This is preliminary work to ensure a migrated VM is created right before
it is restored. This will be useful when moving to a design where the VM
is both created and restored simultaneously from the Snapshot.
In details, that means the MemoryManager is the object that must be
created upon receiving the config from the source VM, so that memory
content can be later received and filled into the GuestMemory.
Only after these steps happened, the snapshot is received from the
source VM, and the actual Vm object can be created from both the
snapshot and the MemoryManager previously created.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
These look alarming if you are booting with the a distro kernel which is
now a recommended approach.
See: #4786
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
The restore path of MemoryManager is handled specially without
implementing a `Snapshottable:restore()`. Removing the explicit call to
it along the migration code path to avoid confusions.
See: #4783
Signed-off-by: Bo Chen <chen.bo@intel.com>
Vdpa now implements the Migratable trait, which allows the device to be
added to the DeviceTree and therefore allows live migrating any vDPA
device that supports being suspended.
Given a vDPA device can't be resumed from a suspended state without
having to reset everything, we don't support pause/resume for a vDPA
device, as well as snapshot/restore (which requires resume to be
supported).
In order for the migration to work locally, reusing the same device on
the same host machine, the vhost-vdpa handler is dropped after the
snapshot has been performed, which allows the destination VM to open the
device without any conflict about the device being busy.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Adding VHOST_VDPA_GET_CONFIG_SIZE and VHOST_VDPA_SUSPEND to the list of
authorized ioctls for the vmm thread.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
In this way, we have all functions related to generate default values of
vm-config structs in the same location.
Signed-off-by: Bo Chen <chen.bo@intel.com>
These have been replaced by members of PayloadConfig and should be
removed in v28.0 (mentioned in v26.0 release notes.)
Fixes: #4737
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
This is consistent when considering that some structs have a
`#[derive(Default)`] so it makes sense for the default implementations
to be in the same location.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Place the data structures that are required for constructing a VmConfig
into it's own module from the logic that exists to suppot them.
This is useful as a consumer of the API can now clearly see what data
structures make up the API for creating VMs.
This has no functional change and I made no attempt to clean up the
ordering (it's as in the original file) nor any other clean up.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Bumps [clap](https://github.com/clap-rs/clap) from 3.2.22 to 4.0.9.
- [Release notes](https://github.com/clap-rs/clap/releases)
- [Changelog](https://github.com/clap-rs/clap/blob/master/CHANGELOG.md)
- [Commits](clap-rs/clap@v3.2.22...v4.0.9)
---
updated-dependencies:
- dependency-name: clap
dependency-type: direct:production
update-type: version-update:semver-major
...
Moving to the major version 4 introduced some breaking changes which had
to be handled manually.
Fixes#4709
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
This option is needed for the openapi consumer (e.g. Kata Containers) to
load firmware (e.g. td-shim) for booting.
Signed-off-by: Bo Chen <chen.bo@intel.com>
This simplifies the CI process but also logical with the existing
functionality under "guest_debug" (dumping guest memory).
Fixes: #4679
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Adding the support for the user to set the MTU for the vhost-user-net
backend, which allows the integration test to be extended with the test
of the MTU parameter.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Adjust MTU logic such that:
1. Apply an MTU to the TAP interface if the user supplies it
2. Always query the TAP interface for the MTU and expose that.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
This simplifes the buld and checks with very little overhead and the
fwdebug device is I/O port device on 0x402 that can be used by edk2 as a
very simple character device.
See: #4679
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Add tracing of the VM boot sequence from the point at which the request
to create a VM is received to the hand-off to the vCPU threads running.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Add a new feature "tracing" that enables tracing functionality via the
"tracer" crate (sadly features and crates cannot share the same name.)
Setup: tracer::start()
The main functionality is a tracer::trace_scope()! macro that will add
trace points for the duration of the scope. Tracing events are per
thread.
Finish: tracer::end() this will write the trace file (pretty printed
JSON) to a file in the current directory.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Add a new "mtu" parameter to the NetConfig structure and therefore to
the --net option. This allows Cloud Hypervisor's users to define the
Maximum Transmission Unit (MTU) they want to use for the network
interface that they create.
In details, there are two main aspects. On the one hand, the TAP
interface is created with the proper MTU if it is provided. And on the
other hand the guest is made aware of the MTU through the VIRTIO
configuration. That means the MTU is properly set on both the TAP on the
host and the network interface in the guest.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
There's no need to delegate the resize operation to the virtio-mem
thread. This can come directly from the vmm thread which will use the
Mem object to update the VIRTIO configuration and trigger the interrupt
for the guest to be notified.
In order to achieve what's described above, the VirtioMemZone structure
now has a handle onto the Mem object directly. This avoids the need for
intermediate Resize and ResizeSender structures.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Given the AMX x86 feature has been made available since kernel v5.17,
and given we don't have any test validating this feature, there's no
need to keep it behing a Rust feature gate.
Fixes#3996
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Multiple rust-vmm crates must be updated at once given the vm-memory one
has been updated and they all rely on vm-memory.
- vm-memory from 0.8.0 to 0.9.0
- vhost from 0.4.0 to 0.5.0
- virtio-queue from 0.5.0 to 0.6.0
- vhost-user-backend from 0.6.0 to 0.7.0
- linux-loader from 0.4.0 to 0.5.0
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Removing the option --tdx to specify that we want to run a TD VM. Rely
on --platform option by adding the "tdx" boolean parameter. This is the
new way for enabling TDX with Cloud Hypervisor.
Along with this change, the way to retrieve the firmware path has been
updated to rely on the recently introduced PayloadConfig structure.
Fixes#4556
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
The PCI buses should not declare the address space related to the MMIO
config space given it's already declared in the MCFG table and through
the motherboard device PNP0C02 in the DSDT table.
The PCI MMIO config region for the segment was being wrongly exposed as
part of the _CRS for the ACPI bus device (using Memory32Fixed). Exposing
it via this object was ineffectual as the equivalent entry in the
PNP0C02 (_SB_.MBRD) marked those ranges as not usable via the kernel.
Either way, with both devices used by the kernel, the kernel will not
try and use those memory ranges for the device BARs. However under
td-shim on TDX the PNP0C02 device is not on the permitted list of
devices so the the memory ranges were not marked as unusable resulting
in the kernel attempting to allocate BARs that collided with the PCI
MMIO configuration space.
This is based on the kernel documentation PCI/acpi-info.rst which relies
on ACPI and PCI Firmware specifications. And here are the interesting
quotes from this document:
"""
Prior to the addition of Extended Address Space descriptors, the failure
of Consumer/Producer meant there was no way to describe bridge registers
in the PNP0A03/PNP0A08 device itself. The workaround was to describe the
bridge registers (including ECAM space) in PNP0C02 catch-all devices.
With the exception of ECAM, the bridge register space is device-specific
anyway, so the generic PNP0A03/PNP0A08 driver (pci_root.c) has no need
to know about it.
PNP0C02 “motherboard” devices are basically a catch-all. There’s no
programming model for them other than “don’t use these resources for
anything else.” So a PNP0C02 _CRS should claim any address space that is
(1) not claimed by _CRS under any other device object in the ACPI
namespace and (2) should not be assigned by the OS to something else.
The address range reported in the MCFG table or by _CBA method (see
Section 4.1.3) must be reserved by declaring a motherboard resource. For
most systems, the motherboard resource would appear at the root of the
ACPI namespace (under _SB) in a node with a _HID of EISAID (PNP0C02),
and the resources in this case should not be claimed in the root PCI
bus’s _CRS. The resources can optionally be returned in Int15 E820 or
EFIGetMemoryMap as reserved memory but must always be reported through
ACPI as a motherboard resource.
"""
This change has been manually tested by running a VM with multiple
segments (4 segments), and by hotplugging an additional disk to the
segment number 2 (third segment).
From one shell:
"""
cloud-hypervisor \
--cpus boot=1 \
--memory size=1G \
--kernel vmlinux \
--cmdline "root=/dev/vda1 rw console=hvc0" \
--disk path=jammy-server-cloudimg.raw \
--api-socket /tmp/ch.sock \
--platform num_pci_segments=4
"""
From another shell (after the VM is booted):
"""
ch-remote \
--api-socket=/tmp/ch.sock \
add-disk \
path=test-disk.raw,id=disk2,pci_segment=2
"""
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Use VgicConfig to initialize Vgic.
Use Gic::create_default_config everywhere so we don't always recompute
redist/msi registers.
Add a helper create_test_vgic_config for tests in hypervisor crate.
Signed-off-by: Nuno Das Neves <nudasnev@microsoft.com>
AArch64 can share the same way of loading payload with x86_64. It makes
the payload loading more consistent between different arches.
Signed-off-by: Jianyong Wu <jianyong.wu@arm.com>
uefi_flash is used when load firmware, that is load payload depends on
device manager. move uefi_flash to memory manager can eliminate the
dependency.
Signed-off-by: Jianyong Wu <jianyong.wu@arm.com>
Signed-off-by: Michael Zhao <michael.zhao@arm.com>
A new firmware item has been added into payload config, we need
extend ability to load standalone firmware on AArch64.
"load_kernel" method will be the entry of image loading work including
kernel and firmware.
This change is back compatible. So, we can either load firmware through
"-kernel" like before or "-firmware".
Signed-off-by: Jianyong Wu <jianyong.wu@arm.com>
Later, we will load standalone firmware. So, refactor load_kernel
by abstracting load_firmware method.
Signed-off-by: Jianyong Wu <jianyong.wu@arm.com>
Given the virtio-console is now able to buffer its output when no PTY is
connected on the other end, the device manager code is updated to enable
this. Moving the endpoint type from FilePair to PtyPair enables the
proper codepath in the virtio-console implementation, as well as
updating the PTY resize code, and forcing the PTY to always be
non-blocking.
The non-blocking behavior is required to avoid blocking the guest that
would be waiting on the virtio-console driver. When receiving an
EWOULDBLOCK error, the output will simply be redirected to the temporary
buffer so that it can be later flushed.
The PTY resize logic has been slightly modified to ensure the PTY file
descriptors are closed. It avoids the child process to keep a hold onto
the PTY device, which would have caused the PTY to believe something is
connected on the other end, which would have prevented the detection of
any new connection on the PTY.
Fixes#4521
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
We want to be able to reuse the SerialBuffer from the virtio-devices
crate, particularly from the virtio-console implementation. That's why
we move the SerialBuffer definition to its own crate so that it can be
accessed from both vmm and virtio-devices crates, without creating any
cyclic dependency.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
If the epoll_wait() call returns EINTR, this only means a signal has
been delivered before any of the file descriptors registered triggered
an event or before the end of the timeout (if timeout isn't -1). For
that reason, we should simply try to listen on the epoll loop again.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
We must limit how much the buffer can grow, otherwise this could lead
the process to consume all the memory on the machine. This could happen
if the output from the guest was very important and nothing would
connect to the PTY for a long time.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Set the maximum number of HW breakpoints according to the value returned
from `Hypervisor::get_guest_debug_hw_bps()`.
Signed-off-by: Michael Zhao <michael.zhao@arm.com>
On AArch64, `translate_gva` API is not provided by KVM. We implemented
it in VMM by walking through translation tables.
Address translation is big topic, here we only focus the scenario that
happens in VMM while debugging kernel. This `translate_gva`
implementation is restricted to:
- Exception Level 1
- Translate high address range only (kernel space)
This implementation supports following Arm-v8a features related to
address translation:
- FEAT_LPA
- FEAT_LVA
- FEAT_LPA2
The implementation supports page sizes of 4KiB, 16KiB and 64KiB.
Signed-off-by: Michael Zhao <michael.zhao@arm.com>
The goal of this patch is to provide a reliable way to detect when the
other end of the PTY is connected, and therefore be able to identify
when we can write to the PTY device. This is needed because writing to
the PTY device when the other end isn't connected causes the loss of
the written bytes.
The way to detect the connection on the other end of the PTY is by
knowing the other end is disconnected at first with the presence of the
EPOLLHUP event. Later on, when the connection happens, EPOLLHUP is not
triggered anymore, and that's when we can assume it's okay to write to
the PTY main device.
It's important to note we had to ensure the file descriptor for the
other end was closed, otherwise we would have never seen the EPOLLHUP
event. And we did so by removing the "sub" field from the PtyPair
structure as it was keeping the associated File opened.
Fixes#3170
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Since our firmware files are still designed to be used via PVH use the
load_kernel() function to load the firmware falling back to legacy
firmware loading if necessary.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Adding new I/O ports for both the ACPI shutdown and the ACPI PM timer
devices so they can be triggered from both addresses. The reason for
this change is that TDX expects only certain I/O ports to be enabled
based on what QEMU exposes. We follow this to avoid new ports from being
opened exclusively for Cloud Hypervisor.
We have to keep the former I/O ports available given all firmwares
haven't been updated yet. Once we reach a point where we know both Rust
Hypervisor Firmware, OVMF, TDVF and TDSHIM have been updated with the
new port values, we'll be able to remove the former ports.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
The old API remains usable, and will remain usable for two releases but
we should only advertise the new API.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Introduce a new top level member of VmConfig called PayloadConfig that
(currently) encompasses the kernel, commandline and initramfs for the
guest to use.
In future this can be extended for firmware use. The existing
"--kernel", "--cmdline" and "initramfs" CLI parameters now fill the
PayloadConfig.
Any config supplied which uses the now deprecated config members have
those members mapped to the new version with a warning.
See: #4445
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
