libvirt/tests/qemuxml2xmltest.c

848 lines
30 KiB
C
Raw Normal View History

#include <config.h>
2007-07-18 21:34:22 +00:00
#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>
2007-07-18 21:34:22 +00:00
#include <string.h>
#include <sys/types.h>
#include <fcntl.h>
#include "testutils.h"
#ifdef WITH_QEMU
# include "internal.h"
# include "qemu/qemu_domain_address.h"
# include "qemu/qemu_domain.h"
# include "testutilsqemu.h"
# include "virstring.h"
2007-07-18 21:34:22 +00:00
# define VIR_FROM_THIS VIR_FROM_NONE
static virQEMUDriver driver;
2007-07-18 21:34:22 +00:00
enum {
WHEN_INACTIVE = 1,
WHEN_ACTIVE = 2,
WHEN_BOTH = 3,
};
struct testInfo {
char *inName;
char *outActiveName;
char *outInactiveName;
virQEMUCapsPtr qemuCaps;
};
static int
qemuXML2XMLPreFormatCallback(virDomainDefPtr def ATTRIBUTE_UNUSED,
const void *opaque ATTRIBUTE_UNUSED)
{
return 0;
}
static int
testXML2XMLActive(const void *opaque)
{
const struct testInfo *info = opaque;
return testCompareDomXML2XMLFiles(driver.caps, driver.xmlopt,
info->inName, info->outActiveName, true,
qemuXML2XMLPreFormatCallback, opaque, 0,
TEST_COMPARE_DOM_XML2XML_RESULT_SUCCESS);
}
static int
testXML2XMLInactive(const void *opaque)
{
const struct testInfo *info = opaque;
return testCompareDomXML2XMLFiles(driver.caps, driver.xmlopt, info->inName,
info->outInactiveName, false,
qemuXML2XMLPreFormatCallback, opaque, 0,
TEST_COMPARE_DOM_XML2XML_RESULT_SUCCESS);
}
static const char testStatusXMLPrefix[] =
"<domstatus state='running' reason='booted' pid='3803518'>\n"
" <taint flag='high-privileges'/>\n"
" <monitor path='/var/lib/libvirt/qemu/test.monitor' json='1' type='unix'/>\n"
" <vcpus>\n"
" <vcpu pid='3803519'/>\n"
" </vcpus>\n"
" <qemuCaps>\n"
" <flag name='vnet-hdr'/>\n"
" <flag name='qxl.vgamem_mb'/>\n"
" <flag name='qxl-vga.vgamem_mb'/>\n"
" <flag name='pc-dimm'/>\n"
" </qemuCaps>\n"
" <devices>\n"
" <device alias='balloon0'/>\n"
" <device alias='video0'/>\n"
" <device alias='serial0'/>\n"
" <device alias='net0'/>\n"
" <device alias='usb'/>\n"
" </devices>\n"
" <numad nodeset='0-2'/>\n"
" <libDir path='/tmp'/>\n"
" <channelTargetDir path='/tmp/channel'/>\n";
static const char testStatusXMLSuffix[] =
"</domstatus>\n";
static int
testCompareStatusXMLToXMLFiles(const void *opaque)
{
const struct testInfo *data = opaque;
virBuffer buf = VIR_BUFFER_INITIALIZER;
xmlDocPtr xml = NULL;
virDomainObjPtr obj = NULL;
char *expect = NULL;
char *actual = NULL;
char *source = NULL;
char *inFile = NULL, *outActiveFile = NULL;
int ret = -1;
int keepBlanksDefault = xmlKeepBlanksDefault(0);
if (virTestLoadFile(data->inName, &inFile) < 0)
goto cleanup;
if (virTestLoadFile(data->outActiveName, &outActiveFile) < 0)
goto cleanup;
/* construct faked source status XML */
virBufferAdd(&buf, testStatusXMLPrefix, -1);
virBufferAdjustIndent(&buf, 2);
virBufferAddStr(&buf, inFile);
virBufferAdjustIndent(&buf, -2);
virBufferAdd(&buf, testStatusXMLSuffix, -1);
if (!(source = virBufferContentAndReset(&buf))) {
VIR_TEST_DEBUG("Failed to create the source XML");
goto cleanup;
}
/* construct the expect string */
virBufferAdd(&buf, testStatusXMLPrefix, -1);
virBufferAdjustIndent(&buf, 2);
virBufferAddStr(&buf, outActiveFile);
virBufferAdjustIndent(&buf, -2);
virBufferAdd(&buf, testStatusXMLSuffix, -1);
if (!(expect = virBufferContentAndReset(&buf))) {
VIR_TEST_DEBUG("Failed to create the expect XML");
goto cleanup;
}
/* parse the fake source status XML */
if (!(xml = virXMLParseString(source, "(domain_status_test_XML)")) ||
!(obj = virDomainObjParseNode(xml, xmlDocGetRootElement(xml),
driver.caps, driver.xmlopt,
VIR_DOMAIN_DEF_PARSE_STATUS |
VIR_DOMAIN_DEF_PARSE_ACTUAL_NET |
VIR_DOMAIN_DEF_PARSE_PCI_ORIG_STATES))) {
VIR_TEST_DEBUG("Failed to parse domain status XML:\n%s", source);
goto cleanup;
}
/* format it back */
if (!(actual = virDomainObjFormat(driver.xmlopt, obj, NULL,
VIR_DOMAIN_DEF_FORMAT_SECURE))) {
VIR_TEST_DEBUG("Failed to format domain status XML");
goto cleanup;
}
if (STRNEQ(actual, expect)) {
/* For status test we don't want to regenerate output to not
* add the status data.*/
virTestDifferenceFullNoRegenerate(stderr,
expect, data->outActiveName,
actual, data->inName);
goto cleanup;
}
ret = 0;
cleanup:
xmlKeepBlanksDefault(keepBlanksDefault);
xmlFreeDoc(xml);
virObjectUnref(obj);
VIR_FREE(expect);
VIR_FREE(actual);
VIR_FREE(source);
VIR_FREE(inFile);
VIR_FREE(outActiveFile);
return ret;
}
static void
testInfoFree(struct testInfo *info)
{
VIR_FREE(info->inName);
VIR_FREE(info->outActiveName);
VIR_FREE(info->outInactiveName);
virObjectUnref(info->qemuCaps);
}
static int
testInfoSet(struct testInfo *info,
const char *name,
int when,
int gic)
{
if (!(info->qemuCaps = virQEMUCapsNew()))
goto error;
virQEMUCapsSetList(info->qemuCaps,
QEMU_CAPS_LAST);
if (testQemuCapsSetGIC(info->qemuCaps, gic) < 0)
goto error;
if (qemuTestCapsCacheInsert(driver.qemuCapsCache, name,
info->qemuCaps) < 0)
goto error;
if (virAsprintf(&info->inName, "%s/qemuxml2argvdata/qemuxml2argv-%s.xml",
abs_srcdir, name) < 0)
goto error;
if (when & WHEN_INACTIVE) {
if (virAsprintf(&info->outInactiveName,
"%s/qemuxml2xmloutdata/qemuxml2xmlout-%s-inactive.xml",
abs_srcdir, name) < 0)
goto error;
if (!virFileExists(info->outInactiveName)) {
VIR_FREE(info->outInactiveName);
if (virAsprintf(&info->outInactiveName,
"%s/qemuxml2xmloutdata/qemuxml2xmlout-%s.xml",
abs_srcdir, name) < 0)
goto error;
}
}
if (when & WHEN_ACTIVE) {
if (virAsprintf(&info->outActiveName,
"%s/qemuxml2xmloutdata/qemuxml2xmlout-%s-active.xml",
abs_srcdir, name) < 0)
goto error;
if (!virFileExists(info->outActiveName)) {
VIR_FREE(info->outActiveName);
if (virAsprintf(&info->outActiveName,
"%s/qemuxml2xmloutdata/qemuxml2xmlout-%s.xml",
abs_srcdir, name) < 0)
goto error;
}
}
return 0;
error:
testInfoFree(info);
return -1;
2007-07-18 21:34:22 +00:00
}
static int
tests: simplify common setup A few of the tests were missing basic sanity checks, while most of them were doing copy-and-paste initialization (in fact, some of them pasted the argc > 1 check more than once!). It's much nicer to do things in one common place, and minimizes the size of the next patch that fixes getcwd usage. * tests/testutils.h (EXIT_AM_HARDFAIL): New define. (progname, abs_srcdir): Define for all tests. (VIRT_TEST_MAIN): Change callback signature. * tests/testutils.c (virtTestMain): Do more common init. * tests/commandtest.c (mymain): Simplify. * tests/cputest.c (mymain): Likewise. * tests/esxutilstest.c (mymain): Likewise. * tests/eventtest.c (mymain): Likewise. * tests/hashtest.c (mymain): Likewise. * tests/networkxml2xmltest.c (mymain): Likewise. * tests/nodedevxml2xmltest.c (myname): Likewise. * tests/nodeinfotest.c (mymain): Likewise. * tests/nwfilterxml2xmltest.c (mymain): Likewise. * tests/qemuargv2xmltest.c (mymain): Likewise. * tests/qemuhelptest.c (mymain): Likewise. * tests/qemuxml2argvtest.c (mymain): Likewise. * tests/qemuxml2xmltest.c (mymain): Likewise. * tests/qparamtest.c (mymain): Likewise. * tests/sexpr2xmltest.c (mymain): Likewise. * tests/sockettest.c (mymain): Likewise. * tests/statstest.c (mymain): Likewise. * tests/storagepoolxml2xmltest.c (mymain): Likewise. * tests/storagevolxml2xmltest.c (mymain): Likewise. * tests/virbuftest.c (mymain): Likewise. * tests/virshtest.c (mymain): Likewise. * tests/vmx2xmltest.c (mymain): Likewise. * tests/xencapstest.c (mymain): Likewise. * tests/xmconfigtest.c (mymain): Likewise. * tests/xml2sexprtest.c (mymain): Likewise. * tests/xml2vmxtest.c (mymain): Likewise.
2011-04-29 16:21:20 +00:00
mymain(void)
2007-07-18 21:34:22 +00:00
{
int ret = 0;
struct testInfo info;
virQEMUDriverConfigPtr cfg = NULL;
if (qemuTestDriverInit(&driver) < 0)
return EXIT_FAILURE;
cfg = virQEMUDriverGetConfig(&driver);
/* TODO: test with format probing disabled too */
driver.config->allowDiskFormatProbing = true;
# define DO_TEST_FULL(name, when, gic, ...) \
do { \
if (testInfoSet(&info, name, when, gic) < 0) { \
VIR_TEST_DEBUG("Failed to generate test data for '%s'", name); \
return -1; \
} \
virQEMUCapsSetList(info.qemuCaps, __VA_ARGS__, QEMU_CAPS_LAST); \
\
if (info.outInactiveName) { \
if (virTestRun("QEMU XML-2-XML-inactive " name, \
testXML2XMLInactive, &info) < 0) \
ret = -1; \
} \
\
if (info.outActiveName) { \
if (virTestRun("QEMU XML-2-XML-active " name, \
testXML2XMLActive, &info) < 0) \
ret = -1; \
\
if (virTestRun("QEMU XML-2-XML-status " name, \
testCompareStatusXMLToXMLFiles, &info) < 0) \
ret = -1; \
} \
testInfoFree(&info); \
} while (0)
# define NONE QEMU_CAPS_LAST
# define DO_TEST(name) \
DO_TEST_FULL(name, WHEN_BOTH, GIC_NONE, NONE)
/* Unset or set all envvars here that are copied in qemudBuildCommandLine
* using ADD_ENV_COPY, otherwise these tests may fail due to unexpected
* values for these envvars */
setenv("PATH", "/bin", 1);
DO_TEST("minimal");
2012-08-15 08:16:36 +00:00
DO_TEST("machine-core-on");
DO_TEST("machine-core-off");
DO_TEST("default-kvm-host-arch");
DO_TEST("default-qemu-host-arch");
DO_TEST("boot-cdrom");
DO_TEST("boot-network");
DO_TEST("boot-floppy");
DO_TEST("boot-multi");
DO_TEST("boot-menu-enable-with-timeout");
DO_TEST("boot-menu-disable");
DO_TEST("boot-menu-disable-with-timeout");
DO_TEST("boot-order");
2012-09-18 10:32:07 +00:00
DO_TEST("reboot-timeout-enabled");
DO_TEST("reboot-timeout-disabled");
DO_TEST("clock-utc");
DO_TEST("clock-localtime");
DO_TEST("cpu-empty");
DO_TEST("cpu-kvmclock");
DO_TEST("cpu-host-kvmclock");
DO_TEST("cpu-host-passthrough-features");
DO_TEST("cpu-host-model-features");
DO_TEST("clock-catchup");
DO_TEST("kvmclock");
DO_TEST("clock-timer-hyperv-rtc");
DO_TEST("cpu-eoi-disabled");
DO_TEST("cpu-eoi-enabled");
DO_TEST("eoi-disabled");
DO_TEST("eoi-enabled");
DO_TEST("pv-spinlock-disabled");
DO_TEST("pv-spinlock-enabled");
DO_TEST("hyperv");
DO_TEST("hyperv-off");
DO_TEST("hyperv-panic");
DO_TEST("kvm-features");
DO_TEST("kvm-features-off");
DO_TEST("pmu-feature");
DO_TEST("pmu-feature-off");
DO_TEST("hugepages");
DO_TEST("hugepages-pages");
DO_TEST("hugepages-pages2");
DO_TEST("hugepages-pages3");
DO_TEST("hugepages-shared");
DO_TEST("nosharepages");
DO_TEST("restore-v2");
DO_TEST("migrate");
DO_TEST("qemu-ns-no-env");
DO_TEST("disk-aio");
DO_TEST("disk-cdrom");
DO_TEST("disk-cdrom-empty");
DO_TEST("disk-floppy");
DO_TEST("disk-many");
DO_TEST("disk-usb-device");
DO_TEST("disk-virtio");
DO_TEST("floppy-drive-fat");
DO_TEST("disk-drive-boot-disk");
DO_TEST("disk-drive-boot-cdrom");
DO_TEST("disk-drive-error-policy-stop");
DO_TEST("disk-drive-error-policy-enospace");
DO_TEST("disk-drive-error-policy-wreport-rignore");
DO_TEST("disk-drive-fmt-qcow");
DO_TEST("disk-drive-copy-on-read");
DO_TEST("disk-drive-cache-v2-wt");
DO_TEST("disk-drive-cache-v2-wb");
DO_TEST("disk-drive-cache-v2-none");
DO_TEST("disk-drive-cache-directsync");
DO_TEST("disk-drive-cache-unsafe");
DO_TEST("disk-drive-network-nbd");
DO_TEST("disk-drive-network-nbd-export");
DO_TEST("disk-drive-network-nbd-ipv6");
DO_TEST("disk-drive-network-nbd-ipv6-export");
DO_TEST("disk-drive-network-nbd-unix");
DO_TEST("disk-drive-network-iscsi");
DO_TEST("disk-drive-network-iscsi-auth");
DO_TEST("disk-drive-network-gluster");
DO_TEST("disk-drive-network-rbd");
DO_TEST("disk-drive-network-rbd-auth");
DO_TEST("disk-drive-network-rbd-ipv6");
DO_TEST("disk-drive-network-rbd-ceph-env");
DO_TEST("disk-drive-network-sheepdog");
DO_TEST_FULL("disk-scsi-device", WHEN_ACTIVE, GIC_NONE,
QEMU_CAPS_NODEFCONFIG,
QEMU_CAPS_SCSI_LSI);
DO_TEST("disk-scsi-vscsi");
DO_TEST_FULL("disk-scsi-virtio-scsi", WHEN_ACTIVE, GIC_NONE,
QEMU_CAPS_NODEFCONFIG,
QEMU_CAPS_VIRTIO_SCSI);
DO_TEST_FULL("disk-virtio-scsi-num_queues", WHEN_ACTIVE, GIC_NONE,
QEMU_CAPS_NODEFCONFIG,
QEMU_CAPS_VIRTIO_SCSI);
DO_TEST_FULL("disk-virtio-scsi-cmd_per_lun", WHEN_ACTIVE, GIC_NONE,
QEMU_CAPS_NODEFCONFIG,
QEMU_CAPS_VIRTIO_SCSI);
DO_TEST_FULL("disk-virtio-scsi-max_sectors", WHEN_ACTIVE, GIC_NONE,
QEMU_CAPS_NODEFCONFIG,
QEMU_CAPS_VIRTIO_SCSI);
DO_TEST_FULL("disk-virtio-scsi-ioeventfd", WHEN_ACTIVE, GIC_NONE,
QEMU_CAPS_NODEFCONFIG,
QEMU_CAPS_VIRTIO_SCSI);
DO_TEST_FULL("disk-scsi-megasas", WHEN_ACTIVE, GIC_NONE,
QEMU_CAPS_NODEFCONFIG,
QEMU_CAPS_SCSI_MEGASAS);
DO_TEST_FULL("disk-scsi-mptsas1068", WHEN_ACTIVE, GIC_NONE,
QEMU_CAPS_NODEFCONFIG,
QEMU_CAPS_SCSI_MPTSAS1068,
QEMU_CAPS_SCSI_DISK_WWN);
DO_TEST("disk-mirror-old");
DO_TEST_FULL("disk-mirror", WHEN_ACTIVE, GIC_NONE, NONE);
DO_TEST_FULL("disk-mirror", WHEN_INACTIVE, GIC_NONE, NONE);
DO_TEST_FULL("disk-active-commit", WHEN_ACTIVE, GIC_NONE, NONE);
conf: add <listen> subelement to domain <graphics> element Once it's plugged in, the <listen> element will be an optional replacement for the "listen" attribute that graphics elements already have. If the <listen> element is type='address', it will have an attribute called 'address' which will contain an IP address or dns name that the guest's display server should listen on. If, however, type='network', the <listen> element should have an attribute called 'network' that will be set to the name of a network configuration to get the IP address from. * docs/schemas/domain.rng: updated to allow the <listen> element * docs/formatdomain.html.in: document the <listen> element and its attributes. * src/conf/domain_conf.[hc]: 1) The domain parser, formatter, and data structure are modified to support 0 or more <listen> subelements to each <graphics> element. The old style "legacy" listen attribute is also still accepted, and will be stored internally just as if it were a separate <listen> element. On output (i.e. format), the address attribute of the first <listen> element of type 'address' will be duplicated in the legacy "listen" attribute of the <graphic> element. 2) The "listenAddr" attribute has been removed from the unions in virDomainGRaphicsDef for graphics types vnc, rdp, and spice. This attribute is now in the <listen> subelement (aka virDomainGraphicsListenDef) 3) Helper functions were written to provide simple access (both Get and Set) to the listen elements and their attributes. * src/libvirt_private.syms: export the listen helper functions * src/qemu/qemu_command.c, src/qemu/qemu_hotplug.c, src/qemu/qemu_migration.c, src/vbox/vbox_tmpl.c, src/vmx/vmx.c, src/xenxs/xen_sxpr.c, src/xenxs/xen_xm.c Modify all these files to use the listen helper functions rather than directly referencing the (now missing) listenAddr attribute. There can be multiple <listen> elements to a single <graphics>, but the drivers all currently only support one, so all replacements of direct access with a helper function indicate index "0". * tests/* - only 3 of these are new files added explicitly to test the new <listen> element. All the others have been modified to reflect the fact that any legacy "listen" attributes passed in to the domain parse will be saved in a <listen> element (i.e. one of the virDomainGraphicsListenDefs), and during the domain format function, both the <listen> element as well as the legacy attributes will be output.
2011-07-07 04:20:28 +00:00
DO_TEST("graphics-listen-network");
DO_TEST("graphics-vnc");
DO_TEST("graphics-vnc-websocket");
DO_TEST("graphics-vnc-sasl");
DO_TEST("graphics-vnc-tls");
DO_TEST("graphics-vnc-no-listen-attr");
DO_TEST("graphics-vnc-remove-generated-socket");
cfg->vncAutoUnixSocket = true;
DO_TEST("graphics-vnc-auto-socket-cfg");
cfg->vncAutoUnixSocket = false;
DO_TEST("graphics-vnc-socket");
DO_TEST("graphics-vnc-auto-socket");
DO_TEST("graphics-sdl");
DO_TEST("graphics-sdl-fullscreen");
DO_TEST("graphics-spice");
DO_TEST("graphics-spice-compression");
qemu: Support vram for video of qxl type For qemu names the primary vga as "qxl-vga": 1) if vram is specified for 2nd qxl device: -vga qxl -global qxl-vga.vram_size=$SIZE \ -device qxl,id=video1,vram_size=$SIZE,... 2) if vram is not specified for 2nd qxl device, (use the default set by global): -vga qxl -global qxl-vga.vram_size=$SIZE \ -device qxl,id=video1,... For qemu names all qxl devices as "qxl": 1) if vram is specified for 2nd qxl device: -vga qxl -global qxl.vram_size=$SIZE \ -device qxl,id=video1,vram_size=$SIZE ... 2) if vram is not specified for 2nd qxl device: -vga qxl -global qxl-vga.vram_size=$SIZE \ -device qxl,id=video1,... "-global" is the only way to define vram_size for the primary qxl device, regardless of how qemu names it, (It's not good a good way, as original idea of "-global" is to set a global default for a driver property, but to specify vram for first qxl device, we have to use it). For other qxl devices, as they are represented by "-device", could specify it directly and seperately for each, and it overrides the default set by "-global" if specified. v1 - v2: * modify "virDomainVideoDefaultRAM" so that it returns 16M as the default vram_size for qxl device. * vram_size * 1024 (qemu accepts bytes for vram_size). * apply default vram_size for qxl device for which vram_size is not specified. * modify "graphics-spice" tests (more sensiable vram_size) * Add an argument of virDomainDefPtr type for qemuBuildVideoDevStr, to use virDomainVideoDefaultRAM in qemuBuildVideoDevStr). v2 - v3: * Modify default video memory size for qxl device from 16M to 24M * Update codes to be consistent with changes on qemu_capabilities.*
2011-03-06 14:00:27 +00:00
DO_TEST("graphics-spice-qxl-vga");
DO_TEST("graphics-spice-socket");
DO_TEST("graphics-spice-auto-socket");
cfg->spiceAutoUnixSocket = true;
DO_TEST("graphics-spice-auto-socket-cfg");
cfg->spiceAutoUnixSocket = false;
DO_TEST("nographics-vga");
DO_TEST("input-usbmouse");
DO_TEST("input-usbtablet");
DO_TEST("misc-acpi");
DO_TEST("misc-disable-s3");
DO_TEST("misc-disable-suspends");
DO_TEST("misc-enable-s4");
DO_TEST("misc-no-reboot");
DO_TEST("misc-uuid");
DO_TEST("net-vhostuser");
DO_TEST("net-user");
DO_TEST("net-virtio");
Add txmode attribute to interface XML for virtio backend This is in response to: https://bugzilla.redhat.com/show_bug.cgi?id=629662 Explanation qemu's virtio-net-pci driver allows setting the algorithm used for tx packets to either "bh" or "timer". This is done by adding ",tx=bh" or ",tx=timer" to the "-device virtio-net-pci" commandline option. 'bh' stands for 'bottom half'; when this is set, packet tx is all done in an iothread in the bottom half of the driver. (In libvirt, this option is called the more descriptive "iothread".) 'timer' means that tx work is done in qemu, and if there is more tx data than can be sent at the present time, a timer is set before qemu moves on to do other things; when the timer fires, another attempt is made to send more data. (libvirt retains the name "timer" for this option.) The resulting difference, according to the qemu developer who added the option is: bh makes tx more asynchronous and reduces latency, but potentially causes more processor bandwidth contention since the cpu doing the tx isn't necessarily the cpu where the guest generated the packets. Solution This patch provides a libvirt domain xml knob to change the option on the qemu commandline, by adding a new attribute "txmode" to the <driver> element that can be placed inside any <interface> element in a domain definition. It's use would be something like this: <interface ...> ... <model type='virtio'/> <driver txmode='iothread'/> ... </interface> I chose to put this setting as an attribute to <driver> rather than as a sub-element to <tune> because it is specific to the virtio-net driver, not something that is generally usable by all network drivers. (note that this is the same placement as the "driver name=..." attribute used to choose kernel vs. userland backend for the virtio-net driver.) Actually adding the tx=xxx option to the qemu commandline is only done if the version of qemu being used advertises it in the output of qemu -device virtio-net-pci,? If a particular txmode is requested in the XML, and the option isn't listed in that help output, an UNSUPPORTED_CONFIG error is logged, and the domain fails to start.
2011-02-03 20:20:01 +00:00
DO_TEST("net-virtio-device");
DO_TEST("net-virtio-disable-offloads");
DO_TEST("net-eth");
DO_TEST("net-eth-ifname");
DO_TEST("net-virtio-network-portgroup");
conf: parse/format type='hostdev' network interfaces This is the new interface type that sets up an SR-IOV PCI network device to be assigned to the guest with PCI passthrough after initializing some network device-specific things from the config (e.g. MAC address, virtualport profile parameters). Here is an example of the syntax: <interface type='hostdev' managed='yes'> <source> <address type='pci' domain='0' bus='0' slot='4' function='3'/> </source> <mac address='00:11:22:33:44:55'/> <address type='pci' domain='0' bus='0' slot='7' function='0'/> </interface> This would assign the PCI card from bus 0 slot 4 function 3 on the host, to bus 0 slot 7 function 0 on the guest, but would first set the MAC address of the card to 00:11:22:33:44:55. NB: The parser and formatter don't care if the PCI card being specified is a standard single function network adapter, or a virtual function (VF) of an SR-IOV capable network adapter, but the upcoming code that implements the back end of this config will work *only* with SR-IOV VFs. This is because modifying the mac address of a standard network adapter prior to assigning it to a guest is pointless - part of the device reset that occurs during that process will reset the MAC address to the value programmed into the card's firmware. Although it's not supported by any of libvirt's hypervisor drivers, usb network hostdevs are also supported in the parser and formatter for completeness and consistency. <source> syntax is identical to that for plain <hostdev> devices, except that the <address> element should have "type='usb'" added if bus/device are specified: <interface type='hostdev'> <source> <address type='usb' bus='0' device='4'/> </source> <mac address='00:11:22:33:44:55'/> </interface> If the vendor/product form of usb specification is used, type='usb' is implied: <interface type='hostdev'> <source> <vendor id='0x0012'/> <product id='0x24dd'/> </source> <mac address='00:11:22:33:44:55'/> </interface> Again, the upcoming patch to fill in the backend of this functionality will log an error and fail with "Unsupported Config" if you actually try to assign a USB network adapter to a guest using <interface type='hostdev'> - just use a standard <hostdev> entry in that case (and also for single-port PCI adapters).
2012-02-15 17:37:15 +00:00
DO_TEST("net-hostdev");
DO_TEST("net-hostdev-vfio");
DO_TEST("net-midonet");
conf: add <vlan> element to network and domain interface elements The following config elements now support a <vlan> subelements: within a domain: <interface>, and the <actual> subelement of <interface> within a network: the toplevel, as well as any <portgroup> Each vlan element must have one or more <tag id='n'/> subelements. If there is more than one tag, it is assumed that vlan trunking is being requested. If trunking is required with only a single tag, the attribute "trunk='yes'" should be added to the toplevel <vlan> element. Some examples: <interface type='hostdev'/> <vlan> <tag id='42'/> </vlan> <mac address='52:54:00:12:34:56'/> ... </interface> <network> <name>vlan-net</name> <vlan trunk='yes'> <tag id='30'/> </vlan> <virtualport type='openvswitch'/> </network> <interface type='network'/> <source network='vlan-net'/> ... </interface> <network> <name>trunk-vlan</name> <vlan> <tag id='42'/> <tag id='43'/> </vlan> ... </network> <network> <name>multi</name> ... <portgroup name='production'/> <vlan> <tag id='42'/> </vlan> </portgroup> <portgroup name='test'/> <vlan> <tag id='666'/> </vlan> </portgroup> </network> <interface type='network'/> <source network='multi' portgroup='test'/> ... </interface> IMPORTANT NOTE: As of this patch there is no backend support for the vlan element for *any* network device type. When support is added in later patches, it will only be for those select network types that support setting up a vlan on the host side, without the guest's involvement. (For example, it will be possible to configure a vlan for a guest connected to an openvswitch bridge, but it won't be possible to do that for one that is connected to a standard Linux host bridge.)
2012-08-12 07:51:30 +00:00
DO_TEST("net-openvswitch");
DO_TEST("sound");
DO_TEST("sound-device");
DO_TEST("watchdog");
DO_TEST("net-bandwidth");
DO_TEST("net-bandwidth2");
DO_TEST("serial-vc");
DO_TEST("serial-pty");
DO_TEST("serial-dev");
DO_TEST("serial-file");
DO_TEST("serial-unix");
DO_TEST("serial-tcp");
DO_TEST("serial-udp");
DO_TEST("serial-tcp-telnet");
DO_TEST("serial-many");
DO_TEST("serial-spiceport");
DO_TEST("serial-spiceport-nospice");
DO_TEST("parallel-tcp");
DO_TEST("console-compat");
DO_TEST("console-compat2");
DO_TEST("console-virtio-many");
DO_TEST("channel-guestfwd");
DO_TEST("channel-virtio");
DO_TEST("channel-virtio-state");
2007-07-18 21:34:22 +00:00
DO_TEST("hostdev-usb-address");
DO_TEST("hostdev-pci-address");
DO_TEST("hostdev-vfio");
DO_TEST("pci-rom");
DO_TEST("pci-serial-dev-chardev");
DO_TEST("encrypted-disk");
DO_TEST("memtune");
DO_TEST("memtune-unlimited");
DO_TEST("blkiotune");
DO_TEST("blkiotune-device");
DO_TEST("cputune");
DO_TEST("cputune-zero-shares");
DO_TEST("cputune-iothreadsched");
DO_TEST("cputune-iothreadsched-zeropriority");
DO_TEST("cputune-numatune");
DO_TEST_FULL("vcpu-placement-static", WHEN_ACTIVE, GIC_NONE,
QEMU_CAPS_DEVICE_PCI_BRIDGE);
DO_TEST("smp");
DO_TEST("iothreads");
DO_TEST("iothreads-ids");
DO_TEST("iothreads-ids-partial");
DO_TEST("cputune-iothreads");
DO_TEST("iothreads-disk");
DO_TEST_FULL("iothreads-disk-virtio-ccw", WHEN_ACTIVE, GIC_NONE,
QEMU_CAPS_VIRTIO_CCW, QEMU_CAPS_VIRTIO_S390);
DO_TEST_FULL("iothreads-virtio-scsi-pci", WHEN_ACTIVE, GIC_NONE,
QEMU_CAPS_NODEFCONFIG,
QEMU_CAPS_VIRTIO_SCSI);
DO_TEST_FULL("iothreads-virtio-scsi-ccw", WHEN_ACTIVE, GIC_NONE,
QEMU_CAPS_VIRTIO_SCSI,
QEMU_CAPS_VIRTIO_CCW,
QEMU_CAPS_VIRTIO_S390);
DO_TEST("lease");
qemu: support event_idx parameter for virtio disk and net devices In some versions of qemu, both virtio-blk-pci and virtio-net-pci devices can have an event_idx setting that determines some details of event processing. When it is enabled, it "reduces the number of interrupts and exits for the guest". qemu will automatically enable this feature when it is available, but there may be cases where this new feature could actually make performance worse (NB: no such case has been found so far). As a safety switch in case such a situation is encountered in the field, this patch adds a new attribute "event_idx" to the <driver> element of both disk and interface devices. event_idx can be set to "on" (to force event_idx on in case qemu has it disabled by default) or "off" (for force event_idx off). In the case that event_idx support isn't present in qemu, the attribute is ignored (this on the advice of the qemu developer). docs/formatdomain.html.in: document the new flag (marking it as "don't mess with this!" docs/schemas/domain.rng: add event_idx in appropriate places src/conf/domain_conf.[ch]: add event_idx to parser and formatter src/libvirt_private.syms: export virDomainVirtioEventIdx(From|To)String src/qemu/qemu_capabilities.[ch]: detect and report event_idx in disk/net src/qemu/qemu_command.c: add event_idx parameter to qemu commandline when appropriate. tests/qemuxml2argvdata/qemuxml2argv-event_idx.args, tests/qemuxml2argvdata/qemuxml2argv-event_idx.xml, tests/qemuxml2argvtest.c, tests/qemuxml2xmltest.c: test cases for event_idx.
2011-08-13 06:32:45 +00:00
DO_TEST("event_idx");
DO_TEST("vhost_queues");
DO_TEST("interface-driver");
DO_TEST("interface-server");
qemu: add new disk device='lun' for bus='virtio' & type='block' In the past, generic SCSI commands issued from a guest to a virtio disk were always passed through to the underlying disk by qemu, and the kernel would also pass them on. As a result of CVE-2011-4127 (see: http://seclists.org/oss-sec/2011/q4/536), qemu now honors its scsi=on|off device option for virtio-blk-pci (which enables/disables passthrough of generic SCSI commands), and the kernel will only allow the commands for physical devices (not for partitions or logical volumes). The default behavior of qemu is still to allow sending generic SCSI commands to physical disks that are presented to a guest as virtio-blk-pci devices, but libvirt prefers to disable those commands in the standard virtio block devices, enabling it only when specifically requested (hopefully indicating that the requester understands what they're asking for). For this purpose, a new libvirt disk device type (device='lun') has been created. device='lun' is identical to the default device='disk', except that: 1) It is only allowed if bus='virtio', type='block', and the qemu version is "new enough" to support it ("new enough" == qemu 0.11 or better), otherwise the domain will fail to start and a CONFIG_UNSUPPORTED error will be logged). 2) The option "scsi=on" will be added to the -device arg to allow SG_IO commands (if device !='lun', "scsi=off" will be added to the -device arg so that SG_IO commands are specifically forbidden). Guests which continue to use disk device='disk' (the default) will no longer be able to use SG_IO commands on the disk; those that have their disk device changed to device='lun' will still be able to use SG_IO commands. *docs/formatdomain.html.in - document the new device attribute value. *docs/schemas/domaincommon.rng - allow it in the RNG *tests/* - update the args of several existing tests to add scsi=off, and add one new test that will test scsi=on. *src/conf/domain_conf.c - update domain XML parser and formatter *src/qemu/qemu_(command|driver|hotplug).c - treat VIR_DOMAIN_DISK_DEVICE_LUN *almost* identically to VIR_DOMAIN_DISK_DEVICE_DISK, except as indicated above. Note that no support for this new device value was added to any hypervisor drivers other than qemu, because it's unclear what it might mean (if anything) to those drivers.
2012-01-05 03:48:38 +00:00
DO_TEST("virtio-lun");
DO_TEST("usb-redir");
DO_TEST("usb-redir-filter");
DO_TEST("usb-redir-filter-version");
DO_TEST("blkdeviotune");
DO_TEST("controller-usb-order");
DO_TEST_FULL("seclabel-dynamic-baselabel", WHEN_INACTIVE, GIC_NONE, NONE);
DO_TEST_FULL("seclabel-dynamic-override", WHEN_INACTIVE, GIC_NONE, NONE);
DO_TEST_FULL("seclabel-dynamic-labelskip", WHEN_INACTIVE, GIC_NONE, NONE);
DO_TEST_FULL("seclabel-dynamic-relabel", WHEN_INACTIVE, GIC_NONE, NONE);
DO_TEST("seclabel-static");
DO_TEST_FULL("seclabel-static-labelskip", WHEN_ACTIVE, GIC_NONE, NONE);
DO_TEST("seclabel-none");
DO_TEST("seclabel-dac-none");
DO_TEST("seclabel-dynamic-none");
DO_TEST("seclabel-device-multiple");
DO_TEST_FULL("seclabel-dynamic-none-relabel", WHEN_INACTIVE, GIC_NONE, NONE);
numad: Set memory policy from numad advisory nodeset Though numad will manage the memory allocation of task dynamically, it wants management application (libvirt) to pre-set the memory policy according to the advisory nodeset returned from querying numad, (just like pre-bind CPU nodeset for domain process), and thus the performance could benefit much more from it. This patch introduces new XML tag 'placement', value 'auto' indicates whether to set the memory policy with the advisory nodeset from numad, and its value defaults to the value of <vcpu> placement, or 'static' if 'nodeset' is specified. Example of the new XML tag's usage: <numatune> <memory placement='auto' mode='interleave'/> </numatune> Just like what current "numatune" does, the 'auto' numa memory policy setting uses libnuma's API too. If <vcpu> "placement" is "auto", and <numatune> is not specified explicitly, a default <numatume> will be added with "placement" set as "auto", and "mode" set as "strict". The following XML can now fully drive numad: 1) <vcpu> placement is 'auto', no <numatune> is specified. <vcpu placement='auto'>10</vcpu> 2) <vcpu> placement is 'auto', no 'placement' is specified for <numatune>. <vcpu placement='auto'>10</vcpu> <numatune> <memory mode='interleave'/> </numatune> And it's also able to control the CPU placement and memory policy independently. e.g. 1) <vcpu> placement is 'auto', and <numatune> placement is 'static' <vcpu placement='auto'>10</vcpu> <numatune> <memory mode='strict' nodeset='0-10,^7'/> </numatune> 2) <vcpu> placement is 'static', and <numatune> placement is 'auto' <vcpu placement='static' cpuset='0-24,^12'>10</vcpu> <numatune> <memory mode='interleave' placement='auto'/> </numatume> A follow up patch will change the XML formatting codes to always output 'placement' for <vcpu>, even it's 'static'.
2012-05-08 16:04:34 +00:00
DO_TEST("numad-static-vcpu-no-numatune");
DO_TEST_FULL("disk-scsi-lun-passthrough-sgio", WHEN_ACTIVE, GIC_NONE,
QEMU_CAPS_NODEFCONFIG,
QEMU_CAPS_SCSI_CD, QEMU_CAPS_SCSI_LSI, QEMU_CAPS_VIRTIO_SCSI,
QEMU_CAPS_SCSI_DISK_WWN);
DO_TEST_FULL("disk-scsi-disk-vpd", WHEN_ACTIVE, GIC_NONE,
QEMU_CAPS_NODEFCONFIG,
QEMU_CAPS_SCSI_CD, QEMU_CAPS_SCSI_LSI, QEMU_CAPS_VIRTIO_SCSI,
QEMU_CAPS_SCSI_DISK_WWN);
DO_TEST("disk-source-pool");
DO_TEST("disk-source-pool-mode");
DO_TEST("disk-drive-discard");
DO_TEST("disk-drive-detect-zeroes");
DO_TEST("virtio-rng-random");
DO_TEST("virtio-rng-egd");
DO_TEST("pseries-nvram");
DO_TEST("pseries-panic-missing");
DO_TEST("pseries-panic-no-address");
DO_TEST("balloon-device-auto");
DO_TEST("balloon-device-period");
DO_TEST("channel-virtio-auto");
DO_TEST("console-compat-auto");
DO_TEST_FULL("disk-scsi-device-auto", WHEN_ACTIVE, GIC_NONE,
QEMU_CAPS_NODEFCONFIG,
QEMU_CAPS_SCSI_LSI);
DO_TEST("console-virtio");
DO_TEST("serial-target-port-auto");
DO_TEST("graphics-listen-network2");
DO_TEST("graphics-spice-timeout");
DO_TEST("numad-auto-vcpu-no-numatune");
DO_TEST("numad-auto-memory-vcpu-no-cpuset-and-placement");
DO_TEST("numad-auto-memory-vcpu-cpuset");
DO_TEST("usb-ich9-ehci-addr");
DO_TEST("disk-copy_on_read");
DO_TEST("tpm-passthrough");
DO_TEST("metadata");
DO_TEST("metadata-duplicate");
DO_TEST_FULL("pci-bridge", WHEN_ACTIVE, GIC_NONE,
QEMU_CAPS_DEVICE_PCI_BRIDGE);
DO_TEST_FULL("pci-bridge-many-disks", WHEN_ACTIVE, GIC_NONE,
QEMU_CAPS_DEVICE_PCI_BRIDGE);
DO_TEST_FULL("pci-autoadd-addr", WHEN_ACTIVE, GIC_NONE,
QEMU_CAPS_DEVICE_PCI_BRIDGE);
DO_TEST_FULL("pci-autoadd-idx", WHEN_ACTIVE, GIC_NONE,
QEMU_CAPS_DEVICE_PCI_BRIDGE);
DO_TEST("pci-autofill-addr");
DO_TEST_FULL("q35", WHEN_ACTIVE, GIC_NONE,
QEMU_CAPS_DEVICE_PCI_BRIDGE,
QEMU_CAPS_DEVICE_DMI_TO_PCI_BRIDGE,
QEMU_CAPS_ICH9_AHCI,
QEMU_CAPS_PCI_MULTIFUNCTION, QEMU_CAPS_ICH9_USB_EHCI1,
QEMU_CAPS_DEVICE_VIDEO_PRIMARY,
QEMU_CAPS_VGA_QXL, QEMU_CAPS_DEVICE_QXL);
DO_TEST_FULL("q35-usb2", WHEN_ACTIVE, GIC_NONE,
QEMU_CAPS_DEVICE_PCI_BRIDGE,
QEMU_CAPS_DEVICE_DMI_TO_PCI_BRIDGE,
QEMU_CAPS_ICH9_AHCI,
QEMU_CAPS_PCI_MULTIFUNCTION, QEMU_CAPS_ICH9_USB_EHCI1,
QEMU_CAPS_DEVICE_VIDEO_PRIMARY,
QEMU_CAPS_VGA_QXL, QEMU_CAPS_DEVICE_QXL);
DO_TEST_FULL("q35-usb2-multi", WHEN_ACTIVE, GIC_NONE,
QEMU_CAPS_DEVICE_PCI_BRIDGE,
QEMU_CAPS_DEVICE_DMI_TO_PCI_BRIDGE,
QEMU_CAPS_ICH9_AHCI,
QEMU_CAPS_PCI_MULTIFUNCTION, QEMU_CAPS_ICH9_USB_EHCI1,
QEMU_CAPS_DEVICE_VIDEO_PRIMARY,
QEMU_CAPS_VGA_QXL, QEMU_CAPS_DEVICE_QXL);
DO_TEST_FULL("q35-usb2-reorder", WHEN_ACTIVE, GIC_NONE,
QEMU_CAPS_DEVICE_PCI_BRIDGE,
QEMU_CAPS_DEVICE_DMI_TO_PCI_BRIDGE,
QEMU_CAPS_ICH9_AHCI,
QEMU_CAPS_PCI_MULTIFUNCTION, QEMU_CAPS_ICH9_USB_EHCI1,
QEMU_CAPS_DEVICE_VIDEO_PRIMARY,
QEMU_CAPS_VGA_QXL, QEMU_CAPS_DEVICE_QXL);
DO_TEST_FULL("pcie-root", WHEN_ACTIVE, GIC_NONE,
QEMU_CAPS_DEVICE_PCI_BRIDGE,
QEMU_CAPS_DEVICE_DMI_TO_PCI_BRIDGE,
QEMU_CAPS_DEVICE_IOH3420,
QEMU_CAPS_ICH9_AHCI,
QEMU_CAPS_DEVICE_VIDEO_PRIMARY,
QEMU_CAPS_VGA_QXL, QEMU_CAPS_DEVICE_QXL);
DO_TEST_FULL("pcie-root-port", WHEN_ACTIVE, GIC_NONE,
QEMU_CAPS_DEVICE_PCI_BRIDGE,
QEMU_CAPS_DEVICE_DMI_TO_PCI_BRIDGE,
QEMU_CAPS_DEVICE_IOH3420,
QEMU_CAPS_ICH9_AHCI,
QEMU_CAPS_DEVICE_VIDEO_PRIMARY,
QEMU_CAPS_VGA_QXL, QEMU_CAPS_DEVICE_QXL);
DO_TEST_FULL("pcie-switch-upstream-port", WHEN_ACTIVE, GIC_NONE,
QEMU_CAPS_DEVICE_PCI_BRIDGE,
QEMU_CAPS_DEVICE_DMI_TO_PCI_BRIDGE,
QEMU_CAPS_DEVICE_IOH3420,
QEMU_CAPS_ICH9_AHCI,
QEMU_CAPS_DEVICE_VIDEO_PRIMARY,
QEMU_CAPS_VGA_QXL, QEMU_CAPS_DEVICE_QXL);
DO_TEST_FULL("pcie-switch-downstream-port", WHEN_ACTIVE, GIC_NONE,
QEMU_CAPS_DEVICE_PCI_BRIDGE,
QEMU_CAPS_DEVICE_DMI_TO_PCI_BRIDGE,
QEMU_CAPS_DEVICE_IOH3420,
QEMU_CAPS_ICH9_AHCI,
QEMU_CAPS_DEVICE_VIDEO_PRIMARY,
QEMU_CAPS_VGA_QXL, QEMU_CAPS_DEVICE_QXL);
DO_TEST_FULL("pci-expander-bus", WHEN_ACTIVE, GIC_NONE,
QEMU_CAPS_DEVICE_PCI_BRIDGE,
QEMU_CAPS_DEVICE_PXB);
DO_TEST_FULL("pcie-expander-bus", WHEN_ACTIVE, GIC_NONE,
QEMU_CAPS_DEVICE_PCI_BRIDGE,
QEMU_CAPS_DEVICE_DMI_TO_PCI_BRIDGE,
QEMU_CAPS_DEVICE_IOH3420,
QEMU_CAPS_DEVICE_X3130_UPSTREAM,
QEMU_CAPS_DEVICE_XIO3130_DOWNSTREAM,
QEMU_CAPS_DEVICE_PXB_PCIE);
DO_TEST_FULL("autoindex", WHEN_ACTIVE, GIC_NONE,
QEMU_CAPS_DEVICE_PCI_BRIDGE,
QEMU_CAPS_DEVICE_DMI_TO_PCI_BRIDGE,
QEMU_CAPS_DEVICE_IOH3420,
QEMU_CAPS_DEVICE_X3130_UPSTREAM,
QEMU_CAPS_DEVICE_XIO3130_DOWNSTREAM,
QEMU_CAPS_ICH9_AHCI,
QEMU_CAPS_PCI_MULTIFUNCTION, QEMU_CAPS_ICH9_USB_EHCI1,
QEMU_CAPS_NEC_USB_XHCI);
DO_TEST_FULL("hostdev-scsi-lsi", WHEN_ACTIVE, GIC_NONE,
QEMU_CAPS_VIRTIO_SCSI, QEMU_CAPS_SCSI_LSI,
QEMU_CAPS_DEVICE_SCSI_GENERIC);
DO_TEST_FULL("hostdev-scsi-virtio-scsi", WHEN_ACTIVE, GIC_NONE,
QEMU_CAPS_VIRTIO_SCSI, QEMU_CAPS_SCSI_LSI,
QEMU_CAPS_DEVICE_SCSI_GENERIC);
DO_TEST_FULL("hostdev-scsi-readonly", WHEN_ACTIVE, GIC_NONE,
QEMU_CAPS_VIRTIO_SCSI, QEMU_CAPS_SCSI_LSI,
QEMU_CAPS_DEVICE_SCSI_GENERIC);
DO_TEST_FULL("hostdev-scsi-shareable", WHEN_ACTIVE, GIC_NONE,
QEMU_CAPS_VIRTIO_SCSI, QEMU_CAPS_SCSI_LSI,
QEMU_CAPS_DEVICE_SCSI_GENERIC);
DO_TEST_FULL("hostdev-scsi-sgio", WHEN_ACTIVE, GIC_NONE,
QEMU_CAPS_VIRTIO_SCSI, QEMU_CAPS_SCSI_LSI,
QEMU_CAPS_DEVICE_SCSI_GENERIC);
DO_TEST_FULL("hostdev-scsi-rawio", WHEN_ACTIVE, GIC_NONE,
QEMU_CAPS_VIRTIO_SCSI, QEMU_CAPS_SCSI_LSI,
QEMU_CAPS_DEVICE_SCSI_GENERIC);
DO_TEST_FULL("hostdev-scsi-autogen-address", WHEN_ACTIVE, GIC_NONE,
QEMU_CAPS_VIRTIO_SCSI, QEMU_CAPS_SCSI_LSI,
QEMU_CAPS_DEVICE_SCSI_GENERIC);
DO_TEST_FULL("hostdev-scsi-large-unit", WHEN_ACTIVE, GIC_NONE,
QEMU_CAPS_VIRTIO_SCSI, QEMU_CAPS_SCSI_LSI,
QEMU_CAPS_DEVICE_SCSI_GENERIC);
DO_TEST_FULL("hostdev-scsi-lsi-iscsi", WHEN_ACTIVE, GIC_NONE,
QEMU_CAPS_VIRTIO_SCSI, QEMU_CAPS_SCSI_LSI,
QEMU_CAPS_DEVICE_SCSI_GENERIC);
DO_TEST_FULL("hostdev-scsi-lsi-iscsi-auth", WHEN_ACTIVE, GIC_NONE,
QEMU_CAPS_VIRTIO_SCSI, QEMU_CAPS_SCSI_LSI,
QEMU_CAPS_DEVICE_SCSI_GENERIC);
DO_TEST_FULL("hostdev-scsi-virtio-iscsi", WHEN_ACTIVE, GIC_NONE,
QEMU_CAPS_VIRTIO_SCSI, QEMU_CAPS_SCSI_LSI,
QEMU_CAPS_DEVICE_SCSI_GENERIC);
DO_TEST_FULL("hostdev-scsi-virtio-iscsi-auth", WHEN_ACTIVE, GIC_NONE,
QEMU_CAPS_VIRTIO_SCSI, QEMU_CAPS_SCSI_LSI,
QEMU_CAPS_DEVICE_SCSI_GENERIC);
DO_TEST_FULL("s390-defaultconsole", WHEN_ACTIVE, GIC_NONE,
QEMU_CAPS_VIRTIO_CCW, QEMU_CAPS_VIRTIO_S390);
DO_TEST_FULL("s390-panic", WHEN_BOTH, GIC_NONE,
QEMU_CAPS_VIRTIO_CCW, QEMU_CAPS_VIRTIO_S390);
DO_TEST_FULL("s390-panic-missing", WHEN_BOTH, GIC_NONE,
QEMU_CAPS_VIRTIO_CCW, QEMU_CAPS_VIRTIO_S390);
DO_TEST_FULL("s390-panic-no-address", WHEN_BOTH, GIC_NONE,
QEMU_CAPS_VIRTIO_CCW, QEMU_CAPS_VIRTIO_S390);
DO_TEST("pcihole64");
DO_TEST("pcihole64-gib");
DO_TEST("pcihole64-none");
DO_TEST_FULL("pcihole64-q35", WHEN_ACTIVE, GIC_NONE,
QEMU_CAPS_DEVICE_PCI_BRIDGE,
QEMU_CAPS_DEVICE_DMI_TO_PCI_BRIDGE,
QEMU_CAPS_ICH9_AHCI,
QEMU_CAPS_DEVICE_VIDEO_PRIMARY,
QEMU_CAPS_VGA_QXL, QEMU_CAPS_DEVICE_QXL,
QEMU_CAPS_Q35_PCI_HOLE64_SIZE);
DO_TEST("panic");
DO_TEST("panic-isa");
DO_TEST("panic-pseries");
DO_TEST("panic-double");
DO_TEST("panic-no-address");
DO_TEST("disk-backing-chains");
DO_TEST("chardev-label");
DO_TEST("cpu-numa1");
DO_TEST("cpu-numa2");
DO_TEST("cpu-numa-no-memory-element");
DO_TEST("cpu-numa-disordered");
DO_TEST("cpu-numa-disjoint");
DO_TEST("cpu-numa-memshared");
DO_TEST("numatune-auto-prefer");
DO_TEST("numatune-memnode");
DO_TEST("numatune-memnode-no-memory");
DO_TEST("bios-nvram");
DO_TEST("bios-nvram-os-interleave");
DO_TEST("tap-vhost");
DO_TEST("tap-vhost-incorrect");
DO_TEST("shmem");
DO_TEST("smbios");
DO_TEST("smbios-multiple-type2");
DO_TEST_FULL("aarch64-aavmf-virtio-mmio", WHEN_ACTIVE, GIC_NONE,
QEMU_CAPS_NODEFCONFIG, QEMU_CAPS_DTB,
QEMU_CAPS_DEVICE_VIRTIO_MMIO,
QEMU_CAPS_DEVICE_VIRTIO_RNG, QEMU_CAPS_OBJECT_RNG_RANDOM);
DO_TEST_FULL("aarch64-virtio-pci-default", WHEN_ACTIVE, GIC_NONE,
QEMU_CAPS_NODEFCONFIG, QEMU_CAPS_DTB,
QEMU_CAPS_DEVICE_VIRTIO_MMIO,
QEMU_CAPS_DEVICE_VIRTIO_RNG, QEMU_CAPS_OBJECT_RNG_RANDOM,
QEMU_CAPS_OBJECT_GPEX, QEMU_CAPS_DEVICE_PCI_BRIDGE,
QEMU_CAPS_DEVICE_DMI_TO_PCI_BRIDGE, QEMU_CAPS_VIRTIO_SCSI);
DO_TEST_FULL("aarch64-virtio-pci-manual-addresses", WHEN_ACTIVE, GIC_NONE,
QEMU_CAPS_NODEFCONFIG, QEMU_CAPS_DTB,
QEMU_CAPS_DEVICE_VIRTIO_MMIO,
QEMU_CAPS_DEVICE_VIRTIO_RNG, QEMU_CAPS_OBJECT_RNG_RANDOM,
QEMU_CAPS_OBJECT_GPEX, QEMU_CAPS_DEVICE_PCI_BRIDGE,
QEMU_CAPS_DEVICE_DMI_TO_PCI_BRIDGE, QEMU_CAPS_VIRTIO_SCSI);
DO_TEST_FULL("aarch64-gic-none", WHEN_BOTH, GIC_NONE, NONE);
DO_TEST_FULL("aarch64-gic-none-v2", WHEN_BOTH, GIC_V2, NONE);
DO_TEST_FULL("aarch64-gic-none-v3", WHEN_BOTH, GIC_V3, NONE);
DO_TEST_FULL("aarch64-gic-none-both", WHEN_BOTH, GIC_BOTH, NONE);
DO_TEST_FULL("aarch64-gic-default", WHEN_BOTH, GIC_NONE, NONE);
DO_TEST_FULL("aarch64-gic-default", WHEN_BOTH, GIC_V2, NONE);
DO_TEST_FULL("aarch64-gic-default", WHEN_BOTH, GIC_V3, NONE);
DO_TEST_FULL("aarch64-gic-default", WHEN_BOTH, GIC_BOTH, NONE);
DO_TEST_FULL("aarch64-gic-v2", WHEN_BOTH, GIC_NONE, NONE);
DO_TEST_FULL("aarch64-gic-v2", WHEN_BOTH, GIC_V2, NONE);
DO_TEST_FULL("aarch64-gic-v2", WHEN_BOTH, GIC_V3, NONE);
DO_TEST_FULL("aarch64-gic-v2", WHEN_BOTH, GIC_BOTH, NONE);
DO_TEST_FULL("aarch64-gic-v3", WHEN_BOTH, GIC_NONE, NONE);
DO_TEST_FULL("aarch64-gic-v3", WHEN_BOTH, GIC_V2, NONE);
DO_TEST_FULL("aarch64-gic-v3", WHEN_BOTH, GIC_V3, NONE);
DO_TEST_FULL("aarch64-gic-v3", WHEN_BOTH, GIC_BOTH, NONE);
DO_TEST_FULL("aarch64-gic-host", WHEN_BOTH, GIC_NONE, NONE);
DO_TEST_FULL("aarch64-gic-host", WHEN_BOTH, GIC_V2, NONE);
DO_TEST_FULL("aarch64-gic-host", WHEN_BOTH, GIC_V3, NONE);
DO_TEST_FULL("aarch64-gic-host", WHEN_BOTH, GIC_BOTH, NONE);
DO_TEST("memory-hotplug");
DO_TEST("memory-hotplug-nonuma");
DO_TEST("memory-hotplug-dimm");
DO_TEST("net-udp");
DO_TEST("video-virtio-gpu-device");
DO_TEST("video-virtio-gpu-virgl");
DO_TEST("video-virtio-gpu-spice-gl");
DO_TEST("virtio-input");
DO_TEST("virtio-input-passthrough");
virObjectUnref(cfg);
DO_TEST("acpi-table");
DO_TEST("video-qxl-heads");
DO_TEST("video-qxl-noheads");
qemuTestDriverFree(&driver);
2007-07-18 21:34:22 +00:00
return ret == 0 ? EXIT_SUCCESS : EXIT_FAILURE;
2007-07-18 21:34:22 +00:00
}
VIRT_TEST_MAIN(mymain)
#else
int
main(void)
{
return EXIT_AM_SKIP;
}
#endif /* WITH_QEMU */