0ms
rtt min/avg/max/mdev = 28.967/28.967/28.967/0.000 ms
This entails a major rework, especially with regard to the storage of
tracked connections and to the semantics of epoll(7) references.
Indexing TCP and UDP bindings merely by socket proved to be
inflexible and unsuitable to handle different connection flows: pasta
also provides Layer-2 to Layer-2 socket mapping between init and a
separate namespace for local connections, using a pair of splice()
system calls for TCP, and a recvmmsg()/sendmmsg() pair for UDP local
bindings. For instance, building on the previous example:
# ip link set dev lo up
# iperf3 -s
$ iperf3 -c ::1 -Z -w 32M -l 1024k -P2 | tail -n4
[SUM] 0.00-10.00 sec 52.3 GBytes 44.9 Gbits/sec 283 sender
[SUM] 0.00-10.43 sec 52.3 GBytes 43.1 Gbits/sec receiver
iperf Done.
epoll(7) references now include a generic part in order to
demultiplex data to the relevant protocol handler, using 24
bits for the socket number, and an opaque portion reserved for
usage by the single protocol handlers, in order to track sockets
back to corresponding connections and bindings.
A number of fixes pertaining to TCP state machine and congestion
window handling are also included here.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
...sharing the same filesystem. Instead of a fixed path for the UNIX
domain socket, passt now uses a path with a counter, probing for
existing instances, and picking the first free one.
The demo script is updated accordingly -- it can now be started several
times to create multiple namespaces with an instance of passt each,
with addressing reflecting separate subnets, and NDP proxying between
them.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
With -DDEBUG, passt now saves guest-side traffic captures in
pcap format at /tmp/passt_<ISO8601 timestamp>.pcap. The timestamp
refers to time and date of start-up.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
