The current code was always considering 0xffffffff being written to the
register as a sign it was expecting to get the size, hence the BAR
reprogramming detection was stating this case was not a reprogramming
case.
Problem is, if the value 0xffffffff is directed at a 64bits BAR, this
might be the high or low part of a 64bits address which is meant to be
the new address of the BAR, which means we would miss the detection of
the BAR being reprogrammed here.
This commit improves the code using finer granularity checks in order to
detect this corner case correctly.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
The expansion ROM BAR reprogramming was being triggered for the wrong
reason and was causing the following error to be reported:
ERROR:pci/src/bus.rs:207 -- Failed moving device BAR: failed allocating
new 32 bits MMIO range
Following the PCI specification, here is what is defined:
Device independent configuration software can determine how much address
space the device requires by writing a value of all 1's to the address
portion of the register and then reading the value back.
This means we cannot expect 0xffffffff to be written, as the address
portion corresponds to the bits 31-11. That's why whenever the size of
this special BAR is being asked for, the value being written is
0xfffff800.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
The way the code is currently implemented, only by writing to STDIN a
user can trigger some input to reach the VM through virtio-console. But
in case, there were not enough virtio descriptors to process what was
retrieved from STDIN, the remaining bits would be transferred only if
STDIN was triggered again. The missing part is that when some
descriptors are made available from the guest, the virtio-console device
should try to send any possible remaining bits.
By triggering the function process_input_queue() whenever the guest
notifies the host that some new descriptors are ready for the receive
queue, this patch allows to fill the implementation void that was left.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
In case the virtio descriptor is pulled out of the Queue iterator, it
is important to fill it and tag it as used. This is already done from
the successful code path, but in case there's an error during the
filling, we should make sure to put the descriptor back in the list of
available descriptors. This way, when the error occurs, we don't loose
a descriptor, and it could be used later.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
The existing code was a bit too complex and it was introducing a bug
when trying to paste long lines directly to the console. By simplifying
the code, and by doing proper usage of the drain() function, the bug is
fixed by this commit.
Here is the similar output one could have gotten from time to time, when
pasting important amounts of bytes:
ERROR:vm-virtio/src/console.rs:104 -- Failed to write slice:
InvalidGuestAddress(GuestAddress(1040617472))
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
The cache= option from the virtiofsd backend is meant to be used
depending on how the user wants to use the guest page cache. For most
use cases, we want to bypass the guest page cache to reduce the guest
memory footprint, which is why "cache=none" should be the default.
"cache=always" is the other option when the user wants to do something
specific by using the guest page cache, but should not be the default
anymore.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
The virtio-fs messages coming from the slave can contain multiple
mappings (up to 8) through one single request. By implementing such
feature, the virtio-fs implementation of cloud-hypervisor is optimal and
fully functional as it resolves a bug that was seen when running fio
testing without this patch.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
With latest kernel, virtio-fs mount command has been simplified, and
this needs to be applied everywhere in our tests and documentation.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
By implementing this virtio feature, we let the virtio-iommu driver call
the device backend so that it can probe each device that gets attached.
Through this probing, the device provides a range of reserved memory
related to MSI. This is mandatory for x86 architecture as we want to
avoid the default MSI range assigned by the virtio-iommu driver if no
range is provided at all. The default range is 0x8000000-0x80FFFFF but
it only makes sense for ARM architectures.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Because virtio-iommu is still evolving (as it's only partly upstream),
some pieces like the ACPI declaration of the different nodes and devices
attached to the virtual IOMMU are changing.
This patch introduces a new ACPI table called VIOT, standing as the high
level table overseeing the IORT table and associated subtables.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
In order to validate the newly created virtio-fs-virtio-iommu-5.5-rc1
branch is not breaking anything in our CI, we must try it as a temporary
branch before we can override virtio-fs-virtio-iommu.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Make all the crates members of the workspace so that "cargo test
--workspace" will find them all and test them with the features enabled
that we use.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
If we use the workspace based testing methodology then we start testing
some code inside vhost_rs that is broken.
See #576
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
The following commit broke this unit test:
"""
vmm: Convert virtio devices to Arc<Mutex<T>>
Migratable devices can be virtio or legacy devices.
In any case, they can potentially be tracked through one of the IO bus
as an Arc<Mutex<dyn BusDevice>>. In order for the DeviceManager to also
keep track of such devices as Migratable trait objects, they must be
shared as mutable atomic references, i.e. Arc<Mutex<T>>. That forces all
Migratable objects to be tracked as Arc<Mutex<dyn Migratable>>.
Virtio devices are typically migratable, and thus for them to be
referenced by the DeviceManager, they now should be built as
Arc<Mutex<VirtioDevice>>.
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
"""
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
This allows us to change the memory map that is being used by the
devices via an atomic swap (by replacing the map with another one). The
ArcSwap provides the mechanism for atomically swapping from to another
whilst still giving good read performace. It is inside an Arc so that we
can use a single ArcSwap for all users.
Not covered by this change is replacing the GuestMemoryMmap itself.
This change also removes some vertical whitespace from use blocks in the
files that this commit also changed. Vertical whitespace was being used
inconsistently and broke rustfmt's behaviour of ordering the imports as
it would only do it within the block.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
This function will be useful for other parts of the VMM that also
estabilish their own mappings.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
This removes the need to handle a mutable integer and also centralises
the allocation of these slot numbers.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
The memory manager is responsible for setting up the guest memory and in
the long term will also handle addition of guest memory.
In this commit move code for creating the backing memory and populating
the allocator into the new implementation trying to make as minimal
changes to other code as possible.
Follow on commits will further reduce some of the duplicated code.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Because we don't always reach the expected footprint improvements with
KSM, let's review the numbers. By reducing the expectations and
increasing the amount of pages to scan, this should stabilize the CI.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
To reflect updated clippy rules:
error: `if` chain can be rewritten with `match`
--> vmm/src/device_manager.rs:1508:25
|
1508 | / if ret > 0 {
1509 | | debug!("MSI message successfully delivered");
1510 | | } else if ret == 0 {
1511 | | warn!("failed to deliver MSI message, blocked by guest");
1512 | | }
| |_________________________^
|
= note: `-D clippy::comparison-chain` implied by `-D warnings`
= help: Consider rewriting the `if` chain to use `cmp` and `match`.
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#comparison_chain
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Address updated clippy errors:
error: redundant clone
--> vmm/src/device_manager.rs:699:32
|
699 | .insert(acpi_device.clone(), 0x3c0, 0x4)
| ^^^^^^^^ help: remove this
|
= note: `-D clippy::redundant-clone` implied by `-D warnings`
note: this value is dropped without further use
--> vmm/src/device_manager.rs:699:21
|
699 | .insert(acpi_device.clone(), 0x3c0, 0x4)
| ^^^^^^^^^^^
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#redundant_clone
error: redundant clone
--> vmm/src/device_manager.rs:737:26
|
737 | .insert(i8042.clone(), 0x61, 0x4)
| ^^^^^^^^ help: remove this
|
note: this value is dropped without further use
--> vmm/src/device_manager.rs:737:21
|
737 | .insert(i8042.clone(), 0x61, 0x4)
| ^^^^^
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#redundant_clone
error: redundant clone
--> vmm/src/device_manager.rs:754:29
|
754 | .insert(cmos.clone(), 0x70, 0x2)
| ^^^^^^^^ help: remove this
|
note: this value is dropped without further use
--> vmm/src/device_manager.rs:754:25
|
754 | .insert(cmos.clone(), 0x70, 0x2)
| ^^^^
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#redundant_clone
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
We use the version that's included in the linux-loader crate. This old
version was also generating build errors after updating to the new
clippy:
e.g.:
error: unsafe function's docs miss `# Safety` section
--> arch_gen/src/x86/bootparam.rs:23:5
|
23 | / pub unsafe fn as_ptr(&self) -> *const T {
24 | | ::std::mem::transmute(self)
25 | | }
| |_____^
|
= note: `-D clippy::missing-safety-doc` implied by `-D warnings`
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#missing_safety_doc
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
This patch has been cherry-picked from the Firecracker tree. The
reference commit is 1db04ccc69862f30b7814f30024d112d1b86b80e.
Changed the host-initiated vsock connection protocol to include a
trivial handshake.
The new protocol looks like this:
- [host] CONNECT <port><LF>
- [guest/success] OK <assigned_host_port><LF>
On connection failure, the host host connection is reset without any
accompanying message, as before.
This allows host software to more easily detect connection failures, for
instance when attempting to connect to a guest server that may have not
yet started listening for client connections.
Signed-off-by: Dan Horobeanu <dhr@amazon.com>
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
This patch is to check if block device is readonly
when backend set readonly=true.
The lsblk command can show the RO value in the guest.
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
