When reading from or writing to the MSI-X table, the function provided
by the PCI crate expects the offset to start from the beginning of the
table. That's why it is VFIO specific code to be responsible for
providing the right offset, which means it needs to be the offset
substracted by the beginning of the MSI-X table offset.
This bug was not discovered until we tested VFIO with some device where
the MSI-X table was placed on a BAR at an offset different from 0x0.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
The offsets returned by the table_offset() and pba_offset() function
were wrong as they were shifting the value by 3 bits. The MSI-X spec
defines the MSI-X table and PBA offsets as being defined on 3-31 bits,
but this does not mean it has to be shifted. Instead, the address is
still on 32 bits and assumes the LSB bits 0-2 are set to 0.
VFIO was working fine with devices were the MSI-X offset were 0x0, but
the bug was found on a device where the offset was non-null.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
The existing code taking care of the epoll loop was too restrictive as
it was propagating the error returned from the epoll_wait() syscall, no
matter what was the error. This causes the epoll loop to be broken,
leading to a non-functional virtio device.
This patch enforces the parsing of the returned error and prevent from
the error propagation in case it is EINTR, which stands for Interrupted.
In case the epoll loop is interrupted, it is appropriate to retry.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
The existing code taking care of the epoll loop was too restrictive as
it was propagating the error returned from the epoll_wait() syscall, no
matter what was the error. This causes the epoll loop to be broken,
leading to the VM termination.
This patch enforces the parsing of the returned error and prevent from
the error propagation in case it is EINTR, which stands for Interrupted.
In case the epoll loop is interrupted, it is appropriate to retry.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
In order to fix the clippy error complaining about the number of
arguments passed to a function exceeding the maximum of 7 arguments,
this patch factorizes those parameters into a more global one called
VmInfo.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Since virtio-pmem uses a KVM user memory region, it needs to increment
the slot index in use to prevent from any conflict with further VFIO
allocations (used for mapping mappable memory BARs).
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
In the context of VFIO, we use Vt-d, which means we rely on an IOMMU.
Depending on the IOMMU capability, and in particular if it is not able
to perform SC (Snooping Control), the memory will not be tagged as WB
by KVM, but instead the vCPU will rely on its MTRR/PAT MSRs to find the
appropriate way of interact with specific memory regions.
Because when Vt-d is not involved KVM sets the memory as WB (write-back)
the VMM should set the memory default as WB. That's why this patch sets
the MSR MTRRdefType with the default memory type being WB.
One thing that it is worth noting is that we might have to specifically
create some UC (uncacheable) regions if we see some issues with the
ranges corresponding to the MMIO ranges that should trap.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Introduce a new DiskConfig implementation for Ubuntu Bionic with
different cloud init preparation details and use this when testing with
test_simple_launch.
Adjust the memory expectation for downwards as the EFI boot results in a
slightly different memory map. Also enable serial port as Ubuntu does
not support a virtio-console based boot.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Download Bionic image and convert to raw (the QCOW version of the file
doesn't currently work) for running the integration tests.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Rather than embed the disks in a vector and have integer indicies into
the vector for the different disks instead abstract this through an enum
type used on the DiskConfig trait.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Extract the network configuration into its own struct and also extract
the prepare_files() and prepare_cloudinit() functions into a struct for
the Clear Linux distribution.
This struct is behind a trait that is used by the Guest implementation
to prepare the files.
This will allow a different implementation to be used for the Ubuntu
disk files.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Relying on the newly added code in the pci crate, the vfio crate can now
properly expose an expansion ROM BAR if the device has one.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
The expansion ROM BAR can be considered like a 32-bit memory BAR with a
slight difference regarding the amount of reserved bits at the beginning
of its 32-bit value. Bit 0 indicates if the BAR is enabled or disabled,
while bits 1-10 are reserved. The remaining upper 21 bits hold the BAR
address.
This commit extends the pci crate in order to support expansion ROM BAR.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
In order to support VFIO for devices supporting multiple functions,
we need to mask the multi-function bit (bit 7 from Header Type byte).
Otherwise, the guest kernel ends up tryng to enumerate those devices.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Every PCI device is exposed as a separate device, on a specific PCI
slot, and we explicitely don't support to expose a device as a multi
function device. For this reason, this patch makes sure the enumeration
of the PCI bus will not find some multi function device.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Add cloud-init data for Ubuntu and introduce a convenience script that
can be used to generate cloud-init disk images for manual testing.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
And rename the default user from "admin" to "cloud" as the admin user
clashes with a standard user and group name on Ubuntu.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
As per the VIRTIO specification, every virtio device configuration can
be updated while the guest is running. The guest needs to be notified
when this happens, and it can be done in two different ways, depending
on the type of interrupt being used for those devices.
In case the device uses INTx, the allocated IRQ pin is shared between
queues and configuration updates. The way for the guest to differentiate
between an interrupt meant for a virtqueue or meant for a configuration
update is tied to the value of the ISR status field. This field is a
simple 32 bits bitmask where only bit 0 and 1 can be changed, the rest
is reserved.
In case the device uses MSI/MSI-X, the driver should allocate a
dedicated vector for configuration updates. This case is much simpler as
it only requires the device to send the appropriate MSI vector.
The cloud-hypervisor codebase was not supporting the update of a virtio
device configuration. This patch extends the existing VirtioInterrupt
closure to accept a type that can be Config or Queue, so that based on
this type, the closure implementation can make the right choice about
which interrupt pin or vector to trigger.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
We add a Reserved region type at the end of the memory hole to prevent
32-bit devices allocations to overlap with architectural address ranges
like IOAPIC, TSS or APIC ones.
Eventually we should remove that reserved range by allocating all the
architectural ranges before letting 32-bit devices use the memory hole.
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
We want to be able to differentiate between memory regions that must be
managed separately from the main address space (e.g. the 32-bit memory
hole) and ones that are reserved (i.e. from which we don't want to allow
the VMM to allocate address ranges.
We are going to use a reserved memory region for restricting the 32-bit
memory hole from expanding beyond the IOAPIC and TSS addresses.
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Since our VFIO code does not support pin based interrupt, but only MSI
and MSI-X, it is cleaner to not expose any Interrupt Pin to the guest by
setting its value to 0.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Until the codebase can properly expose the ROM BAR into the guest, it is
better to disable it for now, returning always 0 when the register is
being read.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
The IO BAR alignment was already set to 4 bytes, this patch simply added
a comment for it.
The Memory BAR alignment was also set to the right value, but it was not
explained why 0x1000 was needed, and also why 0x10 could sometimes be
used as correct alignment.
A Memory BAR must be aligned at least on 16 bytes since the first 4 bits
are dedicated to some specific information about the BAR itself. But in
case a BAR is identified as mappable from VFIO, this means our VMM might
memory map it into the VMM address space, and set KVM accordingly using
the ioctl KVM_SET_USER_MEMORY_REGION. In case of KVM, we have to take
into account that it expects addresses to be page aligned, which means
4K in this case.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
In order to correctly support multiple VFIO devices, we need to
increment the memory slot index every time it is being used to set some
user memory region through KVM. That's why the mem_slot parameter is
made mutable.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
The memory slot index provided to the DeviceManager was wrong since
only the RAM memory regions are set as user memory regions to KVM.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
KVM does not support multiple KVM VFIO devices to be created when
trying to support multiple VFIO devices. This commit creates one
global KVM VFIO device being shared with every VFIO device, which
makes possible the support for passing several devices through the
VM.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
There is one corner case which was not properly handled by the current
code from our AddressAllocator. If both the address start (from the
next range) and the requested region size are already aligned on the
same value as "alignment", when doing the substract of the requested
size + alignment, the returned address is already aligned. The problem
is that we might end up overlapping with an existing range since the
check between the available delta and the requested size does not take
into account a full extra alignment.
By substracting the requested size + alignment - 1 from the address
start of the next range, we ensure this kind of corner case would not
happen since the address won't be naturally aligned and after some
adjustment from the function align_address(), the correct start address
will be returned.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
The check performed on the end address was wrong since the end address
was actually the address right after the end. To get the right end
address, we need to add (region size - 1) to the start address.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
The newer kernel is resulting in entropy being slightly lower than
previously. Adjust the expected entropy downwards.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
This should reduce the integration testing time considerably. When a
custom kernel is no longer required we can pull kernel from tarball
again.
Fixes: #100
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
The VFIO integration test first boots a QEMU guest and then assigns the
QEMU virtio-pci networking device into a nested cloud-hypervisor guest.
We then check that we can ssh into the nested guest and verify that it's
running with the right kernel command line.
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
With the VFIO crate, we can now support directly assigned PCI devices
into cloud-hypervisor guests.
We support assigning multiple host devices, through the --device command
line parameter. This parameter takes the host device sysfs path.
Fixes: #60
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
VFIO explictly tells us if a MMIO region can be mapped into the guest
address space or not. Except for MSI-X table BARs, we try to map them
into the guest whenever VFIO allows us to do so. This avoids unnecessary
VM exits when the guest tries to access those regions.
Signed-off-by: Zhang, Xiong Y <xiong.y.zhang@intel.com>
Signed-off-by: Chao Peng <chao.p.peng@linux.intel.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
We track all MSI and MSI-X capabilities changes, which allows us to also
track all MSI and MSI-X table changes.
With both pieces of information we can build kvm irq routing tables and
map the physical device MSI/X vectors to the guest ones. Once that
mapping is in place we can toggle the VFIO IRQ API accordingly and
enable disable MSI or MSI-X interrupts, from the physical device up to
the guest.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
In order to properly manage the VFIO device interrupt settings, we need
to keep track of both MSI and MSI-X PCI config capabilities changes.
When the guest programs the device for interrupt delivery, it writes to
the MSI and MSI-X capabilities. This information must be trapped and
cached in order to map the physical device interrupt delivery path to
the guest one. In other words, tracking MSI and MSI-X capabilites will
allow us to accurately build the KVM interrupt routes.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
This brings the initial PCI support to the VFIO crate.
The VfioPciDevice is the main structure and holds an inner VfioDevice.
VfioPciDevice implements the PCI trait, leaving the IRQ assignments
empty as this will be driven by both the guest and the VFIO PCI device,
not by the VMM.
As we must trap BAR programming from the guest (We don't want to program
the actual device with guest addresses), we use our local PCI
configuration cache to read and write BARs.
Signed-off-by: Zhang, Xiong Y <xiong.y.zhang@intel.com>
Signed-off-by: Chao Peng <chao.p.peng@linux.intel.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
The Virtual Function I/O (VFIO) kernel subsystem exposes a vast and
relatively complex userspace API. This commit abstracts and simplifies
this API into both an internal and external API.
The external API is to be consumed by VFIO device implementation through
the VfioDevice structure. A VfioDevice instance can:
- Enable and disable all interrupts (INTX, MSI and MSI-X) on the
underlying VFIO device.
- Read and write all of the VFIO device memory regions.
- Set the system's IOMMU tables for the underlying device.
Signed-off-by: Zhang, Xiong Y <xiong.y.zhang@intel.com>
Signed-off-by: Chao Peng <chao.p.peng@linux.intel.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Our DeviceManager::new() routine is reaching north of 250 lines.
For simplicity and readbility sake, extract all virtio devices creation
code into their own routines.
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Two integration tests are added for testing the implemented virtio
console device for single port operation. One checks the presence
and the simple stdout operation. The other test checks the stdout
on file (option: file) using virtio console.
Signed-off-by: A K M Fazla Mehrab <fazla.mehrab.akm@intel.com>
To use the implemented virtio console device, the users can select one
of the three options ("off", "tty" or "file=/path/to/the/file") with
the command line argument "--console". By default, the console is
enabled as a device named "hvc0" (option: tty). When "off" option is
used, the console device is not added to the VM configuration at all.
Signed-off-by: A K M Fazla Mehrab <fazla.mehrab.akm@intel.com>
