This does the same thing as df2a7c17 ("vmm: Ignore and warn TAP FDs
sent via the HTTP request body"), but for the vm.create endpoint,
which also previously would accept file descriptors in the body, and
try to use whatever fd occupied that number as a TAP device.
Signed-off-by: Alyssa Ross <hi@alyssa.is>
Port of df2a7c17 ("vmm: Ignore and warn TAP FDs sent via the HTTP
request body"), but for the vm.create endpoint, which would previously
accept file descriptors in the body, and try to use whatever fd
occupied that number as a TAP device.
Since I had to move the wrapping of the net config in an Arc until
after it was modified, I made the same change to all other endpoints,
so the style stays consistent.
Signed-off-by: Alyssa Ross <hi@alyssa.is>
This commit renames `ram_region_sub_size` to `ram_region_available_size`
and make its value align down to the default page size or hugepage
size of the current memory zone, which can prevent the memory zone from
being split into misaligned parts. And if the available size of ram
region is zero, this region will be marked as consumed even it has
unused space.
Note that there is two methods to use hugepages.
1. Specify `hugepages` for `memory` or `memory-zone`, if the
`hugepage_size` is not specified, the value can be got by `statfs`
for `/dev/hugepages`.
2. Specify a `file` in hugetlbfs for `memory-zone`, the hugepage size
can also be got by `statfs` for the file.
The value for alignment will be the hugepage size if this memory zone
is using hugepages, otherwise the value will be default page size of
system.
Fixes: #5463
Signed-off-by: Yu Li <liyu.yukiteru@bytedance.com>
The previous `arch_memory_regions` function will provide some memory
regions with the specified memory size and fill all the previous
regions before using the next one, but sometimes there may be no need
to fill up the previous one, e.g., the previous one should be aligned
with hugepage size.
This commit make `arch_memory_regions` function not take any
parameters and return the max available regions, the memory manager
can use them on demand.
Fixes: #5463
Signed-off-by: Yu Li <liyu.yukiteru@bytedance.com>
SerialBuffer uses VecDeque::extend, which calls realloc, which a
maximum buffer size of 1 MiB. Starting at allocation sizes of
128 KiB, musl's mallocng allocator will use mremap for the allocation.
Since this was not permitted by the seccomp rules, heavy write load
could crash cloud-hypervisor with a seccomp failure. (Encountered
using virtio-console, but I don't see any reason it wouldn't happen
for the legacy serial device too.)
Signed-off-by: Alyssa Ross <hi@alyssa.is>
Bump to the latest rust-vmm crates, including vm-memory, vfio,
vfio-bindings, vfio-user, virtio-bindings, virtio-queue, linux-loader,
vhost, and vhost-user-backend,
Signed-off-by: Bo Chen <chen.bo@intel.com>
Introduces three new CLI options, `dbus-service-name`,
`dbus-object-path` and `dbus-system-bus` to configure the DBus API.
Signed-off-by: Omer Faruk Bayram <omer.faruk@sartura.hr>
This commit applies the previously created seccomp filter
to the `DbusApi` thread.
Also encloses the main loop of the `DBusApi` thread using
`std::panic::catch_unwind` and `AssertUnwindSafe` in order to mirror
the behavior of the HTTP API.
Signed-off-by: Omer Faruk Bayram <omer.faruk@sartura.hr>
This commit adds support for graceful shutdown of the DBusApi thread
using `futures::channel::oneshot` channels. By using oneshot channels,
we ensure that the thread has enough time to send a response to the
`VmmShutdown` method call before it is terminated. Without this step,
the thread may be terminated before it can send a response, resulting
in an error message on the client side stating that the message
recipient disconnected from the message bus without providing a reply.
Also changes the default values for DBus service name, object path
and interface name.
Signed-off-by: Omer Faruk Bayram <omer.faruk@sartura.hr>
This commit introduces three new dependencies: `zbus`, `futures`
and `blocking`. `blocking` is used to call the Internal API in zbus'
async context which is driven by `futures::executor`. They are all
behind the `dbus_api` feature flag.
The D-Bus API implementation is behind the same `dbus_api` feature
flag as well.
Signed-off-by: Omer Faruk Bayram <omer.faruk@sartura.hr>
The refactoring on deferring address space allocation (#5169) broke TDX,
as TDX initialization needs to access guest memory for encryption and
measurement of guest pages.
Signed-off-by: Bo Chen <chen.bo@intel.com>
The current implementation of breadth first traversal for device tree
uses a temporary vector, therefore causes unnecessary memory copy.
Remove it and do it within vector nodes.
Signed-off-by: Hao Xu <howeyxu@tencent.com>
Unlike KVM, there's no internal handling for topoolgy under MSHV. Thus,
if no topology has been passed during the CH launch, use the boot CPUs
count to construct the topology struct.
Signed-off-by: Anatol Belski <anbelski@linux.microsoft.com>
Originally the AML only accepted one hex number for PCI segment
numbering. Change it to accept two numbers. That makes it possible to
add up to 256 PCI segments.
Signed-off-by: Wei Liu <liuwe@microsoft.com>
When I refactored this to centralise resetting the tty into
DeviceManager::drop, I tested that the tty was reset if an error
happened on the vmm thread, but not on the main thread. It turns out
that if an error happened on the main thread, the process would just
exit, so drop handlers on other threads wouldn't get run.
To fix this, I've changed start_vmm() to write to the VMM's exit
eventfd and then join the thread if an error happens after the vmm
thread is started.
Fixes: b6feae0a ("vmm: only touch the tty flags if it's being used")
Signed-off-by: Alyssa Ross <hi@alyssa.is>
Previously, we used two different functions for configuring ttys.
vmm_sys_util::terminal::Terminal::set_raw_mode() was used to configure
stdio ttys, and cfmakeraw() was used to configure ptys created by
cloud-hypervisor. When I centralized the stdio tty cleanup, I also
switched to using cfmakeraw() everywhere, to avoid duplication.
cfmakeraw sets the OPOST flag, but when we later reset the ttys, we
used vmm_sys_util::terminal::Terminal::set_canon_mode(), which does
not unset this flag. This meant that the terminal was getting mostly,
but not fully, reset.
To fix this without depending on the implementation of cfmakeraw(),
let's just store the original termios for stdio terminals, and restore
them to exactly the state we found them in when cloud-hypervisor exits.
Fixes: b6feae0a ("vmm: only touch the tty flags if it's being used")
Signed-off-by: Alyssa Ross <hi@alyssa.is>
In particular the Std::write() API requires that the value implements
AsBytes and copies the slice representation into the table data. This
avoids unaligned writes which can cause a panic with the updated
toolchain.
Signed-off-by: Rob Bradford <rbradford@rivosinc.com>
For structures that are used in SDT ACPI tables it is necessary for them
to implement this trait for the newly safe Std::write() API.
Signed-off-by: Rob Bradford <rbradford@rivosinc.com>
This is used on older kernels where close_range() is not available.
Signed-off-by: Alyssa Ross <hi@alyssa.is>
Fixes: 505f4dfa ("vmm: close all unused fds in sigwinch listener")
On KVM this is provided by an ioctl, on MSHV this is constant. Although
there is a HV_MAXIMUM_PROCESSORS constant the MSHV ioctl API is limited
to u8.
Signed-off-by: Rob Bradford <rbradford@rivosinc.com>
The custom 'clone' duplicates 'preserved_fds' so that the validation
logic can be safely carried out on the clone of the VmConfig.
The custom 'drop' ensures 'preserved_fds' are safely closed when the
holding VmConfig instance is destroyed.
Signed-off-by: Bo Chen <chen.bo@intel.com>
Preserved FDs are the ones that share the same life-time as its holding
VmConfig instance, such as FDs for creating TAP devices.
Preserved FDs will stay open as long as the holding VmConfig instance is
valid, and will be closed when the holding VmConfig instance is destroyed.
Signed-off-by: Bo Chen <chen.bo@intel.com>
