When restoring a VM, the VirtioPciCfgCapInfo struct is not properly
initialized. All fields are 0, including the offset where the
capabibility starts. Hence, when you read a PCI configuration register
in the range [0..length(VirtioPciCfgCap)] you get the value 0 instead of
the actual register contents.
Linux rescans the whole PCI bus when adding a new device. It reads the
values vendor_id and device_id for every device. Because these are
stored at offset 0 in pci configuration space, their value is 0 for
existing devices. As such, Linux considers that the devices have been
unplugged and it removes them from the system.
Fixes: #6265
Signed-off-by: Alexandru Matei <alexandru.matei@uipath.com>
Current MSHV emulator only works for x86 instruction decoder. So, let's
restrict its usage to x86.
Signed-off-by: Jinank Jain <jinankjain@microsoft.com>
According to the virtio iommu spec (section 5.13.6.6), all mappings
within the entire range from virt_start to virt_end in an unmap
request must be removed. This change adds this functionality,
iterating through all mappings that fall within an unmap request
for that domain and removing them.
Signed-off-by: Andrew Carp <acarp@crusoeenergy.com>
Current instruction emulator can only decode x86 instructions. Thus,
restrict the exit handling for just x86 guests.
Signed-off-by: Jinank Jain <jinankjain@microsoft.com>
APIC controller is only available on x86 machine. ARM uses a different
interrupt controller so those exit messages won't happen for ARM guests.
Signed-off-by: Jinank Jain <jinankjain@microsoft.com>
MSR and CPUID are limited to x86 architecture so, reduce the visbility
of these two members inside struct MshvVcpu to just x86 architecture.
Signed-off-by: Jinank Jain <jinankjain@microsoft.com>
error: the item `io` is imported redundantly
Error: --> devices/src/legacy/uart_pl011.rs:468:9
|
467 | use super::*;
| -------- the item `io` is already imported here
468 | use std::io;
| ^^^^^^^
error: the item `Arc` is imported redundantly
Error: --> devices/src/legacy/uart_pl011.rs:469:21
|
467 | use super::*;
| -------- the item `Arc` is already imported here
468 | use std::io;
469 | use std::sync::{Arc, Mutex};
| ^^^
error: could not compile `devices` (lib test) due to 8 previous errors
Error: warning: build failed, waiting for other jobs to finish...
Error: The process 'cross' failed with exit code 101
Signed-off-by: Rob Bradford <rbradford@rivosinc.com>
error: the item `read_le_u32` is imported redundantly
Error: --> devices/src/legacy/gpio_pl061.rs:342:17
|
341 | use super::*;
| -------- the item `read_le_u32` is already imported here
342 | use crate::{read_le_u32, write_le_u32};
| ^^^^^^^^^^^
|
= note: `-D unused-imports` implied by `-D warnings`
= help: to override `-D warnings` add `#[allow(unused_imports)]`
error: the item `write_le_u32` is imported redundantly
Error: --> devices/src/legacy/gpio_pl061.rs:342:30
|
341 | use super::*;
| -------- the item `write_le_u32` is already imported here
342 | use crate::{read_le_u32, write_le_u32};
| ^^^^^^^^^^^^
error: the item `Arc` is imported redundantly
Error: --> devices/src/legacy/gpio_pl061.rs:343:9
|
341 | use super::*;
| -------- the item `Arc` is already imported here
342 | use crate::{read_le_u32, write_le_u32};
343 | use std::sync::Arc;
| ^^^^^^^^^^^^^^
Signed-off-by: Rob Bradford <rbradford@rivosinc.com>
clippy was flagging this up as a mixture of mixed attributes but that
attribute is no longer necessary
warning: item has both inner and outer attributes
--> hypervisor/src/arch/x86/emulator/mod.rs:769:1
|
769 | / #[cfg(test)]
770 | | mod tests {
771 | | #![allow(unused_mut)]
| |_________________________^
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#mixed_attributes_style
= note: `#[warn(clippy::mixed_attributes_style)]` on by default
Signed-off-by: Rob Bradford <rbradford@rivosinc.com>
error: the item `kvm_bindings` is imported redundantly
Error: --> hypervisor/src/kvm/aarch64/gic/mod.rs:9:18
|
9 | use crate::kvm::{kvm_bindings, KvmVm};
| ^^^^^^^^^^^^ the item `kvm_bindings` is already defined by prelude
|
= note: `-D unused-imports` implied by `-D warnings`
= help: to override `-D warnings` add `#[allow(unused_imports)]`
Signed-off-by: Rob Bradford <rbradford@rivosinc.com>
warning: assigning the result of `Clone::clone()` may be inefficient
--> vmm/src/device_manager.rs:4188:17
|
4188 | id = child_id.clone();
| ^^^^^^^^^^^^^^^^^^^^^ help: use `clone_from()`: `id.clone_from(child_id)`
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#assigning_clones
= note: `#[warn(clippy::assigning_clones)]` on by default
Signed-off-by: Rob Bradford <rbradford@rivosinc.com>
warning: `devices` (lib) generated 1 warning (run `cargo clippy --fix --lib -p devices` to apply 1 suggestion)
warning: assigning the result of `Clone::clone()` may be inefficient
--> virtio-devices/src/transport/pci_device.rs:1073:9
|
1073 | self.bar_regions = bars.clone();
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ help: use `clone_from()`: `self.bar_regions.clone_from(&bars)`
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#assigning_clones
Signed-off-by: Rob Bradford <rbradford@rivosinc.com>
warning: assigning the result of `Clone::clone()` may be inefficient
--> devices/src/pvpanic.rs:213:9
|
213 | self.bar_regions = bars.clone();
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ help: use `clone_from()`: `self.bar_regions.clone_from(&bars)`
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#assigning_clones
= note: `#[warn(clippy::assigning_clones)]` on by default
Signed-off-by: Rob Bradford <rbradford@rivosinc.com>
Model Specific Registers (MSRs) are usually available on x86
architecture. So, let's reduce the visibility of MSRs to just x86
architecture.
Signed-off-by: Jinank Jain <jinankjain@microsoft.com>
A deadlock can happen from the destination VM of live upgrade or
migration due to waiting on paused device worker threads. For example,
when a serialization error happens after the `DeviceManager` struct is
restored (where all virtio device worker threads are spawned but in
paused/parked state), a deadlock will happen from
`DeviceManager::drop()`, as it blocks for waiting worker threads to
join.
This patch ensures that we wake up all device (mostly virtio) worker
threads before we block for them to join.
Signed-off-by: Bo Chen <chen.bo@intel.com>
Current version can't boot a SNP guest while using
more than one VCPU. It turns out that there is an
issue in the Snp AP creation process. We should be writing
to Software exitinfo1 instead of exitinfo2. This patch fixes
the issue and we can boot multi vcpu SNP guest.
Signed-off-by: Muminul Islam <muislam@microsoft.com>
