Instead of panicking with an expect() function, the QcowDiskSync::new
function now propagates the error properly. This ensures the VMM will
not panic, which might be the source of weird errors if only one thread
exits while the VMM continues to run.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
We cannot let vhost-user devices connect to the backend when the Block,
Fs or Net object is being created during a restore/migration. The reason
is we can't have two VMs (source and destination) connected to the same
backend at the same time. That's why we must delay the connection with
the vhost-user backend until the restoration is performed.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
The code wasn't doing what it was expected to. The '?' was simply
returning the error to the top level function, meaning the Err() case in
the match was never hit. Moving the whole logic to a dedicated function
allows to identify when something got wrong without propagating to the
calling function, so that we can still stop the dirty logging and
unpause the VM.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
In case the migration succeeds, the destination VM will be correctly
running, with potential vhost-user backends attached to it. We can't let
the source VM trying to reconnect to the same backends, which is why
it's safer to shutdown the source VM.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
In anticipation for creating vhost-user devices in a different way when
being restored compared to a fresh start, this commit introduces a new
boolean created by the Vm depending on the use case, and passed down to
the DeviceManager. In the future, the DeviceManager will use this flag
to assess how vhost-user devices should be created.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Correct operation of user devices (vfio-user) requires shared memory so
flag this to prevent it from failing in strange ways.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Create the vfio-user / user devices from the config. Currently hotplug
of the devices is not supported nor can they be placed behind the
(virt-)iommu.
Removal of the coldplugged device is however supported.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
This allows the user to specify devices that are running in a different
userspace process and communicated with vfio-user.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Allow vsocks to connect to Unix sockets on the host running
cloud-hypervisor with enabled seccomp.
Reported-by: Philippe Schaaf <philippe.schaaf@secunet.com>
Tested-by: Franz Girlich <franz.girlich@tu-ilmenau.de>
Signed-off-by: Markus Theil <markus.theil@tu-ilmenau.de>
This doesn't really affect the build as we ship a Cargo.lock with fixed
versions in. However for clarity it makes sense to use fixed versions
throughout and let dependabot update them.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
The optional Processor Properties Topology Table (PPTT) table is
used to describe the topological structure of processors controlled
by the OSPM, and their shared resources, such as caches. The table
can also describe additional information such as which nodes in the
processor topology constitute a physical package.
The ACPI PPTT table supports topology descriptions for ACPI guests.
Therefore, this commit adds the PPTT table for AArch64 to enable
CPU topology feature for ACPI.
Signed-off-by: Henry Wang <Henry.Wang@arm.com>
In an Arm system, the hierarchy of CPUs is defined through three
entities that are used to describe the layout of physical CPUs in
the system:
- cluster
- core
- thread
All these three entities have their own FDT node field. Therefore,
This commit adds an AArch64-specific helper to pass the config from
the Cloud Hypervisor command line to the `configure_system`, where
eventually the `create_fdt` is called.
Signed-off-by: Henry Wang <Henry.Wang@arm.com>
Make sure the DeviceManager is triggered for all migration operations.
The dirty pages are merged from MemoryManager and DeviceManager before
to be sent up to the Vmm in lib.rs.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Now that Migratable provides the methods for starting, stopping and
retrieving the dirty pages, we move the existing code to these new
functions.
No functional change intended.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
This patch connects the dots between the vm.rs code and each Migratable
device, in order to make sure Migratable methods are correctly invoked
when migration happens.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
In anticipation for supporting the merge of multiple dirty pages coming
from multiple devices, this patch factorizes the creation of a
MemoryRangeTable from a bitmap, as well as providing a simple method for
merging the dirty pages regions under a single MemoryRangeTable.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
This patch adds all the seccomp rules missing for MSHV.
With this patch MSFT internal CI runs with seccomp enabled.
Signed-off-by: Muminul Islam <muislam@microsoft.com>
This patch adds a fallback path for sending live migration, where it
ensures the following behavior of source VM post live-migration:
1. The source VM will be paused only when the migration is completed
successfully, or otherwise it will keep running;
2. The source VM will always stop dirty pages logging.
Fixes: #2895
Signed-off-by: Bo Chen <chen.bo@intel.com>
This rule is needed to boot windows guest.
This bug was introduced while we tried to boot
windows guest on MSHV.
Signed-off-by: Muminul Islam <muislam@microsoft.com>
This patch modify the existing live migration code
to support MSHV. Adds couple of new functions to enable
and disable dirty page tracking. Add missing IOCTL
to the seccomp rules for live migration.
Adds necessary flags for MSHV.
This changes don't affect KVM functionality at all.
In order to get better performance it is good to
enable dirty page tracking when we start live migration
and disable it when the migration is done.
Signed-off-by: Muminul Islam <muislam@microsoft.com>
Right now, get_dirty_log API has two parameters,
slot and memory_size.
MSHV needs gpa to retrieve the page states. GPA is
needed as MSHV returns the state base on PFN.
Signed-off-by: Muminul Islam <muislam@microsoft.com>
It's totally acceptable to snapshot and restore a virtio-fs device that
has no cache region, since this is a valid mode of functioning for
virtio-fs itself.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
With the new beta version, clippy complains about redundant allocation
when using Arc<Box<dyn T>>, and suggests replacing it simply with
Arc<dyn T>.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
As we are now using an global control to start/stop dirty pages log from
the `hypervisor` crate, we need to explicitly tell the hypervisor (KVM)
whether a region needs dirty page tracking when it is created.
This reverts commit f063346de3.
Signed-off-by: Bo Chen <chen.bo@intel.com>
Following KVM interfaces, the `hypervisor` crate now provides interfaces
to start/stop the dirty pages logging on a per region basis, and asks
its users (e.g. the `vmm` crate) to iterate over the regions that needs
dirty pages log. MSHV only has a global control to start/stop dirty
pages log on all regions at once.
This patch refactors related APIs from the `hypervisor` crate to provide
a global control to start/stop dirty pages log (following MSHV's
behaviors), and keeps tracking the regions need dirty pages log for
KVM. It avoids leaking hypervisor-specific behaviors out of the
`hypervisor` crate.
Signed-off-by: Bo Chen <chen.bo@intel.com>
This patch adds a common function "Vmm::vm_check_cpuid_compatibility()"
to be shared by both live-migration and snapshot/restore.
Signed-off-by: Bo Chen <chen.bo@intel.com>
We now send not only the 'VmConfig' at the 'Command::Config' step of
live migration, but also send the 'common CPUID'. In this way, we can
check the compatibility of CPUID features between the source and
destination VMs, and abort live migration early if needed.
Signed-off-by: Bo Chen <chen.bo@intel.com>
With the support of dynamically turning on/off dirty-pages-log during
live-migration (only for guest RAM regions), we now can create guest
memory regions without dirty-pages-log by default both for guest RAM
regions and other regions backed by file/device.
Signed-off-by: Bo Chen <chen.bo@intel.com>
This patch extends slightly the current live-migration code path with
the ability to dynamically start and stop logging dirty-pages, which
relies on two new methods added to the `hypervisor::vm::Vm` Trait. This
patch also contains a complete implementation of the two new methods
based on `kvm` and placeholders for `mshv` in the `hypervisor` crate.
Fixes: #2858
Signed-off-by: Bo Chen <chen.bo@intel.com>
Whenever a file descriptor is sent through the control message, it
requires fcntl() syscall to handle it, meaning we must allow it through
the list of syscalls authorized for the HTTP thread.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
When running TDX guest, the Guest Physical Address space is limited by
a shared bit that is located on bit 47 for 4 level paging, and on bit 51
for 5 level paging (when GPAW bit is 1). In order to keep things simple,
and since a 47 bits address space is 128TiB large, we ensure to limit
the physical addressable space to 47 bits when runnning TDX.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
When running a TDX guest, we need the virtio drivers to use the DMA API
to share specific memory pages with the VMM on the host. The point is to
let the VMM get access to the pages related to the buffers pointed by
the virtqueues.
The way to force the virtio drivers to use the DMA API is by exposing
the virtio devices with the feature VIRTIO_F_IOMMU_PLATFORM. This is a
feature indicating the device will require some address translation, as
it will not deal directly with physical addresses.
Cloud Hypervisor takes care of this requirement by adding a generic
parameter called "force_iommu". This parameter value is decided based on
the "tdx" feature gate, and then passed to the DeviceManager. It's up to
the DeviceManager to use this parameter on every virtio device creation,
which will imply setting the VIRTIO_F_IOMMU_PLATFORM feature.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
This refactoring ensures all CPUID related operations are centralized in
`arch::x86_64` module, and exposes only two related public functions to
the vmm crate, e.g. `generate_common_cpuid` and `configure_vcpu`.
Signed-off-by: Bo Chen <chen.bo@intel.com>
In order to let a separate process open a TAP device and pass the file
descriptor through the control message mechanism, this patch adds the
support for sending a file descriptor over to the Cloud Hypervisor
process along with the add-net HTTP API command.
The implementation uses the NetConfig structure mutably to update the
list of fds with the one passed through control message. The list should
always be empty prior to this, as it makes no sense to provide a list of
fds once the Cloud Hypervisor process has already been started.
It is important to note that reboot is supported since the file
descriptor is duplicated upon receival, letting the VM only use the
duplicated one. The original file descriptor is kept open in order to
support a potential reboot.
Fixes#2525
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
There are some seccomp rules needed for MSHV
in virtio-devices but not for KVM. We only want to
add those rules based on MSHV feature guard.
Signed-off-by: Muminul Islam <muislam@microsoft.com>
The micro-http crate now uses recvmsg() syscall in order to receive file
descriptors through control messages. This means the syscall must be
part of the authorized list in the seccomp filters.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
The vfio-ioctls crate now contains a KVM feature gate. Make use of it in
Cloud Hypervisor.
That crate has two users. For the vmm crate is it straight-forward. For
the vm-device crate, we introduce a KVM feature gate as well so that the
vmm crate can pass on the configuration.
Signed-off-by: Wei Liu <liuwe@microsoft.com>
This new option allows the user to define a list of SGX EPC sections
attached to a specific NUMA node.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
In order to uniquely identify each SGX EPC section, we introduce a
mandatory option `id` to the `--sgx-epc` parameter.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
The guest can see that SGX supports provisioning as it is exposed
through the CPUID. This patch enables the proper backing of this
feature by having the host open the provisioning device and enable
this capability through the hypervisor.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
This patch fixes a few things to support TDVF correctly.
The HOB memory resources must contain EFI_RESOURCE_ATTRIBUTE_ENCRYPTED
attribute.
Any section with a base address within the already allocated guest RAM
must not be allocated.
The list of TD_HOB memory resources should contain both TempMem and
TdHob sections as well.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>