This patch enables multi-queue support for creating virtio-net devices by
accepting multiple TAP fds, e.g. '--net fds=3:7'.
Fixes: #2164
Signed-off-by: Bo Chen <chen.bo@intel.com>
This helper can open a TAP device and configure the interface on it. If
the device needs to be opened multiple times for MQ then it also handles
that correctly.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Now that BlockIoUring is the only implementation of virtio-block,
handling both synchronous and asynchronous backends based on the
AsyncIo trait, we can rename it to Block.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Now that both synchronous and asynchronous backends rely on the
asynchronous version of virtio-block (namely BlockIoUring), we can
get rid of the synchronous version (namely Block).
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Based on the synchronous QCOW file implementation present in the qcow
crate, we created a new qcow_sync module in block_util that ports this
synchronous implementation to the AsyncIo trait.
The point is to reuse virtio-blk asynchronous implementation for both
synchronous and asynchronous backends.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Based on the synchronous RAW file implementation present in the qcow
crate, we created a new raw_sync module in block_util that ports this
synchronous implementation to the AsyncIo trait.
The point is to reuse virtio-blk asynchronous implementation for both
synchronous and asynchronous backends.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Based on the new DiskFile and AsyncIo traits, the implementation of
asynchronous block support does not have to be tied to io_uring anymore.
Instead, the only thing the virtio-blk implementation knows is that it
is using an asynchronous implementation of the underlying disk file.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Even though the driver can provide fewer queues than those advertised
for some device types their is a minimum number that is required for
operation.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
It is permissable for the driver to program fewer queues than offered by
the device. Filter the queues so that only the ready ones are included
and check that they have valid addresses configured.
Fixes: #2136
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Don't assume that the number of queues provided match the number of
queues offered. The virtio spec allows the driver to program fewer
queues.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Rather than having to give and return the ioeventfd used for a device
clone them each time. This will make it simpler when we start handling
the driver enabling fewer queues than advertised by the device.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
We have killed the device thread by writing to the exit EventFd but we
should wait for them to quit to ensure consistency.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
In order to make the thread naming more useful derive their name from
the device id (which can be supplied by the user) and a device specific
suffix that has details of the individual queue (or queue pair.)
e.g.
rob@artemis:~$ pstree -p -c -l -t `pidof cloud-hypervisor`
cloud-hyperviso(27501)─┬─{_console}(27525)
├─{_disk0_q0}(27529)
├─{_disk0_q1}(27532)
├─{_net1_ctrl}(27533)
├─{_net1_qp0}(27534)
├─{_net1_qp1}(27535)
├─{_rng}(27526)
├─{http-server}(27504)
├─{seccomp_signal_}(27502)
├─{signal_handler}(27523)
├─{vcpu0}(27520)
├─{vcpu1}(27522)
└─{vmm}(27503)
Fixes: #2077
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Sometimes when running under the CI tests fail due to a barrier not
being released and the guest blocks on an MMIO write. Add further
debugging to try and identify the issue.
See: #2118
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
On aarch64, the openat() syscall was missing from the seccomp filters
list, preventing the test_watchdog from running properly.
Fixes#2103
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
error: field assignment outside of initializer for an instance created with Default::default()
--> virtio-devices/src/mem.rs:496:9
|
496 | resp.resp_type = resp_type;
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^
|
note: consider initializing the variable with `mem::VirtioMemResp { resp_type: resp_type, ..Default::default() }` and removing relevant reassignments
--> virtio-devices/src/mem.rs:495:9
|
495 | let mut resp = VirtioMemResp::default();
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#field_reassign_with_default
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
On the CI we are seeing issues with the activation barriers not being released:
cloud-hypervisor: 12.452434193s: INFO:vmm/src/vm.rs:413 -- Waiting for barrier
cloud-hypervisor: 12.452499794s: INFO:virtio-devices/src/block.rs:382 -- Changing cache mode to writeback
cloud-hypervisor: 12.452605195s: INFO:vmm/src/vm.rs:413 -- Waiting for barrier
cloud-hypervisor: 12.452684596s: INFO:virtio-devices/src/transport/pci_device.rs:671 -- Waiting for barrier
cloud-hypervisor: 12.452708196s: INFO:virtio-devices/src/transport/pci_device.rs:673 -- Barrier released
cloud-hypervisor: 12.452717596s: INFO:vmm/src/vm.rs:415 -- Barrier released
Add some debugging to try and identify the vause of this issue.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Add support for creating virtio-net device from existing TAP fd.
Currently only a single fd and thus no-more than 2 queues (one pair) is
suppored.
Fixes: #2052
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
When a device is ready to be activated signal to the VMM thread via an
EventFd that there is a device to be activated. When the VMM receives a
notification on the EventFd that there is a device to be activated
notify the device manager to attempt to activate any devices that have
not been activated.
As a side effect the VMM thread will create the virtio device threads.
Fixes: #1863
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
We need to be able to return the barrier from the code that prepares to
activate the virtio device. This triggered by a write to the
configuration fields stored in the PCI BAR. Since bars can be accessed
by both memory mapping and through PCI config I/O several prototypes
must be changed.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
This can be uses to indicate to the caller that it should wait on the
barrier before returning as there is some asynchronous activity
triggered by the write which requires the KVM exit to block until it's
completed.
This is useful for having vCPU thread wait for the VMM thread to proceed
to activate the virtio devices.
See #1863
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
When a total ordering between multiple atomic variables is not required
then use Ordering::Acquire with atomic loads and Ordering::Release with
atomic stores.
This will improve performance as this does not require a memory fence
on x86_64 which Ordering::SeqCst will use.
Add a comment to the code in the vCPU handling code where it operates on
multiple atomics to explain why Ordering::SeqCst is required.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
This device operates a single virtq. When the driver offers a descriptor
to the device it is interpreted as a "ping" to indicate that the guest
is alive. A periodic timer fires and if when the timer is fired there
has not been a "ping" from the guest then the device will reset the VM.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
While using the virtio-iommu device involving L2 scenario, and tearing
things down all the way from L2 back to L0 exposed some bad syscalls
that were not part of the authorized list.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
The goal here is to replace anywhere possible a virtio structure
with a "C, packed" representation by a "C" representation. Some
virtio structures are not expected to be packed, therefore there's
no reason for using the more restrictive "C, packed" representation.
This is important since "packed" representation can still cause
undefined behaviors with Rust 2018.
By removing the need for "packed" representation, we can simplify a
bit of code by deriving the Serialize trait without writing the
implementation ourselves.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Small patch creating a dedicated `block_io_uring_is_supported()`
function for the non-io_uring case, so that we can simplify the
code in the DeviceManager.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
A new version of vm-memory was released upstream which resulted in some
components pulling in that new version. Update the version number used
to point to the latest version but continue to use our patched version
due to the fix for #1258
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
The virtio-balloon change the memory size is asynchronous.
VirtioBalloonConfig.actual of balloon device show current balloon size.
This commit add memory_actual_size to vm.info to show memory actual size.
Signed-off-by: Hui Zhu <teawater@antfin.com>
Misspellings were identified by https://github.com/marketplace/actions/check-spelling
* Initial corrections suggested by Google Sheets
* Additional corrections by Google Chrome auto-suggest
* Some manual corrections
Signed-off-by: Josh Soref <jsoref@users.noreply.github.com>
The missing syscall rt_sigprocmask(2) was triggered for the musl build
upon rebooting the VM, and was causing the VM to be killed.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
This commit gives the possibility to create a virtio-mem device with
some memory already plugged into it. This is preliminary work to be
able to reboot a VM with the virtio-mem region being already resized.
Signed-off-by: Hui Zhu <teawater@antfin.com>
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
The virtio-mem driver is generating some warnings regarding both size
and alignment of the virtio-mem region if not based on 128MiB:
The alignment of the physical start address can make some memory
unusable.
The alignment of the physical end address can make some memory
unusable.
For these reasons, the current patch enforces virtio-mem regions to be
128MiB aligned and checks the size provided by the user is a multiple of
128MiB.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Implement support for associating a virtio-mem device with a specific
guest NUMA node, based on the ACPI proximity domain identifier.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
By testing manually the memory resizing through virtio-mem, several
missing syscalls have been identified.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
The Windows virtio block driver puts multiple data descriptors between
the header and the status footer. To handle this when parsing iterate
over the descriptor chain until the end is reached accumulating the
address and length pairs in a vector. For execution iterate over the
vector and make sequential reads from the disk for each data descriptor.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
We observed CI instability for the past couple of days. This
instability is confirmed to be a result of incomplete seccomp
filters. Given the filter on 'virtio_vsock' is recently added and
is missing 'brk', it is likely to be the root cause of the
instability.
Signed-off-by: Bo Chen <chen.bo@intel.com>
This removes the dependency of the pci crate on the devices crate which
now only contains the device implementations themselves.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Split the block device implementation into code that be used in common
between multiple different virtio device implementations.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
In order to simplify the transition to VirtioCommon and to avoid needing
to set empty fields derive Default for VirtioCommon.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Rearrange the code to match other devices which makes it easier to prep
for sharing this between other devices.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Move the if-let for the taps later which makes the earlier activation
code identical to other devices.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Introduce VirtioCommon to help remove duplicated functionality and state
between implementations of VirtioDevice. Initially it is only handling
feature acknowledgement and testing.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
There will be some cases where the implementation of the snapshot()
function from the Snapshottable trait will require to modify some
internal data, therefore we make this possible by updating the trait
definition with snapshot(&mut self).
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
"debug!" marco is used in virtio-devices/src/epoll_helper.rs. When"-vvv"
and "--log-file" option was specified, the missing "SYS_write" rule
caused a "bad system call" crash.
Signed-off-by: Michael Zhao <michael.zhao@arm.com>
