This was causing issues when the kernel was trying to reset the
interrupt and making the reboot fail.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
The tty mode remains raw mode when cloud-hypervisor is terminted by
SIGTERM or SIGINT. The terminal is unusable due to echoing is
disabled which is really annoying.
Signed-off-by: Qiu Wenbo <qiuwenbo@phytium.com.cn>
This commit ensures device's PCI config space is being written after
MSI/MSI-X interrupts have been enabled/disabled. In case of MSI, when
the interrupts are enabled through VFIO (using VFIO_DEVICE_SET_IRQS),
the MSI Enable bit in the MSI capability structure found in the PCI
config space is disabled by default. That's why when the guest is
enabling this bit, we first need to enable the MSI interrupts with
VFIO through VFIO_DEVICE_SET_IRQS ioctl, and only after we can write
to the device region to update the MSI Enable bit.
Fixes#460
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
The comments of vfio kernel module said that individual subindex
interrupts can be disabled using the -1 value for DATA_EVENTFD or
the index can be disabled as a whole with:
flags = (DATA_NONE|ACTION_TRIGGER), count = 0.
Signed-off-by: Wu Zongyong <wuzongyong@linux.alibaba.com>
CC: Liu Jiang <gerry@linux.alibaba.com>
Some physical address bits may become reserved in page table when SME
is enabled on AMD platform. Guest will trigger a reserved bit
violation page fault in this case due to write these reserved bits to 1
in page table. We need reduce the reserved bits to get the right
physical address range.
Signed-off-by: Qiu Wenbo <qiuwenbo@phytium.com.cn>
The KVM_SET_GSI_ROUTING ioctl is very simple, it overrides the previous
routes configuration with the new ones being applied. This means the
caller, in this case cloud-hypervisor, needs to maintain the list of all
interrupts which needs to be active at all times. This allows to
correctly support multiple devices to be passed through the VM and being
functional at the same time.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
In order to improve the existing VFIO code, this patch registers the
eventfds used to trigger KVM interrupts only when the interrupts are
enabled, and unregisters them when interrupts are disabled.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
If the MSG_CTL is being written from a 32 bits write access, the offset
won't be 0x2, but 0x0 instead. That's simply because 32 bits access have
to be aligned on each double word.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
The documentation was out of date since the URL to download virtiofsd
binary was not valid anymore. Instead, the updated documentation now
describe how to build virtiofsd from source.
Fixes#491
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Call the "CTFY" method that will itself call Notify() on the CPU objects
in the ACPI namespace.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Add ability to notify via the GED device that there is some new hotplug
activity. This will be used by the CpuManager (and later DeviceManager
itself) to notify of new hotplug activity.
Currently it has a hardcoded IRQ of 5 as the ACPI tables also need to
refer to this IRQ and the IRQ allocation does not permit the allocation
of specific IRQs.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
This device provides the ability to notify the kernel via interrupt that
there is some new hotplug activity. The type is determined by reading
from the I/O port.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Currently only increasing the number of vCPUs is supported but in the
future it will be extended.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
When configuring a processor after boot as a hotplug CPU we only
configure a subset of the CPU state. In particular we should not
configure the FPU, segment registers (or reconfigure the paging which is
a side-effect of that) nor the main registers. Achieve this by making
the function take an Option type for the start address.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Refactor the vCPU thread starting so that there is the possibility to
bring on extra vCPU threads.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Currently this just holds the thread handle but will be enlarged to
encompass details such as whether the vCPU is currently being inserted
or ejected.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
The easiest way to detect if the kernel is willing to accept hotplug
vCPUs is to check the dmesg output.
Switch the test to bionic as the Clear Cloud image lacks "dmesg."
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
The MADT table contains the details of all the potential vCPUs and
whether they are present at boot (as indicated by the flags field.)
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
When initialising the ACPI tables and configuring the VM use the new
accessor on the CpuManager to get the number of boot vCPUs.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
The way in which offsets are currently use in memory regions is
derived from QEMU's contrib/libvhost-user, but while this one works
mainly by translating vmm va's to local va's, vm-memory expects us to
use proper guest addresses and thus, define memory regions that
actually match the guest's memory disposition.
With this change, we create the memory regions with the proper length
and offsets, extend AddrMapping to store the guest physical address,
and use the latter instead of offset in vmm_va_to_gpa().
Signed-off-by: Sergio Lopez <slp@redhat.com>
Since the kvm crates now depend on vmm-sys-util, the bump must be
atomic.
The kvm-bindings and ioctls 0.2.0 and 0.4.0 crates come with a few API
changes, one of them being the use of a kvm_ioctls specific error type.
Porting our code to that type makes for a fairly large diff stat.
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Reorder the build commands so that more build assets in the target/
build directory can be reused. This will reduce the build time.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Introduce method unmap_mmio_regions to unmap all regions mapped to host.
This patch eliminate the error message "Could not unset container".
Signed-off-by: Wu Zongyong <wuzongyong@linux.alibaba.com>
context ID on vsock man defines a 32-bits value, openapi default integer
is a signed 32-bits value.
This could lead to miss one bit during castings for typed client
implmentations. Lets increase the range of valid values by requesting an
int64.
Signed-off-by: Jose Carlos Venegas Munoz <jose.carlos.venegas.munoz@intel.com>
