This switches to newer freebsd 14.1 and implements the new RUN_PIPELINE
behaviour introduced by Daniel.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Update with latest lcitool.
Update the build templates to move the definition of exit codes which
are allowed to fail for cirrus jobs for cases when we run out of CI
minutes. The previous location was overridden with the per-job
'allow_failure' value and thus didn't apply.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Major changes:
* macOS 13 is removed. Cirrus CI now only supports a single
version, macOS 14, so there is no addition of macOS 15
possible.
* The polkit lcitool mapping is renamed to pkcheck
* The polkit package is renamed on Debian & Ubuntu
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
It is no longer used by libvirt so it's pointless to install it.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Install json-c to ensure the pipeline stays green throughout the series.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
It was released on June 12, 2024.
The update means we no longer have to care about json-c 0.13
present in Leap 15.5, which solves some whitespace issues in
tests.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
This is supposed to unstuck FreeBSD as it switched to
Python-3.11.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The ci/manifest.yml file references a package 'libclang-rt-dev' that
does not exist in libvirt-ci mappings.yml. The latest refresh in
commit 0759cf3fa6
Author: Michal Prívozník <mprivozn@redhat.com>
Date: Fri May 3 15:58:20 2024 +0200
ci: Introduce Ubuntu 24.04
was presumably done against a local change to libvirt-ci.git that
had not yet been merged, as the clang packages now appear on many
more build envs.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Ubuntu 24.04 was released recently. Add it to our CI. Also, to be
able to run ASAN/UBSAN builds on Ubuntu 24.04 libclang-rt-dev
needs to be installed (because clang's runtime was moved into a
separate package). Hence so many seemingly unrelated changes.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
It's now more than two years since Ubuntu 22.04 was released and
per our support policy, Ubuntu 20.04 (the previous major release)
is now not supported. Remove it from our CI testing.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Since Fedora 40 was released recently, Fedora 38 is now
unsupported. Drop Fedora 38 and introduce Fedora 40 to our CI.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
By the time of release, it's going to be more than two years
since AlmaLinux 9 was released and per our support policy,
AlmaLinux 8 (the previous major release) will be not supported.
Switch from AlmaLinux 8 to AlmaLinux 9.
This also means the website_job which depends on AlmaLinux 8
needs to be moved to newer AlmaLinux.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This drops the CentOS 8 Stream distro target, since that is going EOL
at the end of May, at which point it will cease to be installable
due to package repos being archived.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This brings in a fix to the job rules which solves a problem with
jobs getting skipped in merge requests in some scenarios. It also
changes the way Cirrus CI vars are set, which involves a weak to
the way $PATH is set in build.yml.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Picks up the switch from FreeBSD 13.2 to 13.3
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Regenerate the ci files using the latest libvirt-ci:
commit face9746f9729699ae8525ffac4ee19be82c1ba5
ci: drop update-alternatives for opensuse tumbleweed
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Regenerate the ci files using the latest libvirt-ci:
commit 5b9b11261fa28cae964fd91638056318f270e300
examples: illustrate use of remote project reference
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
libvirt commit 120a674f25
ci: lcitool: Maintain project package deps lists here
added an override file for lcitool in August, but nobody regenerating
libvirt's ci files from the manifest seemed to use the override dir.
libvirt-ci commit 1f4184edfdd541964a187810b34ac4c7702b6577
commandline: set --extra-data-dir default path
from January made $PWD/ci/lcitool the default.
Reflect the changes made in libvirt-ci's repo here too.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
The latest lcitool merged the 'prebuilt-env' and 'local-env' jobs into
one which use variables to pick up the right environment and steps
rather than duplicating everything.
Regenerate the generated job definitions, fix the helper definitions
and also fix the manually defined jobs (website-job).
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Entering $SCRATCH_DIR, going back to the original directory and
setting SELinux labels for the newly-installed QEMU binaries
are all steps that logically belong to this template rather
than its callers.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We enter $SCRATCH_DIR before going through the process of
cloning QEMU's upstream repo and building it, but once we're
done we don't get back to libvirt's sources, so the very next
step fails with
/tmp/script.: line 188: ci/jobs.sh: No such file or directory
Use pushd/popd to ensure that we're back to the correct place
once QEMU has been built and installed.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
These are special in that, when a new target is introduced, some
preparation is needed before the changes can be merged. Since
this only happens every six months or so, it's unsurprising that
we keep messing it up and forgetting some steps. Having notes
right in the file will hopefully help going forward.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
These are jobs are supposed to be running tests using a QEMU
binary built from the latest upstream sources, but right now
they're just doing the same thing as the other jobs for the
target. Use the correct job templates.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
New Alpine and Fedora releases were added to libvirt-ci (3.19 and
39, respectively) and old ones were removed. Update the manifest
file and regenerate the rest.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Currently, Fedora 37 and 38 is used. The former is now EOL since
there's new release. Switch 37 to 39 then.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
FreeBSD 12.0 is no longer supported since 14.0 is out. Change the
CI manifest and refresh the rest.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
All BuildRequires should now be part of the build environment,
so it's no longer needed.
This ensures that, if we forget to add some BuildRequires to the
build environment in the future, the mistake will be quickly
detected.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Now that the spec file supports selectively disabling the native,
mingw32 and mingw64 parts, we can add coverage for the MinGW RPM
builds.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Gain native gettext on MinGW, lose glusterfs on 32-bit
architectures and rpcgen everywhere.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Temporarily disable '-Wmissing-include-dirs' becuase the
libtirpc pkg-config file has a bogus include dir. The
headers can fortunately still be found since they are
in the system include dir.
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Clang can be too aggressive at optimizations, which can end up
breaking our test suite. See f9f5ab5718 for details.
As a result of this, since 7944700b40 we are automatically
disabling tests when Clang is used unless it supports the
-fsemantic-interposition compiler flag.
Since the version of Clang included in macOS doesn't support that
compiler flag, we end up always disabling the test suite on that
platform.
This is already far from ideal, considering that it was just last
year when we finally managed to get the test suite to successfully
pass on macOS, and it would be a real shame if the situation
regressed again.
With the upcoming changes, which will turn running 'meson test'
into a hard failure if tests are disabled, this behavior will
result in every single pipeline failing.
Work around the problem the only way we can: disabling
optimizations entirely for the macOS CI jobs.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Running outside of GitLab will likely not have the variable set and
hence the execution would fail. To make sure we always start with a
clean scratch dir (which may or may not be the best thing), create it
with 'mktemp'. The main reason for a temporary directory is to ensure a
clean environment for the job every time run_integration function is
run. For repeated interactive use case, it is imperative that the
developer takes care of their environment.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
One advantage that GitLab's YAML has with Shell commands is that every
single line is printed out as is, including control structures. In
order to see whether the logic did the same thing and the tests are
going to operate on the right set of daemons (monolithic vs modular),
lets print the DAEMONS variable that we set depending on the distro we
execute the tests on.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Unfortunately, once we go down the line of running our own scripts as
part of GitLab CI jobs rather than open coding Shell in YAML, we lose
the benefit of seeing each line the script executes. The downside of
the default YAML however is that we have to maintain the same piece of
code on 2 places in that case. Let's adopt what we use with other
container jobs and prefix each shell command with 'run_cmd' or
'run_cmd_quiet' which will dump it in the logs before executing.
Flow control expressions and structures are a problem though in this
regard, so let's just print some important values for debugging
purposes.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
We've started using the run_cmd helper function to log what kind of
command is being executed as well as actually executing the command.
The problem however is doing I/O redirections for commands which we
don't wish to see any output for whatever reason. Now, if the
redirection is applied at parameter passing to run_cmd it's going to be
applied to the debug print as well. Let's introduce another helper,
run_cmd_quiet which takes care of the I/O redirection and executes the
command completely silently.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Neither '&>' nor 'source' are defined in POSIX.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Because of the nature of writing inline shell commands to YAML, most of
the commentaries where inlined with the command not to hinder YAML
readability any further. Since we moved the logic to a standalone
script, we can now do whatever formatting & readability adjustments we
want.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
We've not been interested in any extra output from the command at all
since we always redirected both stdout and stderr to /dev/null. Future
patch will change that slightly, so --quiet will start making sense.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
