Commit Graph

395 Commits

Author SHA1 Message Date
Rob Bradford
bb6b738c0d tests: Enable test_multiple_network_interfaces with virtio-mmio
Ensure that multiple network interfaces function correctly when using
virtio-mmio.

Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2020-07-09 09:53:30 +02:00
Rob Bradford
730f3884f4 tests: Enable test_virtio_blk with virtio-mmio transport
This test makes use of MQ support in virtio-block so it is advisable to
test with virtio-mmio.

Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2020-07-09 09:53:13 +02:00
Rob Bradford
d725c2cbfb tests: Enable virtio-mem testing with virtio-mmio
Try and enable virtio-mem testing when using the virtio-mmio transport.

Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2020-07-09 09:52:56 +02:00
Sebastien Boeuf
ef554ba13c ci: Increase time to stabilize memory measurement
Check if increasing the time after the VM is spawned help with getting
more stable numbers for the base PSS.

Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
2020-07-07 19:36:12 +02:00
Hui Zhu
b59f231092 tests: Add integration test to test_memory_hotplug for virtio-balloon
Signed-off-by: Hui Zhu <teawater@antfin.com>
2020-07-07 17:25:13 +01:00
Henry Wang
33c5d6bb98 tests: Enable test_aarch64_pe_boot case for AArch64
The compiled AArch64 linux kernel by running `make` is in PE format
instead of vmlinux, vmlinux.pvh and bzImage format. Therefore we
need to add integration test for this case.

Signed-off-by: Henry Wang <Henry.Wang@arm.com>
2020-07-07 13:55:39 +01:00
Sebastien Boeuf
bb9174601a ci: Separate parallel vs sequential tests
In order to differentiate tests that can be run in parallel versus
tests that must be run on their own, we move all tests into dedicated
modules.

The point is to avoid glitches in results that can be caused by the fact
that other tests (hence VMs) are running at the same time.

Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
2020-07-03 13:08:37 +01:00
Sebastien Boeuf
c2920d2b6b ci: Move from Clear Linux to Ubuntu Focal Fossa cloud image
Move the CI to rely entirely on Ubuntu cloud images. It's worth noting
that both QCOW2 and RAW images from Ubuntu Focal Fossa have been
modified to include the tools needed from integration tests.
This means fio, iperf, iperf3, netcat and socat have been added to the
image. The snapd package have been fully removed as it was expecting the
support for squashfs (not present when using our own kernel from direct
kernel boot), which was causing some failures, and was preventing
cloud-init from terminating properly.

Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
2020-07-02 13:47:16 +02:00
Rob Bradford
135ee4568e tests: Enhance rate_limited_copy() to also consider free disk space
With QCOW disk images the space needed is greater than the size of the
iamge as any "zero" blocks in the image are allocated when they are
touched making the image bigger.

Here we add a threshold of 6GiB with added debugging messages to ensure
that there is sufficient disk space to run the tests.

Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2020-07-02 11:52:49 +02:00
Sebastien Boeuf
514978b54a ci: Improve test_snapshot_restore with multiple vCPUs
Extend the existing integration test test_snapshot_restore by testing
with more than one vCPU.

Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
2020-06-30 14:03:03 +01:00
Rob Bradford
48a05c4727 tests: Add simple counters integration test
Add a simple test to check that the data from the counters matches what
is expected and that the value of the counters increases after an
operation that will hit all counters.

Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2020-06-25 07:02:44 +02:00
Rob Bradford
4b64f2a027 vmm: cpu: Reuse already allocated vCPUs if available
When a request is made to increase the number of vCPUs in the VM attempt
to reuse any previously removed (and hence inactive) vCPUs before
creating new ones.

This ensures that the APIC ID is not reused for a different KVM vCPU
(which is not allowed) and that the APIC IDs are also sequential.

The two key changes to support this are:

* Clearing the "kill" bit on the old vCPU state so that it does not
  immediately exit upon thread recreation.
* Using the length of the vcpus vector (the number of allocated vcpus)
  rather than the number of active vCPUs (.present_vcpus()) to determine
  how many should be created.

This change also introduced some new info!() debugging on the vCPU
creation/removal path to aid further development in the future.

TEST=Expanded test_cpu_hotplug test.

Fixes: #1338

Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2020-06-23 14:11:14 +01:00
Sebastien Boeuf
b5cf150ac3 ci: Update test_snapshot_restore by resuming the VM
Now that snapshot/restore is symmetrical, that is the VM must be paused
before it is snapshot and it must be resumed after it's been restored,
the integration test is updated accordingly.

Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
2020-06-23 10:15:03 +02:00
Rob Bradford
798f3f01a9 tests: Add integration tests for CPU topology
Add multiple integration tests with various different CPU topologies and
check that they work as expected.

Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2020-06-17 12:18:09 +02:00
Sebastien Boeuf
4f311b56eb ci: Extend integration tests for checking PCI hotplug response
Upon PCI hotplug, the VMM now returns some information about the device
name and the associated b/d/f. This patch extends the integration tests
so that we validate the response is the one that is expected.

Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
2020-06-12 13:37:18 +01:00
Bo Chen
cc85d896a5 tests: Extend test_*_reboot with checks on fd leaking
This revised version of the patch reuses the back-off strategy from
'ssh_command()' to deal with varying booting time.

Fixes: #1209

Signed-off-by: Bo Chen <chen.bo@intel.com>
2020-06-10 13:54:18 +01:00
Rob Bradford
aa79a92c35 tests: Add integration test for unprivileged network
This tests whether we can have a working network without having
CAP_NET_ADMIN.

Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2020-06-08 17:56:10 +02:00
Bo Chen
a8cdf2f070 tests,vm-virtio,vmm: Use 'socket' for all CLI/API parameters
This patch unifies the inconsistent uses of 'socket' and 'sock' from our
CLI/API parameters.

Fixes: #1091

Signed-off-by: Bo Chen <chen.bo@intel.com>
2020-06-08 17:41:12 +02:00
Rob Bradford
eabf43fbf6 Revert "tests: Extend test_*_reboot with checks on fd leaking"
This reverts commit 7dc4e91303.

Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2020-06-05 14:09:17 +01:00
Bo Chen
7dc4e91303 tests: Extend test_*_reboot with checks on fd leaking
Fixes: #1209

Signed-off-by: Bo Chen <chen.bo@intel.com>
2020-06-04 20:48:44 +01:00
Rob Bradford
af8292b623 vmm, config, vhost_user_blk: remove "wce" parameter
This config option provided very little value and instead we now enable
this feature (which then lets the guest control the cache mode)
unconditionally.

Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2020-05-21 08:40:43 +02:00
Sebastien Boeuf
a7f236b896 ci: Extend snapshot/restore to validate virtio-vsock
Now that snapshot/restore support has been enabled for virtio-vsock, the
corresponding integration test is expanded with some validation that
virtio-vsock supports to be snapshot and restored.

Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
2020-05-19 18:52:08 +02:00
Sebastien Boeuf
f975998875 ci: Extend snapshot/restore test with virtio-iommu
When compiled with pci feature, the integration test now validates that
/dev/vdb can be correctly read while being placed behing a virtual
IOMMU.

Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
2020-05-19 09:03:41 +01:00
Sebastien Boeuf
9f2eddd9d8 ci: Fix test_serial_off
The integration test validating that --serial off works correctly was
not properly written as it was using the FW, which by default would use
the kernel command line found in the EFI partition. Unfortunately, this
kernel command line was including "console=ttyS0", which causes the
kernel to try to write to the serial port, even if there's no serial
port being emulated.

The problem is, when no emulation of the serial port is provided, the
default value returned on 0x3f8 is 0, which makes the guest kernel think
that some data needs to be read.

The only way to avoid all this is by ensuring we can control the kernel
command line by removing any occurence of "console=ttyS0" from it.

Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
2020-05-19 09:22:09 +02:00
Rob Bradford
391508f054 tests: Add tests checking for host MAC address setting
Extend the set of tests we have for virtio-net and vhost-user-net to
check for host MAC address setting.

Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2020-05-15 11:45:09 +01:00
Sebastien Boeuf
ba4ec7fce2 ci: Extend snapshot_restore_test with hotplug
There's a simple way to trigger PCI BAR reprogramming for a given
device, by removing it and then hotplugging it back. The Linux kernel
will simply choose to place the BARs at different location than the ones
chosen by Cloud-Hypervisor. By doing so, and creating the snapshot after
this hotplug operation, we can manage to validate that the resource are
correctly restored for a given virtio-pci device.

Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
2020-05-14 11:02:22 +02:00
Sebastien Boeuf
9e165c2c17 ci: Enable snapshot/restore integration test
Now that snapshot/restore feature is stable for both virtio-mmio and
virtio-pci devices, we re-enable the integration test for validating
snapshot/restore does not get broken.

Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
2020-05-14 11:02:22 +02:00
Rob Bradford
80aa0a753d tests: Test unplugging virtio-fs
Now that virtio-fs has unplug support try unplugging and readding the
virtio-fs device.

Fixes: #1050

Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2020-05-13 09:11:50 +01:00
Rob Bradford
36bffff22a tests: Expand the test_large_memory() test to cover lots of vCPUs
Ensure that there is no regression in our support for a large number of
vCPUS.

Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2020-05-11 19:34:34 +01:00
Rob Bradford
16ac24d8f7 tests: Only test "noacpi" test when we don't build with ACPI
The mmio integration test build currently doesn't use ACPI so piggyback
on that test variation.

Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2020-05-11 19:34:34 +01:00
Rob Bradford
52ac3779df tests: Remove network interface from test_memory_overhead
Continue to try and track down the instability in the numbers generated
by this test by removing the (unused) network interface. It's possible
we are getting broadcast packets into the tap device and generating a
variable size of allocations.

See: #760

Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2020-05-11 11:27:19 +02:00
Rob Bradford
592de97fbd vhost_user_net: Use config::OptionParser to simplify net backend parsing
Switch to using the recently added OptionParser in the code that parses
the network backend.

Whilst doing this also update the net-backend syntax to use "sock"
rather than socket.

Fixes: #1092
Partially fixes: #1091

Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2020-05-11 09:40:40 +02:00
Rob Bradford
9adc32a043 tests: Print out details for smaps in test_memory_overhead
To aid the debugging of why the test_memory_overhead sometimes fails
print a details of all the named regions that it uses in its
calculation.

Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2020-05-07 17:53:47 +02:00
Rob Bradford
250f825f58 tests: Check that requesting tap name for virtio-net succeeds
When requesting a specific tap name with virtio-net check that that tap
device is created.

Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2020-05-07 13:41:00 +02:00
Rob Bradford
006da0405e tests: Check tap name provided is used for vhost_user_net tests
If a preferred tap name is given check that it is created.

Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2020-05-07 13:41:00 +02:00
Rob Bradford
54b3329f0c tests: Add tests that use (non-existing) named tap
The current tests support giving a tap name but they only test with tap
interfaces that already exist.

Fixes: #871

Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2020-05-07 13:41:00 +02:00
Rob Bradford
b8841d7a82 tests: Validate vsock functionality works across a reboot
Reboot the VM and check that the vsock functionality is preserved.

Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2020-05-05 13:01:38 +02:00
Rob Bradford
cb220ae184 tests: Add some debugging to test_memory_overhead
This test is flaky. Add some debugging to identify what the bad value
is.

See: #760

Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2020-05-05 11:35:12 +02:00
Rob Bradford
d5bfa2dfc8 vmm, vhost_user_block: Make parameter names match --disk
Make the --block-backend parameters match the --disk parameters.

Fixes: #898

Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2020-04-30 15:20:55 +02:00
Samuel Ortiz
ce794f7858 ci: Pass target triple to the test scripts
We pass it to the integration and unit tests script through --libc.
Cargo tests are left unmodified.

Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2020-04-29 17:57:01 +01:00
Rob Bradford
3012975c17 tests: Enhance vsock integration test to support hotplug
Test basic vsock functionality works with hotplugged vsock device.

Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2020-04-29 12:44:49 +01:00
Rob Bradford
1df38daf74 vmm, tests: Make specifying a size optional for virtio-pmem
If a size is specified use it (in particular this is required if the
destination is a directory) otherwise seek in the file to get the size
of the file.

Add a new check that the size is a multiple of 2MiB otherwise the kernel
will reject it.

Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2020-04-24 18:30:05 +01:00
Bo Chen
3f42f86d81 vmm: Add the 'shared' and 'hugepages' controls to MemoryConfig
The new 'shared' and 'hugepages' controls aim to replace the 'file'
option in MemoryConfig. This patch also updated all related integration
tests to use the new controls (instead of providing explicit paths to
"/dev/shm" or "/dev/hugepages").

Fixes: #1011

Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Signed-off-by: Bo Chen <chen.bo@intel.com>
2020-04-23 21:39:51 +02:00
Rob Bradford
c790bba905 tests: Migrate from Ubuntu Eoan to Focal
This is the latest LTS release.

Fixes: #989

Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2020-04-23 13:01:02 +02:00
Sebastien Boeuf
3e8a6ba0c0 ci: Ignore test_snapshot_restore
The newly added integration test "test_snapshot_restore" is very
unstable, which causes our CI to fail on most pull requests, which is
not acceptable. That's why we ignore this test until we can fix the
stability issue.

Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
2020-04-23 11:38:47 +02:00
Sebastien Boeuf
f6b150a34d ci: Add integration test for VM migration
Now that we have multiple virtio devices supporting snapshot and restore
operations, we can add a new integration test to validate the migration
feature works as expected.

The important part is virtio-net as it is used to ssh into the VM to
verify the VM has been restored in the proper state.

This test only works for virtio-mmio for now. Further support for
testing virtio-pci will be added once the virtio-pci transport layer
will support migration.

Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
2020-04-22 22:19:31 +02:00
Sebastien Boeuf
c23b48888d ci: Factorize virtio-fs hotplug integration tests
There is some duplication between regular and hotplug virtio-fs tests
that can be factorized by adding a simple hotplug flag to choose if each
test should run with or without hotplugging the device.

Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
2020-04-20 20:36:26 +02:00
Dean Sheather
f68b08bfdb tests: add integration tests for vm.add-fs route
Adds integration tests with and without dax for the new vm.add-fs route.

Signed-off-by: Dean Sheather <dean@coder.com>
2020-04-20 20:36:26 +02:00
Rob Bradford
ea82632c70 tests: Enhance test_pmem_hotplug to also unplug device
Ensure that the device is removed and the removed device stays away
after a reboot.

Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2020-04-16 17:03:25 +02:00
Rob Bradford
6389418fa6 tests: Enhance test_disk_hotplug to also unplug device
Ensure that the device is removed and the removed device stays away
after a reboot.

Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2020-04-16 17:03:25 +02:00
Alejandro Jimenez
4617aefd60 tests: Test initramfs loading with PVH boot
Add an integration test to verify loading an initramfs using the
PVH boot protocol.

Signed-off-by: Alejandro Jimenez <alejandro.j.jimenez@oracle.com>
2020-04-09 17:28:03 +02:00
Sebastien Boeuf
0c29c2ec49 ci: Extend VFIO test with memory hotplug
One more time, we're extending the VFIO integration test to verify that
a VFIO device passed through a VM is still usable after some new memory
has been hotplugged.

Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
2020-03-27 09:35:39 +01:00
Damjan Georgievski
3b470d4f4b tests: add support for initramfs
the integration test creates an initramfs image based on AlpineLinux mini root filesystem
with a simple /init script that just echoes a string to the console. The string
is passed via the kernel cmdline as an environment variable.

Signed-off-by: Damjan Georgievski <gdamjan@gmail.com>
2020-03-26 11:59:03 +01:00
Rob Bradford
4b110d5b73 tests: Add integration test for hotplugging network device
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2020-03-25 17:58:06 +01:00
Hui Zhu
abbd69abee tests: Add integration test test_virtio_mem
Add integration test test_virtio_mem for virtio-mem.

Signed-off-by: Hui Zhu <teawater@antfin.com>
2020-03-25 15:54:16 +01:00
Rob Bradford
8d05fb86e3 tests: Add integration test for hotplugging pmem device
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2020-03-25 13:18:17 +01:00
Rob Bradford
96d4f1e39e tests: Add integration test for hotplugging disk device
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2020-03-25 09:35:53 +00:00
Sebastien Boeuf
c1e6d0022b ci: Add memory resizing use case to vhost-user tests
All vhost-user-blk, vhost-user-net and virtio-fs integration tests are
extended with memory resizing. The point is to validate that we can
hotplug some memory and keep these backends to work as expected.

Just a note that because memory resizing is not supported by mmio, we
limit these extensions to all non-mmio use cases.

Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
2020-03-24 19:01:15 +00:00
Sebastien Boeuf
890582b5a2 ci: Factorize kernel command line
The same Clear Linux kernel command line was repeated again and again in
the code. That's why this commit takes care of factorizing it, which
simplifies the code but also simplify maintenance whenever we'd need to
update the block UUID.

Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
2020-03-24 19:01:15 +00:00
Sebastien Boeuf
4de258477e ci: Fix mmio tests with direct kernel boot
The hypervisor-fw does not support virtio-blk through mmio transport
layer, therefore we can only run tests with mmio if these tests boot
directly to kernel.

Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
2020-03-24 19:01:15 +00:00
Sebastien Boeuf
f2682463a4 ci: Factorize integration tests booting from vhost-user-blk
Remove duplicated code for all boot related tests relying on
vhost-user-blk.

Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
2020-03-24 19:01:15 +00:00
Sebastien Boeuf
5a5b3cf23b ci: Factorize vhost-user-blk integration tests
All the non-boot related vhost-user-blk tests are factorized to remove
code duplication.

Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
2020-03-24 19:01:15 +00:00
Sebastien Boeuf
dd8debf201 ci: Run vhost-user-blk tests for mmio builds
There's no reason mmio builds cannot support vhost-user-blk, therefore
there's no reason to skip these tests for mmio.

Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
2020-03-24 19:01:15 +00:00
Sebastien Boeuf
0c9c72c583 ci: Unify vhost-user-blk integration tests
As a first step towards factorizing as many vhost-user-blk tests as
possible, this patch takes care of unifying their expected output.

It also makes a clear separation between the tests booting from
vhost-user-blk from the ones passing an extra volume.

Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
2020-03-24 19:01:15 +00:00
Sebastien Boeuf
c95851f48f ci: Run vhost-user-net tests for mmio transport
No reason to skip vhost-user-net integration tests for the mmio
transport build.

Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
2020-03-24 19:01:15 +00:00
Sebastien Boeuf
68293fc0e8 ci: Factorize vhost-user-net one step further
In order to limit code duplication, vhost-user-net integration tests are
further factorized, as they now include the self spawning test.

Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
2020-03-24 19:01:15 +00:00
Rob Bradford
bdcfe1efbd tests: Add "discard_writes" pmem test
Factorise test_virtio_pmem to test changes are not persisted if file is
readonly.

As virtio-mem is now supported in the upstream kernel we can switch to
using the firmware.

Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2020-03-20 14:46:34 +01:00
Rob Bradford
70986022d8 tests: Make the test_virtio_pmem test use a temporary file
Rather than using a raw OS disk image. This will be useful when the test
is extended to doing I/O on the image.

Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2020-03-20 14:46:34 +01:00
Rob Bradford
0788600702 build: Remove "pvh_boot" feature flag
This feature is stable and there is no need for this to be behind a
flag. This will also reduce the time needed to run the integration test
as we will not be running them all again under the flag.

Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2020-03-19 13:05:44 +00:00
Alejandro Jimenez
efb2447801 pvh: Add integration test to validate PVH boot
Add an integration test that builds cloud-hypervisor with
the pvh_boot feature and boots a kernel built with CONFIG_PVH.

Signed-off-by: Alejandro Jimenez <alejandro.j.jimenez@oracle.com>
2020-03-13 18:29:44 +01:00
Rob Bradford
abccf766ce tests: Use ch-remote to add/remove devices in test_vfio
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2020-03-12 12:56:10 +01:00
Rob Bradford
5c3ce9dd00 tests: Extend ch-remote helper to support optional single argument
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2020-03-12 12:56:10 +01:00
Sebastien Boeuf
34412c9b41 vmm: Add id option to VFIO hotplug
Add a new id option to the VFIO hotplug command so that it matches the
VFIO coldplug semantic.

This is done by refactoring the existing code for VFIO hotplug, where
VmAddDeviceData structure is replaced by DeviceConfig. This structure is
the one used whenever a VFIO device is coldplugged, which is why it
makes sense to reuse it for the hotplug codepath.

Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
2020-03-11 19:50:31 +01:00
Rob Bradford
911a2d61d7 tests: Use ch-remote to resize the VM
Remove manually constructed API request in the integration tests.

Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2020-03-11 08:22:09 +01:00
Sebastien Boeuf
f7277140bb ci: Add integration test for VFIO hot-unplug
Extend the existing test_vfio by unplugging the previously hotplugged
device.

Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
2020-03-10 17:05:06 +00:00
Rob Bradford
16fd506bb8 tests: Use new ch-remote for pause/resume integration test
Replace the use of a manual curl command with the new ch-remote tool.

Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2020-03-09 15:03:01 +00:00
Cathy Zhang
be6f91d0d1 tests: Refactoring vhost_user_net test cases
Signed-off-by: Cathy Zhang <cathy.zhang@intel.com>
2020-03-05 15:09:20 +00:00
Rob Bradford
42148063ec tests: Remove further use of sudo subshells
Replace sudo invocations of bash creating a subshell with simpler
solutions by running the program directly on the input or using tee.

Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2020-03-04 20:54:46 +01:00
Rob Bradford
2baf5ab80d tests: Simplfy the shm region check
There is no need to spawn a subshell in this case as grep can open the
file directly.

Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2020-03-04 20:54:46 +01:00
Rob Bradford
97affbebfe tests: Re-enable the virtio-fs tests and make them work with virtio-mmio
As part of bringing the tests up with virtio-mmio the virtio-fs were
wrongly disabled. Re-enable them and remove the cache size check as the
cache does not appear in /proc/iomem on virtio-mmio.

Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2020-03-04 20:54:46 +01:00
Rob Bradford
7b1d5c1ad9 tests: Remove entropy check from vhost-user-block test
When booting from vhost-user-block the entropy is sometimes lower
triggering a flaky test. We have already use other, more reliable
methods for checking that the VM has booted.

Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2020-03-04 20:54:46 +01:00
Sebastien Boeuf
1152b1a147 ci: Add VFIO hotplug integration test
This commit extends the existing test_vfio by hotplugging an extra
virtio-net device to the L2 VM. The test for validating the hotplug
succeeded is the same as the one to verify the non-hotplugged devices.

Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
2020-03-04 12:06:02 +00:00
Rob Bradford
22dd49d0b5 tests: Test virtio-fs with virtio-mmio
Now that virtio-mmio transport has support for SHM regions we should be
able to test virtio-fs against it.

Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2020-03-04 09:40:25 +01:00
Sebastien Boeuf
0223cf8c2b ci: Update ClearLinux image
A new ClearLinux image has been uploaded to the Azure storage account.
It is based off of the ClearLinux cloudguest image 31310 version, with
three extra bundles added to it.

First bundle is curl, which adds the curl binary to the image, second
bundle is iperf, adding the iperf binary to the image, and third bundle
is sysadmin-basic to include utility like netcat.

The image is 2G in size.

Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
2020-03-04 07:31:15 +00:00
Rob Bradford
5ade9d4610 tests: Remove unnecessary sleeps and kill on clean shutdown tests
On tests that expect a clean shutdown there is no need to try and kill
the child after wait() has returned as the process has already exited.
Further there is no need to sleep before wait() as wait will block until
the VM and VMM shutdown is complete.

Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2020-02-27 17:08:49 +00:00
Rob Bradford
c98949bdd3 tests: Wait for VMM to exit in test_serial_file/test_console_file
This should address any flakiness as the VMM process will have
completely terminated and all files closed.

Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2020-02-27 17:08:49 +00:00
Rob Bradford
2f58fb8307 tests: Test rebooting works for block self spawn test
Being able to reboot the VM is an important aspect of the self spawning
behaviour.

Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2020-02-27 17:08:49 +00:00
Rob Bradford
e817aa6824 tests: Improve VM shutdown behaviour
Many of the tests attempted to SSH into the VM and then run "shutdown"
but don't actually check that the VM has shutdown correctly and proceed
to kill the child process. Remove the associated SSH commands and sleeps
from those tests that are not explicitly checking the shutdown
behaviour.

Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2020-02-27 17:08:49 +00:00
Rob Bradford
559b70cf0a tests: Make output capture optional
Only some tests require the output for the tests to be captured so
default to not capturing the output to a pipe and instead make it
controllable.

Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2020-02-27 17:08:49 +00:00
Rob Bradford
dae7608b1e tests: Remove duplicated network configuration
Many of the tests use an identical network configuration. Add a
GuestCommand::default_net() to generate this configuration and use it
wherever possible.

Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2020-02-27 17:08:49 +00:00
Rob Bradford
6466ad2112 tests: Remove duplicated disk configuration
Many of the tests use an identical disk configuration. Add a
GuestCommand::default_disks() to generate this configuration and use it
wherever possible.

Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2020-02-27 17:08:49 +00:00
Rob Bradford
9f1ac24bed tests: Make the GuestCommand take a reference to the guest
This will be used fill out default parts of the guest command.

Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2020-02-27 17:08:49 +00:00
Rob Bradford
49e70c6203 tests: Port integration tests over to GuestCommand
Rather than creating the command itself delegate to the GuestCommand.

Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2020-02-27 17:08:49 +00:00
Rob Bradford
67a5882415 tests: Introduce new GuestCommand to handle launching the guest
This is a thin wrapper over std::process:Command which currently only
specifies the default binary but in future will handle more default
behaviour.

Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2020-02-27 17:08:49 +00:00
Rob Bradford
d7b0b9842d tests: Move integration tests to their own directory
Simplify main.rs by moving the integration tests to their own directory.

Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2020-02-25 10:42:54 +00:00