libvirt/tools/Makefile.am

364 lines
11 KiB
Makefile
Raw Normal View History

build: add $(prefix) to SYSTEMD_UNIT_DIR I noticed this problem when adding systemd support to netcf, because I setup the configure.ac to automatically prefer using systemd over initscripts when possible - although I had copied the install-data-local target from the example of libvirt's "libvirt-guests" service more or less verbatim, "make distcheck" would fail because it was trying to install the service file directly into /lib/systemd/system rather than into /home/user/some/unimportant/name/lib/systemd/system. This is caused by the install/uninstall rules for the systemd unit files relying on $(DESTDIR) pointing the installed files to the right place, but in reality $(DESTDIR) is empty during this part of make distcheck - it instead sets $(prefix) with the toplevel directory used for its test build/install/uninstall cycle. (This problem hasn't been seen when running "make distcheck" in libvirt because libvirt will never build/install systemd support unless explicitly told to do so on the configure commandline, and "make distcheck" doesn't put the "--with-initscript=..." option on the configure commandline.) I verified that the same problem does exist in libvirt by modifying libvirt's configure.ac to set: init_systemd=yes with_init_script=systemd+redhat This forces a build/install of the systemd unit files during distcheck, which yields an error like this: /usr/bin/install -c -m 644 virtlockd.service \ /lib/systemd/system/ libtool: install: warning: relinking `libvirt-qemu.la' /usr/bin/install: cannot remove '/lib/systemd/system/virtlockd.service': Permission denied make[4]: *** [install-systemd] Error 1 After adding $(prefix) to all the definitions of SYSTEMD_UNIT_DIR, make distcheck now completes successfully with the modified configure.ac, and the above lines change to something like this: /usr/bin/install -c -m 644 virtlockd.service \ /home/laine/devel/libvirt/libvirt-1.2.1/_inst/lib/systemd/system/
2014-01-17 12:11:58 +00:00
## Copyright (C) 2005-2014 Red Hat, Inc.
maint: use LGPL correctly Several files called out COPYING or COPYING.LIB instead of using the normal boilerplate. It's especially important that we don't call out COPYING from an LGPL file, since COPYING is traditionally used for the GPL. A few files were lacking copyright altogether. * src/rpc/gendispatch.pl: Add missing copyright. * Makefile.nonreentrant: Likewise. * src/check-symfile.pl: Likewise. * src/check-symsorting.pl: Likewise. * src/driver.h: Likewise. * src/internal.h: Likewise. * tools/libvirt-guests.sh.in: Likewise. * tools/virt-pki-validate.in: Mention copyright in comment, not just code. * tools/virt-sanlock-cleanup.in: Likewise. * src/rpc/genprotocol.pl: Spell out license terms. * src/xen/xend_internal.h: Likewise. * src/xen/xend_internal.c: Likewise. * Makefile.am: Likewise. * daemon/Makefile.am: Likewise. * docs/Makefile.am: Likewise. * docs/schemas/Makefile.am: Likewise. * examples/apparmor/Makefile.am: Likewise. * examples/domain-events/events-c/Makefile.am: Likewise. * examples/dominfo/Makefile.am: Likewise. * examples/domsuspend/Makefile.am: Likewise. * examples/hellolibvirt/Makefile.am: Likewise. * examples/openauth/Makefile.am: Likewise. * examples/python/Makefile.am: Likewise. * examples/systemtap/Makefile.am: Likewise. * examples/xml/nwfilter/Makefile.am: Likewise. * gnulib/lib/Makefile.am: Likewise. * gnulib/tests/Makefile.am: Likewise. * include/Makefile.am: Likewise. * include/libvirt/Makefile.am: Likewise. * python/Makefile.am: Likewise. * python/tests/Makefile.am: Likewise. * src/Makefile.am: Likewise. * tests/Makefile.am: Likewise. * tools/Makefile.am: Likewise. * configure.ac: Likewise. Signed-off-by: Eric Blake <eblake@redhat.com>
2013-05-14 23:42:12 +00:00
##
## This library is free software; you can redistribute it and/or
## modify it under the terms of the GNU Lesser General Public
## License as published by the Free Software Foundation; either
## version 2.1 of the License, or (at your option) any later version.
##
## This library is distributed in the hope that it will be useful,
## but WITHOUT ANY WARRANTY; without even the implied warranty of
## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
## Lesser General Public License for more details.
##
## You should have received a copy of the GNU Lesser General Public
## License along with this library. If not, see
## <http://www.gnu.org/licenses/>.
INCLUDES = \
-I$(top_builddir)/include -I$(top_srcdir)/include \
-I$(top_builddir)/gnulib/lib -I$(top_srcdir)/gnulib/lib \
-I$(top_builddir)/src -I$(top_srcdir)/src \
-I$(top_srcdir)/src/util \
-I$(top_srcdir) \
$(GETTEXT_CPPFLAGS)
AM_LDFLAGS = \
$(RELRO_LDFLAGS) \
$(NO_INDIRECT_LDFLAGS) \
$(NULL)
POD2MAN = pod2man -c "Virtualization Support" -r "$(PACKAGE)-$(VERSION)"
ICON_FILES = \
libvirt_win_icon_16x16.ico \
libvirt_win_icon_32x32.ico \
libvirt_win_icon_48x48.ico \
libvirt_win_icon_64x64.ico \
virsh_win_icon.rc
EXTRA_DIST = \
$(ICON_FILES) \
$(conf_DATA) \
virt-xml-validate.in \
virt-pki-validate.in \
Support automatic creation of leases for disks in sanlock The current sanlock plugin requires a central management application to manually add <lease> elements to each guest, to protect resources that are assigned to it (eg writable disks). This makes the sanlock plugin useless for usage in more ad hoc deployment environments where there is no central authority to associate disks with leases. This patch adds a mode where the sanlock plugin will automatically create leases for each assigned read-write disk, using a md5 checksum of the fully qualified disk path. This can work pretty well if guests are using stable disk paths for block devices eg /dev/disk/by-path/XXXX symlinks, or if all hosts have NFS volumes mounted in a consistent pattern. The plugin will create one lockspace for managing disks with filename /var/lib/libvirt/sanlock/__LIBVIRT__DISKS__. For each VM disks, there will be another file to hold a lease /var/lib/libvirt/sanlock/5903e5d25e087e60a20fe4566fab41fd Each VM disk lease is usually 1 MB in size. The script virt-sanlock-cleanup should be run periodically to remove unused lease files from the lockspace directory. To make use of this capability the admin will need to do several tasks: - Mount an NFS volume (or other shared filesystem) on /var/lib/libvirt/sanlock - Configure 'host_id' in /etc/libvirt/qemu-sanlock.conf with a unique value for each host with the same NFS mount - Toggle the 'auto_disk_leases' parameter in qemu-sanlock.conf Technically the first step can be skipped, in which case sanlock will only protect against 2 vms on the same host using the same disk (or the same VM being started twice due to error by libvirt). * src/locking/libvirt_sanlock.aug, src/locking/sanlock.conf, src/locking/test_libvirt_sanlock.aug: Add config params for configuring auto lease setup * libvirt.spec.in: Add virt-sanlock-cleanup program, man page * tools/virt-sanlock-cleanup.in: Script to purge unused disk resource lease files
2011-06-14 08:29:00 +00:00
virt-sanlock-cleanup.in \
virt-sanlock-cleanup.8 \
virt-login-shell.pod \
virsh.pod \
libvirt-guests.sysconf \
virsh-edit.c \
virsh-domain.c \
virsh-domain-monitor.c \
virsh-host.c virsh-interface.c \
virsh-network.c virsh-nodedev.c \
virsh-nwfilter.c virsh-pool.c \
virsh-secret.c virsh-snapshot.c \
virsh-volume.c
DISTCLEANFILES =
confdir = $(sysconfdir)/libvirt
conf_DATA =
bin_SCRIPTS = virt-xml-validate virt-pki-validate
bin_PROGRAMS = virsh virt-host-validate
libexec_SCRIPTS = libvirt-guests.sh
if WITH_SANLOCK
Support automatic creation of leases for disks in sanlock The current sanlock plugin requires a central management application to manually add <lease> elements to each guest, to protect resources that are assigned to it (eg writable disks). This makes the sanlock plugin useless for usage in more ad hoc deployment environments where there is no central authority to associate disks with leases. This patch adds a mode where the sanlock plugin will automatically create leases for each assigned read-write disk, using a md5 checksum of the fully qualified disk path. This can work pretty well if guests are using stable disk paths for block devices eg /dev/disk/by-path/XXXX symlinks, or if all hosts have NFS volumes mounted in a consistent pattern. The plugin will create one lockspace for managing disks with filename /var/lib/libvirt/sanlock/__LIBVIRT__DISKS__. For each VM disks, there will be another file to hold a lease /var/lib/libvirt/sanlock/5903e5d25e087e60a20fe4566fab41fd Each VM disk lease is usually 1 MB in size. The script virt-sanlock-cleanup should be run periodically to remove unused lease files from the lockspace directory. To make use of this capability the admin will need to do several tasks: - Mount an NFS volume (or other shared filesystem) on /var/lib/libvirt/sanlock - Configure 'host_id' in /etc/libvirt/qemu-sanlock.conf with a unique value for each host with the same NFS mount - Toggle the 'auto_disk_leases' parameter in qemu-sanlock.conf Technically the first step can be skipped, in which case sanlock will only protect against 2 vms on the same host using the same disk (or the same VM being started twice due to error by libvirt). * src/locking/libvirt_sanlock.aug, src/locking/sanlock.conf, src/locking/test_libvirt_sanlock.aug: Add config params for configuring auto lease setup * libvirt.spec.in: Add virt-sanlock-cleanup program, man page * tools/virt-sanlock-cleanup.in: Script to purge unused disk resource lease files
2011-06-14 08:29:00 +00:00
sbin_SCRIPTS = virt-sanlock-cleanup
DISTCLEANFILES += virt-sanlock-cleanup
endif WITH_SANLOCK
if WITH_LXC
conf_DATA += virt-login-shell.conf
bin_PROGRAMS += virt-login-shell
else ! WITH_LXC
EXTRA_DIST += virt-login-shell.conf
endif ! WITH_LXC
dist_man1_MANS = \
virt-host-validate.1 \
virt-pki-validate.1 \
virt-xml-validate.1 \
virsh.1
if WITH_LXC
dist_man1_MANS += virt-login-shell.1
else ! WITH_LXC
EXTRA_DIST += virt-login-shell.1
endif ! WITH_LXC
if WITH_SANLOCK
Support automatic creation of leases for disks in sanlock The current sanlock plugin requires a central management application to manually add <lease> elements to each guest, to protect resources that are assigned to it (eg writable disks). This makes the sanlock plugin useless for usage in more ad hoc deployment environments where there is no central authority to associate disks with leases. This patch adds a mode where the sanlock plugin will automatically create leases for each assigned read-write disk, using a md5 checksum of the fully qualified disk path. This can work pretty well if guests are using stable disk paths for block devices eg /dev/disk/by-path/XXXX symlinks, or if all hosts have NFS volumes mounted in a consistent pattern. The plugin will create one lockspace for managing disks with filename /var/lib/libvirt/sanlock/__LIBVIRT__DISKS__. For each VM disks, there will be another file to hold a lease /var/lib/libvirt/sanlock/5903e5d25e087e60a20fe4566fab41fd Each VM disk lease is usually 1 MB in size. The script virt-sanlock-cleanup should be run periodically to remove unused lease files from the lockspace directory. To make use of this capability the admin will need to do several tasks: - Mount an NFS volume (or other shared filesystem) on /var/lib/libvirt/sanlock - Configure 'host_id' in /etc/libvirt/qemu-sanlock.conf with a unique value for each host with the same NFS mount - Toggle the 'auto_disk_leases' parameter in qemu-sanlock.conf Technically the first step can be skipped, in which case sanlock will only protect against 2 vms on the same host using the same disk (or the same VM being started twice due to error by libvirt). * src/locking/libvirt_sanlock.aug, src/locking/sanlock.conf, src/locking/test_libvirt_sanlock.aug: Add config params for configuring auto lease setup * libvirt.spec.in: Add virt-sanlock-cleanup program, man page * tools/virt-sanlock-cleanup.in: Script to purge unused disk resource lease files
2011-06-14 08:29:00 +00:00
dist_man8_MANS = virt-sanlock-cleanup.8
endif WITH_SANLOCK
virt-xml-validate: virt-xml-validate.in Makefile
$(AM_V_GEN)sed -e 's|[@]schemadir@|$(pkgdatadir)/schemas|g' \
-e 's|[@]VERSION@|$(VERSION)|g' \
< $< > $@ || (rm $@ && exit 1) && chmod +x $@
virt-xml-validate.1: virt-xml-validate.in $(top_srcdir)/configure.ac
$(AM_V_GEN)$(POD2MAN) --name VIRT-XML-VALIDATE $< $(srcdir)/$@ \
&& if grep 'POD ERROR' $(srcdir)/$@ ; then \
rm $(srcdir)/$@; exit 1; fi
virt-pki-validate: virt-pki-validate.in Makefile
$(AM_V_GEN)sed -e 's|[@]sysconfdir@|$(sysconfdir)|g' \
-e 's|[@]VERSION@|$(VERSION)|g' \
< $< > $@ || (rm $@ && exit 1) && chmod +x $@
virt-pki-validate.1: virt-pki-validate.in $(top_srcdir)/configure.ac
$(AM_V_GEN)$(POD2MAN) --name VIRT-PKI-VALIDATE $< $(srcdir)/$@ \
&& if grep 'POD ERROR' $(srcdir)/$@ ; then \
rm $(srcdir)/$@; exit 1; fi
virt-host-validate.1: virt-host-validate.c $(top_srcdir)/configure.ac
$(AM_V_GEN)$(POD2MAN) --name VIRT-HOST-VALIDATE $< $(srcdir)/$@ \
&& if grep 'POD ERROR' $(srcdir)/$@ ; then \
rm $(srcdir)/$@; exit 1; fi
Support automatic creation of leases for disks in sanlock The current sanlock plugin requires a central management application to manually add <lease> elements to each guest, to protect resources that are assigned to it (eg writable disks). This makes the sanlock plugin useless for usage in more ad hoc deployment environments where there is no central authority to associate disks with leases. This patch adds a mode where the sanlock plugin will automatically create leases for each assigned read-write disk, using a md5 checksum of the fully qualified disk path. This can work pretty well if guests are using stable disk paths for block devices eg /dev/disk/by-path/XXXX symlinks, or if all hosts have NFS volumes mounted in a consistent pattern. The plugin will create one lockspace for managing disks with filename /var/lib/libvirt/sanlock/__LIBVIRT__DISKS__. For each VM disks, there will be another file to hold a lease /var/lib/libvirt/sanlock/5903e5d25e087e60a20fe4566fab41fd Each VM disk lease is usually 1 MB in size. The script virt-sanlock-cleanup should be run periodically to remove unused lease files from the lockspace directory. To make use of this capability the admin will need to do several tasks: - Mount an NFS volume (or other shared filesystem) on /var/lib/libvirt/sanlock - Configure 'host_id' in /etc/libvirt/qemu-sanlock.conf with a unique value for each host with the same NFS mount - Toggle the 'auto_disk_leases' parameter in qemu-sanlock.conf Technically the first step can be skipped, in which case sanlock will only protect against 2 vms on the same host using the same disk (or the same VM being started twice due to error by libvirt). * src/locking/libvirt_sanlock.aug, src/locking/sanlock.conf, src/locking/test_libvirt_sanlock.aug: Add config params for configuring auto lease setup * libvirt.spec.in: Add virt-sanlock-cleanup program, man page * tools/virt-sanlock-cleanup.in: Script to purge unused disk resource lease files
2011-06-14 08:29:00 +00:00
virt-sanlock-cleanup: virt-sanlock-cleanup.in Makefile
$(AM_V_GEN)sed -e 's|[@]sysconfdir@|$(sysconfdir)|' \
-e 's|[@]localstatedir@|$(localstatedir)|' < $< > $@ \
Support automatic creation of leases for disks in sanlock The current sanlock plugin requires a central management application to manually add <lease> elements to each guest, to protect resources that are assigned to it (eg writable disks). This makes the sanlock plugin useless for usage in more ad hoc deployment environments where there is no central authority to associate disks with leases. This patch adds a mode where the sanlock plugin will automatically create leases for each assigned read-write disk, using a md5 checksum of the fully qualified disk path. This can work pretty well if guests are using stable disk paths for block devices eg /dev/disk/by-path/XXXX symlinks, or if all hosts have NFS volumes mounted in a consistent pattern. The plugin will create one lockspace for managing disks with filename /var/lib/libvirt/sanlock/__LIBVIRT__DISKS__. For each VM disks, there will be another file to hold a lease /var/lib/libvirt/sanlock/5903e5d25e087e60a20fe4566fab41fd Each VM disk lease is usually 1 MB in size. The script virt-sanlock-cleanup should be run periodically to remove unused lease files from the lockspace directory. To make use of this capability the admin will need to do several tasks: - Mount an NFS volume (or other shared filesystem) on /var/lib/libvirt/sanlock - Configure 'host_id' in /etc/libvirt/qemu-sanlock.conf with a unique value for each host with the same NFS mount - Toggle the 'auto_disk_leases' parameter in qemu-sanlock.conf Technically the first step can be skipped, in which case sanlock will only protect against 2 vms on the same host using the same disk (or the same VM being started twice due to error by libvirt). * src/locking/libvirt_sanlock.aug, src/locking/sanlock.conf, src/locking/test_libvirt_sanlock.aug: Add config params for configuring auto lease setup * libvirt.spec.in: Add virt-sanlock-cleanup program, man page * tools/virt-sanlock-cleanup.in: Script to purge unused disk resource lease files
2011-06-14 08:29:00 +00:00
|| (rm $@ && exit 1) && chmod +x $@
virt-sanlock-cleanup.8: virt-sanlock-cleanup.in $(top_srcdir)/configure.ac
$(AM_V_GEN)$(POD2MAN) --name VIRT-SANLOCK-CLEANUP --section=8 \
$< $(srcdir)/$@ \
&& if grep 'POD ERROR' $(srcdir)/$@ ; then \
rm $(srcdir)/$@; exit 1; fi
Support automatic creation of leases for disks in sanlock The current sanlock plugin requires a central management application to manually add <lease> elements to each guest, to protect resources that are assigned to it (eg writable disks). This makes the sanlock plugin useless for usage in more ad hoc deployment environments where there is no central authority to associate disks with leases. This patch adds a mode where the sanlock plugin will automatically create leases for each assigned read-write disk, using a md5 checksum of the fully qualified disk path. This can work pretty well if guests are using stable disk paths for block devices eg /dev/disk/by-path/XXXX symlinks, or if all hosts have NFS volumes mounted in a consistent pattern. The plugin will create one lockspace for managing disks with filename /var/lib/libvirt/sanlock/__LIBVIRT__DISKS__. For each VM disks, there will be another file to hold a lease /var/lib/libvirt/sanlock/5903e5d25e087e60a20fe4566fab41fd Each VM disk lease is usually 1 MB in size. The script virt-sanlock-cleanup should be run periodically to remove unused lease files from the lockspace directory. To make use of this capability the admin will need to do several tasks: - Mount an NFS volume (or other shared filesystem) on /var/lib/libvirt/sanlock - Configure 'host_id' in /etc/libvirt/qemu-sanlock.conf with a unique value for each host with the same NFS mount - Toggle the 'auto_disk_leases' parameter in qemu-sanlock.conf Technically the first step can be skipped, in which case sanlock will only protect against 2 vms on the same host using the same disk (or the same VM being started twice due to error by libvirt). * src/locking/libvirt_sanlock.aug, src/locking/sanlock.conf, src/locking/test_libvirt_sanlock.aug: Add config params for configuring auto lease setup * libvirt.spec.in: Add virt-sanlock-cleanup program, man page * tools/virt-sanlock-cleanup.in: Script to purge unused disk resource lease files
2011-06-14 08:29:00 +00:00
noinst_LTLIBRARIES = libvirt_shell.la
libvirt_shell_la_CFLAGS = \
$(AM_CFLAGS) \
$(PIE_CFLAGS) \
$(READLINE_CFLAGS) \
$(LIBXML_CFLAGS) \
$(NULL)
libvirt_shell_la_LDFLAGS = \
$(AM_LDFLAGS) \
$(PIE_LDFLAGS) \
$(COVERAGE_LDFLAGS) \
$(NULL)
libvirt_shell_la_LIBADD = \
$(LIBXML_LIBS) \
$(READLINE_LIBS) \
../src/libvirt.la \
../gnulib/lib/libgnu.la \
$(NULL)
libvirt_shell_la_SOURCES = vsh.c vsh.h
virt_host_validate_SOURCES = \
virt-host-validate.c \
virt-host-validate-common.c virt-host-validate-common.h \
virt-host-validate-qemu.c virt-host-validate-qemu.h \
virt-host-validate-lxc.c virt-host-validate-lxc.h \
$(NULL)
virt_host_validate_LDFLAGS = \
$(AM_LDFLAGS) \
$(PIE_LDFLAGS) \
$(COVERAGE_LDFLAGS) \
$(NULL)
virt_host_validate_LDADD = \
../src/libvirt.la \
../gnulib/lib/libgnu.la \
$(NULL)
virt_host_validate_CFLAGS = \
$(LIBXML_CFLAGS) \
$(WARN_CFLAGS) \
$(PIE_CFLAGS) \
$(COVERAGE_CFLAGS) \
$(NULL)
# Since virt-login-shell will be setuid, we must do everything
# we can to avoid linking to other libraries. Many of them do
# unsafe things in functions marked __atttribute__((constructor)).
# This we statically link to a library containing only the minimal
# libvirt client code, not libvirt.so itself.
virt_login_shell_SOURCES = \
virt-login-shell.c
virt_login_shell_LDFLAGS = \
$(AM_LDFLAGS) \
$(COVERAGE_LDFLAGS) \
$(NULL)
virt_login_shell_LDADD = \
$(STATIC_BINARIES) \
$(PIE_LDFLAGS) \
../src/libvirt-setuid-rpc-client.la \
../gnulib/lib/libgnu.la
virt_login_shell_CFLAGS = \
-DLIBVIRT_SETUID_RPC_CLIENT \
$(LIBXML_CFLAGS) \
$(WARN_CFLAGS) \
$(PIE_CFLAGS) \
$(COVERAGE_CFLAGS)
virsh_SOURCES = \
virsh.c virsh.h \
virsh-console.c virsh-console.h \
virsh-domain.c virsh-domain.h \
virsh-domain-monitor.c virsh-domain-monitor.h \
virsh-host.c virsh-host.h \
virsh-interface.c virsh-interface.h \
virsh-network.c virsh-network.h \
virsh-nodedev.c virsh-nodedev.h \
virsh-nwfilter.c virsh-nwfilter.h \
virsh-pool.c virsh-pool.h \
virsh-secret.c virsh-secret.h \
virsh-snapshot.c virsh-snapshot.h \
virsh-volume.c virsh-volume.h \
$(NULL)
virsh_LDFLAGS = \
$(AM_LDFLAGS) \
$(COVERAGE_LDFLAGS) \
$(NULL)
virsh_LDADD = \
$(STATIC_BINARIES) \
$(PIE_LDFLAGS) \
../src/libvirt-lxc.la \
../src/libvirt-qemu.la \
libvirt_shell.la
virsh_CFLAGS = \
2010-03-16 10:51:36 +00:00
$(WARN_CFLAGS) \
$(PIE_CFLAGS) \
$(COVERAGE_CFLAGS) \
$(LIBXML_CFLAGS)
BUILT_SOURCES =
if WITH_WIN_ICON
virsh_LDADD += virsh_win_icon.$(OBJEXT)
# Before you edit virsh_win_icon.rc, please note the following
# limitations of the resource file format:
#
# (1) '..' is not permitted in the icon filename field.
# (2) '-' is not permitted in the icon filename field.
# (3) Comments are not permitted in the file.
#
# Windows appears to choose the first <= 32x32 icon it finds
# in the resource file. Therefore you should list the available
# icons from largest to smallest, and make sure that the 32x32
# icon is the most legible.
#
# Windows .ICO is a special MS-only format. GIMP and other
# tools can write it. However there are several variations,
# and Windows seems to do its own colour quantization. More
# information is needed in this area.
virsh_win_icon.$(OBJEXT): virsh_win_icon.rc
$(AM_V_GEN)$(WINDRES) \
--input-format rc --input $< \
--output-format coff --output $@
endif WITH_WIN_ICON
virt-login-shell.1: virt-login-shell.pod $(top_srcdir)/configure.ac
$(AM_V_GEN)$(POD2MAN) $< $(srcdir)/$@ \
&& if grep 'POD ERROR' $(srcdir)/$@ ; then \
rm $(srcdir)/$@; exit 1; fi
virsh.1: virsh.pod $(top_srcdir)/configure.ac
$(AM_V_GEN)$(POD2MAN) $< $(srcdir)/$@ \
&& if grep 'POD ERROR' $(srcdir)/$@ ; then \
rm $(srcdir)/$@; exit 1; fi
install-data-local: install-init install-systemd
uninstall-local: uninstall-init uninstall-systemd
install-sysconfig:
$(MKDIR_P) $(DESTDIR)$(sysconfdir)/sysconfig
$(INSTALL_DATA) $(srcdir)/libvirt-guests.sysconf \
$(DESTDIR)$(sysconfdir)/sysconfig/libvirt-guests
uninstall-sysconfig:
rm -f $(DESTDIR)$(sysconfdir)/sysconfig/libvirt-guests
rmdir $(DESTDIR)$(sysconfdir)/sysconfig ||:
EXTRA_DIST += libvirt-guests.sh.in libvirt-guests.init.in
install-initscript: libvirt-guests.init
$(MKDIR_P) $(DESTDIR)$(sysconfdir)/rc.d/init.d
$(INSTALL_SCRIPT) libvirt-guests.init \
$(DESTDIR)$(sysconfdir)/rc.d/init.d/libvirt-guests
uninstall-initscript:
rm -f $(DESTDIR)$(sysconfdir)/rc.d/init.d/libvirt-guests
rmdir $(DESTDIR)$(sysconfdir)/rc.d/init.d ||:
if LIBVIRT_INIT_SCRIPT_RED_HAT
BUILT_SOURCES += libvirt-guests.init
install-init: install-sysconfig install-initscript
uninstall-init: uninstall-sysconfig uninstall-initscript
else ! LIBVIRT_INIT_SCRIPT_RED_HAT
install-init:
uninstall-init:
endif ! LIBVIRT_INIT_SCRIPT_RED_HAT
libvirt-guests.sh: libvirt-guests.sh.in $(top_builddir)/config.status
$(AM_V_GEN)sed \
-e 's|[@]PACKAGE[@]|$(PACKAGE)|g' \
-e 's|[@]bindir[@]|$(bindir)|g' \
-e 's|[@]localedir[@]|$(localedir)|g' \
-e 's|[@]localstatedir[@]|$(localstatedir)|g' \
-e 's|[@]sbindir[@]|$(sbindir)|g' \
-e 's|[@]sysconfdir[@]|$(sysconfdir)|g' \
< $< > $@-t && \
chmod a+x $@-t && \
mv $@-t $@
BUILT_SOURCES += libvirt-guests.sh
libvirt-guests.init: libvirt-guests.init.in libvirt-guests.sh
$(AM_V_GEN)sed \
-e 's|[@]libexecdir[@]|$(libexecdir)|g' \
< $< > $@-t && \
chmod a+x $@-t && \
mv $@-t $@
EXTRA_DIST += libvirt-guests.service.in
build: add $(prefix) to SYSTEMD_UNIT_DIR I noticed this problem when adding systemd support to netcf, because I setup the configure.ac to automatically prefer using systemd over initscripts when possible - although I had copied the install-data-local target from the example of libvirt's "libvirt-guests" service more or less verbatim, "make distcheck" would fail because it was trying to install the service file directly into /lib/systemd/system rather than into /home/user/some/unimportant/name/lib/systemd/system. This is caused by the install/uninstall rules for the systemd unit files relying on $(DESTDIR) pointing the installed files to the right place, but in reality $(DESTDIR) is empty during this part of make distcheck - it instead sets $(prefix) with the toplevel directory used for its test build/install/uninstall cycle. (This problem hasn't been seen when running "make distcheck" in libvirt because libvirt will never build/install systemd support unless explicitly told to do so on the configure commandline, and "make distcheck" doesn't put the "--with-initscript=..." option on the configure commandline.) I verified that the same problem does exist in libvirt by modifying libvirt's configure.ac to set: init_systemd=yes with_init_script=systemd+redhat This forces a build/install of the systemd unit files during distcheck, which yields an error like this: /usr/bin/install -c -m 644 virtlockd.service \ /lib/systemd/system/ libtool: install: warning: relinking `libvirt-qemu.la' /usr/bin/install: cannot remove '/lib/systemd/system/virtlockd.service': Permission denied make[4]: *** [install-systemd] Error 1 After adding $(prefix) to all the definitions of SYSTEMD_UNIT_DIR, make distcheck now completes successfully with the modified configure.ac, and the above lines change to something like this: /usr/bin/install -c -m 644 virtlockd.service \ /home/laine/devel/libvirt/libvirt-1.2.1/_inst/lib/systemd/system/
2014-01-17 12:11:58 +00:00
SYSTEMD_UNIT_DIR = $(prefix)/lib/systemd/system
if LIBVIRT_INIT_SCRIPT_SYSTEMD
install-systemd: libvirt-guests.service install-sysconfig libvirt-guests.sh
$(MKDIR_P) $(DESTDIR)$(SYSTEMD_UNIT_DIR)
$(INSTALL_DATA) libvirt-guests.service \
$(DESTDIR)$(SYSTEMD_UNIT_DIR)/libvirt-guests.service
uninstall-systemd: uninstall-sysconfig
rm -f $(DESTDIR)$(SYSTEMD_UNIT_DIR)/libvirt-guests.service
rmdir $(DESTDIR)$(SYSTEMD_UNIT_DIR) ||:
BUILT_SOURCES += libvirt-guests.service
else ! LIBVIRT_INIT_SCRIPT_SYSTEMD
install-systemd:
uninstall-systemd:
endif ! LIBVIRT_INIT_SCRIPT_SYSTEMD
libvirt-guests.service: libvirt-guests.service.in $(top_builddir)/config.status
$(AM_V_GEN)sed \
-e 's|[@]PACKAGE[@]|$(PACKAGE)|g' \
-e 's|[@]bindir[@]|$(bindir)|g' \
-e 's|[@]localedir[@]|$(localedir)|g' \
-e 's|[@]localstatedir[@]|$(localstatedir)|g' \
-e 's|[@]sbindir[@]|$(sbindir)|g' \
-e 's|[@]sysconfdir[@]|$(sysconfdir)|g' \
-e 's|[@]libexecdir[@]|$(libexecdir)|g' \
< $< > $@-t && \
mv $@-t $@
CLEANFILES = $(bin_SCRIPTS)
CLEANFILES += *.gcov .libs/*.gcda .libs/*.gcno *.gcno *.gcda *.i *.s
MAINTAINERCLEANFILES = $(dist_man1_MANS)
DISTCLEANFILES += $(BUILT_SOURCES)