mirror of
https://github.com/cloud-hypervisor/cloud-hypervisor.git
synced 2024-12-22 21:55:20 +00:00
c297d8d796
Add a 'rate_limit_groups' field to VmConfig that defines a set of named RateLimiterGroups. When the 'rate_limit_group' field of DiskConfig is defined, all virtio-blk queues will be rate-limited by a shared RateLimiterGroup. The lifecycle of all RateLimiterGroups is tied to the Vm. A RateLimiterGroup may exist even if no Disks are configured to use the RateLimiterGroup. Disks may be hot-added or hot-removed from the RateLimiterGroup. When the 'rate_limiter' field of DiskConfig is defined, we construct an anonymous RateLimiterGroup whose lifecycle is tied to the Disk. This is primarily done for api backwards compatability. Importantly, the behavior is not the same! This implementation rate_limits the aggregate bandwidth / iops of an individual disk rather than the bandwidth / iops of an individual queue of a disk. When neither the 'rate_limit_group' or the 'rate_limiter' fields of DiskConfig is defined, the Disk is not rate-limited. Signed-off-by: Thomas Barrett <tbarrett@crusoeenergy.com>
56 lines
3.1 KiB
Markdown
56 lines
3.1 KiB
Markdown
# I/O Throttling
|
|
|
|
Cloud Hypervisor now supports I/O throttling on virtio-block and virtio-net
|
|
devices. This support is based on the [`rate-limiter` module](https://github.com/firecracker-microvm/firecracker/tree/master/src/rate_limiter)
|
|
from Firecracker. This document explains the user interface of this
|
|
feature, and highlights some internal implementations that can help users
|
|
better understand the expected behavior of I/O throttling in practice.
|
|
|
|
Cloud Hypervisor allows to limit both the I/O bandwidth (e.g. bytes/s)
|
|
and I/O operations (ops/s) independently. For virtio-net devices, while
|
|
sharing the same "rate limit" from user inputs (on both bandwidth and
|
|
operations), the RX and TX queues are throttled independently.
|
|
To limit the I/O bandwidth, Cloud Hypervisor
|
|
provides three user options, i.e., `bw_size` (bytes), `bw_one_time_burst`
|
|
(bytes), and `bw_refill_time` (ms). Both `bw_size` and `bw_refill_time`
|
|
are required, while `bw_one_time_burst` is optional.
|
|
Internally, these options define a TokenBucket with a maximum capacity
|
|
(`bw_size` bytes), an initial burst size (`bw_one_time_burst`) and an
|
|
interval for refilling purposes (`bw_refill_time`). The "refill-rate" is
|
|
`bw_size` bytes per `bw_refill_time` ms, and it is the constant rate at
|
|
which the tokens replenish. The refill process only starts happening
|
|
after the initial burst budget is consumed. Consumption from the token
|
|
bucket is unbounded in speed which allows for bursts bound in size by
|
|
the amount of tokens available. Once the token bucket is empty,
|
|
consumption speed is bound by the "refill-rate". Similarly, Cloud
|
|
Hypervisor provides another three options for limiting I/O operations,
|
|
i.e., `ops_size` (I/O operations), `ops_one_time_burst` (I/O operations),
|
|
and `ops_refill_time` (ms).
|
|
|
|
One caveat in the I/O throttling is that every-time the bucket gets
|
|
empty, it will stop I/O operations for a fixed amount of time
|
|
(`cool_down_time`). The `cool_down_time` now is fixed at `100 ms`, it
|
|
can have big implications to the actual rate limit (which can be a lot
|
|
different the expected "refill-rate" derived from user inputs). For
|
|
example, to have a 1000 IOPS limit on a virtio-blk device, users should
|
|
be able to provide either of the following two options:
|
|
`ops_size=1000,ops_refill_time=1000` or
|
|
`ops_size=10,ops_refill_time=10`. However, the actual IOPS limits are
|
|
likely to be ~1000 IOPS and ~100 IOPS respectively. The reason is the
|
|
actual rate limit users get can be as low as
|
|
`ops_size/(ops_refill_time+cool_down_time)`. As a result, it is
|
|
generally advisable to keep `bw/ops_refill_time` larger than `100 ms`
|
|
(`cool_down_time`) to make sure the actual rate limit is close to users'
|
|
expectation ("refill-rate").
|
|
|
|
## Rate Limit Groups
|
|
It is possible to throttle the aggregate bandwidth or operations
|
|
of multiple virtio-blk devices using a `rate_limit_group`. virtio-blk devices may be
|
|
dynamically added and removed from a `rate_limit_group`. The following example
|
|
demonstrates how to throttle the aggregate bandwidth of two disks to 10 MiB/s.
|
|
```
|
|
--disk path=disk0.raw,rate_limit_group=group0 \
|
|
path=disk1.raw,rate_limit_group=group0 \
|
|
--rate-limit-group bw_size=1048576,bw_refill_time,bw_refill_time=100
|
|
```
|