The information about the identifier related to a Snapshot is only
relevant from the BTreeMap perspective, which is why we can get rid of
the duplicated identifier in every Snapshot structure.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
The snapshot and restore of AArch64 Gic was done in Vm. Now it is moved
to DeviceManager.
The benefit is that the restore can be done while the Gic is created in
DeviceManager.
While the moving of state data from Vm snapshot to DeviceManager
snapshot breaks the compatability of migration from older versions.
Signed-off-by: Michael Zhao <michael.zhao@arm.com>
Moving the Ioapic object to the new restore design, meaning the Ioapic
is created directly with the right state, and it shares the same
codepath as when it's created from scratch.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
In the new process, `device::Gic::new()` covers additional actions:
1. Creating `hypervisor::vGic`
2. Initializing interrupt routings
The change makes the vGic device ready in the beginning of
`DeviceManager::create_devices()`. This can unblock the GIC related
devices initialization in the `DeviceManager`.
Signed-off-by: Michael Zhao <michael.zhao@arm.com>
This device emulates a tpm device in cloud-hypervisor. Read and write support
to miminal set of control registers is supported.
Non-control commands will be processed as reads and write to
CRB_DATA_BUFFER. Reads and Writes to this data buffer are forwarded to
swtpm via the configured data_fd.
Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com>
Co-authored-by: Sean Yoo <t-seanyoo@microsoft.com>
This simplifes the buld and checks with very little overhead and the
fwdebug device is I/O port device on 0x402 that can be used by edk2 as a
very simple character device.
See: #4679
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
This makes it consistent with x86_64 and allows the performance metrics
tooling to continue to work on aarch64.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Rather than overloading the GED device with the detection of what the
underlying event means move that to a new generic event controller. The
advantage of this is that that the generic event controller can have a
_CRS that covers the memory for the OperationRegion (the ged driver
rejects _CRS entries that contain anything beyond the single interrupt)
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Use VgicConfig to initialize Vgic.
Use Gic::create_default_config everywhere so we don't always recompute
redist/msi registers.
Add a helper create_test_vgic_config for tests in hypervisor crate.
Signed-off-by: Nuno Das Neves <nudasnev@microsoft.com>
VgicConfig structure will be used for initializing the Vgic.
Gic::create_default_config will be used everywhere we currently compute
redist/msi registers.
Signed-off-by: Nuno Das Neves <nudasnev@microsoft.com>
Combined the `GicDevice` struct in `arch` crate and the `Gic` struct in
`devices` crate.
After moving the KVM specific code for GIC in `arch`, a very thin wapper
layer `GicDevice` was left in `arch` crate. It is easy to combine it
with the `Gic` in `devices` crate.
Signed-off-by: Michael Zhao <michael.zhao@arm.com>
This allows the capturing of the debug port event without requiring more
verbose logging which itself has a performance impact.
Unless users are using our custom kernel or their own custom patches
they are unlikely to see the impact.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
This is a cleaner approach to handling the I/O port write to 0x80.
Whilst doing this also use generate the timestamp at the start of the VM
creation. For consistency use the same timestamp for the ARM equivalent.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
The calls to these functions are always preceded by a call to
InterruptSourceGroup::update(). By adding a masked boolean to that
function call it possible to remove 50% of the calls to the
KVM_SET_GSI_ROUTING ioctl as the the update will correctly handle the
masked or unmasked case.
This causes the ioctl to disappear from the perf report for a boot of
the VM.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
If EFI reset fails on the Linux kernel then it will fallthrough to CMOS
reset. Implement this as one of our reset solutions.
Fixes: #3912
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Compile this feature in by default as it's well supported on both
aarch64 and x86_64 and we only officially support using it (no non-acpi
binaries are available.)
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
To emulate debug I/O port on arm64, we need trap from guest to VMM.
Generally, there are 3 ways to go:
1) execute a privilege intruction like "wfi";
2) access a system register;
3) access device MMIO region;
However, 1) and 2) often handled in kvm, thus 3) it's the choice.
There maybe lots of repeated work and enlarge the size of clh to develop
a new device, so it's better to reuse the current device. Luckily, I
find that pl011 is the eariest device initialized in kernel and, there
is reserved region in it which we can reuse for emulating debug I/O.
Signed-off-by: Jianyong Wu <jianyong.wu@arm.com>
error: unneeded late initalization
Error: --> devices/src/legacy/rtc_pl031.rs:294:9
|
294 | let v;
| ^^^^^^
|
= note: `-D clippy::needless-late-init` implied by `-D warnings`
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#needless_late_init
help: declare `v` here
|
297 | let v = if (AMBA_ID_LOW..AMBA_ID_HIGH).contains(&offset) {
| +++++++
help: remove the assignments from the branches
|
299 ~ u32::from(PL031_ID[index])
300 | } else {
301 ~ match offset {
302 | RTCDR => self.get_time(),
303 | RTCMR => {
304 | // Even though we are not implementing RTC alarm we return the last value
...
help: add a semicolon after the `if` expression
|
317 | };
| +
error: unneeded late initalization
Error: --> devices/src/legacy/uart_pl011.rs:297:9
|
297 | let v;
| ^^^^^^
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#needless_late_init
help: declare `v` here
|
299 | let v = if (AMBA_ID_LOW..AMBA_ID_HIGH).contains(&(offset >> 2)) {
| +++++++
help: remove the assignments from the branches
|
301 ~ u32::from(PL011_ID[index])
302 | } else {
303 ~ match offset >> 2 {
304 | UARTDR => {
305 | let c: u32;
306 | let r: u32;
...
help: add a semicolon after the `if` expression
|
340 | };
| +
error: unneeded late initalization
Error: --> devices/src/legacy/uart_pl011.rs:305:21
|
305 | let c: u32;
| ^^^^^^^^^^^
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#needless_late_init
help: declare `c` here
|
309 | let c: u32 = self.read_fifo.pop_front().unwrap_or_default().into();
| ~~~~~~~~~~
error: unneeded late initalization
Error: --> devices/src/legacy/uart_pl011.rs:306:21
|
306 | let r: u32;
| ^^^^^^^^^^^
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#needless_late_init
help: declare `r` here
|
320 | let r: u32 = c;
| ~~~~~~~~~~
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
The register D has only one bit that is not reserved, and its purpose is
to report if the RTC/CMOS device is powered or not.
The OVMF firmware was failing to boot as it was getting the information
that the device was powered off from the register D.
The simple way to fix this issue is by always returning the bit 7 from
register D as 1, indicating the device is always powered.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
For the bus scanning the GED AML code now calls into a PSCN method that
scans all buses. This approach was chosen since it handles the case
correctly where one GED interrupt is services for two hotplugs on
distinct segments.
The PCIU and PCID field values are now determined by the PSEG field that
is uses to select which segment those values should be used for.
Similarly _EJ0 will notify based on the value of _SEG.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
In preparation for reorganizing how the serial output is constructed
add methods to the serial devices for setting the out buffer after the
device is created.
Also add a method to enable flushing the output buffer to be used to
write the buffer to the PTY fd once the PTY is writable.
Signed-off-by: William Douglas <william.douglas@intel.com>
Validate the size of I/O reads and check that no request is made to an
out of bounds index (which would cause a panic.)
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Check the size of data buffer for reading on the ApciPmTimer device to
avoid a potential panic if the guest uses non-DWORD access.
Simplify the zeroring of the buffer for AcpiShutdownDevice.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
These statements are useful for understanding the cause of reset or
shutdown of the VM and are not spammy so should be included at info!()
level.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
The type is to change from 32-bit to 64-bit. See
https://github.com/rust-lang/libc/issues/1848.
The change is announced via a deprecation warning. Cloud Hypervisor's
code does not need changing. Simply suppress these warnings.
Signed-off-by: Wei Liu <liuwe@microsoft.com>
With the new beta version, clippy complains about redundant allocation
when using Arc<Box<dyn T>>, and suggests replacing it simply with
Arc<dyn T>.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Issue from beta verion of clippy:
Error: --> vm-virtio/src/queue.rs:700:59
|
700 | if let Some(used_event) = self.get_used_event(&mem) {
| ^^^^ help: change this to: `mem`
|
= note: `-D clippy::needless-borrow` implied by `-D warnings`
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#needless_borrow
Signed-off-by: Bo Chen <chen.bo@intel.com>
