The uuid indicates the unique ID of a virtual machine.
cloud-hypervisor takes the uuid passed by libvirt
and uses it to initialize cloud-init.
Signed-off-by: lizhaoxin1 <Lxiaoyouling@163.com>
The parameter "poll_queue" was useful at the time Cloud Hypervisor was
responsible for spawning vhost-user backends, as it was carrying the
information the vhost-user-block backend should have this option enabled
or not.
It's been quite some time that we walked away from this design, as we
now expect a management layer to be responsible for running vhost-user
backends.
That's the reason why we can remove "poll_queue" from the DiskConfig
structure.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
When starting the VM such that it is already on a breakpoint (via
stop_on_boot) when attached to gdb then start the vCPUs in a paused
state rather than starting the vCPUs later (upon resume).
Further, make the resumption/break of the VM more resilient by only
attempting to resume the vCPUs if were are already in a break point and
only attempting to pause/break if we were already running.
Fixes: #4354
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Remove the hardcoded addresses.
Also remove PM_TMR_BLK as spec compliant implementation will use
X_PM_TMR_BLK over this field.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
The original code uses kvm_device_attr directly outside of the
hyeprvisor crate. That leaks hypervisor details.
No functional change intended.
Signed-off-by: Wei Liu <liuwe@microsoft.com>
This requires making get/set_lapic_reg part of the type.
For the moment we cannot provide a default variant for the new type,
because picking one will be wrong for the other hypervisor, so I just
drop the test cases that requires LapicState::default().
Signed-off-by: Wei Liu <liuwe@microsoft.com>
CpuId is an alias type for the flexible array structure type over
CpuIdEntry. The type itself and the type of the element in the array
portion are tied to the underlying hypervisor.
Switch to using CpuIdEntry slice or vector directly. The construction of
CpuId type is left to hypervisors.
This allows us to decouple CpuIdEntry from hypervisors more easily.
No functional change intended.
Signed-off-by: Wei Liu <liuwe@microsoft.com>
We only need to do this for x86 since MSHV does not have aarch64 support
yet. This reduces unnecessary code churn.
Signed-off-by: Wei Liu <liuwe@microsoft.com>
VmState was introduced to hold hypervisor specific VM state. KVM does
not need it and MSHV does not really use it yet.
Just drop the code. It can be easily revived once there is a need.
Signed-off-by: Wei Liu <liuwe@microsoft.com>
Previously, we were assuming that every time an eventfd notified us,
there was only a single event waiting for us. This meant that if,
while one API request was being processed, two more arrived, the
second one would not be processed (until the next one arrived, when it
would be processed instead of that event, and so on). To fix this,
make sure we're processing the number of API and debug requests we've
been told have arrived, rather than just one. This is easy to
demonstrate by sending lots of API events and adding some sleeps to
make sure multiple events can arrive while each is being processed.
For other uses of eventfd, like the exit event, this doesn't matter —
even if we've received multiple exit events in quick succession, we
only need to exit once. So I've only made this change where receiving
an event is non-idempotent, i.e. where it matters that we process the
event the right number of times.
Technically, reset requests are also non-idempotent — there's an
observable difference between a VM resetting once, and a VM resetting
once and then immediately resetting again. But I've left that alone
for now because two resets in immediate succession doesn't sound like
something anyone would ever want to me.
Signed-off-by: Alyssa Ross <hi@alyssa.is>
Function `system_registers` took mutable vector reference and modified
the vector content. Now change the definition to `get/set` style.
And rename to `get/set_sys_regs` to align with other functions.
Signed-off-by: Michael Zhao <michael.zhao@arm.com>
On AArch64, the function `core_registers` and `set_core_registers` are
the same thing of `get/set_regs` on x86_64. Now the names are aligned.
This will benefit supporting `gdb`.
Signed-off-by: Michael Zhao <michael.zhao@arm.com>
The VM specific signal (currently only SIGWINCH) should only be handled
when the VM is running.
The generic VMM signals (SIGINT and SIGTERM) need handling at all times.
Split the signal handling into two separate threads which have differing
lifetimes.
Tested by:
1.) Boot full VM and check resize handling (SIGWINCH) works & sending
SIGTERM leads to cleanup (tested that API socket is removed.)
2.) Start without a VM and send SIGTERM/SIGINT and observe cleanup (API
socket removed)
3.) Boot full VM, delete VM and observe 2.) holds.
4.) Boot full VM, delete VM, recreate VM and observe 1.) holds.
Fixes: #4269
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
The Linux kernel now checks for this before marking CPUs as
hotpluggable:
commit aa06e20f1be628186f0c2dcec09ea0009eb69778
Author: Mario Limonciello <mario.limonciello@amd.com>
Date: Wed Sep 8 16:41:46 2021 -0500
x86/ACPI: Don't add CPUs that are not online capable
A number of systems are showing "hotplug capable" CPUs when they
are not really hotpluggable. This is because the MADT has extra
CPU entries to support different CPUs that may be inserted into
the socket with different numbers of cores.
Starting with ACPI 6.3 the spec has an Online Capable bit in the
MADT used to determine whether or not a CPU is hotplug capable
when the enabled bit is not set.
Link: https://uefi.org/htmlspecs/ACPI_Spec_6_4_html/05_ACPI_Software_Programming_Model/ACPI_Software_Programming_Model.html?#local-apic-flags
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
This check is new in the beta version of clippy and exists to avoid
potential deadlocks by highlighting when the test in an if or for loop
is something that holds a lock. In many cases we would need to make
significant refactorings to be able to pass this check so disable in the
affected crates.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
warning: you are deriving `PartialEq` and can implement `Eq`
--> vmm/src/serial_manager.rs:59:30
|
59 | #[derive(Debug, Clone, Copy, PartialEq)]
| ^^^^^^^^^ help: consider deriving `Eq` as well: `PartialEq, Eq`
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#derive_partial_eq_without_eq
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Tested:
1. SIGTERM based
2. VM shutdown/poweroff
3. Injected VM boot failure after calling Vm::setup_tty()
Fixes: #4248
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
The snapshots are stored in a BTree which is ordered however as the ids
are strings lexical ordering places "11" ahead of "2". So encode the
vCPU id with zero padding so it is lexically sorted.
This fixes issues with CPU restore on aarch64.
See: #4239
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
When restoring a VM, the restore codepath will take care of mapping the
MMIO regions based on the information from the snapshot, rather than
having the mapping being performed during device creation.
When the device is created, information such as which BARs contain the
MSI-X tables are missing, preventing to perform the mapping of the MMIO
regions.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Based on recent KVM host patches (merged in Linux 5.16), it's forbidden
to call into KVM_SET_CPUID2 after the first successful KVM_RUN returned.
That means saving CPU states during the pause sequence, and restoring
these states during the resume sequence will not work with the current
design starting with kernel version 5.16.
In order to solve this problem, let's simply move the save/restore logic
to the snapshot/restore sequences rather than the pause/resume ones.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
The vCPU is created and set after all the devices on a VM's boot.
There's no reason to follow a different order on the restore codepath as
this could cause some unexpected behaviors.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
