This commit introduces the new command "add-device" that will let a user
hotplug a VFIO PCI device to an already running VM.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Through the BusDevice implementation from the DeviceManager, and by
inserting the DeviceManager on the IO bus for a specific IO port range,
the VMM now has the ability to handle PCI device hotplug.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
In anticipation of inserting the DeviceManager on the IO/MMIO buses,
the DeviceManager must implement the BusDevice trait.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Expands the existing GED device description in the DSDT table. A new
case of hotplug notification is being added to the already existing CPU
and memory hotplug. The third case of hotplug being the addition/removal
of a PCI device, it is identified through the flag 0x4.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Create a small method that will perform both hotplug of all the devices
identified by PCIU bitmap, and then perform the hotunplug of all the
devices identified by the PCID bitmap.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
The _EJ0 method provides the guest OS a way to notify the VMM that the
device has been properly ejected from the guest OS. Only after this
point, the VMM can fully remove the device.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
This new PHPR device in the DSDT table introduces some specific
operation regions and the associated fields.
PCIU stands for "PCI up", which identifies PCI devices that must be
added.
PCID stands for "PCI down", which identifies PCI devices that must be
removed.
B0EJ stands for "Bus 0 eject", which identifies which device on the bus
has been ejected by the guest OS.
Thanks to these fields, the VMM and the guest OS can communicate while
performing hotplug/hotunplug operations.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Adds the DVNT method to the PCI0 device in the DSDT table. This new
method is responsible for checking each slot and notify the guest OS if
one of the slots is supposed to be added or removed.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
This commit introduces the ACPI support for describing the 32 device
slots attached to the main PCI host bridge.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Now that virtio-mmio transport has support for SHM regions we should be
able to test virtio-fs against it.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
The details of the SHM regions or the lack of, which is used by
virtio-fs DAX, is communicated through configuration fields on the
virtio-mmio memory region. Implement the necessary fields to return the
SHM entries and in particular return a length of (u64)-1 which is used
by the kernel to indicate there are no SHM regions.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
A new ClearLinux image has been uploaded to the Azure storage account.
It is based off of the ClearLinux cloudguest image 31310 version, with
three extra bundles added to it.
First bundle is curl, which adds the curl binary to the image, second
bundle is iperf, adding the iperf binary to the image, and third bundle
is sysadmin-basic to include utility like netcat.
The image is 2G in size.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
As we switched to external vhost_rs crate, delete this internal one.
All vhost changes should go to cloud-hypervisor/vhost.
Signed-off-by: Eryu Guan <eguan@linux.alibaba.com>
As cloud-hypervisor/vhost crate (dragonball branch) is ready to be used,
switch vhost_rs from internal crate to the external one.
Signed-off-by: Eryu Guan <eguan@linux.alibaba.com>
Current device configuration space offset value is 0, we need to
update that value to VHOST_USER_CONFIG_OFFSET(0x100) to follow the spec
Fixes#844
Signed-off-by: Arron Wang <arron.wang@intel.com>
On tests that expect a clean shutdown there is no need to try and kill
the child after wait() has returned as the process has already exited.
Further there is no need to sleep before wait() as wait will block until
the VM and VMM shutdown is complete.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
This should address any flakiness as the VMM process will have
completely terminated and all files closed.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Many of the tests attempted to SSH into the VM and then run "shutdown"
but don't actually check that the VM has shutdown correctly and proceed
to kill the child process. Remove the associated SSH commands and sleeps
from those tests that are not explicitly checking the shutdown
behaviour.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Only some tests require the output for the tests to be captured so
default to not capturing the output to a pipe and instead make it
controllable.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Many of the tests use an identical network configuration. Add a
GuestCommand::default_net() to generate this configuration and use it
wherever possible.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Many of the tests use an identical disk configuration. Add a
GuestCommand::default_disks() to generate this configuration and use it
wherever possible.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
This is a thin wrapper over std::process:Command which currently only
specifies the default binary but in future will handle more default
behaviour.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
In anticipation of the support for device hotplug, this commit moves the
DeviceManager object into an Arc<Mutex<>> when the DeviceManager is
being created. The reason is, we need the DeviceManager to implement the
BusDevice trait and then provide it to the IO bus, so that IO accesses
related to device hotplug can be handled correctly.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
We weren't processing events arriving at the HIPRIO queue, which
implied ignoring FUSE_INTERRUPT, FUSE_FORGET, and FUSE_BATCH_FORGET
requests.
One effect of this issue was that file descriptors weren't closed on
the server, so it eventually hits RLIMIT_NOFILE. Additionally, the
guest OS may hang while attempting to unmount the filesystem.
Signed-off-by: Sergio Lopez <slp@redhat.com>
There is no reason to give some special capabilities to the Rust version
of virtiofsd since it behaves slightly differently and does not require
neither DAC_OVERRIDE nor SYS_ADMIN.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
vhost_user_fs doesn't really support all vhost protocol features, just
MQ and SLAVE_REQ, so return that in protocol_features().
Signed-off-by: Sergio Lopez <slp@redhat.com>
Indirect descriptors is a virtio feature that allows the driver to
store a table of descriptors anywhere in memory, pointing to it from a
virtqueue ring's descriptor with a particular flag.
We can't seamlessly transition from an iterator over a conventional
descriptor chain to an indirect chain, so Queue users need to
explicitly support this feature by calling Queue::is_indirect() and
Queue::new_from_indirect().
Signed-off-by: Sergio Lopez <slp@redhat.com>
We import slave_fs_cache mod under vhost-user-slave feature control,
but not the self::slave_fs_cache::SlaveFsCacheReq import.
Signed-off-by: Eryu Guan <eguan@linux.alibaba.com>
We want to prevent from losing interrupts while they are masked. The
way they can be lost is due to the internals of how they are connected
through KVM. An eventfd is registered to a specific GSI, and then a
route is associated with this same GSI.
The current code adds/removes a route whenever a mask/unmask action
happens. Problem with this approach, KVM will consume the eventfd but
it won't be able to find an associated route and eventually it won't
be able to deliver the interrupt.
That's why this patch introduces a different way of masking/unmasking
the interrupts, simply by registering/unregistering the eventfd with the
GSI. This way, when the vector is masked, the eventfd is going to be
written but nothing will happen because KVM won't consume the event.
Whenever the unmask happens, the eventfd will be registered with a
specific GSI, and if there's some pending events, KVM will trigger them,
based on the route associated with the GSI.
Suggested-by: Liu Jiang <gerry@linux.alibaba.com>
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
We should not assume the offset produced by ECAM is identical to the
CONFIG_ADDRESS register of legacy PCI port io enumeration.
Signed-off-by: Qiu Wenbo <qiuwenbo@phytium.com.cn>
