Adding a new limitation related to the TDX guest kernel as it doesn't
allow for most ACPI devices, meaning the PCI hotplug through ACPI isn't
supported unless we use 'tdx_disable_filter' boot parameter.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
For installing packages for the custom Ubuntu image, we
need to setup DNS inside the chroot.
Signed-off-by: Archana Shinde <archana.m.shinde@intel.com>
Cut and paste doesn't quite work. Not that cut and pasters will get
this far along, but the docs should be correct in any regards.
Signed-off-by: Steven Dake <steven.dake@gmail.com>
The I/O operations knobs are prefixed `ops_` rather than `bw_`, as `bw_`
refers to the "bandwidth" knobs.
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
According to latest official images based on latest TDX guest kernel, we
update the documentation to reflect the change regarding serial support.
New guest kernels have been updated to disable usage of serial ports,
meaning adding console=ttyS0 to the kernel boot parameters will have no
effect.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
AMX is an x86 extension adding hardware units for matrix
operations (int and float dot products). The goal of the extension is
to provide performance enhancements for these common operations.
On Linux, AMX requires requesting the permission from the kernel prior
to use. Guests wanting to make use of the feature need to have the
request made prior to starting the vm.
This change then adds the first --cpus features option amx that when
passed will enable AMX usage for guests (needs a 5.17+ kernel) or
exits with failure.
The activation is done in the CpuManager of the VMM thread as it
allows migration and snapshot/restore to work fairly painlessly for
AMX enabled workloads.
Signed-off-by: William Douglas <william.douglas@intel.com>
Explain the reason why using vDPA might be interesting and how to use it
with Cloud Hypervisor.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Disable the DAX feature from the virtio-fs implementation as the feature
is still not stable. The feature is deprecated, meaning the 'dax'
parameter will be removed in about 2 releases cycles.
In the meantime, the parameter value is ignored and forced to be
disabled.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Update the content of the documentation to clarify how the cache option
from virtiofsd has an impact on the host page cache, while the dax
option for the filesystem in the guest has an impact on the guest page
cache.
The document is also updated to not have lines exceeding 80 characters.
Fixes#3826
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Document the reason why someone might need to use the balloon device and
detail the different parameters associated with it.
Fixes#3807
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Adding a bit of documentation and links about the TDShim and how to run
it with Cloud Hypervisor.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
In order to allow for human readable output for the VM configuration, we
pull it out of the snapshot, which becomes effectively the list of
states from the VM. The configuration is stored through a dedicated file
in JSON format (not including any binary output).
Having the ability to read and modify the VM configuration manually
between the snapshot and restore phases makes debugging easier, as well
as empowers users for extending the use cases relying on the
snapshot/restore feature.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Remove the bits about this feature being experimental, as well as
limitations around virtio-mem and vhost-user devices.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Since we moved to the CloudHvX64 target from EDK2, we can't use the same
OVMF firmware for both Cloud Hypervisor and QEMU. The documentation
needed some updates.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
The Linux Foundation have recommended the use of the this license for
documentation so this change included the license in the documentation
directory.
The file "networking.md" was remove as the copyright holder did not give
their consent.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Update documentation and CI to rely on the new CLOUDHV.fd firmware built
from the newly introduced target CloudHvX64.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Currently cloud-hypervisor supports hotplug of CPUs, passthrough devices, virtio devices and memory resizing,
but in hotplug.md it still mentiones: "Currently Cloud Hypervisor only supports hot plugging of CPU devices."
We need to remove the incorrect information from hotplug.md to reflect the true situation.
Fixes: #3504
Signed-off-by: Liang Zhou <zhoul110@chinatelecom.cn>
There is a corner case of using the Cloud Hypervisor on AArch64:
If the VM is started on a device where RAM is limited, and if the user
allocates nearly as much memory for the guest as is still free on the
host, we need to enable the swap memory.
This commit documented this corner case with explanation.
Also, this commit corrects the hardware requirement of the GIC interrupt
controller for running the Cloud Hypervisor on AArch64, accroding to
[1].
Fixes: https://github.com/cloud-hypervisor/cloud-hypervisor/issues/3419
Signed-off-by: Henry Wang <Henry.Wang@arm.com>
[1] https://www.kernel.org/doc/html/latest/virt/kvm/devices/arm-vgic-its.html
Bumping the OVMF binary version along with UEFI documentation to
reflect the latest set of patches on top of tianocore/edk2 'master'
branch, which can be found on the Cloud Hypervisor fork on 'ch' branch.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Current `Getting Started` section only contains steps for the x86_64
platform, as we have a documentation doing the same thing for AArch64,
we can point users to the correct documentation.
Also, this commit modifies the `docs/arm64.md` to fit the documentation
style within the project.
Signed-off-by: Henry Wang <Henry.Wang@arm.com>
Creating some brief documentation for TDX, summarizing the links on
where to find more information about TDX, as well as how to run Cloud
Hypervisor on it.
Fixes#3318
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Fixing a few inconsistencies and extending the document to tackle
multiple devices use case, as well as having multiple devices under the
same IOMMU group.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
The proper way to refer to the project is "Cloud Hypervisor" without the
hyphen in the middle. On the other hand, if one refers to the binary
name, it is "cloud-hypervisor".
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
This new document describes the available options for the parameter
`--cpus`, how to use them and what is their usage.
Fixes#3317
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
The purpose is to add more info while running
spdk vhost tgt. For example, adding more info
(total_size, block_size) to describe the meaning
on creating malloc bdev inside spdk vhost tgt.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
The elements of a list should be using commas as the correct delimiter
now that it is supported. Deprecate use of colons as delimiter.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Update introduction of option `prefault`.
In addition, this commit also did the following:
- Rearrange options, synchronize order with `config.rs`.
- Break long lines in `hugepages`.
- Update old example of `hugepages` in memory zone.
Signed-off-by: Li Yu <liyu.yukiteru@bytedance.com>
Added a section in "Usage" chapter of "iommu.md" to introduce the
special behavior when virtio-iommu is working with FDT on AArch64.
Signed-off-by: Michael Zhao <michael.zhao@arm.com>
To enable live-migration for vhost-user devices, we now always shutdown
the source VM when the migration is completed. This patch reflects this
change in the documentation.
Signed-off-by: Bo Chen <chen.bo@intel.com>
