libvirt/libvirt.spec.in

1973 lines
56 KiB
RPMSpec
Raw Normal View History

# -*- rpm-spec -*-
# If neither fedora nor rhel was defined, try to guess them from %{dist}
%if !0%{?rhel} && !0%{?fedora}
%{expand:%(echo "%{?dist}" | \
sed -ne 's/^\.el\([0-9]\+\).*/%%define rhel \1/p')}
%{expand:%(echo "%{?dist}" | \
sed -ne 's/^\.fc\?\([0-9]\+\).*/%%define fedora \1/p')}
%endif
# Default to skipping autoreconf. Distros can change just this one line
# (or provide a command-line override) if they backport any patches that
# touch configure.ac or Makefile.am.
%{!?enable_autotools:%define enable_autotools 0}
# A client only build will create a libvirt.so only containing
# the generic RPC driver, and test driver and no libvirtd
# Default to a full server + client build
%define client_only 0
# Now turn off server build in certain cases
# RHEL-5 builds are client-only for s390, ppc
%if 0%{?rhel} == 5
%ifnarch %{ix86} x86_64 ia64
%define client_only 1
%endif
%endif
# Disable all server side drivers if client only build requested
%if %{client_only}
%define server_drivers 0
%else
%define server_drivers 1
%endif
# Now set the defaults for all the important features, independent
# of any particular OS
# First the daemon itself
%define with_libvirtd 0%{!?_without_libvirtd:%{server_drivers}}
%define with_avahi 0%{!?_without_avahi:%{server_drivers}}
# Then the hypervisor drivers that run in libvirtd
%define with_xen 0%{!?_without_xen:%{server_drivers}}
%define with_qemu 0%{!?_without_qemu:%{server_drivers}}
%define with_lxc 0%{!?_without_lxc:%{server_drivers}}
%define with_uml 0%{!?_without_uml:%{server_drivers}}
%define with_libxl 0%{!?_without_libxl:%{server_drivers}}
%define with_qemu_tcg %{with_qemu}
# Change if we ever provide qemu-kvm binaries on non-x86 hosts
%ifarch %{ix86} x86_64
%define with_qemu_kvm %{with_qemu}
%else
%define with_qemu_kvm 0
%endif
# Then the hypervisor drivers that run outside libvirtd, in libvirt.so
%define with_openvz 0%{!?_without_openvz:1}
%define with_vbox 0%{!?_without_vbox:1}
%define with_vmware 0%{!?_without_vmware:1}
%define with_phyp 0%{!?_without_phyp:1}
%define with_esx 0%{!?_without_esx:1}
%define with_hyperv 0%{!?_without_hyperv:1}
%define with_xenapi 0%{!?_without_xenapi:1}
# Then the secondary host drivers, which run inside libvirtd
%define with_network 0%{!?_without_network:%{server_drivers}}
%define with_storage_fs 0%{!?_without_storage_fs:%{server_drivers}}
%define with_storage_lvm 0%{!?_without_storage_lvm:%{server_drivers}}
%define with_storage_iscsi 0%{!?_without_storage_iscsi:%{server_drivers}}
%define with_storage_disk 0%{!?_without_storage_disk:%{server_drivers}}
%define with_storage_mpath 0%{!?_without_storage_mpath:%{server_drivers}}
%define with_numactl 0%{!?_without_numactl:%{server_drivers}}
%define with_selinux 0%{!?_without_selinux:%{server_drivers}}
# A few optional bits off by default, we enable later
%define with_polkit 0%{!?_without_polkit:0}
2009-06-29 11:33:13 +00:00
%define with_capng 0%{!?_without_capng:0}
%define with_netcf 0%{!?_without_netcf:0}
%define with_udev 0%{!?_without_udev:0}
%define with_hal 0%{!?_without_hal:0}
%define with_yajl 0%{!?_without_yajl:0}
%define with_nwfilter 0%{!?_without_nwfilter:0}
nwfilter: Support for learning a VM's IP address This patch implements support for learning a VM's IP address. It uses the pcap library to listen on the VM's backend network interface (tap) or the physical ethernet device (macvtap) and tries to capture packets with source or destination MAC address of the VM and learn from DHCP Offers, ARP traffic, or first-sent IPv4 packet what the IP address of the VM's interface is. This then allows to instantiate the network traffic filtering rules without the user having to provide the IP parameter somewhere in the filter description or in the interface description as a parameter. This only supports to detect the parameter IP, which is for the assumed single IPv4 address of a VM. There is not support for interfaces that may have multiple IP addresses (IP aliasing) or IPv6 that may then require more than one valid IP address to be detected. A VM can have multiple independent interfaces that each uses a different IP address and in that case it will be attempted to detect each one of the address independently. So, when for example an interface description in the domain XML has looked like this up to now: <interface type='bridge'> <source bridge='mybridge'/> <model type='virtio'/> <filterref filter='clean-traffic'> <parameter name='IP' value='10.2.3.4'/> </filterref> </interface> you may omit the IP parameter: <interface type='bridge'> <source bridge='mybridge'/> <model type='virtio'/> <filterref filter='clean-traffic'/> </interface> Internally I am walking the 'tree' of a VM's referenced network filters and determine with the given variables which variables are missing. Now, the above IP parameter may be missing and this causes a libvirt-internal thread to be started that uses the pcap library's API to listen to the backend interface (in case of macvtap to the physical interface) in an attempt to determine the missing IP parameter. If the backend interface disappears the thread terminates assuming the VM was brought down. In case of a macvtap device a timeout is being used to wait for packets from the given VM (filtering by VM's interface MAC address). If the VM's macvtap device disappeared the thread also terminates. In all other cases it tries to determine the IP address of the VM and will then apply the rules late on the given interface, which would have happened immediately if the IP parameter had been explicitly given. In case an error happens while the firewall rules are applied, the VM's backend interface is 'down'ed preventing it to communicate. Reasons for failure for applying the network firewall rules may that an ebtables/iptables command failes or OOM errors. Essentially the same failure reasons may occur as when the firewall rules are applied immediately on VM start, except that due to the late application of the filtering rules the VM now is already running and cannot be hindered anymore from starting. Bringing down the whole VM would probably be considered too drastic. While a VM's IP address is attempted to be determined only limited updates to network filters are allowed. In particular it is prevented that filters are modified in such a way that they would introduce new variables. A caveat: The algorithm does not know which one is the appropriate IP address of a VM. If the VM spoofs an IP address in its first ARP traffic or IPv4 packets its filtering rules will be instantiated for this IP address, thus 'locking' it to the found IP address. So, it's still 'safer' to explicitly provide the IP address of a VM's interface in the filter description if it is known beforehand. * configure.ac: detect libpcap * libvirt.spec.in: require libpcap[-devel] if qemu is built * src/internal.h: add the new ATTRIBUTE_PACKED define * src/Makefile.am src/libvirt_private.syms: add the new modules and symbols * src/nwfilter/nwfilter_learnipaddr.[ch]: new module being added * src/nwfilter/nwfilter_driver.c src/conf/nwfilter_conf.[ch] src/nwfilter/nwfilter_ebiptables_driver.[ch] src/nwfilter/nwfilter_gentech_driver.[ch]: plu the new functionality in * tests/nwfilterxml2xmltest: extend testing
2010-04-07 21:02:18 +00:00
%define with_libpcap 0%{!?_without_libpcap:0}
%define with_macvtap 0%{!?_without_macvtap:0}
%define with_libnl 0%{!?_without_libnl:0}
%define with_audit 0%{!?_without_audit:0}
Add dtrace static probes in libvirtd Adds initial support for dtrace static probes in libvirtd daemon, assuming use of systemtap dtrace compat shim on Linux. The probes are inserted for network client connect, disconnect, TLS handshake states and authentication protocol states. This can be tested by running the xample program and then attempting to connect with any libvirt client (virsh, virt-manager, etc). # stap examples/systemtap/client.stp Client fd=44 connected readonly=0 Client fd=44 auth polkit deny pid:24997,uid:500 Client fd=44 disconnected Client fd=46 connected readonly=1 Client fd=46 auth sasl allow test Client fd=46 disconnected The libvirtd.stp file should also really not be required, since it is duplicated info that is already available in the main probes.d definition file. A script to autogenerate the .stp file is needed, either in libvirtd tree, or better as part of systemtap itself. * Makefile.am: Add examples/systemtap subdir * autobuild.sh: Disable dtrace for mingw32 * configure.ac: Add check for dtrace * daemon/.gitignore: Ignore generated dtrace probe file * daemon/Makefile.am: Build dtrace probe header & object files * daemon/libvirtd.stp: SystemTAP convenience probeset * daemon/libvirtd.c: Add connect/disconnect & TLS probes * daemon/remote.c: Add SASL and PolicyKit auth probes * daemon/probes.d: Master probe definition * daemon/libvirtd.h: Add convenience macro for probes so that compilation is a no-op when dtrace is not available * examples/systemtap/Makefile.am, examples/systemtap/client.stp Example systemtap script using dtrace probe markers * libvirt.spec.in: Enable dtrace on F13/RHEL6 * mingw32-libvirt.spec.in: Force disable dtrace
2010-09-14 16:30:32 +00:00
%define with_dtrace 0%{!?_without_dtrace:0}
%define with_cgconfig 0%{!?_without_cgconfig:0}
%define with_sanlock 0%{!?_without_sanlock:0}
%define with_systemd 0%{!?_without_systemd:0}
%define with_numad 0%{!?_without_numad:0}
# Non-server/HV driver defaults which are always enabled
%define with_python 0%{!?_without_python:1}
%define with_sasl 0%{!?_without_sasl:1}
# Finally set the OS / architecture specific special cases
# Xen is available only on i386 x86_64 ia64
%ifnarch %{ix86} x86_64 ia64
%define with_xen 0
%define with_libxl 0
%endif
# Numactl is not available on s390[x] and ARM
%ifarch s390 s390x %{arm}
%define with_numactl 0
%endif
# RHEL doesn't ship OpenVZ, VBox, UML, PowerHypervisor,
# VMWare, libxenserver (xenapi), libxenlight (Xen 4.1 and newer),
# or HyperV.
%if 0%{?rhel}
%define with_openvz 0
%define with_vbox 0
%define with_uml 0
%define with_phyp 0
%define with_vmware 0
%define with_xenapi 0
%define with_libxl 0
%define with_hyperv 0
%endif
# Although earlier Fedora has systemd, libvirt still used sysvinit
%if 0%{?fedora} >= 17
%define with_systemd 1
%endif
# RHEL-5 has restricted QEMU to x86_64 only and is too old for LXC
%if 0%{?rhel} == 5
%define with_qemu_tcg 0
%ifnarch x86_64
%define with_qemu 0
%define with_qemu_kvm 0
%endif
%define with_lxc 0
%endif
# RHEL-6 has restricted QEMU to x86_64 only, stopped including Xen
# on all archs. Other archs all have LXC available though
%if 0%{?rhel} >= 6
%define with_qemu_tcg 0
%ifnarch x86_64
%define with_qemu 0
%define with_qemu_kvm 0
%endif
%define with_xen 0
%endif
# Fedora doesn't have any QEMU on ppc64 until FC16 - only ppc
%if 0%{?fedora} && 0%{?fedora} < 16
%ifarch ppc64
%define with_qemu 0
%endif
%endif
# Fedora doesn't have new enough Xen for libxl until F16
%if 0%{?fedora} && 0%{?fedora} < 16
%define with_libxl 0
%endif
# PolicyKit was introduced in Fedora 8 / RHEL-6 or newer
%if 0%{?fedora} >= 8 || 0%{?rhel} >= 6
%define with_polkit 0%{!?_without_polkit:1}
%endif
# libcapng is used to manage capabilities in Fedora 12 / RHEL-6 or newer
%if 0%{?fedora} >= 12 || 0%{?rhel} >= 6
2009-06-29 11:33:13 +00:00
%define with_capng 0%{!?_without_capng:1}
%endif
# netcf is used to manage network interfaces in Fedora 12 / RHEL-6 or newer
%if 0%{?fedora} >= 12 || 0%{?rhel} >= 6
%define with_netcf 0%{!?_without_netcf:%{server_drivers}}
%endif
# udev is used to manage host devices in Fedora 12 / RHEL-6 or newer
%if 0%{?fedora} >= 12 || 0%{?rhel} >= 6
%define with_udev 0%{!?_without_udev:%{server_drivers}}
%else
%define with_hal 0%{!?_without_hal:%{server_drivers}}
%endif
# Enable yajl library for JSON mode with QEMU
%if 0%{?fedora} >= 13 || 0%{?rhel} >= 6
%define with_yajl 0%{!?_without_yajl:%{server_drivers}}
%endif
# Enable sanlock library for lock management with QEMU
# Sanlock is available only on i686 x86_64 for RHEL
%if 0%{?fedora} >= 16
%define with_sanlock 0%{!?_without_sanlock:%{server_drivers}}
%endif
%if 0%{?rhel} >= 6
%ifarch %{ix86} x86_64
%define with_sanlock 0%{!?_without_sanlock:%{server_drivers}}
%endif
%endif
# Disable some drivers when building without libvirt daemon.
# The logic is the same as in configure.ac
%if ! %{with_libvirtd}
%define with_network 0
%define with_qemu 0
%define with_lxc 0
%define with_uml 0
%define with_hal 0
%define with_udev 0
%define with_storage_fs 0
%define with_storage_lvm 0
%define with_storage_iscsi 0
%define with_storage_mpath 0
%define with_storage_disk 0
%endif
%if %{with_qemu} || %{with_lxc} || %{with_uml}
%define with_nwfilter 0%{!?_without_nwfilter:%{server_drivers}}
# Enable libpcap library
nwfilter: Support for learning a VM's IP address This patch implements support for learning a VM's IP address. It uses the pcap library to listen on the VM's backend network interface (tap) or the physical ethernet device (macvtap) and tries to capture packets with source or destination MAC address of the VM and learn from DHCP Offers, ARP traffic, or first-sent IPv4 packet what the IP address of the VM's interface is. This then allows to instantiate the network traffic filtering rules without the user having to provide the IP parameter somewhere in the filter description or in the interface description as a parameter. This only supports to detect the parameter IP, which is for the assumed single IPv4 address of a VM. There is not support for interfaces that may have multiple IP addresses (IP aliasing) or IPv6 that may then require more than one valid IP address to be detected. A VM can have multiple independent interfaces that each uses a different IP address and in that case it will be attempted to detect each one of the address independently. So, when for example an interface description in the domain XML has looked like this up to now: <interface type='bridge'> <source bridge='mybridge'/> <model type='virtio'/> <filterref filter='clean-traffic'> <parameter name='IP' value='10.2.3.4'/> </filterref> </interface> you may omit the IP parameter: <interface type='bridge'> <source bridge='mybridge'/> <model type='virtio'/> <filterref filter='clean-traffic'/> </interface> Internally I am walking the 'tree' of a VM's referenced network filters and determine with the given variables which variables are missing. Now, the above IP parameter may be missing and this causes a libvirt-internal thread to be started that uses the pcap library's API to listen to the backend interface (in case of macvtap to the physical interface) in an attempt to determine the missing IP parameter. If the backend interface disappears the thread terminates assuming the VM was brought down. In case of a macvtap device a timeout is being used to wait for packets from the given VM (filtering by VM's interface MAC address). If the VM's macvtap device disappeared the thread also terminates. In all other cases it tries to determine the IP address of the VM and will then apply the rules late on the given interface, which would have happened immediately if the IP parameter had been explicitly given. In case an error happens while the firewall rules are applied, the VM's backend interface is 'down'ed preventing it to communicate. Reasons for failure for applying the network firewall rules may that an ebtables/iptables command failes or OOM errors. Essentially the same failure reasons may occur as when the firewall rules are applied immediately on VM start, except that due to the late application of the filtering rules the VM now is already running and cannot be hindered anymore from starting. Bringing down the whole VM would probably be considered too drastic. While a VM's IP address is attempted to be determined only limited updates to network filters are allowed. In particular it is prevented that filters are modified in such a way that they would introduce new variables. A caveat: The algorithm does not know which one is the appropriate IP address of a VM. If the VM spoofs an IP address in its first ARP traffic or IPv4 packets its filtering rules will be instantiated for this IP address, thus 'locking' it to the found IP address. So, it's still 'safer' to explicitly provide the IP address of a VM's interface in the filter description if it is known beforehand. * configure.ac: detect libpcap * libvirt.spec.in: require libpcap[-devel] if qemu is built * src/internal.h: add the new ATTRIBUTE_PACKED define * src/Makefile.am src/libvirt_private.syms: add the new modules and symbols * src/nwfilter/nwfilter_learnipaddr.[ch]: new module being added * src/nwfilter/nwfilter_driver.c src/conf/nwfilter_conf.[ch] src/nwfilter/nwfilter_ebiptables_driver.[ch] src/nwfilter/nwfilter_gentech_driver.[ch]: plu the new functionality in * tests/nwfilterxml2xmltest: extend testing
2010-04-07 21:02:18 +00:00
%define with_libpcap 0%{!?_without_libpcap:%{server_drivers}}
%define with_macvtap 0%{!?_without_macvtap:%{server_drivers}}
# numad is used to manage the CPU placement dynamically,
# it's not available on s390[x] and ARM.
%if 0%{?fedora} >= 17 || 0%{?rhel} >= 6
%ifnarch s390 s390x %{arm}
%define with_numad 0%{!?_without_numad:%{server_drivers}}
%endif
%endif
%endif
%if %{with_macvtap}
%define with_libnl 1
nwfilter: Support for learning a VM's IP address This patch implements support for learning a VM's IP address. It uses the pcap library to listen on the VM's backend network interface (tap) or the physical ethernet device (macvtap) and tries to capture packets with source or destination MAC address of the VM and learn from DHCP Offers, ARP traffic, or first-sent IPv4 packet what the IP address of the VM's interface is. This then allows to instantiate the network traffic filtering rules without the user having to provide the IP parameter somewhere in the filter description or in the interface description as a parameter. This only supports to detect the parameter IP, which is for the assumed single IPv4 address of a VM. There is not support for interfaces that may have multiple IP addresses (IP aliasing) or IPv6 that may then require more than one valid IP address to be detected. A VM can have multiple independent interfaces that each uses a different IP address and in that case it will be attempted to detect each one of the address independently. So, when for example an interface description in the domain XML has looked like this up to now: <interface type='bridge'> <source bridge='mybridge'/> <model type='virtio'/> <filterref filter='clean-traffic'> <parameter name='IP' value='10.2.3.4'/> </filterref> </interface> you may omit the IP parameter: <interface type='bridge'> <source bridge='mybridge'/> <model type='virtio'/> <filterref filter='clean-traffic'/> </interface> Internally I am walking the 'tree' of a VM's referenced network filters and determine with the given variables which variables are missing. Now, the above IP parameter may be missing and this causes a libvirt-internal thread to be started that uses the pcap library's API to listen to the backend interface (in case of macvtap to the physical interface) in an attempt to determine the missing IP parameter. If the backend interface disappears the thread terminates assuming the VM was brought down. In case of a macvtap device a timeout is being used to wait for packets from the given VM (filtering by VM's interface MAC address). If the VM's macvtap device disappeared the thread also terminates. In all other cases it tries to determine the IP address of the VM and will then apply the rules late on the given interface, which would have happened immediately if the IP parameter had been explicitly given. In case an error happens while the firewall rules are applied, the VM's backend interface is 'down'ed preventing it to communicate. Reasons for failure for applying the network firewall rules may that an ebtables/iptables command failes or OOM errors. Essentially the same failure reasons may occur as when the firewall rules are applied immediately on VM start, except that due to the late application of the filtering rules the VM now is already running and cannot be hindered anymore from starting. Bringing down the whole VM would probably be considered too drastic. While a VM's IP address is attempted to be determined only limited updates to network filters are allowed. In particular it is prevented that filters are modified in such a way that they would introduce new variables. A caveat: The algorithm does not know which one is the appropriate IP address of a VM. If the VM spoofs an IP address in its first ARP traffic or IPv4 packets its filtering rules will be instantiated for this IP address, thus 'locking' it to the found IP address. So, it's still 'safer' to explicitly provide the IP address of a VM's interface in the filter description if it is known beforehand. * configure.ac: detect libpcap * libvirt.spec.in: require libpcap[-devel] if qemu is built * src/internal.h: add the new ATTRIBUTE_PACKED define * src/Makefile.am src/libvirt_private.syms: add the new modules and symbols * src/nwfilter/nwfilter_learnipaddr.[ch]: new module being added * src/nwfilter/nwfilter_driver.c src/conf/nwfilter_conf.[ch] src/nwfilter/nwfilter_ebiptables_driver.[ch] src/nwfilter/nwfilter_gentech_driver.[ch]: plu the new functionality in * tests/nwfilterxml2xmltest: extend testing
2010-04-07 21:02:18 +00:00
%endif
%if 0%{?fedora} >= 11 || 0%{?rhel} >= 5
%define with_audit 0%{!?_without_audit:1}
%endif
Add dtrace static probes in libvirtd Adds initial support for dtrace static probes in libvirtd daemon, assuming use of systemtap dtrace compat shim on Linux. The probes are inserted for network client connect, disconnect, TLS handshake states and authentication protocol states. This can be tested by running the xample program and then attempting to connect with any libvirt client (virsh, virt-manager, etc). # stap examples/systemtap/client.stp Client fd=44 connected readonly=0 Client fd=44 auth polkit deny pid:24997,uid:500 Client fd=44 disconnected Client fd=46 connected readonly=1 Client fd=46 auth sasl allow test Client fd=46 disconnected The libvirtd.stp file should also really not be required, since it is duplicated info that is already available in the main probes.d definition file. A script to autogenerate the .stp file is needed, either in libvirtd tree, or better as part of systemtap itself. * Makefile.am: Add examples/systemtap subdir * autobuild.sh: Disable dtrace for mingw32 * configure.ac: Add check for dtrace * daemon/.gitignore: Ignore generated dtrace probe file * daemon/Makefile.am: Build dtrace probe header & object files * daemon/libvirtd.stp: SystemTAP convenience probeset * daemon/libvirtd.c: Add connect/disconnect & TLS probes * daemon/remote.c: Add SASL and PolicyKit auth probes * daemon/probes.d: Master probe definition * daemon/libvirtd.h: Add convenience macro for probes so that compilation is a no-op when dtrace is not available * examples/systemtap/Makefile.am, examples/systemtap/client.stp Example systemtap script using dtrace probe markers * libvirt.spec.in: Enable dtrace on F13/RHEL6 * mingw32-libvirt.spec.in: Force disable dtrace
2010-09-14 16:30:32 +00:00
%if 0%{?fedora} >= 13 || 0%{?rhel} >= 6
%define with_dtrace 1
%endif
# Pull in cgroups config system
%if 0%{?fedora} >= 12 || 0%{?rhel} >= 6
%if %{with_qemu} || %{with_lxc}
%define with_cgconfig 0%{!?_without_cgconfig:1}
%endif
%endif
# Force QEMU to run as non-root
%if 0%{?fedora} >= 12 || 0%{?rhel} >= 6
%define qemu_user qemu
%define qemu_group qemu
%else
%define qemu_user root
%define qemu_group root
%endif
# The RHEL-5 Xen package has some feature backports. This
# flag is set to enable use of those special bits on RHEL-5
%if 0%{?rhel} == 5
%define with_rhel5 1
%else
%define with_rhel5 0
%endif
2010-11-11 17:21:28 +00:00
Summary: Library providing a simple virtualization API
Name: libvirt
Version: @VERSION@
Release: 1%{?dist}%{?extra_release}
License: LGPLv2+
Group: Development/Libraries
Source: http://libvirt.org/sources/libvirt-%{version}.tar.gz
BuildRoot: %{_tmppath}/%{name}-%{version}-%{release}-root
URL: http://libvirt.org/
%if %{with_libvirtd}
Requires: libvirt-daemon = %{version}-%{release}
%if %{with_network}
Requires: libvirt-daemon-config-network = %{version}-%{release}
%endif
%if %{with_nwfilter}
Requires: libvirt-daemon-config-nwfilter = %{version}-%{release}
%endif
# XXX when we turn on driver modules, we need to add
# deps on each driver (Requires: libvirt-daemon-drv-qemu)
%endif
Requires: libvirt-client = %{version}-%{release}
# All build-time requirements. Run-time requirements are
# listed against each sub-RPM
%if 0%{?enable_autotools}
BuildRequires: autoconf
BuildRequires: automake
BuildRequires: gettext-devel
BuildRequires: libtool
%endif
BuildRequires: python-devel
%if %{with_systemd}
BuildRequires: systemd-units
%endif
%if %{with_xen}
BuildRequires: xen-devel
%endif
BuildRequires: libxml2-devel
BuildRequires: xhtml1-dtds
BuildRequires: libxslt
BuildRequires: readline-devel
BuildRequires: ncurses-devel
BuildRequires: gettext
BuildRequires: libtasn1-devel
BuildRequires: gnutls-devel
%if 0%{?fedora} >= 12 || 0%{?rhel} >= 6
# for augparse, optionally used in testing
BuildRequires: augeas
%endif
%if %{with_hal}
BuildRequires: hal-devel
%endif
%if %{with_udev}
BuildRequires: libudev-devel >= 145
BuildRequires: libpciaccess-devel >= 0.10.9
%endif
%if %{with_yajl}
BuildRequires: yajl-devel
%endif
%if %{with_sanlock}
BuildRequires: sanlock-devel >= 1.8
%endif
nwfilter: Support for learning a VM's IP address This patch implements support for learning a VM's IP address. It uses the pcap library to listen on the VM's backend network interface (tap) or the physical ethernet device (macvtap) and tries to capture packets with source or destination MAC address of the VM and learn from DHCP Offers, ARP traffic, or first-sent IPv4 packet what the IP address of the VM's interface is. This then allows to instantiate the network traffic filtering rules without the user having to provide the IP parameter somewhere in the filter description or in the interface description as a parameter. This only supports to detect the parameter IP, which is for the assumed single IPv4 address of a VM. There is not support for interfaces that may have multiple IP addresses (IP aliasing) or IPv6 that may then require more than one valid IP address to be detected. A VM can have multiple independent interfaces that each uses a different IP address and in that case it will be attempted to detect each one of the address independently. So, when for example an interface description in the domain XML has looked like this up to now: <interface type='bridge'> <source bridge='mybridge'/> <model type='virtio'/> <filterref filter='clean-traffic'> <parameter name='IP' value='10.2.3.4'/> </filterref> </interface> you may omit the IP parameter: <interface type='bridge'> <source bridge='mybridge'/> <model type='virtio'/> <filterref filter='clean-traffic'/> </interface> Internally I am walking the 'tree' of a VM's referenced network filters and determine with the given variables which variables are missing. Now, the above IP parameter may be missing and this causes a libvirt-internal thread to be started that uses the pcap library's API to listen to the backend interface (in case of macvtap to the physical interface) in an attempt to determine the missing IP parameter. If the backend interface disappears the thread terminates assuming the VM was brought down. In case of a macvtap device a timeout is being used to wait for packets from the given VM (filtering by VM's interface MAC address). If the VM's macvtap device disappeared the thread also terminates. In all other cases it tries to determine the IP address of the VM and will then apply the rules late on the given interface, which would have happened immediately if the IP parameter had been explicitly given. In case an error happens while the firewall rules are applied, the VM's backend interface is 'down'ed preventing it to communicate. Reasons for failure for applying the network firewall rules may that an ebtables/iptables command failes or OOM errors. Essentially the same failure reasons may occur as when the firewall rules are applied immediately on VM start, except that due to the late application of the filtering rules the VM now is already running and cannot be hindered anymore from starting. Bringing down the whole VM would probably be considered too drastic. While a VM's IP address is attempted to be determined only limited updates to network filters are allowed. In particular it is prevented that filters are modified in such a way that they would introduce new variables. A caveat: The algorithm does not know which one is the appropriate IP address of a VM. If the VM spoofs an IP address in its first ARP traffic or IPv4 packets its filtering rules will be instantiated for this IP address, thus 'locking' it to the found IP address. So, it's still 'safer' to explicitly provide the IP address of a VM's interface in the filter description if it is known beforehand. * configure.ac: detect libpcap * libvirt.spec.in: require libpcap[-devel] if qemu is built * src/internal.h: add the new ATTRIBUTE_PACKED define * src/Makefile.am src/libvirt_private.syms: add the new modules and symbols * src/nwfilter/nwfilter_learnipaddr.[ch]: new module being added * src/nwfilter/nwfilter_driver.c src/conf/nwfilter_conf.[ch] src/nwfilter/nwfilter_ebiptables_driver.[ch] src/nwfilter/nwfilter_gentech_driver.[ch]: plu the new functionality in * tests/nwfilterxml2xmltest: extend testing
2010-04-07 21:02:18 +00:00
%if %{with_libpcap}
BuildRequires: libpcap-devel
%endif
%if %{with_libnl}
BuildRequires: libnl-devel
%endif
%if %{with_avahi}
BuildRequires: avahi-devel
%endif
%if %{with_selinux}
2008-02-20 15:38:29 +00:00
BuildRequires: libselinux-devel
%endif
%if %{with_network}
BuildRequires: dnsmasq >= 2.41
BuildRequires: iptables
BuildRequires: iptables-ipv6
BuildRequires: radvd
%endif
%if %{with_nwfilter}
BuildRequires: ebtables
%endif
BuildRequires: module-init-tools
%if %{with_sasl}
BuildRequires: cyrus-sasl-devel
%endif
2007-12-05 18:21:27 +00:00
%if %{with_polkit}
%if 0%{?fedora} >= 12 || 0%{?rhel} >= 6
# Only need the binary, not -devel
BuildRequires: polkit >= 0.93
%else
2007-12-05 18:21:27 +00:00
BuildRequires: PolicyKit-devel >= 0.6
%endif
%endif
%if %{with_storage_fs}
# For mount/umount in FS driver
BuildRequires: util-linux
%endif
%if %{with_qemu}
# From QEMU RPMs
BuildRequires: /usr/bin/qemu-img
%else
%if %{with_xen}
# From Xen RPMs
BuildRequires: /usr/sbin/qcow-create
%endif
%endif
%if %{with_storage_lvm}
# For LVM drivers
BuildRequires: lvm2
%endif
%if %{with_storage_iscsi}
2008-02-20 15:49:25 +00:00
# For ISCSI driver
BuildRequires: iscsi-initiator-utils
%endif
%if %{with_storage_disk}
# For disk driver
BuildRequires: parted-devel
%if 0%{?rhel} == 5
# Broken RHEL-5 parted RPM is missing a dep
BuildRequires: e2fsprogs-devel
%endif
%endif
%if %{with_storage_mpath}
# For Multipath support
%if 0%{?rhel} == 5
# Broken RHEL-5 packaging has header files in main RPM :-(
BuildRequires: device-mapper
%else
BuildRequires: device-mapper-devel
%endif
%endif
%if %{with_numactl}
# For QEMU/LXC numa info
BuildRequires: numactl-devel
%endif
2009-06-29 11:33:13 +00:00
%if %{with_capng}
BuildRequires: libcap-ng-devel >= 0.5.0
2009-06-29 11:33:13 +00:00
%endif
%if %{with_phyp}
BuildRequires: libssh2-devel
%endif
%if %{with_netcf}
%if 0%{?fedora} >= 16 || 0%{?rhel} >= 6
BuildRequires: netcf-devel >= 0.1.8
%else
BuildRequires: netcf-devel >= 0.1.4
%endif
%endif
%if %{with_esx}
%if 0%{?fedora} >= 9 || 0%{?rhel} >= 6
BuildRequires: libcurl-devel
%else
BuildRequires: curl-devel
%endif
%endif
%if %{with_hyperv}
BuildRequires: libwsman-devel >= 2.2.3
%endif
%if %{with_audit}
BuildRequires: audit-libs-devel
%endif
%if %{with_dtrace}
# we need /usr/sbin/dtrace
BuildRequires: systemtap-sdt-devel
%endif
%if %{with_storage_fs}
# For mount/umount in FS driver
BuildRequires: util-linux
# For showmount in FS driver (netfs discovery)
BuildRequires: nfs-utils
%endif
# Fedora build root suckage
BuildRequires: gawk
# For storage wiping with different algorithms
BuildRequires: scrub
%if %{with_numad}
BuildRequires: numad
%endif
%description
Libvirt is a C toolkit to interact with the virtualization capabilities
of recent versions of Linux (and other OSes). The main package includes
the libvirtd server exporting the virtualization support.
%package docs
Summary: API reference and website documentation
Group: Development/Libraries
%description docs
Includes the API reference for the libvirt C library, and a complete
copy of the libvirt.org website documentation.
%if %{with_libvirtd}
%package daemon
Summary: Server side daemon and supporting files for libvirt library
Group: Development/Libraries
# All runtime requirements for the libvirt package (runtime requrements
# for subpackages are listed later in those subpackages)
# The client side, i.e. shared libs and virsh are in a subpackage
Requires: %{name}-client = %{version}-%{release}
# for modprobe of pci devices
Requires: module-init-tools
# for /sbin/ip & /sbin/tc
Requires: iproute
%if %{with_avahi}
Requires: avahi-libs
%endif
%if %{with_network}
Requires: dnsmasq >= 2.41
Requires: radvd
%endif
%if %{with_network} || %{with_nwfilter}
Requires: iptables
Requires: iptables-ipv6
%endif
%if %{with_nwfilter}
Requires: ebtables
%endif
# needed for device enumeration
%if %{with_hal}
Requires: hal
%endif
%if %{with_udev}
Requires: udev >= 145
%endif
%if %{with_polkit}
%if 0%{?fedora} >= 12 || 0%{?rhel} >=6
Requires: polkit >= 0.93
%else
Requires: PolicyKit >= 0.6
%endif
%endif
%if %{with_storage_fs}
Requires: nfs-utils
# For mkfs
Requires: util-linux-ng
# For pool-build probing for existing pools
BuildRequires: libblkid-devel >= 2.17
# For glusterfs
%if 0%{?fedora} >= 11
Requires: glusterfs-client >= 2.0.1
%endif
%endif
%if %{with_qemu}
# From QEMU RPMs
Requires: /usr/bin/qemu-img
# For image compression
Requires: gzip
Requires: bzip2
Requires: lzop
Requires: xz
%else
%if %{with_xen}
# From Xen RPMs
Requires: /usr/sbin/qcow-create
%endif
%endif
%if %{with_storage_lvm}
# For LVM drivers
Requires: lvm2
%endif
%if %{with_storage_iscsi}
# For ISCSI driver
Requires: iscsi-initiator-utils
%endif
%if %{with_storage_disk}
# For disk driver
Requires: parted
Requires: device-mapper
%endif
%if %{with_storage_mpath}
# For multipath support
Requires: device-mapper
%endif
%if %{with_cgconfig}
Requires: libcgroup
%endif
%ifarch %{ix86} x86_64 ia64
# For virConnectGetSysinfo
Requires: dmidecode
%endif
# For service management
%if %{with_systemd}
Requires(post): systemd-units
Requires(post): systemd-sysv
Requires(preun): systemd-units
Requires(postun): systemd-units
%endif
%if %{with_numad}
Requires: numad
%endif
%description daemon
Server side daemon required to manage the virtualization capabilities
of recent versions of Linux. Requires a hypervisor specific sub-RPM
for specific drivers.
%if %{with_network}
%package daemon-config-network
Summary: Default configuration files for the libvirtd daemon
Group: Development/Libraries
Requires: libvirt-daemon = %{version}-%{release}
%description daemon-config-network
Default configuration files for setting up NAT based networking
%endif
%if %{with_nwfilter}
%package daemon-config-nwfilter
Summary: Network filter configuration files for the libvirtd daemon
Group: Development/Libraries
Requires: libvirt-daemon = %{version}-%{release}
%description daemon-config-nwfilter
Network filter configuration files for cleaning guest traffic
%endif
# XXX when we turn on driver modules, we will need to
# create daemon-drv-XXX sub-RPMs and add them as deps
# to all of the following daemon-XXX RPMs
%if %{with_qemu_tcg}
%package daemon-qemu
Summary: Server side daemon & driver required to run QEMU guests
Group: Development/Libraries
Requires: libvirt-daemon = %{version}-%{release}
Requires: qemu
%description daemon-qemu
Server side daemon and driver required to manage the virtualization
capabilities of the QEMU TCG emulators
%endif
%if %{with_qemu_kvm}
%package daemon-kvm
Summary: Server side daemon & driver required to run KVM guests
Group: Development/Libraries
Requires: libvirt-daemon = %{version}-%{release}
Requires: qemu-kvm
%description daemon-kvm
Server side daemon and driver required to manage the virtualization
capabilities of the KVM hypervisor
%endif
%if %{with_lxc}
%package daemon-lxc
Summary: Server side daemon & driver required to run LXC guests
Group: Development/Libraries
Requires: libvirt-daemon = %{version}-%{release}
%description daemon-lxc
Server side daemon and driver required to manage the virtualization
capabilities of LXC
%endif
%if %{with_uml}
%package daemon-uml
Summary: Server side daemon & driver required to run UML guests
Group: Development/Libraries
Requires: libvirt-daemon = %{version}-%{release}
# There are no UML kernel RPMs in Fedora/RHEL to depend on.
%description daemon-uml
Server side daemon and driver required to manage the virtualization
capabilities of UML
%endif
%if %{with_xen} || %{with_libxl}
%package daemon-xen
Summary: Server side daemon & driver required to run XEN guests
Group: Development/Libraries
Requires: libvirt-daemon = %{version}-%{release}
Requires: xen
%description daemon-xen
Server side daemon and driver required to manage the virtualization
capabilities of XEN
%endif
%endif
%package client
Summary: Client side library and utilities of the libvirt library
Group: Development/Libraries
Requires: readline
Requires: ncurses
# So remote clients can access libvirt over SSH tunnel
# (client invokes 'nc' against the UNIX socket on the server)
Requires: nc
# Needed by libvirt-guests init script.
Requires: gettext
# Needed by virt-pki-validate script.
Requires: gnutls-utils
# Needed for probing the power management features of the host.
Requires: pm-utils
%if %{with_sasl}
Requires: cyrus-sasl
# Not technically required, but makes 'out-of-box' config
# work correctly & doesn't have onerous dependencies
Requires: cyrus-sasl-md5
%endif
%description client
Shared libraries and client binaries needed to access to the
virtualization capabilities of recent versions of Linux (and other OSes).
%package devel
Summary: Libraries, includes, etc. to compile with the libvirt library
Group: Development/Libraries
Requires: %{name}-client = %{version}-%{release}
Requires: %{name}-docs = %{version}-%{release}
Requires: pkgconfig
%description devel
Include header files & development libraries for the libvirt C library.
%if %{with_sanlock}
%package lock-sanlock
Summary: Sanlock lock manager plugin for QEMU driver
Group: Development/Libraries
Requires: sanlock >= 1.8
#for virt-sanlock-cleanup require augeas
Requires: augeas
Requires: %{name} = %{version}-%{release}
%description lock-sanlock
Includes the Sanlock lock manager plugin for the QEMU
driver
%endif
%if %{with_python}
%package python
Summary: Python bindings for the libvirt library
Group: Development/Libraries
Requires: %{name}-client = %{version}-%{release}
%description python
The libvirt-python package contains a module that permits applications
written in the Python programming language to use the interface
supplied by the libvirt library to use the virtualization capabilities
of recent versions of Linux (and other OSes).
%endif
%prep
%setup -q
%build
%if ! %{with_xen}
%define _without_xen --without-xen
%endif
%if ! %{with_qemu}
%define _without_qemu --without-qemu
%endif
2008-08-21 09:28:54 +00:00
%if ! %{with_openvz}
%define _without_openvz --without-openvz
%endif
%if ! %{with_lxc}
%define _without_lxc --without-lxc
%endif
%if ! %{with_vbox}
%define _without_vbox --without-vbox
%endif
%if ! %{with_xenapi}
%define _without_xenapi --without-xenapi
%endif
%if ! %{with_libxl}
%define _without_libxl --without-libxl
%endif
%if ! %{with_sasl}
%define _without_sasl --without-sasl
%endif
%if ! %{with_avahi}
%define _without_avahi --without-avahi
%endif
%if ! %{with_phyp}
%define _without_phyp --without-phyp
%endif
%if ! %{with_esx}
%define _without_esx --without-esx
%endif
%if ! %{with_hyperv}
%define _without_hyperv --without-hyperv
%endif
%if ! %{with_vmware}
%define _without_vmware --without-vmware
%endif
%if ! %{with_polkit}
%define _without_polkit --without-polkit
%endif
%if ! %{with_python}
%define _without_python --without-python
%endif
%if ! %{with_libvirtd}
%define _without_libvirtd --without-libvirtd
%endif
2008-11-21 10:09:08 +00:00
%if ! %{with_uml}
%define _without_uml --without-uml
%endif
%if %{with_rhel5}
%define _with_rhel5_api --with-rhel5-api
%endif
%if ! %{with_network}
%define _without_network --without-network
%endif
%if ! %{with_storage_fs}
%define _without_storage_fs --without-storage-fs
%endif
%if ! %{with_storage_lvm}
%define _without_storage_lvm --without-storage-lvm
%endif
%if ! %{with_storage_iscsi}
%define _without_storage_iscsi --without-storage-iscsi
%endif
%if ! %{with_storage_disk}
%define _without_storage_disk --without-storage-disk
%endif
%if ! %{with_storage_mpath}
%define _without_storage_mpath --without-storage-mpath
%endif
%if ! %{with_numactl}
%define _without_numactl --without-numactl
%endif
%if ! %{with_numad}
%define _without_numad --without-numad
%endif
%if ! %{with_capng}
%define _without_capng --without-capng
%endif
%if ! %{with_netcf}
%define _without_netcf --without-netcf
%endif
%if ! %{with_selinux}
%define _without_selinux --without-selinux
%endif
%if ! %{with_hal}
%define _without_hal --without-hal
%endif
%if ! %{with_udev}
%define _without_udev --without-udev
%endif
%if ! %{with_yajl}
%define _without_yajl --without-yajl
%endif
%if ! %{with_sanlock}
%define _without_sanlock --without-sanlock
%endif
%if ! %{with_libpcap}
%define _without_libpcap --without-libpcap
%endif
%if ! %{with_macvtap}
%define _without_macvtap --without-macvtap
%endif
%if ! %{with_audit}
%define _without_audit --without-audit
%endif
Add dtrace static probes in libvirtd Adds initial support for dtrace static probes in libvirtd daemon, assuming use of systemtap dtrace compat shim on Linux. The probes are inserted for network client connect, disconnect, TLS handshake states and authentication protocol states. This can be tested by running the xample program and then attempting to connect with any libvirt client (virsh, virt-manager, etc). # stap examples/systemtap/client.stp Client fd=44 connected readonly=0 Client fd=44 auth polkit deny pid:24997,uid:500 Client fd=44 disconnected Client fd=46 connected readonly=1 Client fd=46 auth sasl allow test Client fd=46 disconnected The libvirtd.stp file should also really not be required, since it is duplicated info that is already available in the main probes.d definition file. A script to autogenerate the .stp file is needed, either in libvirtd tree, or better as part of systemtap itself. * Makefile.am: Add examples/systemtap subdir * autobuild.sh: Disable dtrace for mingw32 * configure.ac: Add check for dtrace * daemon/.gitignore: Ignore generated dtrace probe file * daemon/Makefile.am: Build dtrace probe header & object files * daemon/libvirtd.stp: SystemTAP convenience probeset * daemon/libvirtd.c: Add connect/disconnect & TLS probes * daemon/remote.c: Add SASL and PolicyKit auth probes * daemon/probes.d: Master probe definition * daemon/libvirtd.h: Add convenience macro for probes so that compilation is a no-op when dtrace is not available * examples/systemtap/Makefile.am, examples/systemtap/client.stp Example systemtap script using dtrace probe markers * libvirt.spec.in: Enable dtrace on F13/RHEL6 * mingw32-libvirt.spec.in: Force disable dtrace
2010-09-14 16:30:32 +00:00
%if ! %{with_dtrace}
%define _without_dtrace --without-dtrace
%endif
%define when %(date +"%%F-%%T")
%define where %(hostname)
%define who %{?packager}%{!?packager:Unknown}
%define with_packager --with-packager="%{who}, %{when}, %{where}"
%define with_packager_version --with-packager-version="%{release}"
%if %{with_systemd}
# We use 'systemd+redhat', so if someone installs upstart or
# legacy init scripts, they can still start libvirtd, etc
%define init_scripts --with-init_script=systemd+redhat
%else
%define init_scripts --with-init_script=redhat
%endif
%if 0%{?enable_autotools}
autoreconf -if
%endif
%configure %{?_without_xen} \
%{?_without_qemu} \
2008-08-21 09:28:54 +00:00
%{?_without_openvz} \
%{?_without_lxc} \
%{?_without_vbox} \
%{?_without_libxl} \
%{?_without_xenapi} \
%{?_without_sasl} \
%{?_without_avahi} \
%{?_without_polkit} \
%{?_without_python} \
%{?_without_libvirtd} \
2008-11-21 10:09:08 +00:00
%{?_without_uml} \
%{?_without_phyp} \
%{?_without_esx} \
%{?_without_hyperv} \
%{?_without_vmware} \
%{?_without_network} \
%{?_with_rhel5_api} \
%{?_without_storage_fs} \
%{?_without_storage_lvm} \
%{?_without_storage_iscsi} \
%{?_without_storage_disk} \
%{?_without_storage_mpath} \
%{?_without_numactl} \
%{?_without_numad} \
%{?_without_capng} \
%{?_without_netcf} \
%{?_without_selinux} \
%{?_without_hal} \
%{?_without_udev} \
%{?_without_yajl} \
%{?_without_sanlock} \
%{?_without_libpcap} \
%{?_without_macvtap} \
%{?_without_audit} \
Add dtrace static probes in libvirtd Adds initial support for dtrace static probes in libvirtd daemon, assuming use of systemtap dtrace compat shim on Linux. The probes are inserted for network client connect, disconnect, TLS handshake states and authentication protocol states. This can be tested by running the xample program and then attempting to connect with any libvirt client (virsh, virt-manager, etc). # stap examples/systemtap/client.stp Client fd=44 connected readonly=0 Client fd=44 auth polkit deny pid:24997,uid:500 Client fd=44 disconnected Client fd=46 connected readonly=1 Client fd=46 auth sasl allow test Client fd=46 disconnected The libvirtd.stp file should also really not be required, since it is duplicated info that is already available in the main probes.d definition file. A script to autogenerate the .stp file is needed, either in libvirtd tree, or better as part of systemtap itself. * Makefile.am: Add examples/systemtap subdir * autobuild.sh: Disable dtrace for mingw32 * configure.ac: Add check for dtrace * daemon/.gitignore: Ignore generated dtrace probe file * daemon/Makefile.am: Build dtrace probe header & object files * daemon/libvirtd.stp: SystemTAP convenience probeset * daemon/libvirtd.c: Add connect/disconnect & TLS probes * daemon/remote.c: Add SASL and PolicyKit auth probes * daemon/probes.d: Master probe definition * daemon/libvirtd.h: Add convenience macro for probes so that compilation is a no-op when dtrace is not available * examples/systemtap/Makefile.am, examples/systemtap/client.stp Example systemtap script using dtrace probe markers * libvirt.spec.in: Enable dtrace on F13/RHEL6 * mingw32-libvirt.spec.in: Force disable dtrace
2010-09-14 16:30:32 +00:00
%{?_without_dtrace} \
%{with_packager} \
%{with_packager_version} \
--with-qemu-user=%{qemu_user} \
--with-qemu-group=%{qemu_group} \
%{init_scripts}
make %{?_smp_mflags}
gzip -9 ChangeLog
%install
rm -fr %{buildroot}
%makeinstall SYSTEMD_UNIT_DIR=%{buildroot}%{_unitdir}
Add dtrace static probes in libvirtd Adds initial support for dtrace static probes in libvirtd daemon, assuming use of systemtap dtrace compat shim on Linux. The probes are inserted for network client connect, disconnect, TLS handshake states and authentication protocol states. This can be tested by running the xample program and then attempting to connect with any libvirt client (virsh, virt-manager, etc). # stap examples/systemtap/client.stp Client fd=44 connected readonly=0 Client fd=44 auth polkit deny pid:24997,uid:500 Client fd=44 disconnected Client fd=46 connected readonly=1 Client fd=46 auth sasl allow test Client fd=46 disconnected The libvirtd.stp file should also really not be required, since it is duplicated info that is already available in the main probes.d definition file. A script to autogenerate the .stp file is needed, either in libvirtd tree, or better as part of systemtap itself. * Makefile.am: Add examples/systemtap subdir * autobuild.sh: Disable dtrace for mingw32 * configure.ac: Add check for dtrace * daemon/.gitignore: Ignore generated dtrace probe file * daemon/Makefile.am: Build dtrace probe header & object files * daemon/libvirtd.stp: SystemTAP convenience probeset * daemon/libvirtd.c: Add connect/disconnect & TLS probes * daemon/remote.c: Add SASL and PolicyKit auth probes * daemon/probes.d: Master probe definition * daemon/libvirtd.h: Add convenience macro for probes so that compilation is a no-op when dtrace is not available * examples/systemtap/Makefile.am, examples/systemtap/client.stp Example systemtap script using dtrace probe markers * libvirt.spec.in: Enable dtrace on F13/RHEL6 * mingw32-libvirt.spec.in: Force disable dtrace
2010-09-14 16:30:32 +00:00
for i in domain-events/events-c dominfo domsuspend hellolibvirt openauth python xml/nwfilter systemtap
do
(cd examples/$i ; make clean ; rm -rf .deps .libs Makefile Makefile.in)
done
rm -f $RPM_BUILD_ROOT%{_libdir}/*.la
rm -f $RPM_BUILD_ROOT%{_libdir}/*.a
rm -f $RPM_BUILD_ROOT%{_libdir}/python*/site-packages/*.la
rm -f $RPM_BUILD_ROOT%{_libdir}/python*/site-packages/*.a
rm -f $RPM_BUILD_ROOT%{_libdir}/libvirt/lock-driver/*.la
rm -f $RPM_BUILD_ROOT%{_libdir}/libvirt/lock-driver/*.a
%if %{with_network}
install -d -m 0755 $RPM_BUILD_ROOT%{_datadir}/lib/libvirt/dnsmasq/
# We don't want to install /etc/libvirt/qemu/networks in the main %files list
# because if the admin wants to delete the default network completely, we don't
# want to end up re-incarnating it on every RPM upgrade.
install -d -m 0755 $RPM_BUILD_ROOT%{_datadir}/libvirt/networks/
cp $RPM_BUILD_ROOT%{_sysconfdir}/libvirt/qemu/networks/default.xml \
$RPM_BUILD_ROOT%{_datadir}/libvirt/networks/default.xml
rm -f $RPM_BUILD_ROOT%{_sysconfdir}/libvirt/qemu/networks/default.xml
rm -f $RPM_BUILD_ROOT%{_sysconfdir}/libvirt/qemu/networks/autostart/default.xml
2007-03-12 16:32:43 +00:00
# Strip auto-generated UUID - we need it generated per-install
sed -i -e "/<uuid>/d" $RPM_BUILD_ROOT%{_datadir}/libvirt/networks/default.xml
%else
rm -f $RPM_BUILD_ROOT%{_sysconfdir}/libvirt/qemu/networks/default.xml
rm -f $RPM_BUILD_ROOT%{_sysconfdir}/libvirt/qemu/networks/autostart/default.xml
%endif
%if ! %{with_qemu}
rm -f $RPM_BUILD_ROOT%{_datadir}/augeas/lenses/libvirtd_qemu.aug
rm -f $RPM_BUILD_ROOT%{_datadir}/augeas/lenses/tests/test_libvirtd_qemu.aug
%endif
%find_lang %{name}
%if ! %{with_lxc}
rm -f $RPM_BUILD_ROOT%{_datadir}/augeas/lenses/libvirtd_lxc.aug
rm -f $RPM_BUILD_ROOT%{_datadir}/augeas/lenses/tests/test_libvirtd_lxc.aug
%endif
%if ! %{with_python}
rm -rf $RPM_BUILD_ROOT%{_datadir}/doc/libvirt-python-%{version}
%endif
%if ! %{with_qemu}
rm -rf $RPM_BUILD_ROOT%{_sysconfdir}/libvirt/qemu.conf
rm -rf $RPM_BUILD_ROOT%{_sysconfdir}/logrotate.d/libvirtd.qemu
%endif
%if ! %{with_lxc}
rm -rf $RPM_BUILD_ROOT%{_sysconfdir}/libvirt/lxc.conf
rm -rf $RPM_BUILD_ROOT%{_sysconfdir}/logrotate.d/libvirtd.lxc
%endif
%if ! %{with_uml}
rm -rf $RPM_BUILD_ROOT%{_sysconfdir}/logrotate.d/libvirtd.uml
%endif
mv $RPM_BUILD_ROOT%{_datadir}/doc/libvirt-%{version} \
$RPM_BUILD_ROOT%{_datadir}/doc/libvirt-docs-%{version}
%clean
rm -fr %{buildroot}
%check
cd tests
# These 3 tests don't current work in a mock build root
for i in nodeinfotest daemon-conf seclabeltest
do
rm -f $i
printf "#!/bin/sh\nexit 0\n" > $i
chmod +x $i
done
make check
%if %{with_libvirtd}
%pre daemon
%if 0%{?fedora} >= 12 || 0%{?rhel} >= 6
# Normally 'setup' adds this in /etc/passwd, but this is
# here for case of upgrades from earlier Fedora/RHEL. This
# UID/GID pair is reserved for qemu:qemu
getent group kvm >/dev/null || groupadd -g 36 -r kvm
getent group qemu >/dev/null || groupadd -g 107 -r qemu
getent passwd qemu >/dev/null || \
useradd -r -u 107 -g qemu -G kvm -d / -s /sbin/nologin \
-c "qemu user" qemu
%endif
%post daemon
%if %{with_network}
Give each virtual network bridge its own fixed MAC address This fixes https://bugzilla.redhat.com/show_bug.cgi?id=609463 The problem was that, since a bridge always acquires the MAC address of the connected interface with the numerically lowest MAC, as guests are started and stopped, it was possible for the MAC address to change over time, and this change in the network was being detected by Windows 7 (it sees the MAC of the default route change), so on each reboot it would bring up a dialog box asking about this "new network". The solution is to create a dummy tap interface with a MAC guaranteed to be lower than any guest interface's MAC, and attach that tap to the bridge as soon as it's created. Since all guest MAC addresses start with 0xFE, we can just generate a MAC with the standard "0x52, 0x54, 0" prefix, and it's guaranteed to always win (physical interfaces are never connected to these bridges, so we don't need to worry about competing numerically with them). Note that the dummy tap is never set to IFF_UP state - that's not necessary in order for the bridge to take its MAC, and not setting it to UP eliminates the clutter of having an (eg) "virbr0-nic" displayed in the output of the ifconfig command. I chose to not auto-generate the MAC address in the network XML parser, as there are likely to be consumers of that API that don't need or want to have a MAC address associated with the bridge. Instead, in bridge_driver.c when the network is being defined, if there is no MAC, one is generated. To account for virtual network configs that already exist when upgrading from an older version of libvirt, I've added a %post script to the specfile that searches for all network definitions in both the config directory (/etc/libvirt/qemu/networks) and the state directory (/var/lib/libvirt/network) that are missing a mac address, generates a random address, and adds it to the config (and a matching address to the state file, if there is one). docs/formatnetwork.html.in: document <mac address.../> docs/schemas/network.rng: add nac address to schema libvirt.spec.in: %post script to update existing networks src/conf/network_conf.[ch]: parse and format <mac address.../> src/libvirt_private.syms: export a couple private symbols we need src/network/bridge_driver.c: auto-generate mac address when needed, create dummy interface if mac address is present. tests/networkxml2xmlin/isolated-network.xml tests/networkxml2xmlin/routed-network.xml tests/networkxml2xmlout/isolated-network.xml tests/networkxml2xmlout/routed-network.xml: add mac address to some tests
2011-02-09 08:28:12 +00:00
# All newly defined networks will have a mac address for the bridge
# auto-generated, but networks already existing at the time of upgrade
# will not. We need to go through all the network configs, look for
# those that don't have a mac address, and add one.
network_files=$( (cd %{_localstatedir}/lib/libvirt/network && \
grep -L "mac address" *.xml; \
cd %{_sysconfdir}/libvirt/qemu/networks && \
grep -L "mac address" *.xml) 2>/dev/null \
| sort -u)
for file in $network_files
do
# each file exists in either the config or state directory (or both) and
# does not have a mac address specified in either. We add the same mac
# address to both files (or just one, if the other isn't there)
mac4=`printf '%X' $(($RANDOM % 256))`
mac5=`printf '%X' $(($RANDOM % 256))`
mac6=`printf '%X' $(($RANDOM % 256))`
for dir in %{_localstatedir}/lib/libvirt/network \
%{_sysconfdir}/libvirt/qemu/networks
do
if test -f $dir/$file
then
sed -i.orig -e \
"s|\(<bridge.*$\)|\0\n <mac address='52:54:00:$mac4:$mac5:$mac6'/>|" \
$dir/$file
if test $? != 0
then
echo "failed to add <mac address='52:54:00:$mac4:$mac5:$mac6'/>" \
"to $dir/$file"
mv -f $dir/$file.orig $dir/$file
else
rm -f $dir/$file.orig
fi
fi
done
done
%endif
%if %{with_systemd}
if [ $1 -eq 1 ] ; then
# Initial installation
/bin/systemctl enable libvirtd.service >/dev/null 2>&1 || :
/bin/systemctl enable cgconfig.service >/dev/null 2>&1 || :
fi
%else
%if %{with_cgconfig}
# Starting with Fedora 16, systemd automounts all cgroups, and cgconfig is
# no longer a necessary service.
%if 0%{?rhel} || (0%{?fedora} && 0%{?fedora} < 16)
if [ "$1" -eq "1" ]; then
/sbin/chkconfig cgconfig on
fi
%endif
%endif
/sbin/chkconfig --add libvirtd
if [ "$1" -ge "1" ]; then
/sbin/service libvirtd condrestart > /dev/null 2>&1
fi
%endif
%preun daemon
%if %{with_systemd}
if [ $1 -eq 0 ] ; then
# Package removal, not upgrade
/bin/systemctl --no-reload disable libvirtd.service > /dev/null 2>&1 || :
/bin/systemctl stop libvirtd.service > /dev/null 2>&1 || :
fi
%else
if [ $1 = 0 ]; then
/sbin/service libvirtd stop 1>/dev/null 2>&1
/sbin/chkconfig --del libvirtd
fi
%endif
%postun daemon
%if %{with_systemd}
/bin/systemctl daemon-reload >/dev/null 2>&1 || :
if [ $1 -ge 1 ] ; then
# Package upgrade, not uninstall
/bin/systemctl try-restart libvirtd.service >/dev/null 2>&1 || :
fi
%endif
%if %{with_network}
%post daemon-config-network
if test $1 -eq 1 && test ! -f %{_sysconfdir}/libvirt/qemu/networks/default.xml ; then
UUID=`/usr/bin/uuidgen`
sed -e "s,</name>,</name>\n <uuid>$UUID</uuid>," \
< %{_datadir}/libvirt/networks/default.xml \
> %{_sysconfdir}/libvirt/qemu/networks/default.xml
ln -s ../default.xml %{_sysconfdir}/libvirt/qemu/networks/autostart/default.xml
fi
%endif
%endif
%if %{with_libvirtd}
%if %{with_systemd}
%triggerun -- libvirt < 0.9.4
%{_bindir}/systemd-sysv-convert --save libvirtd >/dev/null 2>&1 ||:
# If the package is allowed to autostart:
/bin/systemctl --no-reload enable libvirtd.service >/dev/null 2>&1 ||:
# Run these because the SysV package being removed won't do them
/sbin/chkconfig --del libvirtd >/dev/null 2>&1 || :
/bin/systemctl try-restart libvirtd.service >/dev/null 2>&1 || :
%endif
%endif
%preun client
%if %{with_systemd}
%else
if [ $1 = 0 ]; then
/sbin/chkconfig --del libvirt-guests
rm -f /var/lib/libvirt/libvirt-guests
fi
%endif
%post client
/sbin/ldconfig
%if %{with_systemd}
%else
/sbin/chkconfig --add libvirt-guests
%endif
%postun client -p /sbin/ldconfig
%if %{with_systemd}
%triggerun client -- libvirt < 0.9.4
%{_bindir}/systemd-sysv-convert --save libvirt-guests >/dev/null 2>&1 ||:
# If the package is allowed to autostart:
/bin/systemctl --no-reload enable libvirt-guests.service >/dev/null 2>&1 ||:
# Run these because the SysV package being removed won't do them
/sbin/chkconfig --del libvirt-guests >/dev/null 2>&1 || :
/bin/systemctl try-restart libvirt-guests.service >/dev/null 2>&1 || :
%endif
%files
Refactor the libvirt RPM daemon pieces There are a number of flaws with our packaging of the libvirtd daemon: - Installing 'libvirt' does not install 'qemu-kvm' or 'xen' etc which are required to actually run the hypervisor in question - Installing 'libvirt' pulls in the default configuration files which may not be wanted & cause problems if installed inside a guest - It is not possible to explicitly required all the peices required to manage a specific hypervisor This change takes the 'libvirt' RPM and and changes it thus - libvirt: just a virtual package with dep on libvirt-daemon, libvirt-daemon-config-network & libvirt-daemon-config-nwfilter - libvirt-daemon: the libvirt daemon and related pieces - libvirt-daemon-config-network: the default network config - libvirt-daemon-config-nwfilter: the network filter configs - libvirt-docs: the website HTML We then introduce some more virtual (empty) packages - libvirt-daemon-qemu: Deps on libvirt-daemon & 'qemu' - libvirt-daemon-kvm: Deps on libvirt-daemon & 'qemu-kvm' - libvirt-daemon-lxc: Deps on libvirt-daemon - libvirt-daemon-uml: Deps on libvirt-daemon - libvirt-daemon-xen: Deps on libvirt-daemon & 'xen' - libvirt-qemu: Deps on libvirt-daemon-qemu & libvirt-daemon-config-{network,nwfilter} - libvirt-kvm: Deps on libvirt-daemon-kvm & libvirt-daemon-config-{network,nwfilter} - libvirt-lxc: Deps on libvirt-daemon-lxc & libvirt-daemon-config-{network,nwfilter} - libvirt-uml: Deps on libvirt-daemon-uml & libvirt-daemon-config-{network,nwfilter} - libvirt-xen: Deps on libvirt-daemon-xen & libvirt-daemon-config-network My intent in the future is to turn on the driver modules by default, at which time 'libvirt-daemon' will cease to include any specific drivers, instead we'll get libvirt-daemon-driver-XXXX packages for each driver. The libvirt-daemon-XXX packages will then pull in each driver that they require. It is recommended that applications required a locally installed libvirtd daemon, use either 'Requires: libvirt-daemon-XXXX' or 'Requires: libvirt-XXX' and *not* "Requires: libvirt-daemon" or 'Requires: libvirt' * libvirt.spec.in: Refactor RPMs * docs/packaging.html.in, docs/sitemap.html.in: Document new RPM split rationale
2012-03-30 13:14:00 +00:00
%defattr(-, root, root)
%files docs
%defattr(-, root, root)
# Website
%dir %{_datadir}/doc/libvirt-docs-%{version}
%dir %{_datadir}/doc/libvirt-docs-%{version}/html
%{_datadir}/doc/libvirt-docs-%{version}/html/*
# API docs
%dir %{_datadir}/gtk-doc/html/libvirt/
%doc %{_datadir}/gtk-doc/html/libvirt/*.devhelp
%doc %{_datadir}/gtk-doc/html/libvirt/*.html
%doc %{_datadir}/gtk-doc/html/libvirt/*.png
%doc %{_datadir}/gtk-doc/html/libvirt/*.css
%if %{with_libvirtd}
%files daemon
%defattr(-, root, root)
%doc AUTHORS ChangeLog.gz NEWS README COPYING.LIB TODO
2007-03-12 16:32:43 +00:00
%dir %attr(0700, root, root) %{_sysconfdir}/libvirt/
%if %{with_network}
2007-03-12 16:32:43 +00:00
%dir %attr(0700, root, root) %{_sysconfdir}/libvirt/qemu/
%dir %attr(0700, root, root) %{_sysconfdir}/libvirt/qemu/networks/
%dir %attr(0700, root, root) %{_sysconfdir}/libvirt/qemu/networks/autostart
%endif
%dir %attr(0700, root, root) %{_sysconfdir}/libvirt/nwfilter/
%{_sysconfdir}/rc.d/init.d/libvirtd
%if %{with_systemd}
%{_unitdir}/libvirtd.service
%endif
%doc daemon/libvirtd.upstart
%config(noreplace) %{_sysconfdir}/sysconfig/libvirtd
%config(noreplace) %{_sysconfdir}/libvirt/libvirtd.conf
%if 0%{?fedora} >= 14 || 0%{?rhel} >= 6
%config(noreplace) %{_sysconfdir}/sysctl.d/libvirtd
%else
rm -f $RPM_BUILD_ROOT%{_sysconfdir}/sysctl.d/libvirtd
%endif
%dir %attr(0700, root, root) %{_localstatedir}/log/libvirt/qemu/
%dir %attr(0700, root, root) %{_localstatedir}/log/libvirt/lxc/
%dir %attr(0700, root, root) %{_localstatedir}/log/libvirt/uml/
%if %{with_libxl}
%dir %attr(0700, root, root) %{_localstatedir}/log/libvirt/libxl/
%endif
%config(noreplace) %{_sysconfdir}/logrotate.d/libvirtd
%if %{with_qemu}
%config(noreplace) %{_sysconfdir}/libvirt/qemu.conf
%config(noreplace) %{_sysconfdir}/logrotate.d/libvirtd.qemu
%endif
%if %{with_lxc}
%config(noreplace) %{_sysconfdir}/libvirt/lxc.conf
%config(noreplace) %{_sysconfdir}/logrotate.d/libvirtd.lxc
%endif
%if %{with_uml}
%config(noreplace) %{_sysconfdir}/logrotate.d/libvirtd.uml
%endif
%dir %{_datadir}/libvirt/
%if %{with_network}
%dir %{_datadir}/libvirt/networks/
%{_datadir}/libvirt/networks/default.xml
%endif
%ghost %dir %{_localstatedir}/run/libvirt/
%dir %attr(0711, root, root) %{_localstatedir}/lib/libvirt/images/
%dir %attr(0711, root, root) %{_localstatedir}/lib/libvirt/filesystems/
%dir %attr(0711, root, root) %{_localstatedir}/lib/libvirt/boot/
%dir %attr(0711, root, root) %{_localstatedir}/cache/libvirt/
%if %{with_qemu}
%ghost %dir %attr(0700, root, root) %{_localstatedir}/run/libvirt/qemu/
%dir %attr(0750, %{qemu_user}, %{qemu_group}) %{_localstatedir}/lib/libvirt/qemu/
%dir %attr(0750, %{qemu_user}, %{qemu_group}) %{_localstatedir}/cache/libvirt/qemu/
%endif
%if %{with_lxc}
%ghost %dir %{_localstatedir}/run/libvirt/lxc/
%dir %attr(0700, root, root) %{_localstatedir}/lib/libvirt/lxc/
%endif
%if %{with_uml}
%ghost %dir %{_localstatedir}/run/libvirt/uml/
%dir %attr(0700, root, root) %{_localstatedir}/lib/libvirt/uml/
%endif
%if %{with_libxl}
%ghost %dir %{_localstatedir}/run/libvirt/libxl/
%dir %attr(0700, root, root) %{_localstatedir}/lib/libvirt/libxl/
%endif
%if %{with_network}
%ghost %dir %{_localstatedir}/run/libvirt/network/
%dir %attr(0700, root, root) %{_localstatedir}/lib/libvirt/network/
%dir %attr(0755, root, root) %{_localstatedir}/lib/libvirt/dnsmasq/
%endif
%if %{with_qemu}
%{_datadir}/augeas/lenses/libvirtd_qemu.aug
%{_datadir}/augeas/lenses/tests/test_libvirtd_qemu.aug
%endif
%if %{with_lxc}
%{_datadir}/augeas/lenses/libvirtd_lxc.aug
%{_datadir}/augeas/lenses/tests/test_libvirtd_lxc.aug
%endif
%{_datadir}/augeas/lenses/libvirtd.aug
%{_datadir}/augeas/lenses/tests/test_libvirtd.aug
2007-12-06 15:35:54 +00:00
%if %{with_polkit}
%if 0%{?fedora} >= 12 || 0%{?rhel} >= 6
%{_datadir}/polkit-1/actions/org.libvirt.unix.policy
%else
%{_datadir}/PolicyKit/policy/org.libvirt.unix.policy
2007-12-06 15:35:54 +00:00
%endif
%endif
%dir %attr(0700, root, root) %{_localstatedir}/log/libvirt/
2008-08-21 09:28:54 +00:00
%if %{with_lxc}
%attr(0755, root, root) %{_libexecdir}/libvirt_lxc
%endif
%if %{with_storage_disk}
%attr(0755, root, root) %{_libexecdir}/libvirt_parthelper
%endif
%attr(0755, root, root) %{_libexecdir}/libvirt_iohelper
2007-06-26 23:04:49 +00:00
%attr(0755, root, root) %{_sbindir}/libvirtd
%{_mandir}/man8/libvirtd.8*
%if %{with_network}
%files daemon-config-network
%defattr(-, root, root)
%endif
%if %{with_nwfilter}
%files daemon-config-nwfilter
%defattr(-, root, root)
%{_sysconfdir}/libvirt/nwfilter/*.xml
%endif
%if %{with_qemu_tcg}
%files daemon-qemu
%defattr(-, root, root)
%endif
%if %{with_qemu_kvm}
%files daemon-kvm
%defattr(-, root, root)
%endif
%if %{with_lxc}
%files daemon-lxc
%defattr(-, root, root)
%endif
%if %{with_uml}
%files daemon-uml
%defattr(-, root, root)
%endif
%if %{with_xen} || %{with_libxl}
%files daemon-xen
%defattr(-, root, root)
%endif
%endif
%if %{with_sanlock}
%files lock-sanlock
%defattr(-, root, root)
%if %{with_qemu}
%config(noreplace) %{_sysconfdir}/libvirt/qemu-sanlock.conf
%endif
%attr(0755, root, root) %{_libdir}/libvirt/lock-driver/sanlock.so
%{_datadir}/augeas/lenses/libvirt_sanlock.aug
%{_datadir}/augeas/lenses/tests/test_libvirt_sanlock.aug
%dir %attr(0700, root, root) %{_localstatedir}/lib/libvirt/sanlock
Support automatic creation of leases for disks in sanlock The current sanlock plugin requires a central management application to manually add <lease> elements to each guest, to protect resources that are assigned to it (eg writable disks). This makes the sanlock plugin useless for usage in more ad hoc deployment environments where there is no central authority to associate disks with leases. This patch adds a mode where the sanlock plugin will automatically create leases for each assigned read-write disk, using a md5 checksum of the fully qualified disk path. This can work pretty well if guests are using stable disk paths for block devices eg /dev/disk/by-path/XXXX symlinks, or if all hosts have NFS volumes mounted in a consistent pattern. The plugin will create one lockspace for managing disks with filename /var/lib/libvirt/sanlock/__LIBVIRT__DISKS__. For each VM disks, there will be another file to hold a lease /var/lib/libvirt/sanlock/5903e5d25e087e60a20fe4566fab41fd Each VM disk lease is usually 1 MB in size. The script virt-sanlock-cleanup should be run periodically to remove unused lease files from the lockspace directory. To make use of this capability the admin will need to do several tasks: - Mount an NFS volume (or other shared filesystem) on /var/lib/libvirt/sanlock - Configure 'host_id' in /etc/libvirt/qemu-sanlock.conf with a unique value for each host with the same NFS mount - Toggle the 'auto_disk_leases' parameter in qemu-sanlock.conf Technically the first step can be skipped, in which case sanlock will only protect against 2 vms on the same host using the same disk (or the same VM being started twice due to error by libvirt). * src/locking/libvirt_sanlock.aug, src/locking/sanlock.conf, src/locking/test_libvirt_sanlock.aug: Add config params for configuring auto lease setup * libvirt.spec.in: Add virt-sanlock-cleanup program, man page * tools/virt-sanlock-cleanup.in: Script to purge unused disk resource lease files
2011-06-14 08:29:00 +00:00
%{_sbindir}/virt-sanlock-cleanup
%{_mandir}/man8/virt-sanlock-cleanup.8*
%endif
%files client -f %{name}.lang
%defattr(-, root, root)
%doc AUTHORS ChangeLog.gz NEWS README COPYING.LIB TODO
%config(noreplace) %{_sysconfdir}/libvirt/libvirt.conf
%{_mandir}/man1/virsh.1*
%{_mandir}/man1/virt-xml-validate.1*
%{_mandir}/man1/virt-pki-validate.1*
%{_mandir}/man1/virt-host-validate.1*
%{_bindir}/virsh
%{_bindir}/virt-xml-validate
%{_bindir}/virt-pki-validate
%{_bindir}/virt-host-validate
%{_libdir}/lib*.so.*
%if %{with_dtrace}
%{_datadir}/systemtap/tapset/libvirt_probes.stp
%{_datadir}/systemtap/tapset/libvirt_functions.stp
%endif
%dir %{_datadir}/libvirt/
%dir %{_datadir}/libvirt/schemas/
%{_datadir}/libvirt/schemas/basictypes.rng
%{_datadir}/libvirt/schemas/capability.rng
%{_datadir}/libvirt/schemas/domain.rng
%{_datadir}/libvirt/schemas/domaincommon.rng
%{_datadir}/libvirt/schemas/domainsnapshot.rng
%{_datadir}/libvirt/schemas/interface.rng
%{_datadir}/libvirt/schemas/network.rng
%{_datadir}/libvirt/schemas/networkcommon.rng
%{_datadir}/libvirt/schemas/nodedev.rng
%{_datadir}/libvirt/schemas/nwfilter.rng
%{_datadir}/libvirt/schemas/secret.rng
%{_datadir}/libvirt/schemas/storageencryption.rng
%{_datadir}/libvirt/schemas/storagepool.rng
%{_datadir}/libvirt/schemas/storagevol.rng
%{_datadir}/libvirt/cpu_map.xml
%{_sysconfdir}/rc.d/init.d/libvirt-guests
%if %{with_systemd}
%{_unitdir}/libvirt-guests.service
%endif
%config(noreplace) %{_sysconfdir}/sysconfig/libvirt-guests
%dir %attr(0755, root, root) %{_localstatedir}/lib/libvirt/
%if %{with_sasl}
%config(noreplace) %{_sysconfdir}/sasl2/libvirt.conf
%endif
%files devel
%defattr(-, root, root)
%{_libdir}/lib*.so
%dir %{_includedir}/libvirt
%{_includedir}/libvirt/*.h
%{_libdir}/pkgconfig/libvirt.pc
%dir %{_datadir}/libvirt/api/
%{_datadir}/libvirt/api/libvirt-api.xml
%{_datadir}/libvirt/api/libvirt-qemu-api.xml
%doc docs/*.html docs/html docs/*.gif
%doc docs/libvirt-api.xml
%doc examples/hellolibvirt
%doc examples/domain-events/events-c
%doc examples/dominfo
%doc examples/domsuspend
%doc examples/openauth
%doc examples/xml
Add dtrace static probes in libvirtd Adds initial support for dtrace static probes in libvirtd daemon, assuming use of systemtap dtrace compat shim on Linux. The probes are inserted for network client connect, disconnect, TLS handshake states and authentication protocol states. This can be tested by running the xample program and then attempting to connect with any libvirt client (virsh, virt-manager, etc). # stap examples/systemtap/client.stp Client fd=44 connected readonly=0 Client fd=44 auth polkit deny pid:24997,uid:500 Client fd=44 disconnected Client fd=46 connected readonly=1 Client fd=46 auth sasl allow test Client fd=46 disconnected The libvirtd.stp file should also really not be required, since it is duplicated info that is already available in the main probes.d definition file. A script to autogenerate the .stp file is needed, either in libvirtd tree, or better as part of systemtap itself. * Makefile.am: Add examples/systemtap subdir * autobuild.sh: Disable dtrace for mingw32 * configure.ac: Add check for dtrace * daemon/.gitignore: Ignore generated dtrace probe file * daemon/Makefile.am: Build dtrace probe header & object files * daemon/libvirtd.stp: SystemTAP convenience probeset * daemon/libvirtd.c: Add connect/disconnect & TLS probes * daemon/remote.c: Add SASL and PolicyKit auth probes * daemon/probes.d: Master probe definition * daemon/libvirtd.h: Add convenience macro for probes so that compilation is a no-op when dtrace is not available * examples/systemtap/Makefile.am, examples/systemtap/client.stp Example systemtap script using dtrace probe markers * libvirt.spec.in: Enable dtrace on F13/RHEL6 * mingw32-libvirt.spec.in: Force disable dtrace
2010-09-14 16:30:32 +00:00
%doc examples/systemtap
%if %{with_python}
%files python
%defattr(-, root, root)
%doc AUTHORS NEWS README COPYING.LIB
%{_libdir}/python*/site-packages/libvirt.py*
2011-09-09 11:11:36 +00:00
%{_libdir}/python*/site-packages/libvirt_qemu.py*
%{_libdir}/python*/site-packages/libvirtmod*
%doc python/tests/*.py
%doc python/TODO
%doc examples/python
%doc examples/domain-events/events-python
%endif
%changelog
* Tue Apr 3 2012 Daniel Veillard <veillard@redhat.com> - 0.9.11-1
- Add support for the suspend event
- Add support for event tray moved of removable disks
- qemu: Support numad
- cpustats: API, improvements and qemu support
- qemu: support type='hostdev' network devices at domain start
- Introduce virDomainPMWakeup API
- network: support Open vSwitch
- a number of snapshot improvements
- many improvements and bug fixes
* Mon Feb 13 2012 Daniel Veillard <veillard@redhat.com> - 0.9.10-1
- Add support for sVirt in the LXC driver
- block rebase: add new API virDomainBlockRebase
- API: Add api to set and get domain metadata
- virDomainGetDiskErrors public API
- conf: add rawio attribute to disk element of domain XML
- Add new public API virDomainGetCPUStats()
- Introduce virDomainPMSuspendForDuration API
- resize: add virStorageVolResize() API
- Add a virt-host-validate command to sanity check HV config
- Add new virDomainShutdownFlags API
- QEMU guest agent support
- many improvements and bug fixes
* Sat Jan 7 2012 Daniel Veillard <veillard@redhat.com> - 0.9.9-1
- Add API virDomain{S,G}etInterfaceParameters
- Add API virDomain{G, S}etNumaParameters
- Add support for ppc64 qemu
- Support Xen domctl v8
- many improvements and bug fixes
* Thu Dec 8 2011 Daniel Veillard <veillard@redhat.com> - 0.9.8-1
- Add support for QEMU 1.0
- Add preliminary PPC cpu driver
- Add new API virDomain{Set, Get}BlockIoTune
- block_resize: Define the new API
- Add a public API to invoke suspend/resume on the host
- various improvements for LXC containers
- Define keepalive protocol and add virConnectIsAlive API
- Add support for STP and VLAN filtering
- many improvements and bug fixes
* Tue Nov 8 2011 Daniel Veillard <veillard@redhat.com> - 0.9.7-1
- esx: support vSphere 5.x
- vbox: support for VirtualBox 4.1
- Introduce the virDomainOpenGraphics API
- Add AHCI support to qemu driver
- snapshot: many improvements and 2 new APIs
- api: Add public api for 'reset'
- many improvements and bug fixes
2011-09-22 06:53:23 +00:00
* Thu Sep 22 2011 Daniel Veillard <veillard@redhat.com> - 0.9.6-1
- Fix the qemu reboot bug and a few others bug fixes
* Tue Sep 20 2011 Daniel Veillard <veillard@redhat.com> - 0.9.5-1
- many snapshot improvements (Eric Blake)
- latency: Define new public API and structure (Osier Yang)
- USB2 and various USB improvements (Marc-André Lureau)
- storage: Add fs pool formatting (Osier Yang)
- Add public API for getting migration speed (Jim Fehlig)
- Add basic driver for Microsoft Hyper-V (Matthias Bolte)
- many improvements and bug fixes
* Wed Aug 3 2011 Daniel Veillard <veillard@redhat.com> - 0.9.4-1
- network bandwidth QoS control
- Add new API virDomainBlockPull*
- save: new API to manipulate save file images
- CPU bandwidth limits support
- allow to send NMI and key event to guests
- new API virDomainUndefineFlags
- Implement code to attach to external QEMU instances
- bios: Add support for SGA
- various missing python binding
- many improvements and bug fixes
* Mon Jul 4 2011 Daniel Veillard <veillard@redhat.com> - 0.9.3-1
- new API virDomainGetVcpupinInfo
- Add TXT record support for virtual DNS service
- Support reboots with the QEMU driver
- New API virDomainGetControlInfo API
- New API virNodeGetMemoryStats
- New API virNodeGetCPUTime
- New API for send-key
- New API virDomainPinVcpuFlags
- support multifunction PCI device
- lxc: various improvements
- many improvements and bug fixes
* Mon Jun 6 2011 Daniel Veillard <veillard@redhat.com> - 0.9.2-1
- Framework for lock manager plugins
- API for network config change transactions
- flags for setting memory parameters
- virDomainGetState public API
- qemu: allow blkstat/blkinfo calls during migration
- Introduce migration v3 API
- Defining the Screenshot public API
- public API for NMI injection
- Various improvements and bug fixes
* Thu May 5 2011 Daniel Veillard <veillard@redhat.com> - 0.9.1-1
- support various persistent domain updates
- improvements on memory APIs
- Add virDomainEventRebootNew
- various improvements to libxl driver
- Spice: support audio, images and stream compression
- Various improvements and bug fixes
* Mon Apr 4 2011 Daniel Veillard <veillard@redhat.com> - 0.9.0-1
- Support cputune cpu usage tuning
- Add public APIs for storage volume upload/download
- Add public API for setting migration speed on the fly
- Add libxenlight driver
- qemu: support migration to fd
- libvirt: add virDomain{Get,Set}BlkioParameters
- setmem: introduce a new libvirt API (virDomainSetMemoryFlags)
- Expose event loop implementation as a public API
- Dump the debug buffer to libvirtd.log on fatal signal
- Audit support
- Various improvements and bug fixes
* Thu Feb 17 2011 Daniel Veillard <veillard@redhat.com> - 0.8.8-1
- expose new API for sysinfo extraction
- cgroup blkio weight support
- smartcard device support
- qemu: Support per-device boot ordering
- Various improvements and bug fixes
* Tue Jan 4 2011 Daniel Veillard <veillard@redhat.com> - 0.8.7-1
- Preliminary support for VirtualBox 4.0
- IPv6 support
- Add VMware Workstation and Player driver driver
- Add network disk support
- Various improvements and bug fixes
* Tue Nov 30 2010 Daniel Veillard <veillard@redhat.com> - 0.8.6-1
- Add support for iSCSI target auto-discovery
- QED: Basic support for QED images
- remote console support
- support for SPICE graphics
- sysinfo and VMBIOS support
- virsh qemu-monitor-command
- various improvements and bug fixes
* Fri Oct 29 2010 Daniel Veillard <veillard@redhat.com> - 0.8.5-1
- Enable JSON and netdev features in QEMU >= 0.13
- framework for auditing integration
- framework DTrace/SystemTap integration
- Setting the number of vcpu at boot
- Enable support for nested SVM
- Virtio plan9fs filesystem QEMU
- Memory parameter controls
- various improvements and bug fixes
* Fri Sep 10 2010 Daniel Veillard <veillard@redhat.com> - 0.8.4-1
- big improvements to UML driver
- various improvements and bug fixes
* Wed Aug 4 2010 Daniel Veillard <veillard@redhat.com> - 0.8.3-1
- esx: Support vSphere 4.1
- Qemu arbitrary monitor commands
- Qemu Monitor API entry point
- various improvements and bug fixes
* Mon Jul 5 2010 Daniel Veillard <veillard@redhat.com> - 0.8.2-1
- phyp: adding support for IVM
- libvirt: introduce domainCreateWithFlags API
- add 802.1Qbh and 802.1Qbg switches handling
- Support for VirtualBox version 3.2
- Init script for handling guests on shutdown/boot
- qemu: live migration with non-shared storage for kvm
* Fri Apr 30 2010 Daniel Veillard <veillard@redhat.com> - 0.8.1-1
- Starts dnsmasq from libvirtd with --dhcp-hostsfile
- Add virDomainGetBlockInfo API to query disk sizing
- a lot of bug fixes and cleanups
* Mon Apr 12 2010 Daniel Veillard <veillard@redhat.com> - 0.8.0-1
- Snapshotting support (QEmu/VBox/ESX)
- Network filtering API
- XenAPI driver
- new APIs for domain events
- Libvirt managed save API
- timer subselection for domain clock
- synchronous hooks
- API to update guest CPU to host CPU
- virDomainUpdateDeviceFlags new API
- migrate max downtime API
- volume wiping API
- and many bug fixes
* Fri Mar 5 2010 Daniel Veillard <veillard@redhat.com> - 0.7.7-1
- macvtap support
- async job handling
- virtio channel
- computing baseline CPU
- virDomain{Attach,Detach}DeviceFlags
- assorted bug fixes and lots of cleanups
* Wed Feb 3 2010 Daniel Veillard <veillard@redhat.com> - 0.7.6-1
2009-12-23 16:00:22 +00:00
* Wed Dec 23 2009 Daniel Veillard <veillard@redhat.com> - 0.7.5-1
- Add new API virDomainMemoryStats
- Public API and domain extension for CPU flags
- vbox: Add support for version 3.1
- Support QEMU's virtual FAT block device driver
- a lot of fixes
* Fri Nov 20 2009 Daniel Veillard <veillard@redhat.com> - 0.7.3-1
- udev node device backend
- API to check object properties
- better QEmu monitor processing
- MAC address based port filtering for qemu
- support IPv6 and multiple addresses per interfaces
- a lot of fixes
* Tue Sep 15 2009 Daniel Veillard <veillard@redhat.com> - 0.7.1-1
- ESX, VBox driver updates
- mutipath support
- support for encrypted (qcow) volume
- compressed save image format for Qemu/KVM
- QEmu host PCI device hotplug support
- configuration of huge pages in guests
- a lot of fixes
* Wed Aug 5 2009 Daniel Veillard <veillard@redhat.com> - 0.7.0-1
- ESX, VBox3, Power Hypervisor drivers
- new net filesystem glusterfs
- Storage cloning for LVM and Disk backends
- interface implementation based on netcf
- Support cgroups in QEMU driver
- QEmu hotplug NIC support
- a lot of fixes
* Fri Jul 3 2009 Daniel Veillard <veillard@redhat.com> - 0.6.5-1
- release of 0.6.5
* Fri May 29 2009 Daniel Veillard <veillard@redhat.com> - 0.6.4-1
- release of 0.6.4
- various new APIs
* Fri Apr 24 2009 Daniel Veillard <veillard@redhat.com> - 0.6.3-1
- release of 0.6.3
- VirtualBox driver
* Fri Apr 3 2009 Daniel Veillard <veillard@redhat.com> - 0.6.2-1
- release of 0.6.2
* Fri Mar 4 2009 Daniel Veillard <veillard@redhat.com> - 0.6.1-1
- release of 0.6.1
* Sat Jan 31 2009 Daniel Veillard <veillard@redhat.com> - 0.6.0-1
- release of 0.6.0
* Tue Nov 25 2008 Daniel Veillard <veillard@redhat.com> - 0.5.0-1
- release of 0.5.0
* Tue Sep 23 2008 Daniel Veillard <veillard@redhat.com> - 0.4.6-1
- release of 0.4.6
* Mon Sep 8 2008 Daniel Veillard <veillard@redhat.com> - 0.4.5-1
- release of 0.4.5
* Wed Jun 25 2008 Daniel Veillard <veillard@redhat.com> - 0.4.4-1
- release of 0.4.4
- mostly a few bug fixes from 0.4.3
* Thu Jun 12 2008 Daniel Veillard <veillard@redhat.com> - 0.4.3-1
- release of 0.4.3
- lots of bug fixes and small improvements
* Tue Apr 8 2008 Daniel Veillard <veillard@redhat.com> - 0.4.2-1
- release of 0.4.2
- lots of bug fixes and small improvements
* Mon Mar 3 2008 Daniel Veillard <veillard@redhat.com> - 0.4.1-1
- Release of 0.4.1
- Storage APIs
- xenner support
- lots of assorted improvements, bugfixes and cleanups
- documentation and localization improvements
2007-12-17 23:51:07 +00:00
* Tue Dec 18 2007 Daniel Veillard <veillard@redhat.com> - 0.4.0-1
- Release of 0.4.0
- SASL based authentication
- PolicyKit authentication
- improved NUMA and statistics support
- lots of assorted improvements, bugfixes and cleanups
- documentation and localization improvements
* Sun Sep 30 2007 Daniel Veillard <veillard@redhat.com> - 0.3.3-1
- Release of 0.3.3
- Avahi support
- NUMA support
- lots of assorted improvements, bugfixes and cleanups
- documentation and localization improvements
2007-08-21 15:04:46 +00:00
* Tue Aug 21 2007 Daniel Veillard <veillard@redhat.com> - 0.3.2-1
- Release of 0.3.2
- API for domains migration
- APIs for collecting statistics on disks and interfaces
- lots of assorted bugfixes and cleanups
- documentation and localization improvements
* Tue Jul 24 2007 Daniel Veillard <veillard@redhat.com> - 0.3.1-1
- Release of 0.3.1
- localtime clock support
- PS/2 and USB input devices
- lots of assorted bugfixes and cleanups
- documentation and localization improvements
* Mon Jul 9 2007 Daniel Veillard <veillard@redhat.com> - 0.3.0-1
- Release of 0.3.0
- Secure remote access support
- unification of daemons
- lots of assorted bugfixes and cleanups
- documentation and localization improvements
* Fri Jun 8 2007 Daniel Veillard <veillard@redhat.com> - 0.2.3-1
- Release of 0.2.3
- lot of assorted bugfixes and cleanups
- support for Xen-3.1
- new scheduler API
* Tue Apr 17 2007 Daniel Veillard <veillard@redhat.com> - 0.2.2-1
- Release of 0.2.2
- lot of assorted bugfixes and cleanups
- preparing for Xen-3.0.5
* Thu Mar 22 2007 Jeremy Katz <katzj@redhat.com> - 0.2.1-2.fc7
- don't require xen; we don't need the daemon and can control non-xen now
- fix scriptlet error (need to own more directories)
- update description text
* Fri Mar 16 2007 Daniel Veillard <veillard@redhat.com> - 0.2.1-1
- Release of 0.2.1
- lot of bug and portability fixes
- Add support for network autostart and init scripts
- New API to detect the virtualization capabilities of a host
- Documentation updates
* Fri Feb 23 2007 Daniel P. Berrange <berrange@redhat.com> - 0.2.0-4.fc7
- Fix loading of guest & network configs
* Fri Feb 16 2007 Daniel P. Berrange <berrange@redhat.com> - 0.2.0-3.fc7
- Disable kqemu support since its not in Fedora qemu binary
- Fix for -vnc arg syntax change in 0.9.0 QEMU
* Thu Feb 15 2007 Daniel P. Berrange <berrange@redhat.com> - 0.2.0-2.fc7
- Fixed path to qemu daemon for autostart
- Fixed generation of <features> block in XML
- Pre-create config directory at startup
* Wed Feb 14 2007 Daniel Veillard <veillard@redhat.com> 0.2.0-1.fc7
- support for KVM and QEmu
- support for network configuration
- assorted fixes
* Mon Jan 22 2007 Daniel Veillard <veillard@redhat.com> 0.1.11-1.fc7
- finish inactive Xen domains support
- memory leak fix
- RelaxNG schemas for XML configs
* Wed Dec 20 2006 Daniel Veillard <veillard@redhat.com> 0.1.10-1.fc7
- support for inactive Xen domains
- improved support for Xen display and vnc
- a few bug fixes
- localization updates
* Thu Dec 7 2006 Jeremy Katz <katzj@redhat.com> - 0.1.9-2
- rebuild against python 2.5
* Wed Nov 29 2006 Daniel Veillard <veillard@redhat.com> 0.1.9-1
- better error reporting
- python bindings fixes and extensions
- add support for shareable drives
- add support for non-bridge style networking
- hot plug device support
- added support for inactive domains
- API to dump core of domains
- various bug fixes, cleanups and improvements
- updated the localization
* Tue Nov 7 2006 Daniel Veillard <veillard@redhat.com> 0.1.8-3
- it's pkgconfig not pgkconfig !
* Mon Nov 6 2006 Daniel Veillard <veillard@redhat.com> 0.1.8-2
- fixing spec file, added %dist, -devel requires pkgconfig and xen-devel
- Resolves: rhbz#202320
* Mon Oct 16 2006 Daniel Veillard <veillard@redhat.com> 0.1.8-1
- fix missing page size detection code for ia64
- fix mlock size when getting domain info list from hypervisor
- vcpu number initialization
- don't label crashed domains as shut off
- fix virsh man page
- blktapdd support for alternate drivers like blktap
- memory leak fixes (xend interface and XML parsing)
- compile fix
- mlock/munlock size fixes
* Fri Sep 22 2006 Daniel Veillard <veillard@redhat.com> 0.1.7-1
- Fix bug when running against xen-3.0.3 hypercalls
- Fix memory bug when getting vcpus info from xend
* Fri Sep 22 2006 Daniel Veillard <veillard@redhat.com> 0.1.6-1
- Support for localization
- Support for new Xen-3.0.3 cdrom and disk configuration
- Support for setting VNC port
- Fix bug when running against xen-3.0.2 hypercalls
- Fix reconnection problem when talking directly to http xend
* Tue Sep 5 2006 Jeremy Katz <katzj@redhat.com> - 0.1.5-3
- patch from danpb to support new-format cd devices for HVM guests
* Tue Sep 5 2006 Daniel Veillard <veillard@redhat.com> 0.1.5-2
- reactivating ia64 support
* Tue Sep 5 2006 Daniel Veillard <veillard@redhat.com> 0.1.5-1
- new release
- bug fixes
- support for new hypervisor calls
- early code for config files and defined domains
* Mon Sep 4 2006 Daniel Berrange <berrange@redhat.com> - 0.1.4-5
- add patch to address dom0_ops API breakage in Xen 3.0.3 tree
* Mon Aug 28 2006 Jeremy Katz <katzj@redhat.com> - 0.1.4-4
- add patch to support paravirt framebuffer in Xen
* Mon Aug 21 2006 Daniel Veillard <veillard@redhat.com> 0.1.4-3
- another patch to fix network handling in non-HVM guests
* Thu Aug 17 2006 Daniel Veillard <veillard@redhat.com> 0.1.4-2
- patch to fix virParseUUID()
* Wed Aug 16 2006 Daniel Veillard <veillard@redhat.com> 0.1.4-1
- vCPUs and affinity support
- more complete XML, console and boot options
- specific features support
- enforced read-only connections
- various improvements, bug fixes
* Wed Aug 2 2006 Jeremy Katz <katzj@redhat.com> - 0.1.3-6
- add patch from pvetere to allow getting uuid from libvirt
* Wed Aug 2 2006 Jeremy Katz <katzj@redhat.com> - 0.1.3-5
- build on ia64 now
* Thu Jul 27 2006 Jeremy Katz <katzj@redhat.com> - 0.1.3-4
- don't BR xen, we just need xen-devel
* Thu Jul 27 2006 Daniel Veillard <veillard@redhat.com> 0.1.3-3
- need rebuild since libxenstore is now versionned
* Mon Jul 24 2006 Mark McLoughlin <markmc@redhat.com> - 0.1.3-2
- Add BuildRequires: xen-devel
* Wed Jul 12 2006 Jesse Keating <jkeating@redhat.com> - 0.1.3-1.1
- rebuild
* Tue Jul 11 2006 Daniel Veillard <veillard@redhat.com> 0.1.3-1
- support for HVM Xen guests
- various bugfixes
* Mon Jul 3 2006 Daniel Veillard <veillard@redhat.com> 0.1.2-1
- added a proxy mechanism for read only access using httpu
- fixed header includes paths
* Wed Jun 21 2006 Daniel Veillard <veillard@redhat.com> 0.1.1-1
- extend and cleanup the driver infrastructure and code
- python examples
- extend uuid support
- bug fixes, buffer handling cleanups
- support for new Xen hypervisor API
- test driver for unit testing
- virsh --conect argument
* Mon Apr 10 2006 Daniel Veillard <veillard@redhat.com> 0.1.0-1
- various fixes
- new APIs: for Node information and Reboot
- virsh improvements and extensions
- documentation updates and man page
- enhancement and fixes of the XML description format
* Tue Feb 28 2006 Daniel Veillard <veillard@redhat.com> 0.0.6-1
- added error handling APIs
- small bug fixes
- improve python bindings
- augment documentation and regression tests
* Thu Feb 23 2006 Daniel Veillard <veillard@redhat.com> 0.0.5-1
- new domain creation API
- new UUID based APIs
- more tests, documentation, devhelp
- bug fixes
* Fri Feb 10 2006 Daniel Veillard <veillard@redhat.com> 0.0.4-1
- fixes some problems in 0.0.3 due to the change of names
* Wed Feb 8 2006 Daniel Veillard <veillard@redhat.com> 0.0.3-1
- changed library name to libvirt from libvir, complete and test the python
bindings
2006-01-31 10:21:10 +00:00
* Sun Jan 29 2006 Daniel Veillard <veillard@redhat.com> 0.0.2-1
- upstream release of 0.0.2, use xend, save and restore added, python bindings
fixed
* Wed Nov 2 2005 Daniel Veillard <veillard@redhat.com> 0.0.1-1
- created