1
0
mirror of https://passt.top/passt synced 2024-12-24 22:55:21 +00:00
passt/test/distro/opensuse
David Gibson 1c36c8d3f8 test: Use paths in __STATEDIR__ instead of 'temp' and 'tempdir' directives
Instead of using the 'temp' and 'tempdir' DSL directives to create
temporary files, use fixed paths relative to __STATEDIR__.  This has two
advantages:
  1) The files are automatically cleaned up if the tests fail (and even if
     that doesn't work they're easier to clean up manuall)
  2) When debugging tests it's easier to figure out which of the temporary
     files are relevant to whatever's going wrong

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2022-09-13 11:12:41 +02:00

209 lines
8.3 KiB
Plaintext

# SPDX-License-Identifier: AGPL-3.0-or-later
#
# PASST - Plug A Simple Socket Transport
# for qemu/UNIX domain socket mode
#
# PASTA - Pack A Subtle Tap Abstraction
# for network namespace/tap device mode
#
# test/distro/opensuse - OpenSUSE builds, get packages via passt, test pasta
#
# Copyright (c) 2021 Red Hat GmbH
# Author: Stefano Brivio <sbrivio@redhat.com>
set PIDFILE __STATEDIR__/passt.pid
htools qemu-img virt-edit guestfish head sed cat kill qemu-system-x86_64 qemu-system-aarch64 xzcat tr
# Quick pasta test: send message from init to ns, and from ns to init
def distro_quick_pasta_test
host (socat -u TCP6-LISTEN:10000 OPEN:/tmp/init_msg,create,trunc; echo "from_init" | socat -u STDIN TCP6:[::1]:9999) &
hostb ./pasta
sleep 1
host PS1='$ '
host socat -u TCP6-LISTEN:9999 OPEN:/tmp/ns_msg,create,trunc &
sleep 2
host echo "from_ns" | socat -u STDIN TCP6:[::1]:10000
sleep 2
host echo
sleep 1
hout NS_MSG cat /tmp/ns_msg
check [ __NS_MSG__ = "from_init" ]
hostb exit
host echo
hout INIT_MSG cat /tmp/init_msg
check [ __INIT_MSG__ = "from_ns" ]
endef
# Start passt, set common variables
hostb ./passt -P __PIDFILE__ &
sleep 1
host echo
hout DNS6 sed -n 's/^nameserver \([^:]*:\)\([^%]*\).*/\1\2/p' /etc/resolv.conf | head -1
hout GUEST_FILES ls -1 *.c *.h *.sh passt.1 qrap.1 Makefile README.md | tr '\n' ' '; echo
test OpenSUSE Leap 15.1
set IMG __STATEDIR__/opensuse-15.1-x86_64.img
host qemu-img create -f qcow2 -F qcow2 -b __BASEPATH__/openSUSE-Leap-15.1-JeOS.x86_64-kvm-and-xen.qcow2 __IMG__
host guestfish --rw -a __IMG__ -i rm '/usr/lib/systemd/system/systemd-journald.service'
host guestfish --rw -a __IMG__ -i rm /etc/systemd/system/default.target.wants/jeos-firstboot.service
host virt-edit -a __IMG__ /etc/systemd/system/getty.target.wants/getty@tty1.service -e 's/ExecStart=.*/ExecStart=\/sbin\/agetty --timeout 5000 --autologin root -i -8 --keep-baud 115200,38400,9600 ttyS0 $TERM/g'
host guestfish --rw -a __IMG__ -i copy-in __GUEST_FILES__ /root/
host ./qrap 5 qemu-system-x86_64 -M pc,accel=kvm:tcg -m 1024 -nographic -serial stdio -nodefaults -no-reboot -nographic -vga none __IMG__ -net socket,fd=5 -net nic,model=virtio
host PS1='$ '
host ip link set eth0 up
sleep 2
host echo "DNSSERVERS='__DNS6__'" | netconfig modify -s dns_resolver -i eth0
# zypper sometimes segfaults, hence the retries
host for i in $(seq 1 10); do zypper install -y gcc make socat && break; done; echo
host make clean
host CFLAGS="-Werror" make
distro_quick_pasta_test
hint
sleep 1
# PIDFILE is cleaned up when the next test starts, read it now
hout PID cat __PIDFILE__
test OpenSUSE Leap 15.2
set IMG __STATEDIR__/opensuse-15.2-x86_64.img
host qemu-img create -f qcow2 -F qcow2 -b __BASEPATH__/openSUSE-Leap-15.2-JeOS.x86_64-kvm-and-xen.qcow2 __IMG__
host guestfish --rw -a __IMG__ -i rm '/usr/lib/systemd/system/systemd-journald.service'
host guestfish --rw -a __IMG__ -i rm /etc/systemd/system/default.target.wants/jeos-firstboot.service
host virt-edit -a __IMG__ /etc/systemd/system/getty.target.wants/getty@tty1.service -e 's/ExecStart=.*/ExecStart=\/sbin\/agetty --timeout 5000 --autologin root -i -8 --keep-baud 115200,38400,9600 ttyS0 $TERM/g'
host guestfish --rw -a __IMG__ -i copy-in __GUEST_FILES__ /root/
host ./qrap 5 qemu-system-x86_64 -M pc,accel=kvm:tcg -m 1024 -nographic -serial stdio -nodefaults -no-reboot -nographic -vga none __IMG__ -net socket,fd=5 -net nic,model=virtio
host PS1='$ '
host ip link set eth0 up
sleep 2
host echo "DNSSERVERS='__DNS6__'" | netconfig modify -s dns_resolver -i eth0
# zypper sometimes segfaults, hence the retries
host for i in $(seq 1 10); do zypper install -y gcc make socat && break; done; echo
host make clean
host CFLAGS="-Werror" make
distro_quick_pasta_test
hint
sleep 1
test OpenSUSE Leap 15.3
set IMG __STATEDIR__/opensuse-15.3-x86_64.img
host qemu-img create -f qcow2 -F qcow2 -b __BASEPATH__/openSUSE-Leap-15.3-JeOS.x86_64-kvm-and-xen.qcow2 __IMG__
host guestfish --rw -a __IMG__ -i rm '/usr/lib/systemd/system/systemd-journald.service'
host guestfish --rw -a __IMG__ -i rm /etc/systemd/system/default.target.wants/jeos-firstboot.service
host virt-edit -a __IMG__ /etc/systemd/system/getty.target.wants/getty@tty1.service -e 's/ExecStart=.*/ExecStart=\/sbin\/agetty --timeout 5000 --autologin root -i -8 --keep-baud 115200,38400,9600 ttyS0 $TERM/g'
host guestfish --rw -a __IMG__ -i copy-in __GUEST_FILES__ /root/
host ./qrap 5 qemu-system-x86_64 -M pc,accel=kvm:tcg -m 1024 -nographic -serial stdio -nodefaults -no-reboot -nographic -vga none __IMG__ -net socket,fd=5 -net nic,model=virtio
# Multiple prompt logins might come up here
sleep 10
host PS1='$ '
host ip link set eth0 up
sleep 2
host echo "DNSSERVERS='__DNS6__'" | netconfig modify -s dns_resolver -i eth0
# zypper sometimes segfaults, hence the retries
host for i in $(seq 1 10); do zypper install -y gcc make socat && break; done; echo
host make clean
host CFLAGS="-Werror" make
distro_quick_pasta_test
hint
sleep 1
test OpenSUSE Tumbleweed aarch64
set IMG __STATEDIR__/opensuse-tumbleweed-aarch64.img
host xzcat __BASEPATH__/openSUSE-Tumbleweed-ARM-JeOS-efi.aarch64.raw.xz > __IMG__
host virt-edit -a __IMG__ -m /dev/sda3 /usr/lib/systemd/system/serial-getty@.service -e 's/ExecStart=.*/ExecStart=\/sbin\/agetty --timeout 5000 --autologin root -i -8 --keep-baud 115200,38400,9600 %I $TERM/g'
host guestfish --rw -a __IMG__ -i copy-in __GUEST_FILES__ /root/
host ./qrap 5 qemu-system-aarch64 -m 2048 -cpu cortex-a57 -smp 2 -M virt -bios __BASEPATH__/QEMU_EFI.fd -nodefaults -nographic -vga none -serial stdio __IMG__ -net socket,fd=5 -net nic,model=virtio
host PS1='$ '
host ip link set enp0s1 up
sleep 10
host echo "DNSSERVERS='__DNS6__'" | netconfig modify -s dns_resolver -i enp0s1
sleep 10
# No segfaults ever seen with this
host zypper install -y gcc make socat; echo
host make clean
host CFLAGS="-Werror" make
distro_quick_pasta_test
hint
sleep 1
test OpenSUSE Tumbleweed armv7l
set IMG __STATEDIR__/opensuse-tumbleweed-armv7l.img
set ZIMAGE __STATEDIR__/opensuse-tumbleweed-armv7l.zimage
set INITRD __STATEDIR__/opensuse-tumbleweed-armv7l.initrd
host xzcat __BASEPATH__/openSUSE-Tumbleweed-ARM-JeOS-efi.armv7l.raw.xz > __IMG__
host guestfish -a __IMG__ -i download /boot/zImage __ZIMAGE__
host guestfish -a __IMG__ -i download /boot/initrd __INITRD__
host virt-edit -a __IMG__ -m /dev/sda3 /usr/lib/systemd/system/serial-getty@.service -e 's/ExecStart=.*/ExecStart=\/sbin\/agetty --timeout 5000 --autologin root -i -8 --keep-baud 115200,38400,9600 %I $TERM/g'
host guestfish --rw -a __IMG__ -i copy-in __GUEST_FILES__ /root/
host ./qrap 5 qemu-system-arm -M virt -m 1024 -nographic -serial stdio -nodefaults -no-reboot -nographic -vga none -kernel __ZIMAGE__ -initrd __INITRD__ -append 'root=/dev/sda3' -drive if=none,file=__IMG__,format=raw,id=hd,media=disk -device virtio-scsi-device -device scsi-hd,drive=hd -netdev socket,fd=5,id=passt -device virtio-net-device,netdev=passt
host PS1='$ '
host ip link set eth0 up
sleep 10
host echo "DNSSERVERS='__DNS6__'" | netconfig modify -s dns_resolver -i eth0
sleep 10
host zypper install -y gcc make socat; echo
host make clean
host CFLAGS="-Werror" make
distro_quick_pasta_test
hint
sleep 1
test OpenSUSE Tumbleweed
set IMG __STATEDIR__/opensuse-tumbleweed-x86_64.img
host qemu-img create -f qcow2 -F qcow2 -b __BASEPATH__/openSUSE-Tumbleweed-JeOS.x86_64-kvm-and-xen.qcow2 __IMG__
host guestfish --rw -a __IMG__ -i rm /usr/lib/systemd/system/systemd-journald.service
host guestfish --rw -a __IMG__ -i rm /etc/systemd/system/default.target.wants/jeos-firstboot.service
host guestfish --rw -a __IMG__ -i rm /usr/lib/systemd/system/serial-getty@.service
host virt-edit -a __IMG__ /etc/systemd/system/getty.target.wants/getty@tty1.service -e 's/ExecStart=.*/ExecStart=\/sbin\/agetty --timeout 5000 --autologin root -i -8 --keep-baud 115200,38400,9600 ttyS0 $TERM/g'
host guestfish --rw -a __IMG__ -i copy-in __GUEST_FILES__ /root/
host ./qrap 5 qemu-system-x86_64 -M pc,accel=kvm:tcg -m 1024 -nographic -serial stdio -nodefaults -no-reboot -nographic -vga none __IMG__ -net socket,fd=5 -net nic,model=virtio
host PS1='$ '
host ip link set ens2 up
sleep 2
host echo "DNSSERVERS='__DNS6__'" | netconfig modify -s dns_resolver -i ens2
# zypper sometimes segfaults, hence the retries
host for i in $(seq 1 10); do zypper install -y gcc make socat && break; done; echo
host make clean
host CFLAGS="-Werror" make
distro_quick_pasta_test
hint
sleep 1
host kill __PID__