Given the virtio-console is now able to buffer its output when no PTY is
connected on the other end, the device manager code is updated to enable
this. Moving the endpoint type from FilePair to PtyPair enables the
proper codepath in the virtio-console implementation, as well as
updating the PTY resize code, and forcing the PTY to always be
non-blocking.
The non-blocking behavior is required to avoid blocking the guest that
would be waiting on the virtio-console driver. When receiving an
EWOULDBLOCK error, the output will simply be redirected to the temporary
buffer so that it can be later flushed.
The PTY resize logic has been slightly modified to ensure the PTY file
descriptors are closed. It avoids the child process to keep a hold onto
the PTY device, which would have caused the PTY to believe something is
connected on the other end, which would have prevented the detection of
any new connection on the PTY.
Fixes#4521
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
We want to be able to reuse the SerialBuffer from the virtio-devices
crate, particularly from the virtio-console implementation. That's why
we move the SerialBuffer definition to its own crate so that it can be
accessed from both vmm and virtio-devices crates, without creating any
cyclic dependency.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
If the epoll_wait() call returns EINTR, this only means a signal has
been delivered before any of the file descriptors registered triggered
an event or before the end of the timeout (if timeout isn't -1). For
that reason, we should simply try to listen on the epoll loop again.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
We must limit how much the buffer can grow, otherwise this could lead
the process to consume all the memory on the machine. This could happen
if the output from the guest was very important and nothing would
connect to the PTY for a long time.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Set the maximum number of HW breakpoints according to the value returned
from `Hypervisor::get_guest_debug_hw_bps()`.
Signed-off-by: Michael Zhao <michael.zhao@arm.com>
On AArch64, `translate_gva` API is not provided by KVM. We implemented
it in VMM by walking through translation tables.
Address translation is big topic, here we only focus the scenario that
happens in VMM while debugging kernel. This `translate_gva`
implementation is restricted to:
- Exception Level 1
- Translate high address range only (kernel space)
This implementation supports following Arm-v8a features related to
address translation:
- FEAT_LPA
- FEAT_LVA
- FEAT_LPA2
The implementation supports page sizes of 4KiB, 16KiB and 64KiB.
Signed-off-by: Michael Zhao <michael.zhao@arm.com>
The goal of this patch is to provide a reliable way to detect when the
other end of the PTY is connected, and therefore be able to identify
when we can write to the PTY device. This is needed because writing to
the PTY device when the other end isn't connected causes the loss of
the written bytes.
The way to detect the connection on the other end of the PTY is by
knowing the other end is disconnected at first with the presence of the
EPOLLHUP event. Later on, when the connection happens, EPOLLHUP is not
triggered anymore, and that's when we can assume it's okay to write to
the PTY main device.
It's important to note we had to ensure the file descriptor for the
other end was closed, otherwise we would have never seen the EPOLLHUP
event. And we did so by removing the "sub" field from the PtyPair
structure as it was keeping the associated File opened.
Fixes#3170
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Since our firmware files are still designed to be used via PVH use the
load_kernel() function to load the firmware falling back to legacy
firmware loading if necessary.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Adding new I/O ports for both the ACPI shutdown and the ACPI PM timer
devices so they can be triggered from both addresses. The reason for
this change is that TDX expects only certain I/O ports to be enabled
based on what QEMU exposes. We follow this to avoid new ports from being
opened exclusively for Cloud Hypervisor.
We have to keep the former I/O ports available given all firmwares
haven't been updated yet. Once we reach a point where we know both Rust
Hypervisor Firmware, OVMF, TDVF and TDSHIM have been updated with the
new port values, we'll be able to remove the former ports.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
The old API remains usable, and will remain usable for two releases but
we should only advertise the new API.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Introduce a new top level member of VmConfig called PayloadConfig that
(currently) encompasses the kernel, commandline and initramfs for the
guest to use.
In future this can be extended for firmware use. The existing
"--kernel", "--cmdline" and "initramfs" CLI parameters now fill the
PayloadConfig.
Any config supplied which uses the now deprecated config members have
those members mapped to the new version with a warning.
See: #4445
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
By checking in the validation logic we get checking for both devices
specified in the initial config but also hotplug too.
Fixes: #4453
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
The uuid indicates the unique ID of a virtual machine.
cloud-hypervisor takes the uuid passed by libvirt
and uses it to initialize cloud-init.
Signed-off-by: lizhaoxin1 <Lxiaoyouling@163.com>
The parameter "poll_queue" was useful at the time Cloud Hypervisor was
responsible for spawning vhost-user backends, as it was carrying the
information the vhost-user-block backend should have this option enabled
or not.
It's been quite some time that we walked away from this design, as we
now expect a management layer to be responsible for running vhost-user
backends.
That's the reason why we can remove "poll_queue" from the DiskConfig
structure.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
The new virtio-queue version introduced some breaking changes which need
to be addressed so that Cloud Hypervisor can still work with this
version.
The most important change is about removing a handle to the guest memory
from the Queue, meaning the caller has to provide the guest memory
handle for multiple methods from the QueueT trait.
One interesting aspect is that QueueT has been widely extended to
provide every getter and setter we need to access and update the Queue
structure without having direct access to its internal fields.
This patch ports all the virtio and vhost-user devices to this new crate
definition. It also updates both vhost-user-block and vhost-user-net
backends based on the updated vhost-user-backend crate. It also updates
the fuzz directory.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
When starting the VM such that it is already on a breakpoint (via
stop_on_boot) when attached to gdb then start the vCPUs in a paused
state rather than starting the vCPUs later (upon resume).
Further, make the resumption/break of the VM more resilient by only
attempting to resume the vCPUs if were are already in a break point and
only attempting to pause/break if we were already running.
Fixes: #4354
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Remove the hardcoded addresses.
Also remove PM_TMR_BLK as spec compliant implementation will use
X_PM_TMR_BLK over this field.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
The original code uses kvm_device_attr directly outside of the
hyeprvisor crate. That leaks hypervisor details.
No functional change intended.
Signed-off-by: Wei Liu <liuwe@microsoft.com>
This requires making get/set_lapic_reg part of the type.
For the moment we cannot provide a default variant for the new type,
because picking one will be wrong for the other hypervisor, so I just
drop the test cases that requires LapicState::default().
Signed-off-by: Wei Liu <liuwe@microsoft.com>
CpuId is an alias type for the flexible array structure type over
CpuIdEntry. The type itself and the type of the element in the array
portion are tied to the underlying hypervisor.
Switch to using CpuIdEntry slice or vector directly. The construction of
CpuId type is left to hypervisors.
This allows us to decouple CpuIdEntry from hypervisors more easily.
No functional change intended.
Signed-off-by: Wei Liu <liuwe@microsoft.com>
We only need to do this for x86 since MSHV does not have aarch64 support
yet. This reduces unnecessary code churn.
Signed-off-by: Wei Liu <liuwe@microsoft.com>
VmState was introduced to hold hypervisor specific VM state. KVM does
not need it and MSHV does not really use it yet.
Just drop the code. It can be easily revived once there is a need.
Signed-off-by: Wei Liu <liuwe@microsoft.com>
Previously, we were assuming that every time an eventfd notified us,
there was only a single event waiting for us. This meant that if,
while one API request was being processed, two more arrived, the
second one would not be processed (until the next one arrived, when it
would be processed instead of that event, and so on). To fix this,
make sure we're processing the number of API and debug requests we've
been told have arrived, rather than just one. This is easy to
demonstrate by sending lots of API events and adding some sleeps to
make sure multiple events can arrive while each is being processed.
For other uses of eventfd, like the exit event, this doesn't matter —
even if we've received multiple exit events in quick succession, we
only need to exit once. So I've only made this change where receiving
an event is non-idempotent, i.e. where it matters that we process the
event the right number of times.
Technically, reset requests are also non-idempotent — there's an
observable difference between a VM resetting once, and a VM resetting
once and then immediately resetting again. But I've left that alone
for now because two resets in immediate succession doesn't sound like
something anyone would ever want to me.
Signed-off-by: Alyssa Ross <hi@alyssa.is>
Function `system_registers` took mutable vector reference and modified
the vector content. Now change the definition to `get/set` style.
And rename to `get/set_sys_regs` to align with other functions.
Signed-off-by: Michael Zhao <michael.zhao@arm.com>
On AArch64, the function `core_registers` and `set_core_registers` are
the same thing of `get/set_regs` on x86_64. Now the names are aligned.
This will benefit supporting `gdb`.
Signed-off-by: Michael Zhao <michael.zhao@arm.com>
The VM specific signal (currently only SIGWINCH) should only be handled
when the VM is running.
The generic VMM signals (SIGINT and SIGTERM) need handling at all times.
Split the signal handling into two separate threads which have differing
lifetimes.
Tested by:
1.) Boot full VM and check resize handling (SIGWINCH) works & sending
SIGTERM leads to cleanup (tested that API socket is removed.)
2.) Start without a VM and send SIGTERM/SIGINT and observe cleanup (API
socket removed)
3.) Boot full VM, delete VM and observe 2.) holds.
4.) Boot full VM, delete VM, recreate VM and observe 1.) holds.
Fixes: #4269
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
And along with virtio-queue, we must also bump vhost-user-backend from
0.3.0 to 0.5.0 (since it relies on virtio-queue 0.4.0).
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
The Linux kernel now checks for this before marking CPUs as
hotpluggable:
commit aa06e20f1be628186f0c2dcec09ea0009eb69778
Author: Mario Limonciello <mario.limonciello@amd.com>
Date: Wed Sep 8 16:41:46 2021 -0500
x86/ACPI: Don't add CPUs that are not online capable
A number of systems are showing "hotplug capable" CPUs when they
are not really hotpluggable. This is because the MADT has extra
CPU entries to support different CPUs that may be inserted into
the socket with different numbers of cores.
Starting with ACPI 6.3 the spec has an Online Capable bit in the
MADT used to determine whether or not a CPU is hotplug capable
when the enabled bit is not set.
Link: https://uefi.org/htmlspecs/ACPI_Spec_6_4_html/05_ACPI_Software_Programming_Model/ACPI_Software_Programming_Model.html?#local-apic-flags
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
This check is new in the beta version of clippy and exists to avoid
potential deadlocks by highlighting when the test in an if or for loop
is something that holds a lock. In many cases we would need to make
significant refactorings to be able to pass this check so disable in the
affected crates.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
