error: name `GPIOInterruptDisabled` contains a capitalized acronym
Error: --> devices/src/legacy/gpio_pl061.rs:46:5
|
46 | GPIOInterruptDisabled,
| ^^^^^^^^^^^^^^^^^^^^^ help: consider making the acronym lowercase, except the initial letter: `GpioInterruptDisabled`
|
= note: `-D clippy::upper-case-acronyms` implied by `-D warnings`
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#upper_case_acronyms
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
error: name `FinalizeTDX` contains a capitalized acronym
--> vmm/src/vm.rs:274:5
|
274 | FinalizeTDX(hypervisor::HypervisorVmError),
| ^^^^^^^^^^^ help: consider making the acronym lowercase, except the initial letter: `FinalizeTdx`
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#upper_case_acronyms
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Extend the existing url_to_path() to take the URL string and then use
that to simplify the snapshot/restore code paths.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
The MMIO structure contains the length rather than the maximum address
so it is necessary to subtract the starting address from the end address
to calculate the length.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Load the sections backed from the file into their required addresses in
memory and populate the HOB with details of the memory. Using the HOB
address initialize the TDX state in the vCPUs and finalize the TDX
configuration.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
When booting with TDX no kernel is supplied as the TDFV is responsible
for loading the OS. The requirement to have the kernel is still
currently enforced at the validation entry point; this change merely
changes function prototypes and stored state to use Option<> to support.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
When a vm is created with a pty device, on reboot the pty fd (sub
only) will only be associated with the vmm through the epoll event
loop. The fd being polled will have been closed due to the vm itself
dropping the pty files (and potentially reopening the fd index to a
different item making things quite confusing) and new pty fds will be
opened but not polled on for input.
This change creates a structure to encapsulate the information about
the pty fd (main File, sub File and the path to the sub File). On
reboot, a copy of the console and serial pty structs is then passed
down to the new Vm instance which will be used instead of creating a
new pty device.
This resolves the underlying issue from #2316.
Signed-off-by: William Douglas <william.r.douglas@gmail.com>
Update for clippy in Rust 1.50.0:
error: Unnecessary nested match
--> vmm/src/vm.rs:419:17
|
419 | / if let vm_device::BusError::MissingAddressRange = e {
420 | | warn!("Guest MMIO write to unregistered address 0x{:x}", gpa);
421 | | }
| |_________________^
|
= note: `-D clippy::collapsible-match` implied by `-D warnings`
help: The outer pattern can be modified to include the inner pattern.
--> vmm/src/vm.rs:418:17
|
418 | Err(e) => {
| ^ Replace this binding
419 | if let vm_device::BusError::MissingAddressRange = e {
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ with this pattern
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#collapsible_match
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Swap the last two parameters of guest_mem_{read,write} to be consistent
with other read / write functions.
Use more descriptive parameter names.
No functional change.
Signed-off-by: Wei Liu <liuwe@microsoft.com>
Add the ability for cloud-hypervisor to create, manage and monitor a
pty for serial and/or console I/O from a user. The reasoning for
having cloud-hypervisor create the ptys is so that clients, libvirt
for example, could exit and later re-open the pty without causing I/O
issues. If the clients were responsible for creating the pty, when
they exit the main pty fd would close and cause cloud-hypervisor to
get I/O errors on writes.
Ideally the main and subordinate pty fds would be kept in the main
vmm's Vm structure. However, because the device manager owns parsing
the configuration for the serial and console devices, the information
is instead stored in new fields under the DeviceManager structure
directly.
From there hooking up the main fd is intended to look as close to
handling stdin and stdout on the tty as possible (there is some future
work ahead for perhaps moving support for the pty into the
vmm_sys_utils crate).
The main fd is used for reading user input and writing to output of
the Vm device. The subordinate fd is used to setup raw mode and it is
kept open in order to avoid I/O errors when clients open and close the
pty device.
The ability to handle multiple inputs as part of this change is
intentional. The current code allows serial and console ptys to be
created and both be used as input. There was an implementation gap
though with the queue_input_bytes needing to be modified so the pty
handlers for serial and console could access the methods on the serial
and console structures directly. Without this change only a single
input source could be processed as the console would switch based on
its input type (this is still valid for tty and isn't otherwise
modified).
Signed-off-by: William Douglas <william.r.douglas@gmail.com>
This skeleton commit brings in the support for compiling aarch64 with
the "acpi" feature ready to the ACPI enabling. It builds on the work to
move the ACPI hotplug devices from I/O ports to MMIO and conditionalises
any code that is x86_64 only (i.e. because it uses an I/O port.)
Filling in the aarch64 specific details in tables such as the MADT it
out of the scope.
See: #2178
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Use the ACPI GED device to trigger a notitifcation of type
POWER_BUTTON_CHANGED which will ultimately lead to the guest being
notified.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Renamed this bitfield as it will also be used for non-hotplug purposes
such as synthesising a power button.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
When a device is ready to be activated signal to the VMM thread via an
EventFd that there is a device to be activated. When the VMM receives a
notification on the EventFd that there is a device to be activated
notify the device manager to attempt to activate any devices that have
not been activated.
As a side effect the VMM thread will create the virtio device threads.
Fixes: #1863
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
There are some code base and function which are purely KVM specific for
now and we don't have those supports in mshv at the moment but we have plan
for the future. We are doing a feature guard with KVM. For example, KVM has
mp_state, cpu clock support, which we don't have for mshv. In order to build
those code we are making the code base for KVM specific compilation.
Signed-off-by: Muminul Islam <muislam@microsoft.com>
When using an PIO write to 0x80 which is a special case handle that and
then return without going through the resolve.
This removes an extra warning that is reported.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
The DeviceNode cannot be fully represented as it embeds a Rust style
enum (i.e. with data) which is instead represented by a simple
associative array.
Fixes: #1167
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
This interface is used by the vCPU thread to delegate responsibility for
handling MMIO/PIO operations and to support different approaches than a
VM exit.
During profiling I found that we were spending 13.75% of the boot CPU
uage acquiring access to the object holding the VmmOps via
ArcSwap::load_full()
13.75% 6.02% vcpu0 cloud-hypervisor [.] arc_swap::ArcSwapAny<T,S>::load_full
|
---arc_swap::ArcSwapAny<T,S>::load_full
|
--13.43%--<hypervisor::kvm::KvmVcpu as hypervisor::cpu::Vcpu>::run
std::sys_common::backtrace::__rust_begin_short_backtrace
core::ops::function::FnOnce::call_once{{vtable-shim}}
std::sys::unix:🧵:Thread:🆕:thread_start
However since the object implementing VmmOps does not need to be mutable
and it is only used from the vCPU side we can change the ownership to
being a simple Arc<> that is passed in when calling create_vcpu().
This completely removes the above CPU usage from subsequent profiles.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
This allows code running in the VMM to access the VM's MemoryManager's
functionality for managing the dirty log including resetting it but also
generating a table.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Prior to sending the memory the full state is not needed only the
configuration. This is sufficient to create the appropriate structures
in the guest and have the memory allocations ready for filling.
Update the protocol documentation to add a separate config step and move
the state to after the memory is transferred. As the VM is created in a
separate step to restoring it the requires a slightly different
constructor as well as saving the VM object for the subsequent commands.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
This is tested by:
Source VMM:
target/debug/cloud-hypervisor --kernel ~/src/linux/vmlinux \
--pmem file=~/workloads/focal.raw --cpus boot=1 \
--memory size=2048M \
--cmdline"root=/dev/pmem0p1 console=ttyS0" --serial tty --console off \
--api-socket=/tmp/api1 -v
Destination VMM:
target/debug/cloud-hypervisor --api-socket=/tmp/api2 -v
And the following commands:
target/debug/ch-remote --api-socket=/tmp/api1 pause
target/debug/ch-remote --api-socket=/tmp/api2 receive-migration unix:/tmp/foo &
target/debug/ch-remote --api-socket=/tmp/api1 send-migration unix:/tmp/foo
target/debug/ch-remote --api-socket=/tmp/api2 resume
The VM is then responsive on the destination VMM.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
This allows the code to be reused when creating the VM from a snapshot
when doing VM migration.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
This also removes the need to lookup up the "exe" symlink for finding
the VMM executable path.
Fixes: #1925
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
The logic to handle AArch64 system event was: SHUTDOWN and RESET were
all treated as RESET.
Now we handle them differently:
- RESET event will trigger Vmm::vm_reboot(),
- SHUTDOWN event will trigger Vmm::vm_shutdown().
Signed-off-by: Michael Zhao <michael.zhao@arm.com>
Rather than filling the guest memory from a file at the point of the the
guest memory region being created instead fill from the file later. This
simplifies the region creation code but also adds flexibility for
sourcing the guest memory from a source other than an on disk file.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Now that we have a new dedicated way of asking for a balloon through the
CLI and the REST API, we can move all the balloon code to the device
manager. This allows us to simplify the memory manager, which is already
quite complex.
It also simplifies the behavior of the balloon resizing command. Instead
of providing the expected size for the RAM, which is complex when memory
zones are involved, it now expects the balloon size. This is a much more
straightforward behavior as it really resizes the balloon to the desired
size. Additionally to the simplication, the benefit of this approach is
that it does not need to be tied to the memory manager at all.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Before Virtio-mmio was removed, we passed an optional PCI space address
parameter to AArch64 code for generating FDT. The address is none if the
transport is MMIO.
Now Virtio-PCI is the only option, the parameter is mandatory.
Signed-off-by: Michael Zhao <michael.zhao@arm.com>
Virtio-mmio is removed, now virtio-pci is the only option for virtio
transport layer. We use MSI for PCI device interrupt. While GICv2, the
legacy interrupt controller, doesn't support MSI. So GICv2 is not very
practical for Cloud-hypervisor, we can remove it.
Signed-off-by: Michael Zhao <michael.zhao@arm.com>
If the user specified a maximum physical bits value through the
`max_phys_bits` option from `--cpus` parameter, the guest CPUID
will be patched accordingly to ensure the guest will find the
right amount of physical bits.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
If the user provided a maximum physical bits value for the vCPUs, the
memory manager will adapt the guest physical address space accordingly
so that devices are not placed further than the specified value.
It's important to note that if the number exceed what is available on
the host, the smaller number will be picked.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Run loop in hypervisor needs a callback mechanism to access resources
like guest memory, mmio, pio etc.
VmmOps trait is introduced here, which is implemented by vmm module.
While handling vcpuexits in run loop, this trait allows hypervisor
module access to the above mentioned resources via callbacks.
Signed-off-by: Praveen Paladugu <prapal@microsoft.com>
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
The virtio-balloon change the memory size is asynchronous.
VirtioBalloonConfig.actual of balloon device show current balloon size.
This commit add memory_actual_size to vm.info to show memory actual size.
Signed-off-by: Hui Zhu <teawater@antfin.com>
Write to the exit_evt EventFD which will trigger all the devices and
vCPUs to exit. This is slightly cleaner than just exiting the process as
any temporary files will be removed.
Fixes: #1242
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
The states of GIC should be part of the VM states. This commit
enables the AArch64 VM states save/restore by adding save/restore
of GIC states.
Signed-off-by: Henry Wang <Henry.Wang@arm.com>
Similarly as the VM booting process, on AArch64 systems,
the vCPUs should be created before the creation of GIC. This
commit refactors the vCPU save/restore code to achieve the
above-mentioned restoring order.
Signed-off-by: Henry Wang <Henry.Wang@arm.com>
In AArch64 systems, the state of GIC device can only be
retrieved from `KVM_GET_DEVICE_ATTR` ioctl. Therefore to implement
saving/restoring the GIC states, we need to make sure that the
GIC object (either the file descriptor or the device itself) can
be extracted after the VM is started.
This commit refactors the code of GIC creation by adding a new
field `gic_device_entity` in device manager and methods to set/get
this field. The GIC object can be therefore saved in the device
manager after calling `arch::configure_system`.
Signed-off-by: Henry Wang <Henry.Wang@arm.com>
virtio-mem device would use 'VIRTIO_MEM_F_ACPI_PXM' to add memory to NUMA
node, which MUST be existed, otherwise it will be assigned to node id 0,
even if user specify different node id.
According ACPI spec about Memory Affinity Structure, system hardware
supports hot-add memory region using 'Hot Pluggable | Enabled' flags.
Signed-off-by: Jiangbo Wu <jiangbo.wu@intel.com>
Based on all the preparatory work achieved through previous commits,
this patch updates the 'hotplugged_size' field for both MemoryConfig and
MemoryZoneConfig structures when either the whole memory is resized, or
simply when a memory zone is resized.
This fixes the lack of support for rebooting a VM with the right amount
of memory plugged in.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Now that e820 tables are created from the 'boot_guest_memory', we can
simplify the memory manager code by adding the virtio-mem regions when
they are created. There's no need to wait for the first hotplug to
insert these regions.
This also anticipates the need for starting a VM with some memory
already plugged into the virtio-mem region.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
In order to differentiate the 'boot' memory regions from the virtio-mem
regions, we store what we call 'boot_guest_memory'. This is useful to
provide the adequate list of regions to the configure_system() function
as it expects only the list of regions that should be exposed through
the e820 table.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Now that virtio-mem device accept a guest NUMA node as parameter, we
retrieve this information from the list of NUMA nodes. Based on the
memory zone associated with the virtio-mem device, we obtain the NUMA
node identifier, which we provide to the virtio-mem device.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Implement a new VM action called 'resize-zone' allowing the user to
resize one specific memory zone at a time. This relies on all the
preliminary work from the previous commits to resize each virtio-mem
device independently from each others.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
In order to anticipate the need for storing memory regions along with
virtio-mem information for each memory zone, we create a new structure
MemoryZone that will replace Vec<Arc<GuestRegionMmap>> in the hash map
MemoryZones.
This makes thing more logical as MemoryZones becomes a list of
MemoryZone sorted by their identifier.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
The goal of this commit is to rename the existing NUMA option 'id' with
'guest_numa_id'. This is done without any modification to the way this
option behaves.
The reason for the rename is caused by the observation that all other
parameters with an option called 'id' expect a string to be provided.
Because in this particular case we expect a u32 representing a proximity
domain from the ACPI specification, it's better to name it with a more
explicit name.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Based on the previous changes introducing new options for both memory
zones and NUMA configuration, this patch changes the behavior of the
NUMA node definition. Instead of relying on the memory zones to define
the guest NUMA nodes, everything goes through the --numa parameter. This
allows for defining NUMA nodes without associating any particular memory
range to it. And in case one wants to associate one or multiple memory
ranges to it, the expectation is to describe a list of memory zone
through the --numa parameter.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Based on the NumaConfig which now provides distance information, we can
internally update the list of NUMA nodes with the exact distances they
should be located from other nodes.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Relying on the list of CPUs defined through the NumaConfig, this patch
will update the internal list of CPUs attached to each NUMA node.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
There will be some cases where the implementation of the snapshot()
function from the Snapshottable trait will require to modify some
internal data, therefore we make this possible by updating the trait
definition with snapshot(&mut self).
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
This patch added the seccomp_filter module to the virtio-devices crate
by taking reference code from the vmm crate. This patch also adds
allowed-list for the virtio-block worker thread.
Partially fixes: #925
Signed-off-by: Bo Chen <chen.bo@intel.com>
This patch propagates the SeccompAction value from main to the
Vm struct constructor (i.e. Vm::new_from_memory_manager), so that we can
use it to construct the DeviceManager and CpuManager struct for
controlling the behavior of the seccomp filters for vcpu/virtio-device
worker threads.
Signed-off-by: Bo Chen <chen.bo@intel.com>
Shrink GICDevice trait to contain hypervisor agnostic API's only, which
are used in generating FDT.
Move all KVM specific logic into KvmGICDevice trait.
Signed-off-by: Michael Zhao <michael.zhao@arm.com>
SGX expects the EPC region to be reported as "reserved" from the e820
table. This patch adds a new entry to the table if SGX is enabled.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Instead of passing the GuestMemoryMmap directly to the CpuManager upon
its creation, it's better to pass a reference to the MemoryManager. This
way we will be able to know if SGX EPC region along with one or multiple
sections are present.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Based on the presence of one or multiple SGX EPC sections from the VM
configuration, the MemoryManager will allocate a contiguous block of
guest address space to hold the entire EPC region. Within this EPC
region, each EPC section is memory mapped.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
This commit store balloon size to MemoryConfig.
After reboot, virtio-balloon can use this size to inflate back to
the size before reboot.
Signed-off-by: Hui Zhu <teawater@antfin.com>
In order to move the hypervisor specific parts of the VM exit handling
path, we're defining a generic, hypervisor agnostic VM exit enum.
This is what the hypervisor's Vcpu run() call should return when the VM
exit can not be completely handled through the hypervisor specific bits.
For KVM based hypervisors, this means directly forwarding the IO related
exits back to the VMM itself. For other hypervisors that e.g. rely on the
VMM to decode and emulate instructions, this means the decoding itself
would happen in the hypervisor crate exclusively, and the rest of the VM
exit handling would be handled through the VMM device model implementation.
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Fix test_vm unit test by using the new abstraction and dropping some
dead code.
Signed-off-by: Wei Liu <liuwe@microsoft.com>
The fd naming is quite KVM specific. Since we're now using the
hypervisor crate abstractions, we can rename those into something more
readable and meaningful.
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Split the generic virtio code (queues and device type) from the
VirtioDevice trait, transport and device implementations.
This also simplifies the feature handling in vhost_user_backend as the
vm-virtio crate is no longer has any features.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Because we don't want the guest to miss any event triggered by the
emulation of devices, it is important to resume all vCPUs before we can
resume the DeviceManager with all its associated devices.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
When set_user_memory_region was moved to hypervisor crate, it was turned
into a safe function that wrapped around an unsafe call. All but one
call site had the safety statements removed. But safety statement was
not moved inside the wrapper function.
Add the safety statement back to help reasoning in the future. Also
remove that one last instance where the safety statement is not needed .
No functional change.
Signed-off-by: Wei Liu <liuwe@microsoft.com>
That removes one more KVM-ism in VMM crate.
Note that there are more KVM specific code in those files to be split
out, but we're not at that stage yet.
No functional change.
Signed-off-by: Wei Liu <liuwe@microsoft.com>
Collate the virtio device counters in DeviceManager for each device that
exposes any and expose it through the recently added HTTP API.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
The counters are a hash of device name to hash of counter name to u64
value. Currently the API is only implemented with a stub that returns an
empty set of counters.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
In order to maintain correct time when doing pause/resume and
snapshot/restore operations, this patch stores the clock value
on pause, and restore it on resume. Because snapshot/restore
expects a VM to be paused before the snapshot and paused after
the restore, this covers the migration use case too.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Because we need to pause the VM before it is snapshot, it should be
restored in a paused state to keep the sequence symmetrical. That's the
reason why the state machine regarding the valid VM's state transition
needed to be updated accordingly.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Start moving the vmm, arch and pci crates to being hypervisor agnostic
by using the hypervisor trait and abstractions. This is not a complete
switch and there are still some remaining KVM dependencies.
Signed-off-by: Muminul Islam <muislam@microsoft.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
This patch completes the series by connecting the dots between the HTTP
frontend and the device manager backend.
Any request to hotplug a VFIO, disk, fs, pmem, net, or vsock device will
now return a response including the device name and the place of the
device in the PCI topology.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Pass from the device manager to the calling code the information about
the PCI device that has just been hotplugged.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Now the flow of both architectures are aligned to:
1. load kernel
2. create VCPU's
3. configure system
4. start VCPU's
Signed-off-by: Michael Zhao <michael.zhao@arm.com>
Between X86 and AArch64, there is some difference in booting a VM:
- X86_64 can setup IOAPIC before creating any VCPU.
- AArch64 have to create VCPU's before creating GIC.
The old process is:
1. load_kernel()
load kernel binary
configure system
2. activate_vcpus()
create & start VCPU's
So we need to separate "activate_vcpus" into "create_vcpus" and
"activate_vcpus" (to start vcpus only). Setup GIC and create FDT
between the 2 steps.
The new procedure is:
1. load_kernel()
load kernel binary
(X86_64) configure system
2. create VCPU's
3. (AArch64) setup GIC
4. (AArch64) configure system
5. start VCPU's
Signed-off-by: Michael Zhao <michael.zhao@arm.com>
This is a preparing commit to build and test CH on AArch64. All building
issues were fixed, but no functionality was introduced.
For X86, the logic of code was not changed at all.
For ARM, the architecture specific part is still empty. And we applied
some tricks to workaround lint warnings. But such code will be replaced
later by other commits with real functionality.
Signed-off-by: Michael Zhao <michael.zhao@arm.com>
The ch branch has been rebased to incorporate the latest upstream code
requiring a small change to the unit tests.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
To ensure that the DeviceManager threads (such as those used for virtio
devices) are cleaned up it is necessary to unpark them so that they get
cleanly terminated as part of the shutdown.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
In case the VM is created from scratch, the devices should be created
after the DeviceManager has been created. But this should not affect the
restore codepath, as in this case the devices should be created as part
of the restore() function.
It's necessary to perform this differentiation as the restore must go
through the following steps:
- Create the DeviceManager
- Restore the DeviceManager with the right state
- Create the devices based on the restored DeviceManager's device tree
- Restore each device based on the restored DeviceManager's device tree
That's why this patch leverages the recent split of the DeviceManager's
creation to achieve what's needed.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
This commit performs the split of the DeviceManager's creation into two
separate functions by moving anything related to device's creation after
the DeviceManager structure has been initialized.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
If the current state is paused that means most of the handles got killed by pthread_kill
We need to unpark those threads to make the shutdown worked. Otherwise
The shutdown API hangs and the API is not responding afterwards. So
before the shutdown call we need to resume the VM make it succeed.
Fixes: #817
Signed-off-by: Muminul Islam <muislam@microsoft.com>
Adds DeviceManager method `make_virtio_fs_device` which creates a single
device, and modifies `make_virtio_fs_devices` to use this method.
Implements the new `vm.add-fs route`.
Signed-off-by: Dean Sheather <dean@coder.com>
We can now allow guests that specify an initramfs to boot
using the PVH boot protocol.
Signed-off-by: Alejandro Jimenez <alejandro.j.jimenez@oracle.com>
When performing an API boot validate the configuration. For now only
some very basic validation is performed but in subsequent commits
the validation will be extended.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Now that the restore path uses RestoreConfig structure, we add a new
parameter called "prefault" to it. This will give the user the ability
to populate the pages corresponding to the mapped regions backed by the
snapshotted memory files.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
The goal here is to move the restore parameters into a dedicated
structure that can be reused from the entire codebase, making the
addition or removal of a parameter easier.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
When CoW can be used, the VM restoration time is reduced, but the pages
are not populated. This can lead to some slowness from the guest when
accessing these pages.
Depending on the use case, we might prefer a slower boot time for better
performances from guest runtime. The way to achieve this is to prefault
the pages in this case, using the MAP_POPULATE flag along with CoW.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Whenever a MemoryManager is restored from a snapshot, the memory regions
associated with it might need to directly back the mapped memory for
increased performances. If that's the case, a list of external regions
is provided and the MemoryManager should simply ignore what's coming
from the MemoryConfig.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
The MemoryManager is somehow a special case, as its restore() function
was not implemented as part of the Snapshottable trait. Instead, and
because restoring memory regions rely both on vm.json and every memory
region snapshot file, the memory manager is restored at creation time.
This makes the restore path slightly different from CpuManager, Vcpu,
DeviceManager and Vm, but achieve the correct restoration of the
MemoryManager along with its memory regions filled with the correct
content.
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
This is only implementing the send() function in order to store all Vm
states into a file.
This needs to be extended for live migration, by adding more transport
methods, and also the recv() function must be implemented.
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
By aggregating snapshots from the CpuManager, the MemoryManager and the
DeviceManager, Vm implements the snapshot() function from the
Snapshottable trait.
And by restoring snapshots from the CpuManager, the MemoryManager and
the DeviceManager, Vm implements the restore() function from the
Snapshottable trait.
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: Yi Sun <yi.y.sun@linux.intel.com>
Implement the Snapshottable trait for Vcpu, and then implements it for
CpuManager. Note that CpuManager goes through the Snapshottable
implementation of Vcpu for every vCPU in order to implement the
Snapshottable trait for itself.
Signed-off-by: Yi Sun <yi.y.sun@linux.intel.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
A Snapshottable component can snapshot itself and
provide a MigrationSnapshot payload as a result.
A MigrationSnapshot payload is a map of component IDs to a list of
migration sections (MigrationSection). As component can be made of
several Migratable sub-components (e.g. the DeviceManager and its
device objects), a migration snapshot can be made of multiple snapshot
itself.
A snapshot is a list of migration sections, each section being a
component state snapshot. Having multiple sections allows for easier and
backward compatible migration payload extensions.
Once created, a migratable component snapshot may be transported and this
is what the Transportable trait defines, through 2 methods: send and recv.
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: Yi Sun <yi.y.sun@linux.intel.com>
Whenever the memory is resized, it's important to retrieve the new
region to pass it down to the device manager, this way it can decide
what to do with it.
Also, there's no need to use a boolean as we can instead use an Option
to carry the information about the region. In case of virtio-mem, there
will be no region since the whole memory has been reserved up front by
the VMM at boot. This means only the ACPI hotplug will return a region
and is the only method that requires the memory to be updated from the
device manager.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Commit 2adddce2 reorganized the crate for a cleaner multi architecture
(x86_64 and aarch64) support.
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
For now, the codebase does not support booting from initramfs with PVH
boot protocol, therefore we need to fallback to the legacy boot.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
* load the initramfs File into the guest memory, aligned to page size
* finally setup the initramfs address and its size into the boot params
(in configure_64bit_boot)
Signed-off-by: Damjan Georgievski <gdamjan@gmail.com>
The persistent memory will be hotplugged via DeviceManager and saved in
the config for later use.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
This commit adds new option hotplug_method to memory config.
It can set the hotplug method to "acpi" or "virtio-mem".
Signed-off-by: Hui Zhu <teawater@antfin.com>
The persistent memory will be hotplugged via DeviceManager and saved in
the config for later use.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Whenever the VM memory is resized, DeviceManager needs to be notified
so that it can subsequently notify each virtio devices about it.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
This feature is stable and there is no need for this to be behind a
flag. This will also reduce the time needed to run the integration test
as we will not be running them all again under the flag.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
I spent a few minutes trying to understand why we were unconditionally
updating the VM config memory size, even if the guest memory resizing
did not happen.
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Fill the hvm_start_info and related memory map structures as
specified in the PVH boot protocol. Write the data structures
to guest memory at the GPA that will be stored in %rbx when
the guest starts.
Signed-off-by: Alejandro Jimenez <alejandro.j.jimenez@oracle.com>
In order to properly initialize the kvm regs/sregs structs for
the guest, the load_kernel() return type must specify which
boot protocol to use with the entry point address it returns.
Make load_kernel() return an EntryPoint struct containing the
required information. This structure will later be used
in the vCPU configuration methods to setup the appropriate
initial conditions for the guest.
Signed-off-by: Alejandro Jimenez <alejandro.j.jimenez@oracle.com>
Add a new id option to the VFIO hotplug command so that it matches the
VFIO coldplug semantic.
This is done by refactoring the existing code for VFIO hotplug, where
VmAddDeviceData structure is replaced by DeviceConfig. This structure is
the one used whenever a VFIO device is coldplugged, which is why it
makes sense to reuse it for the hotplug codepath.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
