This patch adds a separate function to perform common numa checks, so
that we can reuse this function in other tests, e.g. the test for
live-migration with numa.
Signed-off-by: Bo Chen <chen.bo@intel.com>
This test exercises the local live-migration between two Cloud
Hypervisor VMs on the same host. It ensures the following behaviors:
1. The source VM is up and functional (including various virtio-devices
are working properly);
2. The 'send-migration' and 'receive-migration' command finished
successfully;
3. The source VM terminated gracefully after live migration;
4. The destination VM is functional (including various virtio-devices
are working properly) after live migration.
Note: This test does not use vsock as we can't create two identical
vsock on the same host.
Fixes: #2965
Signed-off-by: Bo Chen <chen.bo@intel.com>
This patch adds a dedicate function to include the common checks on the
virtio-devices from the 'test_snapshot_restore' test, which will also be
reused for the upcoming 'test_live_migration' test.
Signed-off-by: Bo Chen <chen.bo@intel.com>
Two tests for booting Linux cloud image from the different VHDx files:
fixed and dynamic. Another test for testing the dynamic expansion of a
generated VHDx file.
Signed-off-by: Fazla Mehrab <akm.fazla.mehrab@intel.com>
This commit adds an AArch64-only integration test case called
`test_guest_numa_nodes_dt` so that it is possible to test the
NUMA for the FDT on AArch64 platform.
Signed-off-by: Henry Wang <Henry.Wang@arm.com>
AArch64 CPU topology can be described using either device tree or
ACPI. Therefore, the integration test should also cover the AArch64
ACPI CPU topology tests.
Signed-off-by: Henry Wang <Henry.Wang@arm.com>
Now that vhost-user supports being snapshot and restored, we extend the
existing test_ovs_dpdk to validate snapshot/restore feature works as
expected.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
The existing test_macvtap is factorized to be able to support both
coldplug and hotplug of a macvtap interface through virtio-net. Adding
the new test_macvtap_hotplug test allows for validating that sending a
TAP file descriptor through control message along with the add-net
command works.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
To help with readability, we rely on exec_host_command_status() from the
macvtap test, which replaces the former "bash -c ..." syntax.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
In order to uniquely identify each SGX EPC section, we introduce a
mandatory option `id` to the `--sgx-epc` parameter.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
The output from getty ("login:") does not always appear. This can be
observed interactively when booting the VM. (Mashing return will bring
it up.) Instead of checking for that string to ensure the VM has booted
instead check for a message from systemd to say it has started the SSH
daemon.
Fixes: #2799
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
AArch64 tests were divided into 2 steps:
- Build and test with 'acpi' feature
- Build and test without 'acpi'
This can be optimized. We need only to build and test once with default
features ('acpi' is enabled).
On AArch64, ACPI only works with UEFI. If UEFI is not available, guest
kernel fall back to use FDT. Most AArch64 test cases boot from direct
kernel, the guest will keep using FDT even if ACPI is enabled. So
nothing is broken.
Signed-off-by: Michael Zhao <michael.zhao@arm.com>
Issue from beta verion of clippy:
Error: --> vm-virtio/src/queue.rs:700:59
|
700 | if let Some(used_event) = self.get_used_event(&mem) {
| ^^^^ help: change this to: `mem`
|
= note: `-D clippy::needless-borrow` implied by `-D warnings`
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#needless_borrow
Signed-off-by: Bo Chen <chen.bo@intel.com>
The virtio_balloon test is a bit flaky since we can't really know how
much the balloon is gonna be deflated when the guest is under memory
pressure. That's why it's safer to simply check that the balloon is not
the initial size anymore.
One small detail, but we don't need to check for the balloon size to be
higher than 0 since the returned value is a u64.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Additionally, he disk creation routine is extended to support NTFS and
variable image size.
Signed-off-by: Anatol Belski <anbelski@linux.microsoft.com>
In order to allow a hotplugged vCPU to be assigned to the correct NUMA
node in the guest, the DSDT table must expose the _PXM method for each
vCPU. This method defines the proximity domain to which each vCPU should
be attached to.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
The new test_virtio_balloon() is to verify if the 'deflate_on_oom'
parameter works. Its testing result is as follows:
1. Start a 4G guest with 2G balloon, check memory once starts up.
total_mem is 4294967296 bytes
actual_mem is 2147483648 bytes
orig_balloon is 2147483648 bytes
total used free shared buff/cache available
Mem: 3.8Gi 2.1Gi 1.6Gi 0.0Ki 140Mi 1.6Gi
Swap: 0B 0B 0B
2. Run a command in guest to eat up 25G memory, and check again.
total_mem is 4294967296 bytes
actual_mem is 3121610752 bytes
deflated_balloon is 1173356544 bytes
total used free shared buff/cache available
Mem: 3.8Gi 1.2Gi 2.6Gi 0.0Ki 49Mi 2.5Gi
Swap: 0B 0B 0B
From above, we can notice the balloon memory indeed deflates from
2147483648 bytes to 1173356544 bytes once an oom is going to be
triggered.
Signed-off-by: Fei Li <lifei.shirley@bytedance.com>
A new method has been introduced for WindowsGuest, that would poll on
the SSH connection and try to execute a test command. When successfull,
the polling stops and the guest is considered finished boot. The
downside of this method is that the network setup is needed always even
if the test doesn't use network, however it complies with the behavior
of other tests. I also observe a bit more stability on the local test
run, however it still appears to be a resource issue so some sporadic
fails are possible on a slower machine.
The hardcoded timeouts for guest boot and DHCP setup have been removed.
The dnsmasq invocation uses `--bind-dynamic` so then the daemon can be
started while the target interface could be down yet.
Signed-off-by: Anatol Belski <anbelski@linux.microsoft.com>
Co-authored-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
test_aarch64_pe_boot was added at the very beginning of AArch64 support.
Now it can be combined to test_vmlinux_boot.
Renamed test_vmlinux_boot to test_direct_kernel_boot for generality.
Signed-off-by: Michael Zhao <michael.zhao@arm.com>
Enabled test case test_vmlinux_boot_noacpi on AArch64 and renamed it
test_direct_kernel_boot_noacpi for generality.
Signed-off-by: Michael Zhao <michael.zhao@arm.com>
Some new integration tests will require the "stress" binary to be
present in the guest in order to run correctly.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Re-enable virtiofsd testing now that issues with capstone repository
have been resolved.
This reverts commit a14c70019a.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
This new function allows for better readability of the code by
factorizing a few of lines of code into a single one.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
It's important to verify the actual exit code returned from the new
function exec_host_command_status() to ensure the command ran
successfully.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
This new function allows for better readability of the code by
factorizing a bunch of lines of code into a single one.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
There's no need for ssh_command_ok() anymore since ssh_command() now
returns an error in case the executed command returned with an exit code
different than 0.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Make sure the reconnection functionaliity is well tested from the OVS
DPDK integration test.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
In order to simplify and speed up the OVS DPDK test, we switch from
using 'iperf3' to 'netcat' to validate the connectivity is functional.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Since OVS DPDK deprecated the use for the server mode, let's make sure
the integration test uses the client mode instead. This means the OVS
backend is the client and the VMM acts as the server, therefore the
reason why we use "vhost_mode=server".
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Re-enable the OVS DPDK integration test by assigning both VMs to the
NUMA node 0. This ensures the processes are being run on NUMA node 0,
preventing OVS DPDK from abnormal functioning.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
The CI is failing due the git server that the submodules required for
this fork of QEMU need to build from is unavailable.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
(cherry picked from commit 2aec0a92a5)
In order to avoid regression regarding OVS-DPDK support, a new
integration test is added. This test consists of running two VMs, both
attached to a distinct OVS port, where both ports are connected to an
OVS bridge. Once the VM are running, the test validates the connection
between the two VMs works correctly.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
