It ensures all handlers for `ApiRequest` in `control_loop` are
consistent and minimum and should read better.
No functional changes.
Signed-off-by: Bo Chen <chen.bo@intel.com>
error: avoid using `collect()` when not needed
--> vmm/src/vm.rs:630:86
|
630 | let node_id_list: Vec<u32> = configs.iter().map(|cfg| cfg.guest_numa_id).collect();
| ^^^^^^^
...
664 | if !node_id_list.contains(&dest) {
| ---------------------------- the iterator could be used here instead
|
= note: `-D clippy::needless-collect` implied by `-D warnings`
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#needless_collect
Signed-off-by: Bo Chen <chen.bo@intel.com>
Issue from beta verion of clippy:
Error: --> vm-virtio/src/queue.rs:700:59
|
700 | if let Some(used_event) = self.get_used_event(&mem) {
| ^^^^ help: change this to: `mem`
|
= note: `-D clippy::needless-borrow` implied by `-D warnings`
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#needless_borrow
Signed-off-by: Bo Chen <chen.bo@intel.com>
In order to allow a hotplugged vCPU to be assigned to the correct NUMA
node in the guest, the DSDT table must expose the _PXM method for each
vCPU. This method defines the proximity domain to which each vCPU should
be attached to.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Implemented an architecture specific function for loading UEFI binary.
Changed the logic of loading kernel image:
1. First try to load the image as kernel in PE format;
2. If failed, try again to load it as formatless UEFI binary.
Signed-off-by: Jianyong Wu <jianyong.wu@arm.com>
Function "GuestMemory::with_regions(_mut)" were mainly temporary methods
to access the regions in `GuestMemory` as the lack of iterator-based
access, and hence they are deprecated in the upstream vm-memory crate [1].
[1] https://github.com/rust-vmm/vm-memory/issues/133
Signed-off-by: Bo Chen <chen.bo@intel.com>
As the first step to complete live-migration with tracking dirty-pages
written by the VMM, this commit patches the dependent vm-memory crate to
the upstream version with the dirty-page-tracking capability. Most
changes are due to the updated `GuestMemoryMmap`, `GuestRegionMmap`, and
`MmapRegion` structs which are taking an additional generic type
parameter to specify what 'bitmap backend' is used.
The above changes should be transparent to the rest of the code base,
e.g. all unit/integration tests should pass without additional changes.
Signed-off-by: Bo Chen <chen.bo@intel.com>
After adding "get_interrupt_controller()" function in DeviceManager,
"enable_interrupt_controller()" became redundant, because the latter
one is the a simple wrapper on the interrupt controller.
Signed-off-by: Michael Zhao <michael.zhao@arm.com>
The function used to calculate "gicr-typer" value has nothing with
DeviceManager. Now it is moved to AArch64 specific files.
Signed-off-by: Michael Zhao <michael.zhao@arm.com>
On FDT, VMM can allocate IRQ from 0 for devices.
But on ACPI, the lowest range below 32 has to be avoided.
Signed-off-by: Michael Zhao <michael.zhao@arm.com>
In migration, vm object is created by new_from_migration with
NULL kvm clock. so vm.set_clock will not be called during vm resume.
If the guest using kvm-clock, the ticks will be stopped after migration.
As clock was already saved to snapshot, add a method to restore it before
vm resume in migration. after that, guest's kvm-clock works well.
Signed-off-by: Ren Lei <ren.lei4@zte.com.cn>
Connecting a restored KVM clock vm will take long time, as clock
is NOT restored immediately after vm resume from snapshot.
this is because 9ce6c3b incorrectly remove vm_snapshot.clock, and
always pass None to new_from_memory_manager, which will result to
kvm_set_clock() never be called during restore from snapshot.
Fixes: 9ce6c3b
Signed-off-by: Ren Lei <ren.lei4@zte.com.cn>
These messages are predominantly during the boot process but will also
occur during events such as hotplug.
These cover all the significant steps of the boot and can be helpful for
diagnosing performance and functionality issues during the boot.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Separate the population of the memory and the HOB from the TDX
initialisation of the memory so that the latter can happen after the CPU
is initialised.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Now all crates use edition = "2018" then the majority of the "extern
crate" statements can be removed. Only those for importing macros need
to remain.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Create a temporary copy of the config, add the new device and validate
that. This needs to be done separately to adding it to the config to
avoid race conditions that might be result in config changes being
overwritten.
Fixes: #2564
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
To handle that devices are stored in an Option<Vec<T>> and reduce
duplicated code use generic function to add the devices to the the
struct.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
error: name `GPIOInterruptDisabled` contains a capitalized acronym
Error: --> devices/src/legacy/gpio_pl061.rs:46:5
|
46 | GPIOInterruptDisabled,
| ^^^^^^^^^^^^^^^^^^^^^ help: consider making the acronym lowercase, except the initial letter: `GpioInterruptDisabled`
|
= note: `-D clippy::upper-case-acronyms` implied by `-D warnings`
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#upper_case_acronyms
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
error: name `FinalizeTDX` contains a capitalized acronym
--> vmm/src/vm.rs:274:5
|
274 | FinalizeTDX(hypervisor::HypervisorVmError),
| ^^^^^^^^^^^ help: consider making the acronym lowercase, except the initial letter: `FinalizeTdx`
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#upper_case_acronyms
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Extend the existing url_to_path() to take the URL string and then use
that to simplify the snapshot/restore code paths.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
The MMIO structure contains the length rather than the maximum address
so it is necessary to subtract the starting address from the end address
to calculate the length.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Load the sections backed from the file into their required addresses in
memory and populate the HOB with details of the memory. Using the HOB
address initialize the TDX state in the vCPUs and finalize the TDX
configuration.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
When booting with TDX no kernel is supplied as the TDFV is responsible
for loading the OS. The requirement to have the kernel is still
currently enforced at the validation entry point; this change merely
changes function prototypes and stored state to use Option<> to support.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
When a vm is created with a pty device, on reboot the pty fd (sub
only) will only be associated with the vmm through the epoll event
loop. The fd being polled will have been closed due to the vm itself
dropping the pty files (and potentially reopening the fd index to a
different item making things quite confusing) and new pty fds will be
opened but not polled on for input.
This change creates a structure to encapsulate the information about
the pty fd (main File, sub File and the path to the sub File). On
reboot, a copy of the console and serial pty structs is then passed
down to the new Vm instance which will be used instead of creating a
new pty device.
This resolves the underlying issue from #2316.
Signed-off-by: William Douglas <william.r.douglas@gmail.com>
Update for clippy in Rust 1.50.0:
error: Unnecessary nested match
--> vmm/src/vm.rs:419:17
|
419 | / if let vm_device::BusError::MissingAddressRange = e {
420 | | warn!("Guest MMIO write to unregistered address 0x{:x}", gpa);
421 | | }
| |_________________^
|
= note: `-D clippy::collapsible-match` implied by `-D warnings`
help: The outer pattern can be modified to include the inner pattern.
--> vmm/src/vm.rs:418:17
|
418 | Err(e) => {
| ^ Replace this binding
419 | if let vm_device::BusError::MissingAddressRange = e {
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ with this pattern
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#collapsible_match
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Swap the last two parameters of guest_mem_{read,write} to be consistent
with other read / write functions.
Use more descriptive parameter names.
No functional change.
Signed-off-by: Wei Liu <liuwe@microsoft.com>
Add the ability for cloud-hypervisor to create, manage and monitor a
pty for serial and/or console I/O from a user. The reasoning for
having cloud-hypervisor create the ptys is so that clients, libvirt
for example, could exit and later re-open the pty without causing I/O
issues. If the clients were responsible for creating the pty, when
they exit the main pty fd would close and cause cloud-hypervisor to
get I/O errors on writes.
Ideally the main and subordinate pty fds would be kept in the main
vmm's Vm structure. However, because the device manager owns parsing
the configuration for the serial and console devices, the information
is instead stored in new fields under the DeviceManager structure
directly.
From there hooking up the main fd is intended to look as close to
handling stdin and stdout on the tty as possible (there is some future
work ahead for perhaps moving support for the pty into the
vmm_sys_utils crate).
The main fd is used for reading user input and writing to output of
the Vm device. The subordinate fd is used to setup raw mode and it is
kept open in order to avoid I/O errors when clients open and close the
pty device.
The ability to handle multiple inputs as part of this change is
intentional. The current code allows serial and console ptys to be
created and both be used as input. There was an implementation gap
though with the queue_input_bytes needing to be modified so the pty
handlers for serial and console could access the methods on the serial
and console structures directly. Without this change only a single
input source could be processed as the console would switch based on
its input type (this is still valid for tty and isn't otherwise
modified).
Signed-off-by: William Douglas <william.r.douglas@gmail.com>
This skeleton commit brings in the support for compiling aarch64 with
the "acpi" feature ready to the ACPI enabling. It builds on the work to
move the ACPI hotplug devices from I/O ports to MMIO and conditionalises
any code that is x86_64 only (i.e. because it uses an I/O port.)
Filling in the aarch64 specific details in tables such as the MADT it
out of the scope.
See: #2178
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Use the ACPI GED device to trigger a notitifcation of type
POWER_BUTTON_CHANGED which will ultimately lead to the guest being
notified.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Renamed this bitfield as it will also be used for non-hotplug purposes
such as synthesising a power button.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
When a device is ready to be activated signal to the VMM thread via an
EventFd that there is a device to be activated. When the VMM receives a
notification on the EventFd that there is a device to be activated
notify the device manager to attempt to activate any devices that have
not been activated.
As a side effect the VMM thread will create the virtio device threads.
Fixes: #1863
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
There are some code base and function which are purely KVM specific for
now and we don't have those supports in mshv at the moment but we have plan
for the future. We are doing a feature guard with KVM. For example, KVM has
mp_state, cpu clock support, which we don't have for mshv. In order to build
those code we are making the code base for KVM specific compilation.
Signed-off-by: Muminul Islam <muislam@microsoft.com>
