Commit Graph

870 Commits

Author SHA1 Message Date
Bo Chen
896b9a1d4b virtio-devices: seccomp: Add seccomp filter for vhost_net_ctl thread
This patch enables the seccomp filters for the vhost_net_ctl worker thread.

Partially fixes: #925

Signed-off-by: Bo Chen <chen.bo@intel.com>
2020-08-19 08:33:58 +02:00
Bo Chen
02d63149fe virtio-devices: seccomp: Add seccomp filters for vhost_fs thread
This patch enables the seccomp filters for the vhost_fs worker thread.

Partially fixes: #925

Signed-off-by: Bo Chen <chen.bo@intel.com>
2020-08-19 08:33:58 +02:00
Bo Chen
c82ded8afa virtio-devices: seccomp: Add seccomp filters for balloon thread
This patch enables the seccomp filters for the balloon worker thread.

Partially fixes: #925

Signed-off-by: Bo Chen <chen.bo@intel.com>
2020-08-19 08:33:58 +02:00
Bo Chen
c460178723 virtio-devices: seccomp: Add seccomp filters for mem thread
This patch enables the seccomp filters for the mem worker thread.

Partially fixes: #925

Signed-off-by: Bo Chen <chen.bo@intel.com>
2020-08-19 08:33:58 +02:00
Bo Chen
4539236690 virtio-devices: seccomp: Add seccomp filters for iommu thread
This patch enables the seccomp filters for the iommu worker thread.

Partially fixes: #925

Signed-off-by: Bo Chen <chen.bo@intel.com>
2020-08-17 21:08:49 +02:00
Anatol Belski
eba42c392f devices: acpi: Add UID to devices with common HID
Some OS might check for duplicates and bail out, if it can't create a
distinct mapping. According to ACPI 5.0 section 6.1.12, while _UID is
optional, it becomes required when there are multiple devices with the
same _HID.

Signed-off-by: Anatol Belski <ab@php.net>
2020-08-14 08:52:02 +02:00
Sebastien Boeuf
bdef54ead6 vmm: Add brk syscall to the API thread
The brk syscall is not always called as the system might not need it.
But when it's needed from the API thread, this causes the thread to
terminate as it is not part of the authorized list of syscalls.

This should fix some sporadic failures on the CI with the musl build.

Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
2020-08-11 15:04:21 +01:00
Jose Carlos Venegas Munoz
90acb01bad vmm: seccomp: add mprotect to API thread filter
Add mprotect to API thread rules. Prevent the VMM is
killed when it is used.

Signed-off-by: Jose Carlos Venegas Munoz <jose.carlos.venegas.munoz@intel.com>
2020-08-05 21:35:21 +01:00
Bo Chen
dc71d2765a virtio-devices: seccomp: Add seccomp filters for pmem thread
This patch enables the seccomp filters for the pmem worker thread.

Partially fixes: #925

Signed-off-by: Bo Chen <chen.bo@intel.com>
2020-08-05 08:13:31 +01:00
Bo Chen
d77977536d virtio-devices: seccomp: Add seccomp filters for net thread
This patch enables the seccomp filters for the net worker thread.

Partially fixes: #925

Signed-off-by: Bo Chen <chen.bo@intel.com>
2020-08-05 08:13:31 +01:00
Bo Chen
276df6b71c virtio-devices: seccomp: Add seccomp filters for console thread
This patch enables the seccomp filters for the console worker thread.

Partially fixes: #925

Signed-off-by: Bo Chen <chen.bo@intel.com>
2020-08-05 08:13:31 +01:00
Bo Chen
a426221167 virtio-devices: seccomp: Add seccomp filters for rng thread
This patch enables the seccomp filters for the rng worker thread.

Partially fixes: #925

Signed-off-by: Bo Chen <chen.bo@intel.com>
2020-08-05 08:13:31 +01:00
Bo Chen
704edd544c virtio-devices: seccomp: Add seccomp_filter module
This patch added the seccomp_filter module to the virtio-devices crate
by taking reference code from the vmm crate. This patch also adds
allowed-list for the virtio-block worker thread.

Partially fixes: #925

Signed-off-by: Bo Chen <chen.bo@intel.com>
2020-08-04 11:40:49 +02:00
Bo Chen
ff7ed8f628 vmm: Propagate the SeccompAction value to the Vm struct constructor
This patch propagates the SeccompAction value from main to the
Vm struct constructor (i.e. Vm::new_from_memory_manager), so that we can
use it to construct the DeviceManager and CpuManager struct for
controlling the behavior of the seccomp filters for vcpu/virtio-device
worker threads.

Signed-off-by: Bo Chen <chen.bo@intel.com>
2020-08-04 11:40:49 +02:00
Bo Chen
8e74637ebb main, vmm: seccomp: Add the '--seccomp log' option
This patch extends the CLI option '--seccomp' to accept the 'log'
parameter in addition 'true/false'. It also refactors the
vmm::seccomp_filters module to support both "SeccompAction::Trap" and
"SeccompAction::Log".

Fixes: #1180

Signed-off-by: Bo Chen <chen.bo@intel.com>
2020-08-04 11:40:49 +02:00
Bo Chen
b41884a406 main, vmm: seccomp: Use SeccompAction instead of SeccompLevel
This patch replaces the usage of 'SeccompLevel' with 'SeccompAction',
which is the first step to support the 'log' action over system
calls that are not on the allowed list of seccomp filters.

Signed-off-by: Bo Chen <chen.bo@intel.com>
2020-08-04 11:40:49 +02:00
Sebastien Boeuf
8f0bf82648 io_uring: Add new feature gate
By adding a new io_uring feature gate, we let the user the possibility
to choose if he wants to enable the io_uring improvements or not.
Since the io_uring feature depends on the availability on recent host
kernels, it's better if we leave it off for now.

As soon as our CI will have support for a kernel 5.6 with all the
features needed from io_uring, we'll enable this feature gate
permanently.

Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
2020-08-03 14:15:01 +01:00
Sebastien Boeuf
917027c55b vmm: Rely on virtio-blk io_uring when possible
In case the host supports io_uring and the specific io_uring options
needed, the VMM will choose the asynchronous version of virtio-blk.
This will enable better I/O performances compared to the default
synchronous version.

This is also important to note the VMM won't be able to use the
asynchronous version if the backend image is in QCOW format.

Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
2020-08-03 14:15:01 +01:00
Praveen Paladugu
afa8ecc90c vmm: add validation for network parameters
Signed-off-by: Praveen Paladugu <prapal@microsoft.com>
2020-07-31 09:07:12 +02:00
Wei Liu
a52b614a61 vmm: device_manager: console input should be only consumed by one device
Cloud Hypervisor allows either the serial or virtio console to output to
TTY, but TTY input is pushed to both.

This is not correct. When Linux guest is configured to spawn TTYs on
both ttyS0 and hvc0, the user effectively issues the same commands twice
in different TTYs.

Fix this by only direct input to the one choice that is using host side
TTY.

Signed-off-by: Wei Liu <liuwe@microsoft.com>
2020-07-30 18:05:01 +02:00
Wei Liu
5ed794a44c vmm: device_manager: rename console_input to virtio_console_input
Signed-off-by: Wei Liu <liuwe@microsoft.com>
2020-07-30 18:05:01 +02:00
Wei Liu
3e68867bb7 vmm: device_manager: eliminate KvmMsiInterruptManager from the new function
The logic to create an MSI interrupt manager is applicable to Hyper-V as
well.

Signed-off-by: Wei Liu <liuwe@microsoft.com>
2020-07-30 08:00:33 +02:00
Wei Liu
218ec563fc vmm: fix warnings when KVM is not enabled
Some imports are only used by KVM. Some variables and code become dead
or unused when KVM is not enabled.

Signed-off-by: Wei Liu <liuwe@microsoft.com>
2020-07-28 21:08:39 +01:00
Jianyong Wu
d24b110519 seccomp: AArch64: Add SYS_unlinkat to seccomp whitelist
This commit fixes an "Bad syscall" error when shutting down the VM
on AArch64 by adding the SYS_unlinkat syscall to the seccomp
whitelist.

Signed-off-by: Jianyong Wu <jianyong.wu@arm.com>
2020-07-27 07:25:07 +00:00
Rob Bradford
9ae44aeada vmm: acpi_tables: Fix PM timer I/O port width
Ensure that the width of the I/O port is correctly set to 32-bits in the
generic address used for the X_PM_TMR_BLK. Do this by type
parameterising GenericAddress::io_port_address() fuction.

TEST=Boot with clocksource=acpi_pm and observe no errors in the dmesg.

Fixes: #1496

Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2020-07-23 17:48:22 +02:00
Rob Bradford
aae5d988e1 devices: vmm: Add ACPI PM timer
This is a counter exposed via an I/O port that runs at 3.579545MHz. Here
we use a hardcoded I/O and expose the details through the FADT table.

TEST=Boot Linux kernel and see the following in dmesg:

[    0.506198] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns

Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2020-07-23 13:10:21 +01:00
Wei Liu
f03afea0d6 device_manager: document unsafe block in add_vfio_device
It is not immediately obvious why the conversion is safe. Document the
safety guarantee.

Signed-off-by: Wei Liu <liuwe@microsoft.com>
2020-07-21 17:13:10 +01:00
Samuel Ortiz
be51ea250d device_manager: Simplify the passthrough internal API
We store the device passthrough handler, so we should use it through our
internal API and only carry the passed through device configuration.

Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2020-07-21 17:20:25 +02:00
Michael Zhao
ddf1b76906 hypervisor: Refactor create_passthrough_device() for generic type
Changed the return type of create_passthrough_device() to generic type
hypervisor::Device.

Signed-off-by: Michael Zhao <michael.zhao@arm.com>
2020-07-21 16:22:02 +02:00
Michael Zhao
e3e771727a arch: Refactor GIC code to seperate KVM specific code
Shrink GICDevice trait to contain hypervisor agnostic API's only, which
are used in generating FDT.
Move all KVM specific logic into KvmGICDevice trait.

Signed-off-by: Michael Zhao <michael.zhao@arm.com>
2020-07-21 16:22:02 +02:00
Michael Zhao
3e051e7b2c arch, vmm: Enable initramfs on AArch64
Ported Firecracker commit 144b6c.

Signed-off-by: Michael Zhao <michael.zhao@arm.com>
2020-07-20 14:20:53 +01:00
Wei Liu
e1af251c9f vmm, hypervisor: adjust set_gsi_routing / set_gsi_routes
Make set_gsi_routing take a list of IrqRoutingEntry. The construction of
hypervisor specific structure is left to set_gsi_routing.

Now set_gsi_routes, which is part of the interrupt module, is only
responsible for constructing a list of routing entries.

This further splits hypervisor specific code from hypervisor agnostic
code.

Signed-off-by: Wei Liu <liuwe@microsoft.com>
2020-07-20 07:32:32 +02:00
Wei Liu
d484a3383c vmm: device_manager: introduce add_passthrough_device
It calls add_vfio_device on KVM or returns an error when not running on
KVM.

Signed-off-by: Wei Liu <liuwe@microsoft.com>
2020-07-17 20:21:39 +02:00
Wei Liu
821892419c vmm: device_manager: use generic names for passthrough device
Signed-off-by: Wei Liu <liuwe@microsoft.com>
2020-07-17 20:21:39 +02:00
Wei Liu
ff8d7bfe83 hypervisor: add create_passthrough_device call to Vm trait
That function is going to return a handle for passthrough related
operations.

Move create_kvm_device code there.

Signed-off-by: Wei Liu <liuwe@microsoft.com>
2020-07-17 20:21:39 +02:00
Wei Liu
c08d2b2c70 device_manager: avoid manipulating MemoryRegion fields directly
Hyper-V may have different field names. Use make_user_memory_region
instead.

No functional change.

Signed-off-by: Wei Liu <liuwe@microsoft.com>
2020-07-16 15:56:03 +02:00
Wei Liu
d80e383dbb arch: move test cases to vmm crate
This saves us from adding a "kvm" feature to arch crate merely for the
purpose of running tests.

Signed-off-by: Wei Liu <liuwe@microsoft.com>
2020-07-15 17:21:07 +02:00
Wei Liu
598eaf9f86 vmm: use hypervisor::new in test_vm
Signed-off-by: Wei Liu <liuwe@microsoft.com>
2020-07-15 17:21:07 +02:00
Sebastien Boeuf
a5c4f0fc6f arch, vmm: Add e820 entry related to SGX EPC region
SGX expects the EPC region to be reported as "reserved" from the e820
table. This patch adds a new entry to the table if SGX is enabled.

Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
2020-07-15 15:08:56 +02:00
Sebastien Boeuf
e10d9b13d4 arch, hypervisor, vmm: Patch CPUID subleaves to expose EPC sections
The support for SGX is exposed to the guest through CPUID 0x12. KVM
passes static subleaves 0 and 1 from the host to the guest, without
needing any modification from the VMM itself.

But SGX also relies on dynamic subleaves 2 through N, used for
describing each EPC section. This is not handled by KVM, which means
the VMM is in charge of setting each subleaf starting from index 2
up to index N, depending on the number of EPC sections.

These subleaves 2 through N are not listed as part of the supported
CPUID entries from KVM. But it's important to set them as long as index
0 and 1 are present and indicate that SGX is supported.

Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
2020-07-15 15:08:56 +02:00
Sebastien Boeuf
1603786374 vmm: Pass MemoryManager through CpuManager creation
Instead of passing the GuestMemoryMmap directly to the CpuManager upon
its creation, it's better to pass a reference to the MemoryManager. This
way we will be able to know if SGX EPC region along with one or multiple
sections are present.

Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
2020-07-15 15:08:56 +02:00
Sebastien Boeuf
2b06ce0ed4 vmm: Add EPC device to ACPI tables
The SGX EPC region must be exposed through the ACPI tables so that the
guest can detect its presence. The guest only get the full range from
ACPI, as the specific EPC sections are directly described through the
CPUID of each vCPU.

Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
2020-07-15 15:08:56 +02:00
Sebastien Boeuf
84cf12d86a arch, vmm: Create SGX virtual EPC sections from MemoryManager
Based on the presence of one or multiple SGX EPC sections from the VM
configuration, the MemoryManager will allocate a contiguous block of
guest address space to hold the entire EPC region. Within this EPC
region, each EPC section is memory mapped.

Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
2020-07-15 15:08:56 +02:00
Sebastien Boeuf
d9244e9f4c vmm: Add option for enabling SGX EPC regions
Introducing the new CLI option --sgx-epc along with the OpenAPI
structure SgxEpcConfig, so that a user can now enable one or multiple
SGX Enclave Page Cache sections within a contiguous region from the
guest address space.

Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
2020-07-15 15:08:56 +02:00
Michael Zhao
cce6237536 pci: Enable GSI routing (MSI type) for AArch64
In this commit we saved the BDF of a PCI device and set it to "devid"
in GSI routing entry, because this field is mandatory for GICv3-ITS.

Signed-off-by: Michael Zhao <michael.zhao@arm.com>
2020-07-14 14:34:54 +01:00
Michael Zhao
f2e484750a arch: aarch64: Add PCIe node in FDT for AArch64
Signed-off-by: Michael Zhao <michael.zhao@arm.com>
2020-07-14 14:34:54 +01:00
Michael Zhao
17057a0dd9 vmm: Fix build errors with "pci" feature on AArch64
Signed-off-by: Michael Zhao <michael.zhao@arm.com>
2020-07-14 14:34:54 +01:00
Rob Bradford
4963e37dc8 qcow, virtio-devices: Break cyclic dependency
Move the definition of RawFile from virtio-devices crate into qcow
crate. All the code that consumes RawFile also already depends on the
qcow crate for image file type detection so this change breaks the
need for the qcow crate to depend on the very large virtio-devices
crate.

Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2020-07-10 17:47:31 +02:00
Hui Zhu
800220acbb virtio-balloon: Store the balloon size to support reboot
This commit store balloon size to MemoryConfig.
After reboot, virtio-balloon can use this size to inflate back to
the size before reboot.

Signed-off-by: Hui Zhu <teawater@antfin.com>
2020-07-07 17:25:13 +01:00
Hui Zhu
8ffbc3d031 vmm: api: ch-remote: Add balloon to VmResizeData
Signed-off-by: Hui Zhu <teawater@antfin.com>
2020-07-07 17:25:13 +01:00