Misspellings were identified by:
https://github.com/marketplace/actions/check-spelling
* Initial corrections based on forbidden patterns from the action
* Additional corrections by Google Chrome auto-suggest
* Some manual corrections
* Adding markdown bullets to readme credits section
Signed-off-by: Josh Soref <2119212+jsoref@users.noreply.github.com>
Consume FDs passed via SCM_RIGHTs to VmRestore API and assign them
appropriately to RestoredNetConfig's fds field.
Signed-off-by: Purna Pavan Chandra <paekkaladevi@linux.microsoft.com>
This is to resolve the inconsistencies from our openapi specification,
as default values do not make sense for required fields.
Reported-by: James O. D. Hunt <james.o.hunt@intel.com>
Signed-off-by: Bo Chen <chen.bo@intel.com>
When using multiple PCI segments, the 32-bit and 64-bit mmio
aperture is split equally between each segment. Add an option
to configure the 'weight'. For example, a PCI segment with a
`mmio32_aperture_weight` of 2 will be allocated twice as much
32-bit mmio space as a normal PCI segment.
Signed-off-by: Thomas Barrett <tbarrett@crusoeenergy.com>
This commit ensures that the HttpApi thread flushes all the responses
before the application shuts down. Without this step, in case of a
VmmShutdown request the application might terminate before the
thread sends a response.
Fixes: #6247
Signed-off-by: Alexandru Matei <alexandru.matei@uipath.com>
On platforms where PCIe P2P is supported, inject a PCI capability into
NVIDIA GPU to indicate support.
Signed-off-by: Thomas Barrett <tbarrett@crusoeenergy.com>
Currently the only way to set the affinity for virtio block threads is
to boot the VM, search for the tid of each of the virtio block threads,
then set the affinity manually. This commit adds an option to pin virtio
block queues to specific host cpus (similar to pinning vcpus to host
cpus). A queue_affinity option has been added to the disk flag in
the cli to specify a mapping of queue indices to host cpus.
Signed-off-by: acarp <acarp@crusoeenergy.com>
This commit adds the debug-console (or debugcon) device to CHV. It is a
very simple device on I/O port 0xe9 supported by QEMU and BOCHS. It is
meant for printing information as easy as possible, without any
necessary configuration from the guest at all.
It is primarily interesting to OS/kernel and firmware developers as they
can produce output as soon as the guest starts without any configuration
of a serial device or similar. Furthermore, a kernel hacker might use
this device for information of type B whereas information of type A are
printed to the serial device.
This device is not used by default by Linux, Windows, or any other
"real" OS, but only by toy kernels and during firmware development.
In the CLI, it can be configured similar to --console or --serial with
the --debug-console parameter.
Signed-off-by: Philipp Schuster <philipp.schuster@cyberus-technology.de>
Bumping anyhow crate from 1.0.75 to 1.0.79 will cause seccomp
failures through integration tests. Newly added backtrace support
relies on readlink and many other syscalls.
Issue noticed with test_api_http_pause_resume test, where second time
of VM PAUSE or VM RESUME prints error and causes panic.
Noticed that panic message in a thread which is not allowed to write
output triggered the issue.
So implementing Display trait for HttpError and ApiError enums to avoid
adding many syscalls to seccomp filter section.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@intel.com>
Uses of the old ApiRequest enum conflated two different concerns:
identifying an API request endpoint, and storing data for an API
request. This led to ApiRequest values being passed around with junk
data just to communicate a request type, which forced all API request
body types to implement Default, which in some cases doesn't make any
sense — what's the "default" path for a vhost-user socket? The
nonsensical Default values have led to tests relying on being able to
use nonsensical data, which is an impediment to adding better
validation for these types.
Rather than having API request types be represented by an enum, which
has to carry associated body data everywhere it's used, it makes more
sense to represent API request types as trait objects. These can have
an associated type for the type of the request body, and this makes it
possible to pass API request types and data around as siblings in a
type-safe way without forcing them into a single value even where it
doesn't make sense. Trait objects also give us dynamic dispatch,
which lets us get rid of several large match blocks.
To keep it possible to fuzz the HTTP API, all the Vmm methods called
by the HTTP API are pulled out into a trait, so the fuzzer can provide
its own stub implementation of the VMM.
Signed-off-by: Alyssa Ross <hi@alyssa.is>
Add a 'rate_limit_groups' field to VmConfig that defines a set of
named RateLimiterGroups.
When the 'rate_limit_group' field of DiskConfig is defined, all
virtio-blk queues will be rate-limited by a shared RateLimiterGroup.
The lifecycle of all RateLimiterGroups is tied to the Vm.
A RateLimiterGroup may exist even if no Disks are configured to use
the RateLimiterGroup. Disks may be hot-added or hot-removed from the
RateLimiterGroup.
When the 'rate_limiter' field of DiskConfig is defined, we construct
an anonymous RateLimiterGroup whose lifecycle is tied to the Disk.
This is primarily done for api backwards compatability. Importantly,
the behavior is not the same! This implementation rate_limits the
aggregate bandwidth / iops of an individual disk rather than the
bandwidth / iops of an individual queue of a disk.
When neither the 'rate_limit_group' or the 'rate_limiter' fields of
DiskConfig is defined, the Disk is not rate-limited.
Signed-off-by: Thomas Barrett <tbarrett@crusoeenergy.com>
Cloud-Hypervisor takes a path for Unix socket, where it will listen
on. Users can connect to the other end of the socket and access serial
port on the guest.
"--serial socket=/path/to/socket" is the cmdline option to pass to
cloud-hypervisor.
Users can use socat like below to access guest's serial port once the
guest starts to boot:
socat -,crnl UNIX-CONNECT:/path/to/socket
Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com>
This commit builds on top of the `Monitor::subscribe` function and
makes it possible to broadcast events published from `event-monitor`
over D-Bus.
The broadcasting functionality is enabled if the D-Bus API is enabled
and users who wish to also enable the file based `event-monitor` can do
so with the CLI arg `--event-monitor`.
Signed-off-by: Omer Faruk Bayram <omer.faruk@sartura.hr>
This does the same thing as df2a7c17 ("vmm: Ignore and warn TAP FDs
sent via the HTTP request body"), but for the vm.create endpoint,
which also previously would accept file descriptors in the body, and
try to use whatever fd occupied that number as a TAP device.
Signed-off-by: Alyssa Ross <hi@alyssa.is>
Port of df2a7c17 ("vmm: Ignore and warn TAP FDs sent via the HTTP
request body"), but for the vm.create endpoint, which would previously
accept file descriptors in the body, and try to use whatever fd
occupied that number as a TAP device.
Since I had to move the wrapping of the net config in an Arc until
after it was modified, I made the same change to all other endpoints,
so the style stays consistent.
Signed-off-by: Alyssa Ross <hi@alyssa.is>
Introduces three new CLI options, `dbus-service-name`,
`dbus-object-path` and `dbus-system-bus` to configure the DBus API.
Signed-off-by: Omer Faruk Bayram <omer.faruk@sartura.hr>
This commit applies the previously created seccomp filter
to the `DbusApi` thread.
Also encloses the main loop of the `DBusApi` thread using
`std::panic::catch_unwind` and `AssertUnwindSafe` in order to mirror
the behavior of the HTTP API.
Signed-off-by: Omer Faruk Bayram <omer.faruk@sartura.hr>
This commit adds support for graceful shutdown of the DBusApi thread
using `futures::channel::oneshot` channels. By using oneshot channels,
we ensure that the thread has enough time to send a response to the
`VmmShutdown` method call before it is terminated. Without this step,
the thread may be terminated before it can send a response, resulting
in an error message on the client side stating that the message
recipient disconnected from the message bus without providing a reply.
Also changes the default values for DBus service name, object path
and interface name.
Signed-off-by: Omer Faruk Bayram <omer.faruk@sartura.hr>
This commit introduces three new dependencies: `zbus`, `futures`
and `blocking`. `blocking` is used to call the Internal API in zbus'
async context which is driven by `futures::executor`. They are all
behind the `dbus_api` feature flag.
The D-Bus API implementation is behind the same `dbus_api` feature
flag as well.
Signed-off-by: Omer Faruk Bayram <omer.faruk@sartura.hr>
Remove from the documentation and API definition but continue support
using the field (with a deprecation warning.)
See: #4837
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
The coredump functionality is only implemented for x86_64 so it should
only be compiled in there.
Fixes: #4964
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
The add_device() function, from the device manager code, takes a
DeviceConfig as a parameter, instead of a VmAddDevice.
The change was originally done as part of 34412c9b41 and it didn't
break Kata Containers because the VmAddDevice and DeviceConfig structs
share most of their fields, besides the optional for serialization
`pci_segment`, which is not used by the client yet.
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
This option is needed for the openapi consumer (e.g. Kata Containers) to
load firmware (e.g. td-shim) for booting.
Signed-off-by: Bo Chen <chen.bo@intel.com>
Adjust MTU logic such that:
1. Apply an MTU to the TAP interface if the user supplies it
2. Always query the TAP interface for the MTU and expose that.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Add a new "mtu" parameter to the NetConfig structure and therefore to
the --net option. This allows Cloud Hypervisor's users to define the
Maximum Transmission Unit (MTU) they want to use for the network
interface that they create.
In details, there are two main aspects. On the one hand, the TAP
interface is created with the proper MTU if it is provided. And on the
other hand the guest is made aware of the MTU through the VIRTIO
configuration. That means the MTU is properly set on both the TAP on the
host and the network interface in the guest.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Removing the option --tdx to specify that we want to run a TD VM. Rely
on --platform option by adding the "tdx" boolean parameter. This is the
new way for enabling TDX with Cloud Hypervisor.
Along with this change, the way to retrieve the firmware path has been
updated to rely on the recently introduced PayloadConfig structure.
Fixes#4556
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
The old API remains usable, and will remain usable for two releases but
we should only advertise the new API.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
