For SEV-SNP VM on MSHV we need to request page access during
IO, we want to avoid such request for the page that have already
been requested. In order to maintain the bitmap we need the memory size
during bitmap creation.
Signed-off-by: Muminul Islam <muislam@microsoft.com>
VMM needs to handle VMG exit for guest request. This patch
removes the old method that uses gpa_read/write(IOCTL and hypercall),
which is expensive and update the GHCB page using
mapped(root partition) struct.
Signed-off-by: Muminul Islam <muislam@microsoft.com>
VMM needs to handle VMG exit for MMIO. This patch
removes the old method that uses gpa_read/write(IOCTL and hypercall),
which is expensive and update the GHCB page using
mapped(root partition) struct.
Signed-off-by: Muminul Islam <muislam@microsoft.com>
VMM needs to handle VMG exit for IO Port. This patch
removes the old method that uses gpa_read/write(IOCTL and hypercall),
which is expensive and update the GHCB page using
mapped(root partition) struct.
Signed-off-by: Muminul Islam <muislam@microsoft.com>
VMM needs to handle VMG exit for doorbell page. This patch
removes the old method that uses gpa_read/write(IOCTL and hypercall),
which is expensive and update the GHCB page using
mapped(root partition) struct.
Signed-off-by: Muminul Islam <muislam@microsoft.com>
After handling the VMG exit vmm needs to clear the exitinfo1
into the GHCB page. This patch replaces the old
method(gpa_write) and clear the exitinfo1 using mapped GHCB struct.
Signed-off-by: Muminul Islam <muislam@microsoft.com>
For confidential VM on MSHV, GHCB page is the communication
method between guest and host. All the CVM exits, VMM
needs to read and write to the GHCB page. MSHV provides
an option to remap the page to the root partition. This
way VMM could directly read and write to the page and
skip extra IOCTL and hypercall. This improvement makes
the IO 10% faster.
Signed-off-by: Muminul Islam <muislam@microsoft.com>
TPM support on RISC-V is not scheduled in this stage, we will come back
when it's ready and we have workloads to verify it on RISC-V.
Signed-off-by: Ruoqing He <heruoqing@iscas.ac.cn>
Currently `devices` module cannot be solely built, by specifying
`arch/kvm` to turn on the features required for its dependency - `arch`
crate to build. Thus enabling `devices` crate to be built and tested
with command:
```sh
cargo build -p devices --features kvm
```
Signed-off-by: Ruoqing He <heruoqing@iscas.ac.cn>
`arch` module are required for devices module to build. Enabling `arch`
module in target specific dependencies section.
Signed-off-by: Ruoqing He <heruoqing@iscas.ac.cn>
Provide implementation for GSI allocator to work on riscv64
architecture, and doc comment for riscv64 as well.
Signed-off-by: Ruoqing He <heruoqing@iscas.ac.cn>
Currently `vm-allocator` module cannot be solely built, by add
`features` section and specifying `arch/kvm` to turn on the features
required for its dependency - `arch` module to build. Thus enabling
`vm-allocator` crate to be built and tested with command:
```sh
cargo build -p vm-allocator --features kvm
```
Signed-off-by: Ruoqing He <heruoqing@iscas.ac.cn>
`arch` module are required to provide definitions for riscv64 system irq
and memroy allocation, enabling `arch` module in target specific
dependencies section.
Signed-off-by: Ruoqing He <heruoqing@iscas.ac.cn>
Integrate fdt setup and layout for `riscv64` to `arch` crate, provide
definitions of `riscv64` platform specific error and reuse
`MmioDeviceInfo`, `PciSpaceInfo` structures and `DeviceInfoForFdt` impl
block for `riscv64`.
Signed-off-by: Ruoqing He <heruoqing@iscas.ac.cn>
Reused layout set for `aarch64` as much as possible to provide a concise
and compatible (for devices) layout for RISC-V 64-bit.
Signed-off-by: Ruoqing He <heruoqing@iscas.ac.cn>
`fdt_parser` and `vm-fdt` crates are required to setup fdt used to boot
riscv64 virtual machines, enabling the two crates in target specific
dependencies section.
Signed-off-by: Ruoqing He <heruoqing@iscas.ac.cn>
It turns out we need to setup `a0`, `pc` and `a1` for all vcpus before
we run them, remove predicates used to set `pc` and `a1` for `vcpu0`.
Signed-off-by: Ruoqing He <heruoqing@iscas.ac.cn>
Previous `Vaia` implementation uses types as it is, thus the property
string generated for fdt setup requires additional type conversion.
Change the types used in the methods of `Vaia` trait to provide a
concise fdt setup process.
Signed-off-by: Ruoqing He <heruoqing@iscas.ac.cn>
The rate-limiter worker was moved to use small Azure VMs (#6731) and now
requires more time to complete.
Increasing its timeout to stablize this worker.
Signed-off-by: Bo Chen <bo.arvin.chen@gmail.com>
With 0.5.0 release of `rust-hypervisor-firmware`, `aarch64` binary were
added to assets, which causes the `FW_URL` to have multiple download url
separated by a white space, thus our integration tests would fail.
Constrain `FW_URL` to `hypervisor-fw` to resolve this.
Signed-off-by: Ruoqing He <heruoqing@iscas.ac.cn>
The previous docs were very developer centric and have led several
people to believe that cross-machine migration is not supported at
all.
Signed-off-by: Julian Stecklina <julian.stecklina@cyberus-technology.de>
I've added newlines between paragraphs and code blocks for easier
reading. I've also changed the code blocks to use the correct
highlighting.
Signed-off-by: Julian Stecklina <julian.stecklina@cyberus-technology.de>
Replace `map_or()` on false condition with `is_some_and` to provide
better readability, as suggestted by v1.84.0-beta.1 `cargo clippy`.
Signed-off-by: Ruoqing He <heruoqing@iscas.ac.cn>
Adapt the existing code to transparently the MemorySlotAllocator. The
MemoryManager is the canonical holder of the these values with them
turned into a MemoryAllocator on demand.
Signed-off-by: Rob Bradford <rbradford@rivosinc.com>
Add an allocator for KVM memory slots, a finite resource in the kernel
- these need to be manipulated across different crates with a common
dependency on this crate.
Signed-off-by: Rob Bradford <rbradford@rivosinc.com>
`prepare_linux` is capable of determining whether we need to invoke
`build_custom_linux` for building linux from source or `download_linux`
for downloading pre-built.
Signed-off-by: Ruoqing He <heruoqing@iscas.ac.cn>
`prepare_linux` checks if a `--build-guest-kernel` option is present,
and build kernel from `cloud-hypervisor/linux.git`. Otherwise, it will
invoke `download_linux` to use pre-built kernel.
Signed-off-by: Ruoqing He <heruoqing@iscas.ac.cn>
