1
0
mirror of https://passt.top/passt synced 2024-09-18 21:50:57 +00:00
passt/flow.h
David Gibson 8012f5ff55 flow: Common address information for initiating side
Handling of each protocol needs some degree of tracking of the
addresses and ports at the end of each connection or flow.  Sometimes
that's explicit (as in the guest visible addresses for TCP
connections), sometimes implicit (the bound and connected addresses of
sockets).

To allow more consistent handling across protocols we want to
uniformly track the address and port at each end of the connection.
Furthermore, because we allow port remapping, and we sometimes need to
apply NAT, the addresses and ports can be different as seen by the
guest/namespace and as by the host.

Introduce 'struct flowside' to keep track of address and port
information related to one side of a flow. Store two of these in the
common fields of a flow to track that information for both sides.

For now we only populate the initiating side, requiring that
information be completed when a flows enter INI.  Later patches will
populate the target side.

For now this leaves some information redundantly recorded in both generic
and type specific fields.  We'll fix that in later patches.

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2024-07-19 18:32:32 +02:00

237 lines
7.7 KiB
C

/* SPDX-License-Identifier: GPL-2.0-or-later
* Copyright Red Hat
* Author: David Gibson <david@gibson.dropbear.id.au>
*
* Tracking for logical "flows" of packets.
*/
#ifndef FLOW_H
#define FLOW_H
#define FLOW_TIMER_INTERVAL 1000 /* ms */
/**
* enum flow_state - States of a flow table entry
*
* An individual flow table entry moves through these states, usually in this
* order.
* General rules:
* - Code outside flow.c should never write common fields of union flow.
* - The state field may always be read.
*
* FREE - Part of the general pool of free flow table entries
* Operations:
* - flow_alloc() finds an entry and moves it to NEW
*
* NEW - Freshly allocated, uninitialised entry
* Operations:
* - flow_alloc_cancel() returns the entry to FREE
* - flow_initiate() sets the entry's INISIDE details and moves to
* INI
* - FLOW_SET_TYPE() sets the entry's type and moves to TYPED
* Caveats:
* - No fields other than state may be accessed
* - At most one entry may be NEW, INI, TGT or TYPED at a time, so
* it's unsafe to use flow_alloc() again until this entry moves to
* ACTIVE or FREE
* - You may not return to the main epoll loop while any flow is NEW
*
* INI - An entry with INISIDE common information completed
* Operations:
* - Common fields related to INISIDE may be read
* - flow_alloc_cancel() returns the entry to FREE
* - flow_target() sets the entry's TGTSIDE details and moves to TGT
* Caveats:
* - Other common fields may not be read
* - Type specific fields may not be read or written
* - At most one entry may be NEW, INI, TGT or TYPED at a time, so
* it's unsafe to use flow_alloc() again until this entry moves to
* ACTIVE or FREE
* - You may not return to the main epoll loop while any flow is INI
*
* TGT - An entry with only INISIDE and TGTSIDE common information completed
* Operations:
* - Common fields related to INISIDE & TGTSIDE may be read
* - flow_alloc_cancel() returns the entry to FREE
* - FLOW_SET_TYPE() sets the entry's type and moves to TYPED
* Caveats:
* - Other common fields may not be read
* - Type specific fields may not be read or written
* - At most one entry may be NEW, INI, TGT or TYPED at a time, so
* it's unsafe to use flow_alloc() again until this entry moves to
* ACTIVE or FREE
* - You may not return to the main epoll loop while any flow is TGT
*
* TYPED - Generic info initialised, type specific initialisation underway
* Operations:
* - All common fields may be read
* - Type specific fields may be read and written
* - flow_alloc_cancel() returns the entry to FREE
* - FLOW_ACTIVATE() moves the entry to ACTIVE
* Caveats:
* - At most one entry may be NEW, INI, TGT or TYPED at a time, so
* it's unsafe to use flow_alloc() again until this entry moves to
* ACTIVE or FREE
* - You may not return to the main epoll loop while any flow is
* TYPED
*
* ACTIVE - An active, fully-initialised flow entry
* Operations:
* - All common fields may be read
* - Type specific fields may be read and written
* - Flow returns to FREE when it expires, signalled by returning
* 'true' from flow type specific deferred or timer handler
* Caveats:
* - flow_alloc_cancel() may not be called on it
*/
enum flow_state {
FLOW_STATE_FREE,
FLOW_STATE_NEW,
FLOW_STATE_INI,
FLOW_STATE_TGT,
FLOW_STATE_TYPED,
FLOW_STATE_ACTIVE,
FLOW_NUM_STATES,
};
#define FLOW_STATE_BITS 8
static_assert(FLOW_NUM_STATES <= (1 << FLOW_STATE_BITS),
"Too many flow states for FLOW_STATE_BITS");
extern const char *flow_state_str[];
#define FLOW_STATE(f) \
((f)->state < FLOW_NUM_STATES ? flow_state_str[(f)->state] : "?")
/**
* enum flow_type - Different types of packet flows we track
*/
enum flow_type {
/* Represents an invalid or unused flow */
FLOW_TYPE_NONE = 0,
/* A TCP connection between a socket and tap interface */
FLOW_TCP,
/* A TCP connection between a host socket and ns socket */
FLOW_TCP_SPLICE,
/* ICMP echo requests from guest to host and matching replies back */
FLOW_PING4,
/* ICMPv6 echo requests from guest to host and matching replies back */
FLOW_PING6,
FLOW_NUM_TYPES,
};
#define FLOW_TYPE_BITS 8
static_assert(FLOW_NUM_TYPES <= (1 << FLOW_TYPE_BITS),
"Too many flow types for FLOW_TYPE_BITS");
extern const char *flow_type_str[];
#define FLOW_TYPE(f) \
((f)->type < FLOW_NUM_TYPES ? flow_type_str[(f)->type] : "?")
extern const uint8_t flow_proto[];
#define FLOW_PROTO(f) \
((f)->type < FLOW_NUM_TYPES ? flow_proto[(f)->type] : 0)
#define SIDES 2
#define INISIDE 0 /* Initiating side index */
#define TGTSIDE 1 /* Target side index */
/**
* struct flowside - Address information for one side of a flow
* @eaddr: Endpoint address (remote address from passt's PoV)
* @faddr: Forwarding address (local address from passt's PoV)
* @eport: Endpoint port
* @fport: Forwarding port
*/
struct flowside {
union inany_addr faddr;
union inany_addr eaddr;
in_port_t fport;
in_port_t eport;
};
/**
* struct flow_common - Common fields for packet flows
* @state: State of the flow table entry
* @type: Type of packet flow
* @pif[]: Interface for each side of the flow
* @side[]: Information for each side of the flow
*/
struct flow_common {
#ifdef __GNUC__
enum flow_state state:FLOW_STATE_BITS;
enum flow_type type:FLOW_TYPE_BITS;
#else
uint8_t state;
static_assert(sizeof(uint8_t) * 8 >= FLOW_STATE_BITS,
"Not enough bits for state field");
uint8_t type;
static_assert(sizeof(uint8_t) * 8 >= FLOW_TYPE_BITS,
"Not enough bits for type field");
#endif
uint8_t pif[SIDES];
struct flowside side[SIDES];
};
#define FLOW_INDEX_BITS 17 /* 128k - 1 */
#define FLOW_MAX MAX_FROM_BITS(FLOW_INDEX_BITS)
#define FLOW_TABLE_PRESSURE 30 /* % of FLOW_MAX */
#define FLOW_FILE_PRESSURE 30 /* % of c->nofile */
/**
* struct flow_sidx - ID for one side of a specific flow
* @sidei: Index of side referenced (0 or 1)
* @flowi: Index of flow referenced
*/
typedef struct flow_sidx {
unsigned sidei :1;
unsigned flowi :FLOW_INDEX_BITS;
} flow_sidx_t;
static_assert(sizeof(flow_sidx_t) <= sizeof(uint32_t),
"flow_sidx_t must fit within 32 bits");
#define FLOW_SIDX_NONE ((flow_sidx_t){ .flowi = FLOW_MAX })
/**
* flow_sidx_valid() - Test if a sidx is valid
* @sidx: sidx value
*
* Return: true if @sidx refers to a valid flow & side
*/
static inline bool flow_sidx_valid(flow_sidx_t sidx)
{
return sidx.flowi < FLOW_MAX;
}
/**
* flow_sidx_eq() - Test if two sidx values are equal
* @a, @b: sidx values
*
* Return: true iff @a and @b refer to the same side of the same flow
*/
static inline bool flow_sidx_eq(flow_sidx_t a, flow_sidx_t b)
{
return (a.flowi == b.flowi) && (a.sidei == b.sidei);
}
union flow;
void flow_init(void);
void flow_defer_handler(const struct ctx *c, const struct timespec *now);
void flow_log_(const struct flow_common *f, int pri, const char *fmt, ...)
__attribute__((format(printf, 3, 4)));
#define flow_log(f_, pri, ...) flow_log_(&(f_)->f, (pri), __VA_ARGS__)
#define flow_dbg(f, ...) flow_log((f), LOG_DEBUG, __VA_ARGS__)
#define flow_err(f, ...) flow_log((f), LOG_ERR, __VA_ARGS__)
#define flow_trace(f, ...) \
do { \
if (log_trace) \
flow_dbg((f), __VA_ARGS__); \
} while (0)
#endif /* FLOW_H */