Use right and exact size 32 bytes for host data field
for completing the isolated import. This way OOB
can be avoided during a function call.
Signed-off-by: Muminul Islam <muislam@microsoft.com>
This patch adds missing new lines after functions,
fixes few typos in the comments, adds few missing
comments to SNP related functions.
Signed-off-by: Muminul Islam <muislam@microsoft.com>
Currently there are some inconsistencies in Cargo.toml which is causing
the following warnings during the build process:
Error parsing Cargo.toml manifest, fallback to caching entire file:
Invalid TOML document: expected key-value, found comma
Signed-off-by: Jinank Jain <jinankjain@microsoft.com>
Add necessary API to retrieve cpuid leaf on MSHV.
This API is used to update cpuid information
during the parsing of the igvm file.
Microsoft hypervisor does not provide common
CpuID like KVM. That's why we need to call this API
during the IGVM parsing.
Signed-off-by: Muminul Islam <muislam@microsoft.com>
As part SMP bringup for a SEV-SNP guest, BSP sets up the VMSA page for
each AP threads and informs hypervisor about the same using a VMGEXIT.
Thus, extend the current GHCB interface to handle this scenario.
Signed-off-by: Jinank Jain <jinankjain@microsoft.com>
SEV-SNP guest can request AMD's secure co-processor i.e., PSP to
generate an runtime attesation report. During this process guest needs
to inform PSP about the request and response GPAs where that report
would be generated by the PSP. This is handled via a VMGEXIT request.
Thus, extend the current GHCB handling to add support for it.
Signed-off-by: Jinank Jain <jinankjain@microsoft.com>
This is very similar MMIO read emulation for SEV-SNP guest.
Signed-off-by: Jinank Jain <jinankjain@microsoft.com>
Signed-off-by: Muminul Islam <muislam@microsoft.com>
MMIO emulation is also performed via VMGEXIT in case of SEV-SNP guest.
Emulation is done in a very similar way like a regular guest. Just need
to make sure that guest memory is access via read/write GPA hypercall
instead of directly accessing it.
Signed-off-by: Jinank Jain <jinankjain@microsoft.com>
Signed-off-by: Muminul Islam <muislam@microsoft.com>
Legacy port emulation requires reading RAX register from GHCB page for
SEV-SNP guest. This is the major difference between a regular guest and
SEV-SNP enabled guest.
Signed-off-by: Jinank Jain <jinankjain@microsoft.com>
Signed-off-by: Muminul Islam <muislam@microsoft.com>
Currently MSHV does not support fetching extended guest report and thus
return an appropriate error stating the NAE event is not valid.
Signed-off-by: Jinank Jain <jinankjain@microsoft.com>
Signed-off-by: Nuno Das Neves <nudasnev@microsoft.com>
As part of this handling there are 4 different operations:
1. Getting the hypervisor preffered doorbell page GPA.
2. Informing hypervisor about the doorbell page chosen by the guest
3. Querying the GPA of the doorbell page
4. Clearing the GPA of the doorbell page from hypervisor
Signed-off-by: Jinank Jain <jinankjain@microsoft.com>
Signed-off-by: Muminul Islam <muislam@microsoft.com>
As part of handling this request, hypervisor is expected to three
things:
1. Maximum GHCB protocol version supported.
2. Minimum GHCB protocol version supported.
3. SEV-page table encryption bit number.
If the guest cannot support the protocol range supplied by the
hypervisor, it should terminate
Signed-off-by: Muminul Islam <muislam@microsoft.com>
Signed-off-by: Jinank Jain <jinankjain@microsoft.com>
SEV-SNP guest allocates a GHCB page and in order to update hypervisor
about the same, there is a vmgexit which allows registering GHCB page
with the hypervisor.
Signed-off-by: Jinank Jain <jinankjain@microsoft.com>
Signed-off-by: Muminul Islam <muislam@microsoft.com>
A VMGEXIT exit occurs for any of the listed NAE events in the GHCB
specification [1] (e.g. CPUID, RDMSR/WRMSR, MMIO, port IO, etc.). Some
of these events are handled by hypervisor while other are handled by
VMM. Currently, we are adding support for one such request i.e.,
report supported SEV-SNP features by hypervisor.
[1] GHCB protocol specification:
https://www.amd.com/content/dam/amd/en/documents/epyc-technical-docs/specifications/56421.pdf
Signed-off-by: Jinank Jain <jinankjain@microsoft.com>
Signed-off-by: Muminul Islam <muislam@microsoft.com>
This is the function that needs to be called by the VMM
to inform the MSHV that isolation is complete and inform
PSP about this completion.
Signed-off-by: Jinank Jain <jinankjain@microsoft.com>
Signed-off-by: Muminul Islam <muislam@microsoft.com>
Add hypervisor VM specific API to import the isolated
pages. Hypervisor adds those pages for PSP measurement.
Signed-off-by: Jinank Jain <jinankjain@microsoft.com>
Signed-off-by: Muminul Islam <muislam@microsoft.com>
For a SEV-SNP enabled partition on MSHV, some of the VMGEXITS are
offloaded for Hypervisor to handle while the rest are handled by VMM.
By setting this additional partition property hypervisor is informed
about the VMGEXITs it needs to take care off, rest all would be handled
by the CloudHypervisor.
Signed-off-by: Jinank Jain <jinankjain@microsoft.com>
As part of this initialization for a SEV-SNP VM on MSHV, it is required
that we transition the guest state to secure state using partition
hypercall. This implies all the created VPs will transition to secure
state and could access the guest encrypted memory.
Signed-off-by: Jinank Jain <jinankjain@microsoft.com>
It's a requirement that a SEV-SNP enabled guest on MSHV must have
isolation policy set before launching the guest.
Signed-off-by: Jinank Jain <jinankjain@microsoft.com>
Include the TSC frequency as part of the KVM state so that it will be
restored at the destination.
This ensures migration works correctly between hosts that have a
different TSC frequency if the guest is running with TSC as the source
of timekeeping.
Fixes: #5786
Signed-off-by: Rob Bradford <rbradford@rivosinc.com>
This fixes all typos found by the typos utility with respect to the config file.
Signed-off-by: Philipp Schuster <philipp.schuster@cyberus-technology.de>
Update to the latest vm-memory and all the crates that also depend upon
it.
Fix some deprecation warnings.
Signed-off-by: Rob Bradford <rbradford@rivosinc.com>
This feature flag gates the development for SEV-SNP enabled guest.
Also add a helper function to identify if SNP should be enabled for the
guest.
Signed-off-by: Jinank Jain <jinankjain@microsoft.com>
Assume rax is 0xfee003e0 and the displacement is negative 0x60. The effective
address is then 0xfee00380. This is perfectly valid.
Example instruction:
c7 40 a0 00 10 00 00 movl $0x1000,-0x60(%rax)
Signed-off-by: Philipp Schuster <philipp.schuster@cyberus-technology.de>
warning: this argument is a mutable reference, but not used mutably
--> hypervisor/src/arch/x86/emulator/instructions/mod.rs:22:15
|
22 | platform: &mut dyn PlatformEmulator<CpuState = T>,
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ help: consider changing to: `&dyn PlatformEmulator<CpuState = T>`
|
= note: this is cfg-gated and may require further changes
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#needless_pass_by_ref_mut
Signed-off-by: Rob Bradford <rbradford@rivosinc.com>
error: private item shadows public glob re-export
Error: --> hypervisor/src/mshv/mod.rs:42:27
|
42 | CpuIdEntry, FpuState, LapicState, MsrEntry, SpecialRegisters, StandardRegisters,
| ^^^^^^^^^^
|
note: the name `LapicState` in the type namespace is supposed to be publicly re-exported here
--> hypervisor/src/mshv/mod.rs:16:9
|
16 | pub use mshv_bindings::*;
| ^^^^^^^^^^^^^^^^
note: but the private item here shadows it
--> hypervisor/src/mshv/mod.rs:42:27
|
42 | CpuIdEntry, FpuState, LapicState, MsrEntry, SpecialRegisters, StandardRegisters,
| ^^^^^^^^^^
= note: `-D hidden-glob-reexports` implied by `-D warnings`
Signed-off-by: Yu Li <liyu.yukiteru@bytedance.com>
On x86-64, when the underlying hypervisor platform is KVM, no
instruction emulator is necessary. KVM handles instruction boundaries
internally.
This change allows to skip the iced-x86 dependency on KVM, improving
build times, prunes the dependency graph and reduces network traffic
during the initial build.
For Hyper-V, the emulator is still necessary on x86-64, so nothing
changes there.
Signed-off-by: Christian Blichmann <cblichmann@google.com>
Bump to the latest rust-vmm crates, including vm-memory, vfio,
vfio-bindings, vfio-user, virtio-bindings, virtio-queue, linux-loader,
vhost, and vhost-user-backend,
Signed-off-by: Bo Chen <chen.bo@intel.com>
