vhost-user-blk has better performance than virtio-blk, so we need
add vhost-user-blk support with SPDK in Rust-based VMMs.
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Add to the vhost_rs crate the INFLIGHT_SHMFD protocol feature that was
missing from the list. The feature has been recently introduced in
vhost-user specification, which is the reason why it was missing.
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Following the vhost-user specification that can be found at
https://github.com/qemu/qemu/blob/master/docs/interop/vhost-user.rst#virtio-device-config-space
this patch fixes the GET_CONFIG command.
This command is very specific as it needs to provide a body and a
payload corresponding to the content of the configuration structure as
an array of bytes. As a reply, it receives the body and payload provided
by the slave.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
This reverts commit 3e99098bf3 because we
realized there was no need for those extra functions to be introduced as
the existing one from the vhost crate are sufficient for the vhost-user
configuration use case.
Now that virtio-bindings is a crate part of the rust-vmm project, we
want to rely on this one instead of the local one we had so far.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Now that we have expanded our address space we should add automated
testing to try VMs that use a large amount of RAM.
As the hypervisor does an anonymous mmap() for the backing of memory and
during a typical test boot the guest will not touch it all it should be
possible to test large RAM VMs even if that exceeds the RAM of the host
machine.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
The last byte was missing from the E820 RAM area. This was due to the
function using the last address relative to the first address in the
range to calculate the size. This incorrectly calculated the size by
one. This produced incorrect E820 tables like this:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001ffffffe] usable
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Probe for the size of the host physical address range and use that to
establish the address range for the VM. This removes the limitation on
the size of the VM RAM and gives more space for the devices.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Currently all devices and guest memory share the same 64GiB
allocation. With guest memory working upwards and devices working
downwards. This creates issues if you want to either have a VM with a
large amount of memory or want to have devices with a large allocation
(e.g. virtio-pmem.)
As it is possible for the hypervisor to place devices anywhere in its
address range it is required for simplistic users like the firmware to
set up an identity page table mapping across the full range. Currently
the hypervisor sets up an identify mapping of 1GiB which the firmware
extends to 64GiB to match the current address space size of the
hypervisor.
A simpler solution is to place the device needed for booting with the
firmware (virtio-block) inside the 32-bit memory hole. This allows the
firmware to easily access the block device and paves the way for
increasing the address space beyond the current 64GiB limit.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
After the 32-bit gap the memory is shared between the devices and the
RAM. Ensure that the ACPI tables correctly indicate where the RAM ends
and the device area starts by patching the precompiled tables. We get
the following valid output now from the PCI bus probing (8GiB guest)
[ 0.317757] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.319035] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.320215] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.321431] pci_bus 0000:00: resource 7 [mem 0xc0000000-0xfebfffff window]
[ 0.322613] pci_bus 0000:00: resource 8 [mem 0x240000000-0xfffffffff window]
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
There was an off-by-error in the result making the hole one byte too
big and ending at an address too high.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
The starting length of the MCFG table was too long resulting in the
kernel trying to get extra MCFG entries from the table that weren't
there resulting in the following error message from the kernel:
PCI: no memory for MCFG entries
The MCFG table also has an 8 bytes of padding at the start before the
table begins.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Rerrange "use" statements and make rename variables and fields to
indicate they might be unused.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
This removes the register_devices() function with all that functionality
spread across the places where the devices are created.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Mark exit_evt with an underscore it may be unused (it is ignored if the
"acpi" feature is not turned on.)
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Label tests that definitely can't function with virtio-mmio (because
they use the firmware) and within those that can be used mark individual
assertions that will no longer hold (around PCI.)
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Add (non-default) support for using MMIO for virtio devices. This can be
tested by:
cargo build --no-default-features --features "mmio"
All necessary options will be included injected into the kernel
commandline.
Fixes: #243
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Derived from the crosvm code at 5656c124af2bb956dba19e409a269ca588c685e3
and adapted to work within cloud-hypervisor:
Main differences:
* Interrupt handling is done via a VirtioInterrupt turned into a
devices::Interrupt
* GuestMemory -> GuestMemoryMmap
* Differences in read/write for BusDevice
* Different crates for EventFd and GuestAddress
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
This is necesary to be able easily translate an Interrupt to a
VirtioInterrupt which is already Sync.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
This is a quick guide on how to create a custom Clear Linux image based
on the official tooling provided by Clear Linux. If for any reason, the
image we are using is missing some interesting bundles that are packaged
by Clear Linux, this documentation will be the guide on how to proceed.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
By relying on a decompressed image, this patch assumes that downloading
the image will always be faster than decompressing it from the worker
VM.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Rather than calling it at the very start of the VM execution (i.e. when
the VCPUs are created) do it as part of the DeviceManager creation.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Create the virtio devices independently of adding them to the PCI bus.
Instead accrue the devices in a vector and add them to the bus en-masse.
This will allow the virtio device creation to be used independently of
PCI based transport.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
This patch extends the current set of integration tests to correctly
validate that virtio-vsock is functional. It establishes a communication
between host and guest relying on the newly integrated vsock device.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Rely on the newly generated Clear Linux image for the integration
testing of cloud-hypervisor. The image has been generated using the
Clear Linux clr-installer tooling, which means it is in compliance with
the Clear Linux licensing.
This new image contains one more bundle that was not part of the default
cloudguest image. This bundle is basic-sysadmin, and contains both nc
and socat utilities.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
In order to interact between host and guest through socket connection,
socat is a useful utility needed for integration testing.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
In order to make the tests more verbose and help identify more quickly
where a test might be failing, this patch adds the ability for the unit
tests to print useful information with println.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
The goal here is to decouple the Guest instance from the ssh connection
to send some commands to the guest. The reason being to allow ssh
commands to be issued from a different thread, which can be useful to
wait for the end of a command with a thread.join().
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
As part of the reboot test check that the binary cleanly terminated
after the subsequent shutdown.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Rather than sending a signal to the signal handler used for handling
SIGWINCH calls instead use the crate provided termination method. This
also unregisters the signal handler which also means that there won't be
a leaked signal handler remaining.
This leaked signal handler is what was causing a failure to cleanup up
the thread on subsequent requests breaking two reboots in a row.
Fixes: #252
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
With ACPI disabled there is no way to support both reset and shutdown so
make the VMM exit if the VM is rebootet (via i8042 or triple-fault
reset.)
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
This unit testing porting effort is based off of Firecracker commit
1e1cb6f8f8003e0bdce11d265f0feb23249a03f6
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
This is the last step connecting the dots between the virtio-vsock
device and the bulk of the logic hosted in the unix and csm modules.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
This commit relies on the new vsock::unix module to create the backend
that will be used from the virtio-vsock device.
The concept of backend is interesting here as it would allow for a vhost
kernel backend to be plugged if that was needed someday.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
