There is some duplication between regular and hotplug virtio-fs tests
that can be factorized by adding a simple hotplug flag to choose if each
test should run with or without hotplugging the device.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
The hotplugged virtio devices were not added to the list of virtio
devices from the DeviceManager. This patch fixes it, as it was causing
hotplugged virtio-fs devices from not supporting memory hotplug, since
they were never getting the update as they were not part of the list of
virtio devices held by the DeviceManager.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Adds DeviceManager method `make_virtio_fs_device` which creates a single
device, and modifies `make_virtio_fs_devices` to use this method.
Implements the new `vm.add-fs route`.
Signed-off-by: Dean Sheather <dean@coder.com>
Currently unimplemented. Once implemented, this API will allow for
creating virtio-fs devices in the VM after it has booted.
Signed-off-by: Dean Sheather <dean@coder.com>
In the context of the shared memory region used by virtio-fs in order to
support DAX feature, the shared region is exposed as a dedicated PCI
BAR, and it is backed by a KVM userspace mapping.
Upon BAR remapping, the BAR is moved to a different location in the
guest address space, and the KVM mapping must be updated accordingly.
Additionally, we need the VirtioDevice to report the updated guest
address through the shared memory region returned by get_shm_regions().
That's why a new setter is added to the VirtioDevice trait, so that
after the mapping has been updated for KVM, we can tell the VirtioDevice
the new guest address the shared region is located at.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
By adding the shared memory regions to the list of BARs, we make sure
the DeviceManager will register it as a BAR on the PCI bus. Without
this, when PCI BAR reprogramming happens, the PCI bus errors since it
does not know about any BAR at the specified address.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
The order the elements are pushed into the list is important to restore
them in the right order. This is particularly important for MmioDevice
(or VirtioPciDevice) and their VirtioDevice counterpart.
A device must be fully ready before its associated transport layer
management can trigger its restoration, which will end up activating the
device in most cases.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Any virtio device relying on the mmio transport layer can be snapshotted
and restored thanks to this new patch. From the MmioDevice perspective,
it is mainly a matter of saving the information about the virtqueues as
the restore path will need them to activate the device (if needed
because it has been activated before being snapshotted).
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
In anticipation for adding snapshot/restore support to virtio devices,
this commit introduces two new helpers updating the available and used
indexes of a queue, relying on the guest memory.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
This commit relies on serde to serialize and deserialize the content of
a Queue structure. This will be useful information to store when
implementing snapshot/restore feature for virtio devices.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: Yi Sun <yi.y.sun@linux.intel.com>
Add the WRITE_KILL_PRIV write flag, corresponding to
FUSE_WRITE_KILL_PRIV introduced in 7.31, and use to only remove the
setuid and setgid bits (by switching credentials) conditionally.
Signed-off-by: Sergio Lopez <slp@redhat.com>
Add support for MAX_PAGES, corresonding to FUSE_MAX_PAGES introduced
in FUSE 7.28.
This allows us to negotiate with the kernel the maximum number of
pages that we support to transfer in a single request.
Signed-off-by: Sergio Lopez <slp@redhat.com>
Add support for FOPEN_CACHE_DIR, a flag that allows us to tell the
guest that it's safe to cache a directory, introduced in FUSE 7.28.
Signed-off-by: Sergio Lopez <slp@redhat.com>
When reporting the BAR size it is necessary to return a value that is
encoded such that all the bits are set that represent the mask of the
natural alignment of the field.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Add support for specifying the PCI revision in the PCI configuration and
populate this with the value of 1 for virtio-pci devices.
The virtio-pci specification is slightly ambiguous only saying that
transitional (i.e. devices that support legacy and virtio 1.0) should
set this to 0. In practice it seems that software expects the revision
to be set to 1 for modern only devices.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
OVMF and other standard firmwares use I/O port 0x402 as a simple debug
port by writing ASCII characters to it. This is gated under a feature
that is not enabled by default.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
After all the previous refactoring patches, we can finally create
multiple threads under the same backend. This is directly combined with
multiqueues so that it will create one thread per queue.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Anticipating the follow up patches to run multiple threads for the same
backend, we need the initialization of the disk to happen in the high
level structure VhostUserBlkBackend.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
The DiskFile will need to be shared across multiple threads when running
multiple queues across these threads. That's why it needs to be put
inside an Arc. The reason for the Mutex is because execute() expects a
mutable object implementing Read + Write + Seek. Unfortunately, this
create a contention point as the object needs to be locked from each
thread, reducing the performance gain we will get with multiple threads.
The need for an immutable object would solve this problem, and it will
be addressed later through follow up patches.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
There is no need for retrieving the VringWorker since we don't need to
register some extra file descriptors to the epoll loop.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
We now support assigning device ids for VFIO and virtio-pci devices so
this error can be generalised.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Extend the eject_device() method on DeviceManager to also support
virtio-pci devices being unplugged.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Add an accessor to return the underlying VirtioDevice. This is useful
for managing the removal of the device from internal datastructures when
handling virtio-pci device unplug.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
In order to support hotplugging there is a map of human readable device
id to PCI BDF map.
As the device id is part of the specific device configuration (e.g.
NetConfig) it is necessary to return the id through from the helper
functions that create the devices through to the functions that add
those devices to the bus. This necessitates changing a great deal of
function prototypes but otherwise has little impact.
Currently only if an id is supplied by the user as part of the device
configuration is it populated into this map. A later commit will
populate with an autogenerated name where none is supplied by the user.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
In order to support freeing the memory that is allocated we need to make
sure that we update the internal representation so that free_bars() can
correctly free the memory if the device has its BARs moved.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Implement the free_bars() method from the PciDevice trait which is used
as part of the device removal process. Although there is only one BAR
allocated by VirtioPciDevice simplify the code by using a vector.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Now that ownership of the memory regions used for the virtio-pmem and
vhost-user-fs devices have been moved into those devices it is no longer
necessary to track them inside DeviceManager.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Move the release of the managed memory region from the DeviceManager to
the vhost-user-fs device. This ensures that the memory will be freed when
the device is unplugged which will lead to it being Drop()ed.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Move the release of the managed memory region from the DeviceManager to
the virtio-pmem device. This ensures that the memory will be freed when
the device is unplugged which will lead to it being Drop()ed.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
