mirror of
https://github.com/cloud-hypervisor/cloud-hypervisor.git
synced 2024-12-22 13:45:20 +00:00
e50a641126
This commit adds the debug-console (or debugcon) device to CHV. It is a very simple device on I/O port 0xe9 supported by QEMU and BOCHS. It is meant for printing information as easy as possible, without any necessary configuration from the guest at all. It is primarily interesting to OS/kernel and firmware developers as they can produce output as soon as the guest starts without any configuration of a serial device or similar. Furthermore, a kernel hacker might use this device for information of type B whereas information of type A are printed to the serial device. This device is not used by default by Linux, Windows, or any other "real" OS, but only by toy kernels and during firmware development. In the CLI, it can be configured similar to --console or --serial with the --debug-console parameter. Signed-off-by: Philipp Schuster <philipp.schuster@cyberus-technology.de>
96 lines
3.7 KiB
Markdown
96 lines
3.7 KiB
Markdown
# `cloud-hypervisor` debug IO ports
|
|
|
|
When running x86 guests, `cloud-hypervisor` provides different kinds of debug ports:
|
|
- [`0x80` debug port](https://www.intel.com/content/www/us/en/support/articles/000005500/boards-and-kits.html)
|
|
- Debug console (by default at `0xe9`).
|
|
- Firmware debug port at `0x402`.
|
|
|
|
All of them can be used to trace user-defined guest events and all of them can
|
|
be used simultaneously.
|
|
|
|
## Debug Ports Overview
|
|
|
|
### `0x80` I/O port
|
|
|
|
Whenever the guest write one byte between `0x0` and `0xF` on this particular
|
|
I/O port, `cloud-hypervisor` will log and timestamp that event at the `debug`
|
|
log level.
|
|
|
|
It is up to the guest stack to decide when and what to write to the 0x80 port
|
|
in order to signal the host about specific events and have `cloud-hypervisor`
|
|
log it.
|
|
|
|
`cloud-hypervisor` defines several debug port code ranges that should be used
|
|
for debugging specific components of the guest software stack. When logging a
|
|
write of one of those codes to the debug port, `cloud-hypervisor` adds a
|
|
pre-defined string to the logs.
|
|
|
|
| Code Range | Component | Log string |
|
|
| ---------------- | ----------- | ------------ |
|
|
| `0x00` to `0x1f` | Firmware | `Firmware` |
|
|
| `0x20` to `0x3f` | Bootloader | `Bootloader` |
|
|
| `0x40` to `0x5f` | Kernel | `Kernel` |
|
|
| `0x60` to `0x7f` | Userspace | `Userspace` |
|
|
| `0x80` to `0xff` | Custom | `Custom` |
|
|
|
|
One typical use case is guest boot time measurement and tracing. By writing
|
|
different values to the debug I/O port at different boot process steps, the
|
|
guest will have `cloud-hypervisor` generate timestamped logs of all those steps.
|
|
That provides a basic but convenient way of measuring not only the overall guest
|
|
boot time but all intermediate steps as well.
|
|
|
|
#### Logging
|
|
|
|
Assuming parts of the guest software stack have been instrumented to use the
|
|
`cloud-hypervisor` debug I/O port, we may want to gather the related logs.
|
|
|
|
To do so we need to start `cloud-hypervisor` with the right debug level
|
|
(`-vvv`). It is also recommended to have it log into a dedicated file in order
|
|
to easily grep for the tracing logs (e.g.
|
|
`--log-file /tmp/cloud-hypervisor.log`):
|
|
|
|
```
|
|
./target/debug/cloud-hypervisor \
|
|
--kernel ~/rust-hypervisor-firmware/target/target/release/hypervisor-fw \
|
|
--disk path=~/hypervisor/images/focal-server-cloudimg-amd64.raw \
|
|
--cpus 4 \
|
|
--memory size=1024M \
|
|
--rng \
|
|
--log-file /tmp/ch-fw.log \
|
|
-vvv
|
|
```
|
|
|
|
After booting the guest, we then have to grep for the debug I/O port traces in
|
|
the log file:
|
|
|
|
```Shell
|
|
$ grep "Debug I/O port" /tmp/ch-fw.log
|
|
cloud-hypervisor: 19.762449ms: DEBUG:vmm/src/vm.rs:510 -- [Debug I/O port: Firmware code 0x0] 0.019004 seconds
|
|
cloud-hypervisor: 403.499628ms: DEBUG:vmm/src/vm.rs:510 -- [Debug I/O port: Firmware code 0x1] 0.402744 seconds
|
|
```
|
|
|
|
### Debug console port
|
|
|
|
The debug console is inspired by QEMU and Bochs, which have a similar feature.
|
|
By default, the I/O port `0xe9` is used. This port can be configured like a
|
|
console. Thus, it can print to a tty, a file, or a pty, for example.
|
|
|
|
### Firmware debug port
|
|
|
|
The firmware debug port is also a simple port that prints all bytes written to
|
|
it. The firmware debug port only prints to stdout.
|
|
|
|
## When do I need these ports?
|
|
|
|
The ports are on the one hand interesting for firmware or kernel developers, as
|
|
they provide an easy way to print debug information from within a guest.
|
|
Furthermore, you can patch "normal" software to measure certain events, such as
|
|
the boot time of a guest.
|
|
|
|
## Which port should I choose?
|
|
|
|
The `0x80` debug port and the port of the firmware debug device are always
|
|
available. The debug console must be activated via the command line, but
|
|
provides more configuration options.
|
|
|
|
You can use different ports for different aspect of your logging messages. |