In order to restore devices relying on MSI-X, the MsixConfig structure
must be restored with the correct values. Additionally, the KVM routes
must be restored so that interrupts can be delivered through KVM the way
they were configured before the snapshot was taken.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Continue to try and track down the instability in the numbers generated
by this test by removing the (unused) network interface. It's possible
we are getting broadcast packets into the tap device and generating a
variable size of allocations.
See: #760
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Switch to using the recently added OptionParser in the code that parses
the block backend.
Fixes: #1092
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Switch to using the recently added OptionParser in the code that parses
the network backend.
Whilst doing this also update the net-backend syntax to use "sock"
rather than socket.
Fixes: #1092
Partially fixes: #1091
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Rather than repeat syntax for the vhost-user-block backend in multiple
places store it in one place and reference it from the required places.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Rather than repeat syntax for the vhost-user-net backend in multiple
places store it in one place and reference it from the required places.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Upon a virtio reset, the driver expects that available and used indexes
will be reset to 0. That's why we need to reset these values from the
VMM for any virtio device that might get reset.
This issue was not detected before because the Vec<Queue> maintained
through VirtioPciDevice or MmioDevice was never updated from the virtio
device thread after the device had been actived. For this reason, upon
reset, both available and used indexes were already at the value 0.
The issue arose when trying to reset a device after the VM was restored.
That's because during the restore, each queue is assigned with the right
available and used indexes before it is passed to the device through the
activate function. And that's why upon reset, each queue was still
assigned with these indexes while it should have been reset to 0.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
All our virtio devices support to be reset, but the virtio-mmio
transport layer was not implemented for it. This patch fixes this
lack of support.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
The ch-remote usage says:
OPTIONS:
--api-socket <api-socket> HTTP API socket path (UNIX domain socket).
However it doesn't seem to actually accept that syntax, instead
requiring "--api-socket=". This may be a clap bug however it is resolved
by setting the number of arguments requires to exactly one. Which is
also the actual correct number.
Fixes: #1117Fixes: #1116
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
To aid the debugging of why the test_memory_overhead sometimes fails
print a details of all the named regions that it uses in its
calculation.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
The current tests support giving a tap name but they only test with tap
interfaces that already exist.
Fixes: #871
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Stripping the release build for glibc shrinks the size considerably:
$ du -h target/release/cloud-hypervisor
8.5M target/release/cloud-hypervisor
$ strip target/release/cloud-hypervisor
$ du -h target/release/cloud-hypervisor
5.2M target/release/cloud-hypervisor
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
To avoid a race condition where the signal might "miss" the KVM_RUN
ioctl() instead reapeatedly try sending a signal until the vCPU run is
interrupted (as indicated by setting a new per vCPU atomic.)
It important to also clear this atomic when coming out of a paused
state.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
To ensure that the DeviceManager threads (such as those used for virtio
devices) are cleaned up it is necessary to unpark them so that they get
cleanly terminated as part of the shutdown.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
After setting the kill signal flag for the vCPU thread release the pause
flag and unpark the threads. This ensures that that the vCPU thread will
wake up and check the kill signal flag if the VM is paused.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Rather than immediately entering the vCPU run() code check if the kill
signal is set. This allows paused VMs to be shutdown.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
This module will be dedicated to DeviceNode and DeviceTree definitions
along with some dedicated unit tests.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
This iterator will let the VMM enumerate the resources associated
with the DeviceManager, allowing for introspection.
Moreover, by implementing a double ended iterator, we can get the
hierarchy from the leaves to the root of the tree, which is very
helpful in the context of restoring the devices in the right order.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Now that the device tree fully replaced the need for a dedicated list of
migratable devices, this commit cleans up the codebase by removing it
from the DeviceManager.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
This commit switches from migratable_devices to device_tree in order to
restore devices exclusively based on the device tree.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
This commit adds an extra field to the DeviceNode so that the structure
can hold a Migratable device. The long term plan is to be able to remove
the dedicated table of migratable devices, but instead rely only on the
device tree.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
In order to hide the complexity chosen for the device tree stored in
the DeviceManager, we introduce a new DeviceTree structure.
For now, this structure is a simple passthrough of a HashMap, but it can
be extended to handle some DeviceTree specific operations.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
This device has a dedicated memory region in the guest address space,
which means in case of snapshot/restore, it must be restored in the
exact same location it was during the snapshot.
That's through the resources that we can describe the location of this
extra memory region, allowing the device for correct restoring.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
This device has a dedicated memory region in the guest address space,
which means in case of snapshot/restore, it must be restored in the
exact same location it was during the snapshot.
That's through the resources that we can describe the location of this
extra memory region, allowing the device for correct restoring.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Based on the device tree, retrieve the resources associated with a
virtio-mmio device to restore it at the right location in guest address
space. Also, the IRQ number is correctly restored.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Instead of splitting the MMIO allocation and the device creation into
separate functions for virtio-mmio devices, it's is easier to move
everything into the same function as we'll be able to gather resources
in the same place for the same device.
These resources will be stored in the device tree in a follow up patch.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
In case the VM is created from scratch, the devices should be created
after the DeviceManager has been created. But this should not affect the
restore codepath, as in this case the devices should be created as part
of the restore() function.
It's necessary to perform this differentiation as the restore must go
through the following steps:
- Create the DeviceManager
- Restore the DeviceManager with the right state
- Create the devices based on the restored DeviceManager's device tree
- Restore each device based on the restored DeviceManager's device tree
That's why this patch leverages the recent split of the DeviceManager's
creation to achieve what's needed.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
This commit performs the split of the DeviceManager's creation into two
separate functions by moving anything related to device's creation after
the DeviceManager structure has been initialized.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Based on the device tree, we now ensure the restore can be done in the
right order, as it will respect the dependencies between nodes.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
The DeviceManager itself must be snapshotted in order to store the
information regarding the devices associated with it, which effectively
means we need to store the device tree.
The mechanics to snapshot and restore the DeviceManagerState are added
to the existing snapshot() and restore() implementations.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
The DeviceManager now creates a tree of devices in order to store the
resources associated with each device, but also to track dependencies
between devices.
This is a key part for proper introspection, but also to support
snapshot and restore correctly.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>