libvirt/bootstrap

947 lines
27 KiB
Plaintext
Raw Normal View History

#! /bin/sh
# Print a version string.
scriptversion=2011-01-21.16; # UTC
# Bootstrap this package from checked-out sources.
# Copyright (C) 2003-2011 Free Software Foundation, Inc.
# This program is free software: you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation, either version 3 of the License, or
# (at your option) any later version.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/>.
# Originally written by Paul Eggert. The canonical version of this
# script is maintained as build-aux/bootstrap in gnulib, however, to
# be useful to your project, you should place a copy of it under
# version control in the top-level directory of your project. The
# intent is that all customization can be done with a bootstrap.conf
# file also maintained in your version control; gnulib comes with a
# template build-aux/bootstrap.conf to get you started.
# Please report bugs or propose patches to bug-gnulib@gnu.org.
nl='
'
# Ensure file names are sorted consistently across platforms.
LC_ALL=C
export LC_ALL
local_gl_dir=gl
# Temporary directory names.
bt='._bootmp'
bt_regex=`echo "$bt"| sed 's/\./[.]/g'`
bt2=${bt}2
me=$0
Use gnulib, starting with its physmem and getaddrinfo modules. New files go into these directories: gnulib/lib gnulib/m4 gnulib/tests * bootstrap: A wrapper around gnulib-tool. * configure.in: Invoke gl_EARLY and gl_INIT, being careful to put gl_EARLY before any macro that uses AC_COMPILE_IFELSE. (AC_OUTPUT): Add lib/Makefile and gl-tests/Makefile. Remove m4/Makefile. * Makefile.am (SUBDIRS): Add gnulib/lib and remove m4. Add gnulib/tests early enough that those tests run before any libvirt unit tests. * m4/Makefile.am: Remove file. Not needed. * src/Makefile.am (INCLUDES): Add -I$(top_srcdir)/gnulib/lib -I../gnulib/lib. (LDADDS, libvirt_la_LIBADD): Add ../gnulib/lib/libgnu.la. * src/nodeinfo.c: Include "physmem.h". * qemud/qemud.c, src/remote_internal.c: Include "getaddrinfo.h". (MEMINFO_PATH, linuxNodeInfoMemPopulate): Remove definitions. (virNodeInfoPopulate): Use physmem_total, not linuxNodeInfoMemPopulate. * tests/Makefile.am (INCLUDES): Add -I$(top_srcdir)/gnulib/lib -I../gnulib/lib. (LDADDS): Add ../gnulib/lib/libgnu.la. * qemud/Makefile.am (libvirtd_LDADD): Add ../gnulib/lib/libgnu.la. * tests/nodeinfotest.c (linuxTestCompareFiles): No longer read total memory from a file. Update expected output not to include "Memory: NNNN" * tests/nodeinfodata/linux-nodeinfo-1.txt: * tests/nodeinfodata/linux-nodeinfo-2.txt: * tests/nodeinfodata/linux-nodeinfo-3.txt: * tests/nodeinfodata/linux-nodeinfo-4.txt: * tests/nodeinfodata/linux-nodeinfo-5.txt: * tests/nodeinfodata/linux-nodeinfo-6.txt: * src/test.c [WITH_TEST]: Remove definition of _GNU_SOURCE that would conflict with the one now in "config.h". * autogen.sh: Add -I gnulib/m4. * src/conf.c, src/sexpr.c: Don't define _GNU_SOURCE. Instead, include "config.h". * qemud/qemud.c: Remove definition of _GNU_SOURCE. * src/openvz_driver.c: Likewise. * src/qemu_driver.c: Likewise. * src/remote_internal.c: Likewise. * configure.in: Use AC_CONFIG_AUX_DIR(build-aux), so that a bunch of gettextize-generated files go into build-aux/, rather than in the top-level directory. * .cvsignore: Adjust. * build-aux/.cvsignore: New file. Author: Jim Meyering <meyering@redhat.com>
2007-12-05 21:31:07 +00:00
usage() {
cat <<EOF
Usage: $me [OPTION]...
Use gnulib, starting with its physmem and getaddrinfo modules. New files go into these directories: gnulib/lib gnulib/m4 gnulib/tests * bootstrap: A wrapper around gnulib-tool. * configure.in: Invoke gl_EARLY and gl_INIT, being careful to put gl_EARLY before any macro that uses AC_COMPILE_IFELSE. (AC_OUTPUT): Add lib/Makefile and gl-tests/Makefile. Remove m4/Makefile. * Makefile.am (SUBDIRS): Add gnulib/lib and remove m4. Add gnulib/tests early enough that those tests run before any libvirt unit tests. * m4/Makefile.am: Remove file. Not needed. * src/Makefile.am (INCLUDES): Add -I$(top_srcdir)/gnulib/lib -I../gnulib/lib. (LDADDS, libvirt_la_LIBADD): Add ../gnulib/lib/libgnu.la. * src/nodeinfo.c: Include "physmem.h". * qemud/qemud.c, src/remote_internal.c: Include "getaddrinfo.h". (MEMINFO_PATH, linuxNodeInfoMemPopulate): Remove definitions. (virNodeInfoPopulate): Use physmem_total, not linuxNodeInfoMemPopulate. * tests/Makefile.am (INCLUDES): Add -I$(top_srcdir)/gnulib/lib -I../gnulib/lib. (LDADDS): Add ../gnulib/lib/libgnu.la. * qemud/Makefile.am (libvirtd_LDADD): Add ../gnulib/lib/libgnu.la. * tests/nodeinfotest.c (linuxTestCompareFiles): No longer read total memory from a file. Update expected output not to include "Memory: NNNN" * tests/nodeinfodata/linux-nodeinfo-1.txt: * tests/nodeinfodata/linux-nodeinfo-2.txt: * tests/nodeinfodata/linux-nodeinfo-3.txt: * tests/nodeinfodata/linux-nodeinfo-4.txt: * tests/nodeinfodata/linux-nodeinfo-5.txt: * tests/nodeinfodata/linux-nodeinfo-6.txt: * src/test.c [WITH_TEST]: Remove definition of _GNU_SOURCE that would conflict with the one now in "config.h". * autogen.sh: Add -I gnulib/m4. * src/conf.c, src/sexpr.c: Don't define _GNU_SOURCE. Instead, include "config.h". * qemud/qemud.c: Remove definition of _GNU_SOURCE. * src/openvz_driver.c: Likewise. * src/qemu_driver.c: Likewise. * src/remote_internal.c: Likewise. * configure.in: Use AC_CONFIG_AUX_DIR(build-aux), so that a bunch of gettextize-generated files go into build-aux/, rather than in the top-level directory. * .cvsignore: Adjust. * build-aux/.cvsignore: New file. Author: Jim Meyering <meyering@redhat.com>
2007-12-05 21:31:07 +00:00
Bootstrap this package from the checked-out sources.
Options:
--gnulib-srcdir=DIRNAME specify the local directory where gnulib
Use gnulib, starting with its physmem and getaddrinfo modules. New files go into these directories: gnulib/lib gnulib/m4 gnulib/tests * bootstrap: A wrapper around gnulib-tool. * configure.in: Invoke gl_EARLY and gl_INIT, being careful to put gl_EARLY before any macro that uses AC_COMPILE_IFELSE. (AC_OUTPUT): Add lib/Makefile and gl-tests/Makefile. Remove m4/Makefile. * Makefile.am (SUBDIRS): Add gnulib/lib and remove m4. Add gnulib/tests early enough that those tests run before any libvirt unit tests. * m4/Makefile.am: Remove file. Not needed. * src/Makefile.am (INCLUDES): Add -I$(top_srcdir)/gnulib/lib -I../gnulib/lib. (LDADDS, libvirt_la_LIBADD): Add ../gnulib/lib/libgnu.la. * src/nodeinfo.c: Include "physmem.h". * qemud/qemud.c, src/remote_internal.c: Include "getaddrinfo.h". (MEMINFO_PATH, linuxNodeInfoMemPopulate): Remove definitions. (virNodeInfoPopulate): Use physmem_total, not linuxNodeInfoMemPopulate. * tests/Makefile.am (INCLUDES): Add -I$(top_srcdir)/gnulib/lib -I../gnulib/lib. (LDADDS): Add ../gnulib/lib/libgnu.la. * qemud/Makefile.am (libvirtd_LDADD): Add ../gnulib/lib/libgnu.la. * tests/nodeinfotest.c (linuxTestCompareFiles): No longer read total memory from a file. Update expected output not to include "Memory: NNNN" * tests/nodeinfodata/linux-nodeinfo-1.txt: * tests/nodeinfodata/linux-nodeinfo-2.txt: * tests/nodeinfodata/linux-nodeinfo-3.txt: * tests/nodeinfodata/linux-nodeinfo-4.txt: * tests/nodeinfodata/linux-nodeinfo-5.txt: * tests/nodeinfodata/linux-nodeinfo-6.txt: * src/test.c [WITH_TEST]: Remove definition of _GNU_SOURCE that would conflict with the one now in "config.h". * autogen.sh: Add -I gnulib/m4. * src/conf.c, src/sexpr.c: Don't define _GNU_SOURCE. Instead, include "config.h". * qemud/qemud.c: Remove definition of _GNU_SOURCE. * src/openvz_driver.c: Likewise. * src/qemu_driver.c: Likewise. * src/remote_internal.c: Likewise. * configure.in: Use AC_CONFIG_AUX_DIR(build-aux), so that a bunch of gettextize-generated files go into build-aux/, rather than in the top-level directory. * .cvsignore: Adjust. * build-aux/.cvsignore: New file. Author: Jim Meyering <meyering@redhat.com>
2007-12-05 21:31:07 +00:00
sources reside. Use this if you already
have gnulib sources on your machine, and
do not want to waste your bandwidth downloading
them again. Defaults to \$GNULIB_SRCDIR
--bootstrap-sync if this bootstrap script is not identical to
the version in the local gnulib sources,
update this script, and then restart it with
/bin/sh or the shell \$CONFIG_SHELL
--no-bootstrap-sync do not check whether bootstrap is out of sync
--copy copy files instead of creating symbolic links
--force attempt to bootstrap even if the sources seem
not to have been checked out
--no-git do not use git to update gnulib. Requires that
--gnulib-srcdir point to a correct gnulib snapshot
--skip-po do not download po files
If the file $me.conf exists in the same directory as this script, its
Use gnulib, starting with its physmem and getaddrinfo modules. New files go into these directories: gnulib/lib gnulib/m4 gnulib/tests * bootstrap: A wrapper around gnulib-tool. * configure.in: Invoke gl_EARLY and gl_INIT, being careful to put gl_EARLY before any macro that uses AC_COMPILE_IFELSE. (AC_OUTPUT): Add lib/Makefile and gl-tests/Makefile. Remove m4/Makefile. * Makefile.am (SUBDIRS): Add gnulib/lib and remove m4. Add gnulib/tests early enough that those tests run before any libvirt unit tests. * m4/Makefile.am: Remove file. Not needed. * src/Makefile.am (INCLUDES): Add -I$(top_srcdir)/gnulib/lib -I../gnulib/lib. (LDADDS, libvirt_la_LIBADD): Add ../gnulib/lib/libgnu.la. * src/nodeinfo.c: Include "physmem.h". * qemud/qemud.c, src/remote_internal.c: Include "getaddrinfo.h". (MEMINFO_PATH, linuxNodeInfoMemPopulate): Remove definitions. (virNodeInfoPopulate): Use physmem_total, not linuxNodeInfoMemPopulate. * tests/Makefile.am (INCLUDES): Add -I$(top_srcdir)/gnulib/lib -I../gnulib/lib. (LDADDS): Add ../gnulib/lib/libgnu.la. * qemud/Makefile.am (libvirtd_LDADD): Add ../gnulib/lib/libgnu.la. * tests/nodeinfotest.c (linuxTestCompareFiles): No longer read total memory from a file. Update expected output not to include "Memory: NNNN" * tests/nodeinfodata/linux-nodeinfo-1.txt: * tests/nodeinfodata/linux-nodeinfo-2.txt: * tests/nodeinfodata/linux-nodeinfo-3.txt: * tests/nodeinfodata/linux-nodeinfo-4.txt: * tests/nodeinfodata/linux-nodeinfo-5.txt: * tests/nodeinfodata/linux-nodeinfo-6.txt: * src/test.c [WITH_TEST]: Remove definition of _GNU_SOURCE that would conflict with the one now in "config.h". * autogen.sh: Add -I gnulib/m4. * src/conf.c, src/sexpr.c: Don't define _GNU_SOURCE. Instead, include "config.h". * qemud/qemud.c: Remove definition of _GNU_SOURCE. * src/openvz_driver.c: Likewise. * src/qemu_driver.c: Likewise. * src/remote_internal.c: Likewise. * configure.in: Use AC_CONFIG_AUX_DIR(build-aux), so that a bunch of gettextize-generated files go into build-aux/, rather than in the top-level directory. * .cvsignore: Adjust. * build-aux/.cvsignore: New file. Author: Jim Meyering <meyering@redhat.com>
2007-12-05 21:31:07 +00:00
contents are read as shell variables to configure the bootstrap.
For build prerequisites, environment variables like \$AUTOCONF and \$AMTAR
are honored.
Use gnulib, starting with its physmem and getaddrinfo modules. New files go into these directories: gnulib/lib gnulib/m4 gnulib/tests * bootstrap: A wrapper around gnulib-tool. * configure.in: Invoke gl_EARLY and gl_INIT, being careful to put gl_EARLY before any macro that uses AC_COMPILE_IFELSE. (AC_OUTPUT): Add lib/Makefile and gl-tests/Makefile. Remove m4/Makefile. * Makefile.am (SUBDIRS): Add gnulib/lib and remove m4. Add gnulib/tests early enough that those tests run before any libvirt unit tests. * m4/Makefile.am: Remove file. Not needed. * src/Makefile.am (INCLUDES): Add -I$(top_srcdir)/gnulib/lib -I../gnulib/lib. (LDADDS, libvirt_la_LIBADD): Add ../gnulib/lib/libgnu.la. * src/nodeinfo.c: Include "physmem.h". * qemud/qemud.c, src/remote_internal.c: Include "getaddrinfo.h". (MEMINFO_PATH, linuxNodeInfoMemPopulate): Remove definitions. (virNodeInfoPopulate): Use physmem_total, not linuxNodeInfoMemPopulate. * tests/Makefile.am (INCLUDES): Add -I$(top_srcdir)/gnulib/lib -I../gnulib/lib. (LDADDS): Add ../gnulib/lib/libgnu.la. * qemud/Makefile.am (libvirtd_LDADD): Add ../gnulib/lib/libgnu.la. * tests/nodeinfotest.c (linuxTestCompareFiles): No longer read total memory from a file. Update expected output not to include "Memory: NNNN" * tests/nodeinfodata/linux-nodeinfo-1.txt: * tests/nodeinfodata/linux-nodeinfo-2.txt: * tests/nodeinfodata/linux-nodeinfo-3.txt: * tests/nodeinfodata/linux-nodeinfo-4.txt: * tests/nodeinfodata/linux-nodeinfo-5.txt: * tests/nodeinfodata/linux-nodeinfo-6.txt: * src/test.c [WITH_TEST]: Remove definition of _GNU_SOURCE that would conflict with the one now in "config.h". * autogen.sh: Add -I gnulib/m4. * src/conf.c, src/sexpr.c: Don't define _GNU_SOURCE. Instead, include "config.h". * qemud/qemud.c: Remove definition of _GNU_SOURCE. * src/openvz_driver.c: Likewise. * src/qemu_driver.c: Likewise. * src/remote_internal.c: Likewise. * configure.in: Use AC_CONFIG_AUX_DIR(build-aux), so that a bunch of gettextize-generated files go into build-aux/, rather than in the top-level directory. * .cvsignore: Adjust. * build-aux/.cvsignore: New file. Author: Jim Meyering <meyering@redhat.com>
2007-12-05 21:31:07 +00:00
Running without arguments will suffice in most cases.
EOF
Use gnulib, starting with its physmem and getaddrinfo modules. New files go into these directories: gnulib/lib gnulib/m4 gnulib/tests * bootstrap: A wrapper around gnulib-tool. * configure.in: Invoke gl_EARLY and gl_INIT, being careful to put gl_EARLY before any macro that uses AC_COMPILE_IFELSE. (AC_OUTPUT): Add lib/Makefile and gl-tests/Makefile. Remove m4/Makefile. * Makefile.am (SUBDIRS): Add gnulib/lib and remove m4. Add gnulib/tests early enough that those tests run before any libvirt unit tests. * m4/Makefile.am: Remove file. Not needed. * src/Makefile.am (INCLUDES): Add -I$(top_srcdir)/gnulib/lib -I../gnulib/lib. (LDADDS, libvirt_la_LIBADD): Add ../gnulib/lib/libgnu.la. * src/nodeinfo.c: Include "physmem.h". * qemud/qemud.c, src/remote_internal.c: Include "getaddrinfo.h". (MEMINFO_PATH, linuxNodeInfoMemPopulate): Remove definitions. (virNodeInfoPopulate): Use physmem_total, not linuxNodeInfoMemPopulate. * tests/Makefile.am (INCLUDES): Add -I$(top_srcdir)/gnulib/lib -I../gnulib/lib. (LDADDS): Add ../gnulib/lib/libgnu.la. * qemud/Makefile.am (libvirtd_LDADD): Add ../gnulib/lib/libgnu.la. * tests/nodeinfotest.c (linuxTestCompareFiles): No longer read total memory from a file. Update expected output not to include "Memory: NNNN" * tests/nodeinfodata/linux-nodeinfo-1.txt: * tests/nodeinfodata/linux-nodeinfo-2.txt: * tests/nodeinfodata/linux-nodeinfo-3.txt: * tests/nodeinfodata/linux-nodeinfo-4.txt: * tests/nodeinfodata/linux-nodeinfo-5.txt: * tests/nodeinfodata/linux-nodeinfo-6.txt: * src/test.c [WITH_TEST]: Remove definition of _GNU_SOURCE that would conflict with the one now in "config.h". * autogen.sh: Add -I gnulib/m4. * src/conf.c, src/sexpr.c: Don't define _GNU_SOURCE. Instead, include "config.h". * qemud/qemud.c: Remove definition of _GNU_SOURCE. * src/openvz_driver.c: Likewise. * src/qemu_driver.c: Likewise. * src/remote_internal.c: Likewise. * configure.in: Use AC_CONFIG_AUX_DIR(build-aux), so that a bunch of gettextize-generated files go into build-aux/, rather than in the top-level directory. * .cvsignore: Adjust. * build-aux/.cvsignore: New file. Author: Jim Meyering <meyering@redhat.com>
2007-12-05 21:31:07 +00:00
}
# Configuration.
# Name of the Makefile.am
gnulib_mk=gnulib.mk
# List of gnulib modules needed.
gnulib_modules=
# Any gnulib files needed that are not in modules.
gnulib_files=
# A function to be called to edit gnulib.mk right after it's created.
# Override it via your own definition in bootstrap.conf.
gnulib_mk_hook() { :; }
# A function to be called after everything else in this script.
# Override it via your own definition in bootstrap.conf.
bootstrap_epilogue() { :; }
# The command to download all .po files for a specified domain into
# a specified directory. Fill in the first %s is the domain name, and
# the second with the destination directory. Use rsync's -L and -r
# options because the latest/%s directory and the .po files within are
# all symlinks.
po_download_command_format=\
"rsync --delete --exclude '*.s1' -Lrtvz \
'translationproject.org::tp/latest/%s/' '%s'"
extract_package_name='
/^AC_INIT(/{
/.*,.*,.*, */{
s///
s/[][]//g
s/)$//
p
q
}
s/AC_INIT(\[*//
s/]*,.*//
s/^GNU //
y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/
s/[^A-Za-z0-9_]/-/g
p
}
'
package=`sed -n "$extract_package_name" configure.ac` || exit
gnulib_name=lib$package
build_aux=build-aux
source_base=lib
m4_base=m4
doc_base=doc
tests_base=tests
# Extra files from gnulib, which override files from other sources.
gnulib_extra_files="
$build_aux/install-sh
$build_aux/missing
$build_aux/mdate-sh
$build_aux/texinfo.tex
$build_aux/depcomp
$build_aux/config.guess
$build_aux/config.sub
doc/INSTALL
"
# Additional gnulib-tool options to use. Use "\newline" to break lines.
gnulib_tool_option_extras=
# Other locale categories that need message catalogs.
EXTRA_LOCALE_CATEGORIES=
# Additional xgettext options to use. Use "\\\newline" to break lines.
XGETTEXT_OPTIONS='\\\
--flag=_:1:pass-c-format\\\
--flag=N_:1:pass-c-format\\\
--flag=error:3:c-format --flag=error_at_line:5:c-format\\\
'
# Package bug report address and copyright holder for gettext files
COPYRIGHT_HOLDER='Free Software Foundation, Inc.'
MSGID_BUGS_ADDRESS=bug-$package@gnu.org
# Files we don't want to import.
excluded_files=
# File that should exist in the top directory of a checked out hierarchy,
# but not in a distribution tarball.
checkout_only_file=README-hacking
# Whether to use copies instead of symlinks.
copy=false
# Set this to '.cvsignore .gitignore' in bootstrap.conf if you want
# those files to be generated in directories like lib/, m4/, and po/.
# Or set it to 'auto' to make this script select which to use based
# on which version control system (if any) is used in the source directory.
vc_ignore=auto
# Set this to true in bootstrap.conf to enable --bootstrap-sync by
# default.
bootstrap_sync=false
# Use git to update gnulib sources
use_git=true
# find_tool ENVVAR NAMES...
# -------------------------
# Search for a required program. Use the value of ENVVAR, if set,
# otherwise find the first of the NAMES that can be run (i.e.,
# supports --version). If found, set ENVVAR to the program name,
# die otherwise.
find_tool ()
{
find_tool_envvar=$1
shift
find_tool_names=$@
eval "find_tool_res=\$$find_tool_envvar"
if test x"$find_tool_res" = x; then
for i
do
if ($i --version </dev/null) >/dev/null 2>&1; then
find_tool_res=$i
break
fi
done
else
find_tool_error_prefix="\$$find_tool_envvar: "
fi
if test x"$find_tool_res" = x; then
echo >&2 "$me: one of these is required: $find_tool_names"
exit 1
fi
($find_tool_res --version </dev/null) >/dev/null 2>&1 || {
echo >&2 "$me: ${find_tool_error_prefix}cannot run $find_tool_res --version"
exit 1
}
eval "$find_tool_envvar=\$find_tool_res"
eval "export $find_tool_envvar"
}
# Find sha1sum, named gsha1sum on MacPorts, and shasum on MacOS 10.6.
find_tool SHA1SUM sha1sum gsha1sum shasum
# Override the default configuration, if necessary.
# Make sure that bootstrap.conf is sourced from the current directory
# if we were invoked as "sh bootstrap".
case "$0" in
*/*) test -r "$0.conf" && . "$0.conf" ;;
*) test -r "$0.conf" && . ./"$0.conf" ;;
esac
if test "$vc_ignore" = auto; then
vc_ignore=
test -d .git && vc_ignore=.gitignore
test -d CVS && vc_ignore="$vc_ignore .cvsignore"
fi
# Translate configuration into internal form.
# Parse options.
Use gnulib, starting with its physmem and getaddrinfo modules. New files go into these directories: gnulib/lib gnulib/m4 gnulib/tests * bootstrap: A wrapper around gnulib-tool. * configure.in: Invoke gl_EARLY and gl_INIT, being careful to put gl_EARLY before any macro that uses AC_COMPILE_IFELSE. (AC_OUTPUT): Add lib/Makefile and gl-tests/Makefile. Remove m4/Makefile. * Makefile.am (SUBDIRS): Add gnulib/lib and remove m4. Add gnulib/tests early enough that those tests run before any libvirt unit tests. * m4/Makefile.am: Remove file. Not needed. * src/Makefile.am (INCLUDES): Add -I$(top_srcdir)/gnulib/lib -I../gnulib/lib. (LDADDS, libvirt_la_LIBADD): Add ../gnulib/lib/libgnu.la. * src/nodeinfo.c: Include "physmem.h". * qemud/qemud.c, src/remote_internal.c: Include "getaddrinfo.h". (MEMINFO_PATH, linuxNodeInfoMemPopulate): Remove definitions. (virNodeInfoPopulate): Use physmem_total, not linuxNodeInfoMemPopulate. * tests/Makefile.am (INCLUDES): Add -I$(top_srcdir)/gnulib/lib -I../gnulib/lib. (LDADDS): Add ../gnulib/lib/libgnu.la. * qemud/Makefile.am (libvirtd_LDADD): Add ../gnulib/lib/libgnu.la. * tests/nodeinfotest.c (linuxTestCompareFiles): No longer read total memory from a file. Update expected output not to include "Memory: NNNN" * tests/nodeinfodata/linux-nodeinfo-1.txt: * tests/nodeinfodata/linux-nodeinfo-2.txt: * tests/nodeinfodata/linux-nodeinfo-3.txt: * tests/nodeinfodata/linux-nodeinfo-4.txt: * tests/nodeinfodata/linux-nodeinfo-5.txt: * tests/nodeinfodata/linux-nodeinfo-6.txt: * src/test.c [WITH_TEST]: Remove definition of _GNU_SOURCE that would conflict with the one now in "config.h". * autogen.sh: Add -I gnulib/m4. * src/conf.c, src/sexpr.c: Don't define _GNU_SOURCE. Instead, include "config.h". * qemud/qemud.c: Remove definition of _GNU_SOURCE. * src/openvz_driver.c: Likewise. * src/qemu_driver.c: Likewise. * src/remote_internal.c: Likewise. * configure.in: Use AC_CONFIG_AUX_DIR(build-aux), so that a bunch of gettextize-generated files go into build-aux/, rather than in the top-level directory. * .cvsignore: Adjust. * build-aux/.cvsignore: New file. Author: Jim Meyering <meyering@redhat.com>
2007-12-05 21:31:07 +00:00
for option
do
case $option in
--help)
usage
exit;;
--gnulib-srcdir=*)
GNULIB_SRCDIR=`expr "X$option" : 'X--gnulib-srcdir=\(.*\)'`;;
--skip-po)
SKIP_PO=t;;
--force)
checkout_only_file=;;
--copy)
copy=true;;
--bootstrap-sync)
bootstrap_sync=true;;
--no-bootstrap-sync)
bootstrap_sync=false;;
--no-git)
use_git=false;;
Use gnulib, starting with its physmem and getaddrinfo modules. New files go into these directories: gnulib/lib gnulib/m4 gnulib/tests * bootstrap: A wrapper around gnulib-tool. * configure.in: Invoke gl_EARLY and gl_INIT, being careful to put gl_EARLY before any macro that uses AC_COMPILE_IFELSE. (AC_OUTPUT): Add lib/Makefile and gl-tests/Makefile. Remove m4/Makefile. * Makefile.am (SUBDIRS): Add gnulib/lib and remove m4. Add gnulib/tests early enough that those tests run before any libvirt unit tests. * m4/Makefile.am: Remove file. Not needed. * src/Makefile.am (INCLUDES): Add -I$(top_srcdir)/gnulib/lib -I../gnulib/lib. (LDADDS, libvirt_la_LIBADD): Add ../gnulib/lib/libgnu.la. * src/nodeinfo.c: Include "physmem.h". * qemud/qemud.c, src/remote_internal.c: Include "getaddrinfo.h". (MEMINFO_PATH, linuxNodeInfoMemPopulate): Remove definitions. (virNodeInfoPopulate): Use physmem_total, not linuxNodeInfoMemPopulate. * tests/Makefile.am (INCLUDES): Add -I$(top_srcdir)/gnulib/lib -I../gnulib/lib. (LDADDS): Add ../gnulib/lib/libgnu.la. * qemud/Makefile.am (libvirtd_LDADD): Add ../gnulib/lib/libgnu.la. * tests/nodeinfotest.c (linuxTestCompareFiles): No longer read total memory from a file. Update expected output not to include "Memory: NNNN" * tests/nodeinfodata/linux-nodeinfo-1.txt: * tests/nodeinfodata/linux-nodeinfo-2.txt: * tests/nodeinfodata/linux-nodeinfo-3.txt: * tests/nodeinfodata/linux-nodeinfo-4.txt: * tests/nodeinfodata/linux-nodeinfo-5.txt: * tests/nodeinfodata/linux-nodeinfo-6.txt: * src/test.c [WITH_TEST]: Remove definition of _GNU_SOURCE that would conflict with the one now in "config.h". * autogen.sh: Add -I gnulib/m4. * src/conf.c, src/sexpr.c: Don't define _GNU_SOURCE. Instead, include "config.h". * qemud/qemud.c: Remove definition of _GNU_SOURCE. * src/openvz_driver.c: Likewise. * src/qemu_driver.c: Likewise. * src/remote_internal.c: Likewise. * configure.in: Use AC_CONFIG_AUX_DIR(build-aux), so that a bunch of gettextize-generated files go into build-aux/, rather than in the top-level directory. * .cvsignore: Adjust. * build-aux/.cvsignore: New file. Author: Jim Meyering <meyering@redhat.com>
2007-12-05 21:31:07 +00:00
*)
echo >&2 "$0: $option: unknown option"
exit 1;;
esac
done
if $use_git || test -d "$GNULIB_SRCDIR"; then
:
else
echo "$0: Error: --no-git requires --gnulib-srcdir" >&2
exit 1
fi
if test -n "$checkout_only_file" && test ! -r "$checkout_only_file"; then
echo "$0: Bootstrapping from a non-checked-out distribution is risky." >&2
exit 1
fi
# If $STR is not already on a line by itself in $FILE, insert it,
# sorting the new contents of the file and replacing $FILE with the result.
insert_sorted_if_absent() {
file=$1
str=$2
test -f $file || touch $file
echo "$str" | sort -u - $file | cmp - $file > /dev/null \
|| echo "$str" | sort -u - $file -o $file \
|| exit 1
}
# Adjust $PATTERN for $VC_IGNORE_FILE and insert it with
# insert_sorted_if_absent.
insert_vc_ignore() {
vc_ignore_file="$1"
pattern="$2"
case $vc_ignore_file in
*.gitignore)
# A .gitignore entry that does not start with `/' applies
# recursively to subdirectories, so prepend `/' to every
# .gitignore entry.
pattern=`echo "$pattern" | sed s,^,/,`;;
esac
insert_sorted_if_absent "$vc_ignore_file" "$pattern"
}
# Die if there is no AC_CONFIG_AUX_DIR($build_aux) line in configure.ac.
found_aux_dir=no
grep '^[ ]*AC_CONFIG_AUX_DIR(\['"$build_aux"'\])' configure.ac \
>/dev/null && found_aux_dir=yes
grep '^[ ]*AC_CONFIG_AUX_DIR('"$build_aux"')' configure.ac \
>/dev/null && found_aux_dir=yes
if test $found_aux_dir = no; then
echo "$0: expected line not found in configure.ac. Add the following:" >&2
echo " AC_CONFIG_AUX_DIR([$build_aux])" >&2
exit 1
fi
# If $build_aux doesn't exist, create it now, otherwise some bits
# below will malfunction. If creating it, also mark it as ignored.
if test ! -d $build_aux; then
mkdir $build_aux
for dot_ig in x $vc_ignore; do
test $dot_ig = x && continue
insert_vc_ignore $dot_ig $build_aux
done
fi
# Note this deviates from the version comparison in automake
# in that it treats 1.5 < 1.5.0, and treats 1.4.4a < 1.4-p3a
# but this should suffice as we won't be specifying old
# version formats or redundant trailing .0 in bootstrap.conf.
# If we did want full compatibility then we should probably
# use m4_version_compare from autoconf.
sort_ver() { # sort -V is not generally available
ver1="$1"
ver2="$2"
# split on '.' and compare each component
i=1
while : ; do
p1=$(echo "$ver1" | cut -d. -f$i)
p2=$(echo "$ver2" | cut -d. -f$i)
if [ ! "$p1" ]; then
echo "$1 $2"
break
elif [ ! "$p2" ]; then
echo "$2 $1"
break
elif [ ! "$p1" = "$p2" ]; then
if [ "$p1" -gt "$p2" ] 2>/dev/null; then # numeric comparison
echo "$2 $1"
elif [ "$p2" -gt "$p1" ] 2>/dev/null; then # numeric comparison
echo "$1 $2"
else # numeric, then lexicographic comparison
lp=$(printf "$p1\n$p2\n" | LANG=C sort -n | tail -n1)
if [ "$lp" = "$p2" ]; then
echo "$1 $2"
else
echo "$2 $1"
fi
fi
break
fi
i=$(($i+1))
done
}
get_version() {
app=$1
$app --version >/dev/null 2>&1 || return 1
$app --version 2>&1 |
sed -n '# Move version to start of line.
s/.*[v ]\([0-9]\)/\1/
# Skip lines that do not start with version.
/^[0-9]/!d
# Remove characters after the version.
s/[^.a-z0-9-].*//
# The first component must be digits only.
s/^\([0-9]*\)[a-z-].*/\1/
#the following essentially does s/5.005/5.5/
s/\.0*\([1-9]\)/.\1/g
p
q'
}
check_versions() {
ret=0
while read app req_ver; do
# We only need libtoolize from the libtool package.
if test "$app" = libtool; then
app=libtoolize
fi
# Exempt git if --no-git is in effect.
if test "$app" = git; then
$use_git || continue
fi
# Honor $APP variables ($TAR, $AUTOCONF, etc.)
appvar=`echo $app | tr '[a-z]-' '[A-Z]_'`
test "$appvar" = TAR && appvar=AMTAR
eval "app=\${$appvar-$app}"
inst_ver=$(get_version $app)
if [ ! "$inst_ver" ]; then
echo "$me: Error: '$app' not found" >&2
ret=1
elif [ ! "$req_ver" = "-" ]; then
latest_ver=$(sort_ver $req_ver $inst_ver | cut -d' ' -f2)
if [ ! "$latest_ver" = "$inst_ver" ]; then
echo "$me: Error: '$app' version == $inst_ver is too old" >&2
echo " '$app' version >= $req_ver is required" >&2
ret=1
fi
fi
done
return $ret
}
print_versions() {
echo "Program Min_version"
echo "----------------------"
printf %s "$buildreq"
echo "----------------------"
# can't depend on column -t
}
use_libtool=0
# We'd like to use grep -E, to see if any of LT_INIT,
# AC_PROG_LIBTOOL, AM_PROG_LIBTOOL is used in configure.ac,
# but that's not portable enough (e.g., for Solaris).
grep '^[ ]*A[CM]_PROG_LIBTOOL' configure.ac >/dev/null \
&& use_libtool=1
grep '^[ ]*LT_INIT' configure.ac >/dev/null \
&& use_libtool=1
if test $use_libtool = 1; then
find_tool LIBTOOLIZE glibtoolize libtoolize
fi
if ! printf "$buildreq" | check_versions; then
echo >&2
if test -f README-prereq; then
echo "$0: See README-prereq for how to get the prerequisite programs" >&2
else
echo "$0: Please install the prerequisite programs" >&2
fi
exit 1
fi
echo "$0: Bootstrapping from checked-out $package sources..."
# See if we can use gnulib's git-merge-changelog merge driver.
if test -d .git && (git --version) >/dev/null 2>/dev/null ; then
if git config merge.merge-changelog.driver >/dev/null ; then
:
elif (git-merge-changelog --version) >/dev/null 2>/dev/null ; then
echo "$0: initializing git-merge-changelog driver"
git config merge.merge-changelog.name 'GNU-style ChangeLog merge driver'
git config merge.merge-changelog.driver 'git-merge-changelog %O %A %B'
else
echo "$0: consider installing git-merge-changelog from gnulib"
fi
fi
cleanup_gnulib() {
status=$?
rm -fr "$gnulib_path"
exit $status
}
git_modules_config () {
test -f .gitmodules && git config --file .gitmodules "$@"
}
gnulib_path=`git_modules_config submodule.gnulib.path`
test -z "$gnulib_path" && gnulib_path=gnulib
# Get gnulib files.
Use gnulib, starting with its physmem and getaddrinfo modules. New files go into these directories: gnulib/lib gnulib/m4 gnulib/tests * bootstrap: A wrapper around gnulib-tool. * configure.in: Invoke gl_EARLY and gl_INIT, being careful to put gl_EARLY before any macro that uses AC_COMPILE_IFELSE. (AC_OUTPUT): Add lib/Makefile and gl-tests/Makefile. Remove m4/Makefile. * Makefile.am (SUBDIRS): Add gnulib/lib and remove m4. Add gnulib/tests early enough that those tests run before any libvirt unit tests. * m4/Makefile.am: Remove file. Not needed. * src/Makefile.am (INCLUDES): Add -I$(top_srcdir)/gnulib/lib -I../gnulib/lib. (LDADDS, libvirt_la_LIBADD): Add ../gnulib/lib/libgnu.la. * src/nodeinfo.c: Include "physmem.h". * qemud/qemud.c, src/remote_internal.c: Include "getaddrinfo.h". (MEMINFO_PATH, linuxNodeInfoMemPopulate): Remove definitions. (virNodeInfoPopulate): Use physmem_total, not linuxNodeInfoMemPopulate. * tests/Makefile.am (INCLUDES): Add -I$(top_srcdir)/gnulib/lib -I../gnulib/lib. (LDADDS): Add ../gnulib/lib/libgnu.la. * qemud/Makefile.am (libvirtd_LDADD): Add ../gnulib/lib/libgnu.la. * tests/nodeinfotest.c (linuxTestCompareFiles): No longer read total memory from a file. Update expected output not to include "Memory: NNNN" * tests/nodeinfodata/linux-nodeinfo-1.txt: * tests/nodeinfodata/linux-nodeinfo-2.txt: * tests/nodeinfodata/linux-nodeinfo-3.txt: * tests/nodeinfodata/linux-nodeinfo-4.txt: * tests/nodeinfodata/linux-nodeinfo-5.txt: * tests/nodeinfodata/linux-nodeinfo-6.txt: * src/test.c [WITH_TEST]: Remove definition of _GNU_SOURCE that would conflict with the one now in "config.h". * autogen.sh: Add -I gnulib/m4. * src/conf.c, src/sexpr.c: Don't define _GNU_SOURCE. Instead, include "config.h". * qemud/qemud.c: Remove definition of _GNU_SOURCE. * src/openvz_driver.c: Likewise. * src/qemu_driver.c: Likewise. * src/remote_internal.c: Likewise. * configure.in: Use AC_CONFIG_AUX_DIR(build-aux), so that a bunch of gettextize-generated files go into build-aux/, rather than in the top-level directory. * .cvsignore: Adjust. * build-aux/.cvsignore: New file. Author: Jim Meyering <meyering@redhat.com>
2007-12-05 21:31:07 +00:00
case ${GNULIB_SRCDIR--} in
-)
if git_modules_config submodule.gnulib.url >/dev/null; then
echo "$0: getting gnulib files..."
git submodule init || exit $?
git submodule update || exit $?
elif [ ! -d "$gnulib_path" ]; then
echo "$0: getting gnulib files..."
trap cleanup_gnulib 1 2 13 15
shallow=
git clone -h 2>&1 | grep -- --depth > /dev/null && shallow='--depth 2'
git clone $shallow git://git.sv.gnu.org/gnulib "$gnulib_path" ||
cleanup_gnulib
trap - 1 2 13 15
fi
GNULIB_SRCDIR=$gnulib_path
;;
*)
# Use GNULIB_SRCDIR as a reference.
if test -d "$GNULIB_SRCDIR"/.git && \
git_modules_config submodule.gnulib.url >/dev/null; then
Use gnulib, starting with its physmem and getaddrinfo modules. New files go into these directories: gnulib/lib gnulib/m4 gnulib/tests * bootstrap: A wrapper around gnulib-tool. * configure.in: Invoke gl_EARLY and gl_INIT, being careful to put gl_EARLY before any macro that uses AC_COMPILE_IFELSE. (AC_OUTPUT): Add lib/Makefile and gl-tests/Makefile. Remove m4/Makefile. * Makefile.am (SUBDIRS): Add gnulib/lib and remove m4. Add gnulib/tests early enough that those tests run before any libvirt unit tests. * m4/Makefile.am: Remove file. Not needed. * src/Makefile.am (INCLUDES): Add -I$(top_srcdir)/gnulib/lib -I../gnulib/lib. (LDADDS, libvirt_la_LIBADD): Add ../gnulib/lib/libgnu.la. * src/nodeinfo.c: Include "physmem.h". * qemud/qemud.c, src/remote_internal.c: Include "getaddrinfo.h". (MEMINFO_PATH, linuxNodeInfoMemPopulate): Remove definitions. (virNodeInfoPopulate): Use physmem_total, not linuxNodeInfoMemPopulate. * tests/Makefile.am (INCLUDES): Add -I$(top_srcdir)/gnulib/lib -I../gnulib/lib. (LDADDS): Add ../gnulib/lib/libgnu.la. * qemud/Makefile.am (libvirtd_LDADD): Add ../gnulib/lib/libgnu.la. * tests/nodeinfotest.c (linuxTestCompareFiles): No longer read total memory from a file. Update expected output not to include "Memory: NNNN" * tests/nodeinfodata/linux-nodeinfo-1.txt: * tests/nodeinfodata/linux-nodeinfo-2.txt: * tests/nodeinfodata/linux-nodeinfo-3.txt: * tests/nodeinfodata/linux-nodeinfo-4.txt: * tests/nodeinfodata/linux-nodeinfo-5.txt: * tests/nodeinfodata/linux-nodeinfo-6.txt: * src/test.c [WITH_TEST]: Remove definition of _GNU_SOURCE that would conflict with the one now in "config.h". * autogen.sh: Add -I gnulib/m4. * src/conf.c, src/sexpr.c: Don't define _GNU_SOURCE. Instead, include "config.h". * qemud/qemud.c: Remove definition of _GNU_SOURCE. * src/openvz_driver.c: Likewise. * src/qemu_driver.c: Likewise. * src/remote_internal.c: Likewise. * configure.in: Use AC_CONFIG_AUX_DIR(build-aux), so that a bunch of gettextize-generated files go into build-aux/, rather than in the top-level directory. * .cvsignore: Adjust. * build-aux/.cvsignore: New file. Author: Jim Meyering <meyering@redhat.com>
2007-12-05 21:31:07 +00:00
echo "$0: getting gnulib files..."
if git submodule -h|grep -- --reference > /dev/null; then
# Prefer the one-liner available in git 1.6.4 or newer.
git submodule update --init --reference "$GNULIB_SRCDIR" \
"$gnulib_path" || exit $?
else
# This fallback allows at least git 1.5.5.
if test -f "$gnulib_path"/gnulib-tool; then
# Since file already exists, assume submodule init already complete.
git submodule update || exit $?
else
# Older git can't clone into an empty directory.
rmdir "$gnulib_path" 2>/dev/null
git clone --reference "$GNULIB_SRCDIR" \
"$(git_modules_config submodule.gnulib.url)" "$gnulib_path" \
&& git submodule init && git submodule update \
|| exit $?
fi
fi
GNULIB_SRCDIR=$gnulib_path
Use gnulib, starting with its physmem and getaddrinfo modules. New files go into these directories: gnulib/lib gnulib/m4 gnulib/tests * bootstrap: A wrapper around gnulib-tool. * configure.in: Invoke gl_EARLY and gl_INIT, being careful to put gl_EARLY before any macro that uses AC_COMPILE_IFELSE. (AC_OUTPUT): Add lib/Makefile and gl-tests/Makefile. Remove m4/Makefile. * Makefile.am (SUBDIRS): Add gnulib/lib and remove m4. Add gnulib/tests early enough that those tests run before any libvirt unit tests. * m4/Makefile.am: Remove file. Not needed. * src/Makefile.am (INCLUDES): Add -I$(top_srcdir)/gnulib/lib -I../gnulib/lib. (LDADDS, libvirt_la_LIBADD): Add ../gnulib/lib/libgnu.la. * src/nodeinfo.c: Include "physmem.h". * qemud/qemud.c, src/remote_internal.c: Include "getaddrinfo.h". (MEMINFO_PATH, linuxNodeInfoMemPopulate): Remove definitions. (virNodeInfoPopulate): Use physmem_total, not linuxNodeInfoMemPopulate. * tests/Makefile.am (INCLUDES): Add -I$(top_srcdir)/gnulib/lib -I../gnulib/lib. (LDADDS): Add ../gnulib/lib/libgnu.la. * qemud/Makefile.am (libvirtd_LDADD): Add ../gnulib/lib/libgnu.la. * tests/nodeinfotest.c (linuxTestCompareFiles): No longer read total memory from a file. Update expected output not to include "Memory: NNNN" * tests/nodeinfodata/linux-nodeinfo-1.txt: * tests/nodeinfodata/linux-nodeinfo-2.txt: * tests/nodeinfodata/linux-nodeinfo-3.txt: * tests/nodeinfodata/linux-nodeinfo-4.txt: * tests/nodeinfodata/linux-nodeinfo-5.txt: * tests/nodeinfodata/linux-nodeinfo-6.txt: * src/test.c [WITH_TEST]: Remove definition of _GNU_SOURCE that would conflict with the one now in "config.h". * autogen.sh: Add -I gnulib/m4. * src/conf.c, src/sexpr.c: Don't define _GNU_SOURCE. Instead, include "config.h". * qemud/qemud.c: Remove definition of _GNU_SOURCE. * src/openvz_driver.c: Likewise. * src/qemu_driver.c: Likewise. * src/remote_internal.c: Likewise. * configure.in: Use AC_CONFIG_AUX_DIR(build-aux), so that a bunch of gettextize-generated files go into build-aux/, rather than in the top-level directory. * .cvsignore: Adjust. * build-aux/.cvsignore: New file. Author: Jim Meyering <meyering@redhat.com>
2007-12-05 21:31:07 +00:00
fi
;;
Use gnulib, starting with its physmem and getaddrinfo modules. New files go into these directories: gnulib/lib gnulib/m4 gnulib/tests * bootstrap: A wrapper around gnulib-tool. * configure.in: Invoke gl_EARLY and gl_INIT, being careful to put gl_EARLY before any macro that uses AC_COMPILE_IFELSE. (AC_OUTPUT): Add lib/Makefile and gl-tests/Makefile. Remove m4/Makefile. * Makefile.am (SUBDIRS): Add gnulib/lib and remove m4. Add gnulib/tests early enough that those tests run before any libvirt unit tests. * m4/Makefile.am: Remove file. Not needed. * src/Makefile.am (INCLUDES): Add -I$(top_srcdir)/gnulib/lib -I../gnulib/lib. (LDADDS, libvirt_la_LIBADD): Add ../gnulib/lib/libgnu.la. * src/nodeinfo.c: Include "physmem.h". * qemud/qemud.c, src/remote_internal.c: Include "getaddrinfo.h". (MEMINFO_PATH, linuxNodeInfoMemPopulate): Remove definitions. (virNodeInfoPopulate): Use physmem_total, not linuxNodeInfoMemPopulate. * tests/Makefile.am (INCLUDES): Add -I$(top_srcdir)/gnulib/lib -I../gnulib/lib. (LDADDS): Add ../gnulib/lib/libgnu.la. * qemud/Makefile.am (libvirtd_LDADD): Add ../gnulib/lib/libgnu.la. * tests/nodeinfotest.c (linuxTestCompareFiles): No longer read total memory from a file. Update expected output not to include "Memory: NNNN" * tests/nodeinfodata/linux-nodeinfo-1.txt: * tests/nodeinfodata/linux-nodeinfo-2.txt: * tests/nodeinfodata/linux-nodeinfo-3.txt: * tests/nodeinfodata/linux-nodeinfo-4.txt: * tests/nodeinfodata/linux-nodeinfo-5.txt: * tests/nodeinfodata/linux-nodeinfo-6.txt: * src/test.c [WITH_TEST]: Remove definition of _GNU_SOURCE that would conflict with the one now in "config.h". * autogen.sh: Add -I gnulib/m4. * src/conf.c, src/sexpr.c: Don't define _GNU_SOURCE. Instead, include "config.h". * qemud/qemud.c: Remove definition of _GNU_SOURCE. * src/openvz_driver.c: Likewise. * src/qemu_driver.c: Likewise. * src/remote_internal.c: Likewise. * configure.in: Use AC_CONFIG_AUX_DIR(build-aux), so that a bunch of gettextize-generated files go into build-aux/, rather than in the top-level directory. * .cvsignore: Adjust. * build-aux/.cvsignore: New file. Author: Jim Meyering <meyering@redhat.com>
2007-12-05 21:31:07 +00:00
esac
if $bootstrap_sync; then
cmp -s "$0" "$GNULIB_SRCDIR/build-aux/bootstrap" || {
echo "$0: updating bootstrap and restarting..."
exec sh -c \
'cp "$1" "$2" && shift && exec "${CONFIG_SHELL-/bin/sh}" "$@"' \
-- "$GNULIB_SRCDIR/build-aux/bootstrap" \
"$0" "$@" --no-bootstrap-sync
}
fi
Use gnulib, starting with its physmem and getaddrinfo modules. New files go into these directories: gnulib/lib gnulib/m4 gnulib/tests * bootstrap: A wrapper around gnulib-tool. * configure.in: Invoke gl_EARLY and gl_INIT, being careful to put gl_EARLY before any macro that uses AC_COMPILE_IFELSE. (AC_OUTPUT): Add lib/Makefile and gl-tests/Makefile. Remove m4/Makefile. * Makefile.am (SUBDIRS): Add gnulib/lib and remove m4. Add gnulib/tests early enough that those tests run before any libvirt unit tests. * m4/Makefile.am: Remove file. Not needed. * src/Makefile.am (INCLUDES): Add -I$(top_srcdir)/gnulib/lib -I../gnulib/lib. (LDADDS, libvirt_la_LIBADD): Add ../gnulib/lib/libgnu.la. * src/nodeinfo.c: Include "physmem.h". * qemud/qemud.c, src/remote_internal.c: Include "getaddrinfo.h". (MEMINFO_PATH, linuxNodeInfoMemPopulate): Remove definitions. (virNodeInfoPopulate): Use physmem_total, not linuxNodeInfoMemPopulate. * tests/Makefile.am (INCLUDES): Add -I$(top_srcdir)/gnulib/lib -I../gnulib/lib. (LDADDS): Add ../gnulib/lib/libgnu.la. * qemud/Makefile.am (libvirtd_LDADD): Add ../gnulib/lib/libgnu.la. * tests/nodeinfotest.c (linuxTestCompareFiles): No longer read total memory from a file. Update expected output not to include "Memory: NNNN" * tests/nodeinfodata/linux-nodeinfo-1.txt: * tests/nodeinfodata/linux-nodeinfo-2.txt: * tests/nodeinfodata/linux-nodeinfo-3.txt: * tests/nodeinfodata/linux-nodeinfo-4.txt: * tests/nodeinfodata/linux-nodeinfo-5.txt: * tests/nodeinfodata/linux-nodeinfo-6.txt: * src/test.c [WITH_TEST]: Remove definition of _GNU_SOURCE that would conflict with the one now in "config.h". * autogen.sh: Add -I gnulib/m4. * src/conf.c, src/sexpr.c: Don't define _GNU_SOURCE. Instead, include "config.h". * qemud/qemud.c: Remove definition of _GNU_SOURCE. * src/openvz_driver.c: Likewise. * src/qemu_driver.c: Likewise. * src/remote_internal.c: Likewise. * configure.in: Use AC_CONFIG_AUX_DIR(build-aux), so that a bunch of gettextize-generated files go into build-aux/, rather than in the top-level directory. * .cvsignore: Adjust. * build-aux/.cvsignore: New file. Author: Jim Meyering <meyering@redhat.com>
2007-12-05 21:31:07 +00:00
gnulib_tool=$GNULIB_SRCDIR/gnulib-tool
<$gnulib_tool || exit
# Get translations.
download_po_files() {
subdir=$1
domain=$2
echo "$me: getting translations into $subdir for $domain..."
cmd=`printf "$po_download_command_format" "$domain" "$subdir"`
eval "$cmd"
}
# Mirror .po files to $po_dir/.reference and copy only the new
# or modified ones into $po_dir. Also update $po_dir/LINGUAS.
# Note po files that exist locally only are left in $po_dir but will
# not be included in LINGUAS and hence will not be distributed.
update_po_files() {
# Directory containing primary .po files.
# Overwrite them only when we're sure a .po file is new.
po_dir=$1
domain=$2
# Mirror *.po files into this dir.
# Usually contains *.s1 checksum files.
ref_po_dir="$po_dir/.reference"
test -d $ref_po_dir || mkdir $ref_po_dir || return
download_po_files $ref_po_dir $domain \
&& ls "$ref_po_dir"/*.po 2>/dev/null |
sed 's|.*/||; s|\.po$||' > "$po_dir/LINGUAS" || return
langs=`cd $ref_po_dir && echo *.po|sed 's/\.po//g'`
test "$langs" = '*' && langs=x
for po in $langs; do
case $po in x) continue;; esac
new_po="$ref_po_dir/$po.po"
cksum_file="$ref_po_dir/$po.s1"
if ! test -f "$cksum_file" ||
! test -f "$po_dir/$po.po" ||
! $SHA1SUM -c --status "$cksum_file" \
< "$new_po" > /dev/null; then
echo "$me: updated $po_dir/$po.po..."
cp "$new_po" "$po_dir/$po.po" \
&& $SHA1SUM < "$new_po" > "$cksum_file"
fi
done
}
case $SKIP_PO in
'')
if test -d po; then
update_po_files po $package || exit
fi
if test -d runtime-po; then
update_po_files runtime-po $package-runtime || exit
fi;;
esac
symlink_to_dir()
{
src=$1/$2
dst=${3-$2}
test -f "$src" && {
# If the destination directory doesn't exist, create it.
# This is required at least for "lib/uniwidth/cjk.h".
dst_dir=`dirname "$dst"`
if ! test -d "$dst_dir"; then
mkdir -p "$dst_dir"
# If we've just created a directory like lib/uniwidth,
# tell version control system(s) it's ignorable.
# FIXME: for now, this does only one level
parent=`dirname "$dst_dir"`
for dot_ig in x $vc_ignore; do
test $dot_ig = x && continue
ig=$parent/$dot_ig
insert_vc_ignore $ig `echo "$dst_dir"|sed 's,.*/,,'`
done
fi
if $copy; then
{
test ! -h "$dst" || {
echo "$me: rm -f $dst" &&
rm -f "$dst"
}
} &&
test -f "$dst" &&
cmp -s "$src" "$dst" || {
echo "$me: cp -fp $src $dst" &&
cp -fp "$src" "$dst"
}
else
test -h "$dst" &&
src_ls=`ls -diL "$src" 2>/dev/null` && set $src_ls && src_i=$1 &&
dst_ls=`ls -diL "$dst" 2>/dev/null` && set $dst_ls && dst_i=$1 &&
test "$src_i" = "$dst_i" || {
dot_dots=
case $src in
/*) ;;
*)
case /$dst/ in
*//* | */../* | */./* | /*/*/*/*/*/)
echo >&2 "$me: invalid symlink calculation: $src -> $dst"
exit 1;;
/*/*/*/*/) dot_dots=../../../;;
/*/*/*/) dot_dots=../../;;
/*/*/) dot_dots=../;;
esac;;
esac
echo "$me: ln -fs $dot_dots$src $dst" &&
ln -fs "$dot_dots$src" "$dst"
}
fi
}
}
cp_mark_as_generated()
{
cp_src=$1
cp_dst=$2
if cmp -s "$cp_src" "$GNULIB_SRCDIR/$cp_dst"; then
symlink_to_dir "$GNULIB_SRCDIR" "$cp_dst"
elif cmp -s "$cp_src" "$local_gl_dir/$cp_dst"; then
symlink_to_dir $local_gl_dir "$cp_dst"
else
case $cp_dst in
*.[ch]) c1='/* '; c2=' */';;
*.texi) c1='@c '; c2= ;;
*.m4|*/Make*|Make*) c1='# ' ; c2= ;;
*) c1= ; c2= ;;
esac
# If the destination directory doesn't exist, create it.
# This is required at least for "lib/uniwidth/cjk.h".
dst_dir=`dirname "$cp_dst"`
test -d "$dst_dir" || mkdir -p "$dst_dir"
if test -z "$c1"; then
cmp -s "$cp_src" "$cp_dst" || {
# Copy the file first to get proper permissions if it
# doesn't already exist. Then overwrite the copy.
echo "$me: cp -f $cp_src $cp_dst" &&
rm -f "$cp_dst" &&
cp "$cp_src" "$cp_dst-t" &&
sed "s!$bt_regex/!!g" "$cp_src" > "$cp_dst-t" &&
mv -f "$cp_dst-t" "$cp_dst"
}
else
# Copy the file first to get proper permissions if it
# doesn't already exist. Then overwrite the copy.
cp "$cp_src" "$cp_dst-t" &&
(
echo "$c1-*- buffer-read-only: t -*- vi: set ro:$c2" &&
echo "${c1}DO NOT EDIT! GENERATED AUTOMATICALLY!$c2" &&
sed "s!$bt_regex/!!g" "$cp_src"
) > $cp_dst-t &&
if cmp -s "$cp_dst-t" "$cp_dst"; then
rm -f "$cp_dst-t"
else
echo "$me: cp $cp_src $cp_dst # with edits" &&
mv -f "$cp_dst-t" "$cp_dst"
fi
fi
fi
}
version_controlled_file() {
dir=$1
file=$2
found=no
if test -d CVS; then
grep -F "/$file/" $dir/CVS/Entries 2>/dev/null |
grep '^/[^/]*/[0-9]' > /dev/null && found=yes
elif test -d .git; then
git rm -n "$dir/$file" > /dev/null 2>&1 && found=yes
elif test -d .svn; then
svn log -r HEAD "$dir/$file" > /dev/null 2>&1 && found=yes
else
echo "$me: no version control for $dir/$file?" >&2
fi
test $found = yes
}
slurp() {
for dir in . `(cd $1 && find * -type d -print)`; do
copied=
sep=
for file in `ls -a $1/$dir`; do
case $file in
.|..) continue;;
# FIXME: should all file names starting with "." be ignored?
.*) continue;;
esac
test -d $1/$dir/$file && continue
for excluded_file in $excluded_files; do
test "$dir/$file" = "$excluded_file" && continue 2
done
if test $file = Makefile.am && test "X$gnulib_mk" != XMakefile.am; then
copied=$copied${sep}$gnulib_mk; sep=$nl
remove_intl='/^[^#].*\/intl/s/^/#/;'"s!$bt_regex/!!g"
sed "$remove_intl" $1/$dir/$file |
cmp - $dir/$gnulib_mk > /dev/null || {
echo "$me: Copying $1/$dir/$file to $dir/$gnulib_mk ..." &&
rm -f $dir/$gnulib_mk &&
sed "$remove_intl" $1/$dir/$file >$dir/$gnulib_mk &&
gnulib_mk_hook $dir/$gnulib_mk
}
elif { test "${2+set}" = set && test -r $2/$dir/$file; } ||
version_controlled_file $dir $file; then
echo "$me: $dir/$file overrides $1/$dir/$file"
else
copied=$copied$sep$file; sep=$nl
if test $file = gettext.m4; then
echo "$me: patching m4/gettext.m4 to remove need for intl/* ..."
rm -f $dir/$file
sed '
/^AC_DEFUN(\[AM_INTL_SUBDIR],/,/^]/c\
AC_DEFUN([AM_INTL_SUBDIR], [])
/^AC_DEFUN(\[gt_INTL_SUBDIR_CORE],/,/^]/c\
AC_DEFUN([gt_INTL_SUBDIR_CORE], [])
$a\
AC_DEFUN([gl_LOCK_EARLY], [])
' $1/$dir/$file >$dir/$file
else
cp_mark_as_generated $1/$dir/$file $dir/$file
fi
fi || exit
done
for dot_ig in x $vc_ignore; do
test $dot_ig = x && continue
ig=$dir/$dot_ig
if test -n "$copied"; then
insert_vc_ignore $ig "$copied"
# If an ignored file name ends with .in.h, then also add
# the name with just ".h". Many gnulib headers are generated,
# e.g., stdint.in.h -> stdint.h, dirent.in.h ->..., etc.
# Likewise for .gperf -> .h, .y -> .c, and .sin -> .sed
f=`echo "$copied" |
sed '
s/\.in\.h$/.h/
s/\.sin$/.sed/
s/\.y$/.c/
s/\.gperf$/.h/
'
`
insert_vc_ignore $ig "$f"
# For files like sys_stat.in.h and sys_time.in.h, record as
# ignorable the directory we might eventually create: sys/.
f=`echo "$copied"|sed 's/sys_.*\.in\.h$/sys/'`
insert_vc_ignore $ig "$f"
fi
done
done
}
# Create boot temporary directories to import from gnulib and gettext.
rm -fr $bt $bt2 &&
mkdir $bt $bt2 || exit
# Import from gnulib.
gnulib_tool_options="\
--import\
--no-changelog\
--aux-dir $bt/$build_aux\
--doc-base $bt/$doc_base\
--lib $gnulib_name\
--m4-base $bt/$m4_base/\
--source-base $bt/$source_base/\
--tests-base $bt/$tests_base\
--local-dir $local_gl_dir\
$gnulib_tool_option_extras\
"
if test $use_libtool = 1; then
case "$gnulib_tool_options " in
*' --libtool '*) ;;
*) gnulib_tool_options="$gnulib_tool_options --libtool" ;;
esac
fi
echo "$0: $gnulib_tool $gnulib_tool_options --import ..."
$gnulib_tool $gnulib_tool_options --import $gnulib_modules &&
slurp $bt || exit
for file in $gnulib_files; do
symlink_to_dir "$GNULIB_SRCDIR" $file || exit
done
# Import from gettext.
with_gettext=yes
grep '^[ ]*AM_GNU_GETTEXT_VERSION(' configure.ac >/dev/null || \
with_gettext=no
if test $with_gettext = yes; then
echo "$0: (cd $bt2; ${AUTOPOINT-autopoint}) ..."
cp configure.ac $bt2 &&
(cd $bt2 && ${AUTOPOINT-autopoint} && rm configure.ac) &&
slurp $bt2 $bt || exit
fi
rm -fr $bt $bt2 || exit
# Remove any dangling symlink matching "*.m4" or "*.[ch]" in some
# gnulib-populated directories. Such .m4 files would cause aclocal to fail.
# The following requires GNU find 4.2.3 or newer. Considering the usual
# portability constraints of this script, that may seem a very demanding
# requirement, but it should be ok. Ignore any failure, which is fine,
# since this is only a convenience to help developers avoid the relatively
# unusual case in which a symlinked-to .m4 file is git-removed from gnulib
# between successive runs of this script.
find "$m4_base" "$source_base" \
-depth \( -name '*.m4' -o -name '*.[ch]' \) \
-type l -xtype l -delete > /dev/null 2>&1
# Reconfigure, getting other files.
# Skip autoheader if it's not needed.
grep -E '^[ ]*AC_CONFIG_HEADERS?\>' configure.ac >/dev/null ||
AUTOHEADER=true
for command in \
libtool \
"${ACLOCAL-aclocal} --force -I m4 $ACLOCAL_FLAGS" \
"${AUTOCONF-autoconf} --force" \
"${AUTOHEADER-autoheader} --force" \
"${AUTOMAKE-automake} --add-missing --copy --force-missing"
do
if test "$command" = libtool; then
test $use_libtool = 0 \
&& continue
command="${LIBTOOLIZE-libtoolize} -c -f"
fi
echo "$0: $command ..."
$command || exit
done
# Get some extra files from gnulib, overriding existing files.
for file in $gnulib_extra_files; do
case $file in
*/INSTALL) dst=INSTALL;;
build-aux/*) dst=$build_aux/`expr "$file" : 'build-aux/\(.*\)'`;;
*) dst=$file;;
esac
symlink_to_dir "$GNULIB_SRCDIR" $file $dst || exit
done
if test $with_gettext = yes; then
# Create gettext configuration.
echo "$0: Creating po/Makevars from po/Makevars.template ..."
rm -f po/Makevars
sed '
/^EXTRA_LOCALE_CATEGORIES *=/s/=.*/= '"$EXTRA_LOCALE_CATEGORIES"'/
/^COPYRIGHT_HOLDER *=/s/=.*/= '"$COPYRIGHT_HOLDER"'/
/^MSGID_BUGS_ADDRESS *=/s|=.*|= '"$MSGID_BUGS_ADDRESS"'|
/^XGETTEXT_OPTIONS *=/{
s/$/ \\/
a\
'"$XGETTEXT_OPTIONS"' $${end_of_xgettext_options+}
}
' po/Makevars.template >po/Makevars || exit 1
if test -d runtime-po; then
# Similarly for runtime-po/Makevars, but not quite the same.
rm -f runtime-po/Makevars
sed '
/^DOMAIN *=.*/s/=.*/= '"$package"'-runtime/
/^subdir *=.*/s/=.*/= runtime-po/
/^MSGID_BUGS_ADDRESS *=/s/=.*/= bug-'"$package"'@gnu.org/
/^XGETTEXT_OPTIONS *=/{
s/$/ \\/
a\
'"$XGETTEXT_OPTIONS_RUNTIME"' $${end_of_xgettext_options+}
}
' po/Makevars.template >runtime-po/Makevars || exit 1
# Copy identical files from po to runtime-po.
(cd po && cp -p Makefile.in.in *-quot *.header *.sed *.sin ../runtime-po)
fi
fi
bootstrap_epilogue
echo "$0: done. Now you can run './configure'."
# Local variables:
# eval: (add-hook 'write-file-hooks 'time-stamp)
# time-stamp-start: "scriptversion="
# time-stamp-format: "%:y-%02m-%02d.%02H"
# time-stamp-time-zone: "UTC"
# time-stamp-end: "; # UTC"
# End: