Instead of defining some very generic resources as PioAddressRange or
MmioAddressRange for each PCI BAR, let's move to the new Resource type
PciBar in order to make things clearer. This allows the code for being
more readable, but also removes the need for hard assumptions about the
MMIO and PIO ranges. PioAddressRange and MmioAddressRange types can be
used to describe everything except PCI BARs. BARs are very special as
they can be relocated and have special information we want to carry
along with them.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
In order to make the code more consistent and easier to read, we remove
the former tuple that was used to describe a BAR, replacing it with the
existing structure PciBarConfiguration.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
By adding a new method id() to the PciDevice trait, we allow the caller
to retrieve a unique identifier. This is used in the context of BAR
relocation to identify the device being relocated, so that we can update
the DeviceTree resources for all PCI devices (and not only
VirtioPciDevice).
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Updating the way of restoring BAR addresses for virtio-pci by providing
a more generic approach that will be reused for other PciDevice
implementations (i.e VfioPcidevice and VfioUserPciDevice).
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Since each segment must have a non-overlapping memory range associated
with it the device memory must be equally divided amongst all segments.
A new allocator is used for each segment to ensure that BARs are
allocated from the correct address ranges. This requires changes to
PciDevice::allocate/free_bars to take that allocator and when
reallocating BARs the correct allocator must be identified from the
ranges.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
We need to be able to return the barrier from the code that prepares to
activate the virtio device. This triggered by a write to the
configuration fields stored in the PCI BAR. Since bars can be accessed
by both memory mapping and through PCI config I/O several prototypes
must be changed.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
This removes the dependency of the pci crate on the devices crate which
now only contains the device implementations themselves.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
The point of this new method is to let the caller decide when the
implementation of the PciDevice should free the BARs previously
allocated through the other method allocate_bars().
This provides a way to perform proper cleanup for any PCI device.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
In order to anticipate the need to support more features related to the
access of a device's PCI config space, this commits changes the self
reference in the function read_config_register() to be mutable.
This also brings some more flexibility for any implementation of the
PciDevice trait.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Both InterruptDelivery and InterruptParameters can be removed from the
pci crate as they are not used anymore.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
There's no need for assign_irq() or assign_msix() functions from the
PciDevice trait, as we can see it's never used anywhere in the codebase.
That's why it's better to remove these methods from the trait, and
slightly adapt the existing code.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Callbacks are not the most Rust idiomatic way of programming. The right
way is to use a Trait to provide multiple implementation of the same
interface.
Additionally, a Trait will allow for multiple functions to be defined
while using callbacks means that a new callback must be introduced for
each new function we want to add.
For these two reasons, the current commit modifies the existing
VirtioInterrupt callback into a Trait of the same name.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
The PciDevice trait is supposed to describe only functions related to
PCI. The specific method ioeventfds() has nothing to do with PCI, but
instead would be more specific to virtio transport devices.
This commit removes the ioeventfds() method from the PciDevice trait,
adding some convenient helper as_any() to retrieve the Any trait from
the structure behing the PciDevice trait. This is the only way to keep
calling into ioeventfds() function from VirtioPciDevice, so that we can
still properly reprogram the PCI BAR.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Based on the value being written to the BAR, the implementation can
now detect if the BAR is being moved to another address. If that is the
case, it invokes move_bar() function from the DeviceRelocation trait.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
In order to support PCI BAR reprogramming, the PciDevice trait defines a
new method move_bar() dedicated for taking appropriate action when a BAR
is moved to a different guest address.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
This new trait will allow the VMM to implement the mechanism following a
BAR modification regarding its location in the guest address space.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Latest clippy version complains about our existing code for the
following reasons:
- trait objects without an explicit `dyn` are deprecated
- `...` range patterns are deprecated
- lint `clippy::const_static_lifetime` has been renamed to
`clippy::redundant_static_lifetimes`
- unnecessary `unsafe` block
- unneeded return statement
All these issues have been fixed through this patch, and rustfmt has
been run to cleanup potential formatting errors due to those changes.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
The structure of the vmm-sys-util crate has changed with lots of code
moving to submodules.
This change adjusts the use of the imported structs to reference the
submodules.
Fixes: #145
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
This patch adds the support for both IO and Memory BARs by expecting
the function allocate_bars() to identify the type of each BAR.
Based on the type, register_mapping() insert the address range on the
appropriate bus (PIO or MMIO).
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
PciConfigIo is a legacy pci bus dispatcher, which manages all pci
devices including a pci root bridge. However, it is unnecessary to
design a complex hierarchy which redirects every access by PciRoot.
Since pci root bridge is also a pci device instance, and only contains
easy config space read/write, and PciConfigIo actually acts as a pci bus
to dispatch resource based resolving when VMExit, we re-arrange to make
the pci hierarchy clean.
Signed-off-by: Jing Liu <jing2.liu@linux.intel.com>
When reading from or writing to a PCI BAR to handle a VM exit, we need
to have the BAR address itself to be able to support multiple BARs PCI
devices.
Fixes: #87
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
BusDevice includes two methods which are only for PCI devices, which should
be as members of PciDevice trait for a better clean high level APIs.
Signed-off-by: Jing Liu <jing2.liu@linux.intel.com>
As mentioned in the PCI specification, the Function Mask from the
Message Control Register can be set to prevent a device from injecting
MSI-X messages. This supersedes the vector masking as it interacts at
the device level.
Here quoted from the specification:
For MSI and MSI-X, while a vector is masked, the function is prohibited
from sending the associated message, and the function must set the
associated Pending bit whenever the function would otherwise send the
message. When software unmasks a vector whose associated Pending bit is
set, the function must schedule sending the associated message, and
clear the Pending bit as soon as the message has been sent. Note that
clearing the MSI-X Function Mask bit may result in many messages
needing to be sent.
This commit implements the behavior described above by reorganizing
the way the PCI configuration space is being written. It is indeed
important to be able to catch a change in the Message Control
Register without having to implement it for every PciDevice
implementation. Instead, the PciConfiguration has been modified to
take care of handling any update made to this register.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
The current MSI-X implementation completely ignores the values found
in the Vector Control register related to a specific vector, and never
updates the Pending Bit Array.
According to the PCI specification, MSI-X vectors can be masked
through the Vector Control register on bit 0. If this bit is set,
the device should not inject any MSI message. When the device
runs into such situation, it must not inject the interrupt, but
instead it must update the bit corresponding to the vector number
in the Pending Bit Array.
Later on, if/when the Vector Control register is updated, and if
the bit 0 is flipped from 0 to 1, the device must look into the PBA
to find out if there was a pending interrupt for this specific
vector. If that's the case, an MSI message is injected and the
bit from the PBA is cleared.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
In order to factorize the complexity brought by closures, this commit
merges IrqClosure and MsixClosure into a generic InterruptDelivery one.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
In order to allow virtio-pci devices to use MSI-X messages instead
of legacy pin based interrupts, this patch implements the MSI-X
support for cloud-hypervisor. The VMM code and virtio-pci bits have
been modified based on the "msix" module previously added to the pci
crate.
Fixes#12
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Because we cannot always assume the irq fd will be the way to send
an IRQ to the guest, this means we cannot make the assumption that
every virtio device implementation should expect an EventFd to
trigger an IRQ.
This commit organizes the code related to virtio devices so that it
now expects a Rust closure instead of a known EventFd. This lets the
caller decide what should be done whenever a device needs to trigger
an interrupt to the guest.
The closure will allow for other type of interrupt mechanism such as
MSI to be implemented. From the device perspective, it could be a
pin based interrupt or an MSI, it does not matter since the device
will simply call into the provided callback, passing the appropriate
Queue as a reference. This design keeps the device model generic.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Add the BSD and Apache license.
Make all crosvm references point to the BSD license.
Add the right copyrights and identifier to our VMM code.
Add Intel copyright to the vm-virtio and pci crates.
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
After the virtio-blk device support has been introduced in the
previous commit, the vmm need to rely on this new device to boot
from disk images instead of initrd built into the kernel.
In order to achieve the proper support of virtio-blk, this commit
had to handle a few things:
- Register an ioevent fd for each virtqueue. This important to be
notified from the virtio driver that something has been written
on the queue.
- Fix the retrieval of 64bits BAR address. This is needed to provide
the right address which need to be registered as the notification
address from the virtio driver.
- Fix the write_bar and read_bar functions. They were both assuming
to be provided with an address, from which they were trying to
find the associated offset. But the reality is that the offset is
directly provided by the Bus layer.
- Register a new virtio-blk device as a virtio-pci device from the
vm.rs code. When the VM is started, it expects a block device to
be created, using this block device as the VM rootfs.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
This crate is based on the crosvm devices/src/pci implementation from 107edb3e
We introduced a few changes:
- This one is a standalone crate. The device crate does not carry any
PCI specific bits.
- Simplified PCI root configuration. We only carry a pointer to a
PciConfiguration, not a wrapper around it.
- Simplified BAR allocation API. All BARs from the PciDevice instance
must be generated at once through the PciDevice.allocate_bars()
method.
- The PCI BARs are added to the MMIO bus from the PciRoot add_device()
method.
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
