Add ability to notify via the GED device that there is some new hotplug
activity. This will be used by the CpuManager (and later DeviceManager
itself) to notify of new hotplug activity.
Currently it has a hardcoded IRQ of 5 as the ACPI tables also need to
refer to this IRQ and the IRQ allocation does not permit the allocation
of specific IRQs.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
This device provides the ability to notify the kernel via interrupt that
there is some new hotplug activity. The type is determined by reading
from the I/O port.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Currently only increasing the number of vCPUs is supported but in the
future it will be extended.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
When configuring a processor after boot as a hotplug CPU we only
configure a subset of the CPU state. In particular we should not
configure the FPU, segment registers (or reconfigure the paging which is
a side-effect of that) nor the main registers. Achieve this by making
the function take an Option type for the start address.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Refactor the vCPU thread starting so that there is the possibility to
bring on extra vCPU threads.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Currently this just holds the thread handle but will be enlarged to
encompass details such as whether the vCPU is currently being inserted
or ejected.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
The easiest way to detect if the kernel is willing to accept hotplug
vCPUs is to check the dmesg output.
Switch the test to bionic as the Clear Cloud image lacks "dmesg."
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
The MADT table contains the details of all the potential vCPUs and
whether they are present at boot (as indicated by the flags field.)
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
When initialising the ACPI tables and configuring the VM use the new
accessor on the CpuManager to get the number of boot vCPUs.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
The way in which offsets are currently use in memory regions is
derived from QEMU's contrib/libvhost-user, but while this one works
mainly by translating vmm va's to local va's, vm-memory expects us to
use proper guest addresses and thus, define memory regions that
actually match the guest's memory disposition.
With this change, we create the memory regions with the proper length
and offsets, extend AddrMapping to store the guest physical address,
and use the latter instead of offset in vmm_va_to_gpa().
Signed-off-by: Sergio Lopez <slp@redhat.com>
Since the kvm crates now depend on vmm-sys-util, the bump must be
atomic.
The kvm-bindings and ioctls 0.2.0 and 0.4.0 crates come with a few API
changes, one of them being the use of a kvm_ioctls specific error type.
Porting our code to that type makes for a fairly large diff stat.
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Reorder the build commands so that more build assets in the target/
build directory can be reused. This will reduce the build time.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Introduce method unmap_mmio_regions to unmap all regions mapped to host.
This patch eliminate the error message "Could not unset container".
Signed-off-by: Wu Zongyong <wuzongyong@linux.alibaba.com>
context ID on vsock man defines a 32-bits value, openapi default integer
is a signed 32-bits value.
This could lead to miss one bit during castings for typed client
implmentations. Lets increase the range of valid values by requesting an
int64.
Signed-off-by: Jose Carlos Venegas Munoz <jose.carlos.venegas.munoz@intel.com>
This reverts commit 66fde245b3.
The commit broke the VFIO support for MSI. Issue needs to be
investigated but in the meantime, it is safer to fix the codebase.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
The setcap tool is unusual in its behaviour in that it will process each
parameter separately and abort if one of the parameters is invalid (e.g.
after a symlink.) But any previous parameters will be correctly
processed. This means that depending on the generated test binary name
an invalid entry might occur before it and thus abort the setcap.
Fix to only setcap on the test binary by excluding the other files.
Because the binary name is based on a hash the PR that introduced this
version worked but once merged the hash changed and broke the build.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
In order to validate the new virtio-fs daemon written in Rust is
behaving correctly, a new integration test has been added. Important to
note that for now, only a test with cache=none and dax=off can be added
since the daemon does not support shared memory region yet.
The long term goal being to replace virtiofsd with vhost_user_daemon
once it will reach parity regarding the supported features.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Because the vhost_user_backend crate needs some changes to support
moving the process to a different mount namespace and perform a pivot
root, it is not possible to change '/' to the given shared directory.
This commit, as a temporary measure, let the code point at the given
shared directory.
The long term solution is to perform the mount namespace change and the
pivot root as this will provide greater security.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
This patch implements a vhost-user-fs daemon based on Rust. It only
supports communicating through the virtqueues. The support for the
shared memory region associated with DAX will be added later.
It relies on all the code copied over from the crosvm repository, based
on the commit 961461350c0b6824e5f20655031bf6c6bf6b7c30.
It also relies on the vhost_user_backend crate, limiting the amount of
code needed to get this daemon up and running.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Add a Server type that links the FUSE protocol with the virtio
transport. It parses messages sent on the virtio queue and then
calls the appropriate method of the Filesystem trait.
This code has been ported over from crosvm commit
961461350c0b6824e5f20655031bf6c6bf6b7c30.
One small modification has been applied to the original code. Because
cloud-hypervisor didn't have the macro used by crosvm, the match
statement in the function handle_message() has been updated.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Introduce helpers to split a virtio descriptor into its readable part on
one side, and into its writable part on the other side. This is useful
to separate the request from the reply.
This code has been ported over from crosvm commit
961461350c0b6824e5f20655031bf6c6bf6b7c30.
Two important modifications have been applied to the original code:
- GuestMemory is replaced by GuestMemoryMmap from the vm-memory crate,
which comes with different ways of accessing the memory regions.
- VolatileSlice has different methods, which means the code has been
updated accordingly.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
The vm_memory implementation for VolatileSlice is able to read and write
to a source or destination which implements a Read or Write trait.
Unfortunately, this is not enough for this specific use case as we need
to be able to write to a file at a specific offset, which is not
provided by the Read or Write trait.
This code has been ported over from crosvm commit
961461350c0b6824e5f20655031bf6c6bf6b7c30.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Add a "passthrough" file system implementation that just forwards its
requests to the appropriate system call.
This code has been ported over from crosvm commit
961461350c0b6824e5f20655031bf6c6bf6b7c30.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Add the `Filesystem` trait, which is the main interface between the
transport and the actual file system implementation.
This code has been ported over from crosvm commit
961461350c0b6824e5f20655031bf6c6bf6b7c30.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
The multikey module provides a BTreeMap implementation that can use one
of 2 different kinds of keys to look up a value. This is needed by the
virtio-fs server since it needs to be able to look up keys either by
u64 or by a (ino_t, dev_t) pair.
This code has been ported over from crosvm commit
961461350c0b6824e5f20655031bf6c6bf6b7c30.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
To be able to deal with FUSE requests, this commit introduces FUSE
definitions, copied over from the crosvm commit
961461350c0b6824e5f20655031bf6c6bf6b7c30.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
This new crate will be dedicated to vhost_user_fs specific code that can
be used as a library from the vhost-user-fs daemon.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
In order to iterate over a chain of descriptor chains, this code has
been ported over from crosvm, based on the commit
961461350c0b6824e5f20655031bf6c6bf6b7c30.
The main modification compared to the original code is the way the
sorting between readable and writable descriptors happens.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
By giving the same caps to both cloud-hypervisor and the test binary, we
can access information under /proc related to the VM PID.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
