External/passt
1
0
Fork 0
mirror of https://passt.top/passt synced 2024-07-04 08:52:40 +00:00
Code Issues Packages Projects Releases Wiki Activity
6caf9e368e
passt/test/perf/passt_udp
David Gibson a832a44e67 tests: Explicitly list test files in test/run, remove "onlyfor" support 
Currently test/run uses wildcards to run all of the tests in a directory.
However, that wildcard list is filtered down by the "onlyfor" directives
in the test files... usually to a single file.

Therefore, just explicitly list the files we *really* want to run for this
test mode.  This makes it easier to see at the top level what tests will
be executed, and to change that list temporarily while debugging specific
failures.

This means the "onlyfor" directive no longer has any purpose, and we can
remove it.  "onlyfor" was also the only used of the $MODE variable, so we
can remove that too.

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2022-07-14 01:32:42 +02:00

198 lines
6.0 KiB
Plaintext
Raw Blame History

# SPDX-License-Identifier: AGPL-3.0-or-later
#
# PASST - Plug A Simple Socket Transport
# for qemu/UNIX domain socket mode
#
# PASTA - Pack A Subtle Tap Abstraction
# for network namespace/tap device mode
#
# test/perf/passt_udp - Check UDP performance in passt mode
#
# Copyright (c) 2021 Red Hat GmbH
# Author: Stefano Brivio <sbrivio@redhat.com>
gtools sysctl ip jq nproc sleep iperf3 udp_rr # From neper
nstools ip jq sleep iperf3 udp_rr
htools bc head sed
# In this setup, virtio_net TX queue sometimes hangs, still under investigation
def virtio_net_workaround
guest modprobe -r virtio_net; modprobe virtio_net napi_tx=1; ip link set dev eth0 up; dhclient -4; dhclient -6; sleep 3
endef
test passt: throughput and latency
guest /sbin/sysctl -w net.core.rmem_max=16777216
guest /sbin/sysctl -w net.core.wmem_max=16777216
guest /sbin/sysctl -w net.core.rmem_default=16777216
guest /sbin/sysctl -w net.core.wmem_default=16777216
gout GW ip -j -4 route show|jq -rM '.[] | select(.dst == "default").gateway'
gout GW6 ip -j -6 route show|jq -rM '.[] | select(.dst == "default").gateway'
gout IFNAME ip -j link show | jq -rM '.[] | select(.link_type == "ether").ifname'
hout FREQ_PROCFS (echo "scale=1"; sed -n 's/cpu MHz.*: \([0-9]*\)\..*$/(\1+10^2\/2)\/10^3/p' /proc/cpuinfo) | bc -l | head -n1
hout FREQ_CPUFREQ (echo "scale=1"; printf '( %i + 10^5 / 2 ) / 10^6\n' $(cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq) ) | bc -l
hout FREQ [ -n "__FREQ_CPUFREQ__" ] && echo __FREQ_CPUFREQ__ || echo __FREQ_PROCFS__
set THREADS 4
set STREAMS 1
set OPTS -u -i1 -t30 -P __STREAMS__ --pacing-timer 1000
info Throughput in Gbps, latency in µs, __THREADS__ threads at __FREQ__ GHz, one stream each
report passt udp __THREADS__ __FREQ__
th MTU 256B 576B 1280B 1500B 9000B 65520B
tr UDP throughput over IPv6: guest to host
bw -
bw -
virtio_net_workaround
guest ip link set dev __IFNAME__ mtu 1280
iperf3c guest __GW6__%__IFNAME__ 100${i}2 __THREADS__ __OPTS__ -b 2G
iperf3s BW ns 100${i}2 __THREADS__
bw __BW__ 0.8 1.2
virtio_net_workaround
guest ip link set dev __IFNAME__ mtu 1500
iperf3c guest __GW6__%__IFNAME__ 100${i}2 __THREADS__ __OPTS__ -b 3G
iperf3s BW ns 100${i}2 __THREADS__
bw __BW__ 1.0 1.5
virtio_net_workaround
guest ip link set dev __IFNAME__ mtu 9000
iperf3c guest __GW6__%__IFNAME__ 100${i}2 __THREADS__ __OPTS__ -b 5G
iperf3s BW ns 100${i}2 __THREADS__
bw __BW__ 4.0 5.0
virtio_net_workaround
guest ip link set dev __IFNAME__ mtu 65520
iperf3c guest __GW6__%__IFNAME__ 100${i}2 __THREADS__ __OPTS__ -b 7G
iperf3s BW ns 100${i}2 __THREADS__
bw __BW__ 4.0 5.0
tl UDP RR latency over IPv6: guest to host
lat -
lat -
lat -
lat -
lat -
nsb udp_rr --nolog -6
gout LAT udp_rr --nolog -6 -c -H __GW6__%__IFNAME__ | sed -n 's/^throughput=\(.*\)/\1/p'
lat __LAT__ 200 150
tr UDP throughput over IPv4: guest to host
virtio_net_workaround
guest ip link set dev __IFNAME__ mtu 256
iperf3c guest __GW__ 100${i}2 __THREADS__ __OPTS__ -b 500M
iperf3s BW ns 100${i}2 __THREADS__
bw __BW__ 0.0 0.0
virtio_net_workaround
guest ip link set dev __IFNAME__ mtu 576
iperf3c guest __GW__ 100${i}2 __THREADS__ __OPTS__ -b 1G
iperf3s BW ns 100${i}2 __THREADS__
bw __BW__ 0.4 0.6
virtio_net_workaround
guest ip link set dev __IFNAME__ mtu 1280
iperf3c guest __GW__ 100${i}2 __THREADS__ __OPTS__ -b 2G
iperf3s BW ns 100${i}2 __THREADS__
bw __BW__ 0.8 1.2
virtio_net_workaround
guest ip link set dev __IFNAME__ mtu 1500
iperf3c guest __GW__ 100${i}2 __THREADS__ __OPTS__ -b 3G
iperf3s BW ns 100${i}2 __THREADS__
bw __BW__ 1.0 1.5
virtio_net_workaround
guest ip link set dev __IFNAME__ mtu 9000
iperf3c guest __GW__ 100${i}2 __THREADS__ __OPTS__ -b 6G
iperf3s BW ns 100${i}2 __THREADS__
bw __BW__ 4.0 5.0
virtio_net_workaround
guest ip link set dev __IFNAME__ mtu 65520
iperf3c guest __GW__ 100${i}2 __THREADS__ __OPTS__ -b 7G
iperf3s BW ns 100${i}2 __THREADS__
bw __BW__ 4.0 5.0
tl UDP RR latency over IPv4: guest to host
lat -
lat -
lat -
lat -
lat -
nsb udp_rr --nolog -4
gout LAT udp_rr --nolog -4 -c -H __GW__ | sed -n 's/^throughput=\(.*\)/\1/p'
lat __LAT__ 200 150
tr UDP throughput over IPv6: host to guest
bw -
bw -
ns ip link set dev lo mtu 1280
iperf3c ns ::1 100${i}1 __THREADS__ __OPTS__ -b 2G
iperf3s BW guest 100${i}1 __THREADS__
bw __BW__ 0.8 1.2
ns ip link set dev lo mtu 1500
iperf3c ns ::1 100${i}1 __THREADS__ __OPTS__ -b 2G
iperf3s BW guest 100${i}1 __THREADS__
bw __BW__ 1.0 1.5
ns ip link set dev lo mtu 9000
iperf3c ns ::1 100${i}1 __THREADS__ __OPTS__ -b 3G
iperf3s BW guest 100${i}1 __THREADS__
bw __BW__ 3.0 4.0
ns ip link set dev lo mtu 65520
iperf3c ns ::1 100${i}1 __THREADS__ __OPTS__ -b 3G
iperf3s BW guest 100${i}1 __THREADS__
bw __BW__ 3.0 4.0
tl UDP RR latency over IPv6: host to guest
lat -
lat -
lat -
lat -
lat -
guestb udp_rr --nolog -P 10001 -C 10011 -6
nsout LAT udp_rr --nolog -P 10001 -C 10011 -6 -c -H ::1 | sed -n 's/^throughput=\(.*\)/\1/p'
lat __LAT__ 200 150
ns ip link set dev lo mtu 65535
tr UDP throughput over IPv4: host to guest
ns ip link set dev lo mtu 256
iperf3c ns 127.0.0.1 100${i}1 __THREADS__ __OPTS__ -b 1G
iperf3s BW guest 100${i}1 __THREADS__
bw __BW__ 0.0 0.0
ns ip link set dev lo mtu 576
iperf3c ns 127.0.0.1 100${i}1 __THREADS__ __OPTS__ -b 1G
iperf3s BW guest 100${i}1 __THREADS__
bw __BW__ 0.4 0.6
ns ip link set dev lo mtu 1280
ns ip addr add ::1 dev lo
iperf3c ns 127.0.0.1 100${i}1 __THREADS__ __OPTS__ -b 3G
iperf3s BW guest 100${i}1 __THREADS__
bw __BW__ 0.8 1.2
ns ip link set dev lo mtu 1500
iperf3c ns 127.0.0.1 100${i}1 __THREADS__ __OPTS__ -b 3G
iperf3s BW guest 100${i}1 __THREADS__
bw __BW__ 1.0 1.5
ns ip link set dev lo mtu 9000
iperf3c ns 127.0.0.1 100${i}1 __THREADS__ __OPTS__ -b 3G
iperf3s BW guest 100${i}1 __THREADS__
bw __BW__ 3.0 4.0
ns ip link set dev lo mtu 65520
iperf3c ns 127.0.0.1 100${i}1 __THREADS__ __OPTS__ -b 3G
iperf3s BW guest 100${i}1 __THREADS__
bw __BW__ 3.0 4.0
tl UDP RR latency over IPv4: host to guest
lat -
lat -
lat -
lat -
lat -
guestb udp_rr --nolog -P 10001 -C 10011 -4
nsout LAT udp_rr --nolog -P 10001 -C 10011 -4 -c -H 127.0.0.1 | sed -n 's/^throughput=\(.*\)/\1/p'
lat __LAT__ 200 150
ns ip link set dev lo mtu 65535
te
Reference in New Issue View Git Blame Copy Permalink