Bumping the OVMF binary version along with UEFI documentation to reflect the latest set of patches on top of tianocore/edk2 'master' branch, which can be found on the Cloud Hypervisor fork on 'ch' branch. Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
3.6 KiB
UEFI Boot
Cloud Hypervisor supports UEFI boot through the utilization of the EDK II based UEFI firmware.
Building UEFI Firmware
To avoid any unnecessary issues, it is recommended to use Ubuntu 18.04 and its default toolset. Any other compatible Linux distribution is otherwise suitable, however it is suggested to use a temporary Docker container with Ubuntu 18.04 for a quick build on an existing Linux machine.
The commands below will compile an OVMF firmware suitable for Cloud Hypervisor.
sudo apt-get update
sudo apt-get install uuid-dev nasm iasl build-essential python3-distutils git
git clone https://github.com/cloud-hypervisor/edk2 -b ch
cd edk2
. edksetup.sh
git submodule update --init
echo "ACTIVE_PLATFORM=OvmfPkg/OvmfPkgX64.dsc" >> Conf/target.txt
echo "TARGET_ARCH=X64" >> Conf/target.txt
echo "TOOL_CHAIN_TAG=GCC5" >> Conf/target.txt
make -C ./BaseTools
build
After the successful build, the resulting firmware binaries are available under Build/OvmfX64/DEBUG_GCC5/FV
underneath the edk2 checkout.
Using OVMF Binaries
Any UEFI capable image can be booted using the Cloud Hypervisor specific firmware. Windows guests under Cloud Hypervisor only support UEFI boot, therefore OVMF is mandatory there.
To make Cloud Hypervisor use UEFI boot, pass the OVMF.fd
file path as an argument to the --kernel
option. The firmware file will be opened in read only mode.
The same firmware can be used with Cloud Hypervisor or with QEMU. This is particularly useful if using QEMU for the preparation phase.
Building UEFI Firmware with Compatibility Support Module (CSM)
CSM is a module that allows to boot legacy operating systems using the OVMF firmware. OVMF can embed a CSM build of SeaBIOS. To build the SeaBIOS with CSM support, add CONFIG_CSM=y
to .config
before the build. The outcome out/Csm16.bin
is to be moved into OvmfPkg/Csm/Csm16/Csm16.bin
before OVMF is built. Then, the OVMF build will have to be passed the -D CSM_ENABLE
option in order to generate a legacy aware UEFI firmware. At the current stage, all the necessary patches are included in the Cloud Hypervisor specific SeaBIOS branch. Taking into account the previous instructions, the modified command sequence to compile an OVMF binary with CSM support is the following one:
sudo apt-get update
sudo apt-get install uuid-dev nasm iasl build-essential python3-distutils git libncurses-dev
git clone https://github.com/cloud-hypervisor/seabios -b ch
cd seabios
make menuconfig
# Enable `CONFIG_CSM` and `CONFIG_QEMU_HARDWARE`
# Please make sure `python` is in your path
make CONFIG_CSM=y CONFIG_QEMU_HARDWARE=y
cd ..
git clone https://github.com/cloud-hypervisor/edk2 -b ch
cd edk2
. edksetup.sh
git submodule update --init --recursive
cp ../seabios/out/Csm16.bin OvmfPkg/Csm/Csm16/
echo "ACTIVE_PLATFORM=OvmfPkg/OvmfPkgX64.dsc" >> Conf/target.txt
echo "TARGET_ARCH=X64" >> Conf/target.txt
echo "TOOL_CHAIN_TAG=GCC5" >> Conf/target.txt
make -C ./BaseTools
build -DCSM_ENABLE
Please note, that the CSM support has currently only been tested with Linux guests. There are no plans to provide legacy support for other OSes (e.g. Windows).