Creating a dedicated Result type for VirtioPciDevice, associated with
the new VirtioPciDeviceError enum. This allows for a clearer handling of
the errors generated through VirtioPciDevice::new().
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
The code for restoring a VirtioPciDevice has been updated, including the
dependencies VirtioPciCommonConfig, MsixConfig and PciConfiguration.
It's important to note that both PciConfiguration and MsixConfig still
have restore() implementations because Vfio and VfioUser devices still
rely on the old way for restore.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
TEST=Boot `--disk readonly=on` along with a guest that tries to write
(unmodified hypervisor-fw) and observe that the virtio device thread no
longer panics.
Fixes: #4888
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
It's perfectly reasonable to expect if that some virtio threads trigger
libc behaviour that needs mprotect() that all virtio threads would do
the same.
Fixes: #4874
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
It is required to close all file descriptors pointing to an opened TAP
device prior to reopening the TAP device; otherwise it will return
-EBUSY as the device can only be opened once (excluding MQ use cases.)
When rebooting the VM the virtio-net threads would still be running and
so the TAP file descriptor may not have been closed. To ensure that the
TAP FD is closed wait for all the epoll threads to exit after receiving the
KILL_EVENT.
Fixes: #4868
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
An integer overflow from our virtio-mem device can be triggered
from (misbehaved) guest driver with malicious requests. This patch
handles this integer overflow explicitly and treats it as an invalid
request.
Note: this bug was detected by our virtio-mem fuzzer through 'oss-fuzz'.
Signed-off-by: Bo Chen <chen.bo@intel.com>
To support all virtio-devices, this patch replaces the customized
EpollHelper::run` with customized `EpollHelper::run_with_timeout` for
fuzzing.
Signed-off-by: Bo Chen <chen.bo@intel.com>
Since the processing of the console inputs was moved from the VMM thread
to the virtio-console thread (#3061), we have been using the 'FILE_EVENT'
to handle input from stdin/pty/file, which made 'INPUT_EVENT' obsoleted.
Signed-off-by: Bo Chen <chen.bo@intel.com>
Following the new design proposal to improve the restore codepath when
migrating a VM, all virtio devices are supplied with an optional state
they can use to restore from. The restore() implementation every device
was providing has been removed in order to prevent from going through
the restoration twice.
Here is the list of devices now following the new restore design:
- Block (virtio-block)
- Net (virtio-net)
- Rng (virtio-rng)
- Fs (vhost-user-fs)
- Blk (vhost-user-block)
- Net (vhost-user-net)
- Pmem (virtio-pmem)
- Vsock (virtio-vsock)
- Mem (virtio-mem)
- Balloon (virtio-balloon)
- Watchdog (virtio-watchdog)
- Vdpa (vDPA)
- Console (virtio-console)
- Iommu (virtio-iommu)
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Considering error messages will be mostly nested, ensuring no
punctuation at the end will make the error log more readable.
Signed-off-by: Bo Chen <chen.bo@intel.com>
With known number of queues and queue events, we can make each of them
more explicit and avoid using vector/direct indexing, which is cleaner
and slightly more efficient.
Signed-off-by: Bo Chen <chen.bo@intel.com>
The the number of queues and associated events is known and fixed. We
can define and use each of them explicitly and avoid using vector (and
hence direct indexing), which is cleaner and slightly more efficient.
Signed-off-by: Bo Chen <chen.bo@intel.com>
The the number of queues and associated events is known and fixed. We
can define and use each of them explicitly and avoid using vector (and
hence direct indexing), which is cleaner and slightly more efficient.
Also, this refactoring makes it clearer that we are not handling "event
queue" events (as "_event_queue" is not being used intentionally).
Signed-off-by: Bo Chen <chen.bo@intel.com>
In this way, the virtio-iommu code can properly report an error when
a wrong number of queues is provided, instead of triggering an
out-of-bound error.
Signed-off-by: Bo Chen <chen.bo@intel.com>
Vdpa now implements the Migratable trait, which allows the device to be
added to the DeviceTree and therefore allows live migrating any vDPA
device that supports being suspended.
Given a vDPA device can't be resumed from a suspended state without
having to reset everything, we don't support pause/resume for a vDPA
device, as well as snapshot/restore (which requires resume to be
supported).
In order for the migration to work locally, reusing the same device on
the same host machine, the vhost-vdpa handler is dropped after the
snapshot has been performed, which allows the destination VM to open the
device without any conflict about the device being busy.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
In order to anticipate for migration support, we need to be able to
create a Vdpa object without VhostKernVdpa object associated with it.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
When restoring a VM, the BAR type can be found directly from the
snapshot resources. It is more reliable than the previous method which
was using self.use_64bit_bar from VirtioPciDevice because at the time
the BARs are allocated, the VirtioDevice hasn't been restored yet,
meaning the way to determine the value of use_64bit_bar is wrong for a
device like vDPA. At this time, the device type is not known and relying
on the stored resources is the only reliable way.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
The RNG device never reads from the guest memory it reads from a file
and writes to the guest memory.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Don't silently ignore the descriptors provided by the guest. This is
consistent with other devices.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
With the virtio-rng device the descriptors that are provided by the
guest must be writable and of non-zero length. Also propagate an error
if writing to the guest memory fails.
Signed-off-by: Bo Chen <chen.bo@intel.com>
Adjust MTU logic such that:
1. Apply an MTU to the TAP interface if the user supplies it
2. Always query the TAP interface for the MTU and expose that.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
This function is for really for the transport layer to trigger a device
reset. Instead name it appropriately for the fuzzing specific use case.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Add a new "mtu" parameter to the NetConfig structure and therefore to
the --net option. This allows Cloud Hypervisor's users to define the
Maximum Transmission Unit (MTU) they want to use for the network
interface that they create.
In details, there are two main aspects. On the one hand, the TAP
interface is created with the proper MTU if it is provided. And on the
other hand the guest is made aware of the MTU through the VIRTIO
configuration. That means the MTU is properly set on both the TAP on the
host and the network interface in the guest.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
There's no need to delegate the resize operation to the virtio-mem
thread. This can come directly from the vmm thread which will use the
Mem object to update the VIRTIO configuration and trigger the interrupt
for the guest to be notified.
In order to achieve what's described above, the VirtioMemZone structure
now has a handle onto the Mem object directly. This avoids the need for
intermediate Resize and ResizeSender structures.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
There's no need to delegate the resize operation to the virtio-balloon
thread. This can come directly from the vmm thread which will use the
Balloon object to update the VIRTIO configuration and trigger the
interrupt for the guest to be notified.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Update the implementation of the process_queue() function to match all
other virtio devices implementations. This solves some issue related to
potential out-of-bound accesses to the former used_desc_heads list.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Multiple rust-vmm crates must be updated at once given the vm-memory one
has been updated and they all rely on vm-memory.
- vm-memory from 0.8.0 to 0.9.0
- vhost from 0.4.0 to 0.5.0
- virtio-queue from 0.5.0 to 0.6.0
- vhost-user-backend from 0.6.0 to 0.7.0
- linux-loader from 0.4.0 to 0.5.0
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
It provides fuzzer a reliable way to wait for a sequence of events
to complete for virtio-devices while not using a fixed timeout to
maintain the full speed of fuzzing.
Take virtio-block as an example, the 'queue event' with a valid
available queue setup can trigger a 'completion event'. This is a
meaningful virtio-block code path of processing guest inputs which is
our target for fuzzing virtio devices.
Signed-off-by: Bo Chen <chen.bo@intel.com>
Through multiple changes, this patch aims at providing a reliable
solution for detecting the state of the PTY's connection. Being able to
find out when the other end of the PTY is connected is essential to
prevent the loss of data being output through the PTY. When the PTY
isn't connected, the output is buffered through the SerialBuffer, the
same solution that was created for the serial port initially.
Fixes#4521
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Extending and improving both the structure and the trait allows for more
flexibility regarding what can be achieved with the epoll loop. It
allows for a timeout to be configured instead of the default blocking
behavior. There is a new method in the trait to notify the caller that
the timeout has been reached. And there's a new knob to be notified with
the full list of events before the internal code will actually loop over
every event.
All of these new features are not affecting the previous behavior, and
using EpollHelper::run() should be unchanged.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Reads from the random file may only be partial, e.g., if the random file is an ordinary text
file. When that happens, the device needs to signal to the driver that only parts of the buffer have
been overwritten.
Signed-off-by: Markus Napierkowski <markus.napierkowski@cyberus-technology.de>
Remove the use of 'unwrap()' that assumes the guest address for request
status is always valid, which avoid virtio-block thread panic on
malformed descriptors from the guest.
Signed-off-by: Bo Chen <chen.bo@intel.com>
