Seems a backport miss. An extra member is passed to struct
virLXCBasicMountInfo.
Signed-off-by: Yang hongyang <hongyang.yang@easystack.cn>
Commit bda5f2b (a backport of commit 2471041) listed one more value
than the virLXCBasicMountInfo has here, because v1.2.9-maint does
not have the skipNoNetns bool (introduced by commit ba9b725 released
in 1.2.11).
Signed-off-by: Ján Tomko <jtomko@redhat.com>
CVE-2016-5008
Setting an empty graphics password is documented as a way to disable
VNC/SPICE access, but QEMU does not always behaves like that. VNC would
happily accept the empty password. Let's enforce the behavior by setting
password expiration to "now".
https://bugzilla.redhat.com/show_bug.cgi?id=1180092
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
(cherry picked from commit bb848feec0)
The libvirt file system storage driver determines what file to
act on by concatenating the pool location with the volume name.
If a user is able to pick names like "../../../etc/passwd", then
they can escape the bounds of the pool. For that matter,
virStoragePoolListVolumes() doesn't descend into subdirectories,
so a user really shouldn't use a name with a slash.
Normally, only privileged users can coerce libvirt into creating
or opening existing files using the virStorageVol APIs; and such
users already have full privilege to create any domain XML (so it
is not an escalation of privilege). But in the case of
fine-grained ACLs, it is feasible that a user can be granted
storage_vol:create but not domain:write, and it violates
assumptions if such a user can abuse libvirt to access files
outside of the storage pool.
Therefore, prevent all use of volume names that contain "/",
whether or not such a name is actually attempting to escape the
pool.
This changes things from:
$ virsh vol-create-as default ../../../../../../etc/haha --capacity 128
Vol ../../../../../../etc/haha created
$ rm /etc/haha
to:
$ virsh vol-create-as default ../../../../../../etc/haha --capacity 128
error: Failed to create vol ../../../../../../etc/haha
error: Requested operation is not valid: volume name '../../../../../../etc/haha' cannot contain '/'
Signed-off-by: Eric Blake <eblake@redhat.com>
(cherry picked from commit 034e47c338)
Well, in 8ad126e6 we tried to fix a memory corruption problem.
However, the fix was not as good as it could be. I mean, the
commit has one line more than it should. I've noticed this output
just recently:
# ./run valgrind --leak-check=full --show-reachable=yes ./tools/virsh domblklist gentoo
==17019== Memcheck, a memory error detector
==17019== Copyright (C) 2002-2013, and GNU GPL'd, by Julian Seward et al.
==17019== Using Valgrind-3.10.1 and LibVEX; rerun with -h for copyright info
==17019== Command: /home/zippy/work/libvirt/libvirt.git/tools/.libs/virsh domblklist gentoo
==17019==
Target Source
------------------------------------------------
fda /var/lib/libvirt/images/fd.img
vda /var/lib/libvirt/images/gentoo.qcow2
hdc /home/zippy/tmp/install-amd64-minimal-20150402.iso
==17019== Thread 2:
==17019== Invalid read of size 4
==17019== at 0x4EFF5B4: virObjectUnref (virobject.c:258)
==17019== by 0x5038CFF: remoteClientCloseFunc (remote_driver.c:552)
==17019== by 0x5069D57: virNetClientCloseLocked (virnetclient.c:685)
==17019== by 0x506C848: virNetClientIncomingEvent (virnetclient.c:1852)
==17019== by 0x5082136: virNetSocketEventHandle (virnetsocket.c:1913)
==17019== by 0x4ECD64E: virEventPollDispatchHandles (vireventpoll.c:509)
==17019== by 0x4ECDE02: virEventPollRunOnce (vireventpoll.c:658)
==17019== by 0x4ECBF00: virEventRunDefaultImpl (virevent.c:308)
==17019== by 0x130386: vshEventLoop (vsh.c:1864)
==17019== by 0x4F1EB07: virThreadHelper (virthread.c:206)
==17019== by 0xA8462D3: start_thread (in /lib64/libpthread-2.20.so)
==17019== by 0xAB441FC: clone (in /lib64/libc-2.20.so)
==17019== Address 0x139023f4 is 4 bytes inside a block of size 240 free'd
==17019== at 0x4C2B1F0: free (in /usr/lib64/valgrind/vgpreload_memcheck-amd64-linux.so)
==17019== by 0x4EA8949: virFree (viralloc.c:582)
==17019== by 0x4EFF6D0: virObjectUnref (virobject.c:273)
==17019== by 0x4FE74D6: virConnectClose (libvirt.c:1390)
==17019== by 0x13342A: virshDeinit (virsh.c:406)
==17019== by 0x134A37: main (virsh.c:950)
The problem is, when registering remoteClientCloseFunc(), it's
conn->closeCallback which is ref'd. But in the function itself
it's conn->closeCallback->conn what is unref'd. This is causing
imbalance in reference counting. Moreover, there's no need for
the remote driver to increase/decrease conn refcount since it's
not used anywhere. It's just merely passed to client registered
callback. And for that purpose it's correctly ref'd in
virConnectRegisterCloseCallback() and then unref'd in
virConnectUnregisterCloseCallback().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
(cherry picked from commit e689300770)
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This reverts commit 1ce7c1d20c,
which introduced a significant semantic change to the
virDomainGetInfo() API. Additionally, the change was only
made to 2 of the 15 virt drivers.
Conflicts:
src/qemu/qemu_driver.c
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
(cherry picked from commit 60acb38abb)
Future kernels will mandate the use of nosuid+nodev+noexec
flags when mounting the /proc/sys filesystem. Unconditionally
add them now since they don't harm things regardless and could
mitigate future security attacks.
(cherry picked from commit 24710414d4)
Conflicts:
src/lxc/lxc_container.c
The cpu xml copy is incorrect: the memAccess field is not copied.
The lack of copy of this memAccess field can cause unexpected behaviour for live
migration when vhost user is used.
For example if guest has the following configuration:
....
<cpu>
<model>Westmere</model>
<topology sockets="1" cores="4" threads="1"/>
<numa>
<cell id='0' cpus='0-3' memory='2097152' memAccess='shared'/>
</numa>
</cpu>
....
The used configuration on the remote host in case of live migration is:
....
<cpu mode='custom' match='exact'>
<model fallback='allow'>Westmere</model>
<topology sockets='1' cores='4' threads='1'/>
<numa>
<cell id='0' cpus='0-3' memory='2097152' unit='KiB'/>
</numa>
</cpu>
....
On the remote host the lack of memAccess info can cause unexpected error on the
qemu backend vhost user driver.
Fixes: def6b3598 ("docs, conf, schema: add support for shared memory mapping")
This issue is present only for libvirt1.2.9 to libvirt1.2.12
With patch 181742d43 ("conf: Move all NUMA configuration to virDomainNuma")
present since libvirt1.2.13 the problem does not exist anymore as NUMA
information are no more in the CPU configuration.
Signed-off-by: Thibaut Collet <thibaut.collet@6wind.com>
Trying to use qemu:///session to create a storage pool pointing at
/tmp will usually fail with something like:
$ virsh pool-start tmp
error: Failed to start pool tmp
error: cannot open volume '/tmp/systemd-private-c38cf0418d7a4734a66a8175996c384f-colord.service-kEyiTA': Permission denied
If any volume in an FS pool can't be opened by the daemon, the refresh
fails, and the pool can't be used.
This causes pain for virt-install/virt-manager though. Imaging a user
downloads a disk image to /tmp. virt-manager wants to import /tmp as
a storage pool, so we can detect what disk format it is, and set the
XML correctly. However this case will likely fail as explained above.
Change the logic here to skip volumes that fail to open. This could
conceivably cause user complaints along the lines of 'why doesn't
libvirt show $ROOT-OWNED-VOLUME-FOO', but figuring that currently
the pool won't even startup, I don't think there are any current
users that care about that case.
https://bugzilla.redhat.com/show_bug.cgi?id=1103308
(cherry picked from commit 56476f6a2d)
When parsing XML, we validate the passed ostype + arch combo against
the detected hypervisor capabilities. This has led to the following
problem:
- Define x86 qemu guest
- qemu is inadvertently removed from the host
- libvirtd is restarted. fails to parse VM config since arch is removed
- 'virsh list --all' is now empty, user is wondering where their VMs went
Add a new internal flag VIR_DOMAIN_DEF_PARSE_SKIP_OSTYPE_CHECKS. Use
it when loading VM and snapshot configs from disk.
https://bugzilla.redhat.com/show_bug.cgi?id=1043572
(cherry picked from commit f1a89a8b6d)
If no <os><type> was specified:
before: unknown OS type no OS type
after : xml error: an os <type> must be specified
If an <os><type> is specified that's not in our capabiliities data:
before: unknown OS type: $type
after : unsupported configuration: no support found for os <type> '$type'
VIR_ERR_OS_TYPE is now unused (as it should be frankly) so drop its strings
as well to save our translators some effort.
(cherry picked from commit 3700c065cd)
If probing capabilities via QMP fails, we now have a check
that prevents us falling back to -help parsing. Unfortunately
the error message
"Failed to probe capabilities for /usr/bin/qemu-kvm:
unsupported configuration: QEMU 2.1.2 is too new for help parsing"
is proving rather unhelpful to the user. We need to be telling
them why QMP failed (the root cause), rather than they can't
use -help (the side effect).
To do this we should capture stderr during QMP probing, and
if -help parsing then sees a new QEMU version, we know that
QMP should have worked, and so we can show the messages from
stderr. The message thus becomes
"Failed to probe capabilities for /usr/bin/qemu-kvm:
internal error: QEMU / QMP failed: Could not access
KVM kernel module: No such file or directory
failed to initialize KVM: No such file or directory"
(cherry picked from commit 25bf888a66)
QEMU 2.3 adds these new models to cover Haswell and Broadwell CPUs with
updated microcode. Luckily, they also reverted former the machine type
specific changes to existing models. And since these changes were never
released, we don't need to hack around them in libvirt.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
(cherry picked from commit c563b50605)
When creating a disk image snapshot the libvirt code would blindly copy
the parents label to the newly created image. This runs into problems
when you start a VM from an image hosted on NFS (or other storage system
that doesn't support selinux labels) and the snapshot destination is on
a storage system that does support selinux labels. Libvirt's code in
that case generates a different security label for the image hosted on
NFS. This label is valid only for NFS images and doesn't allow access in
case of a locally stored image.
To fix this issue libvirt needs to refrain from copying security
information in cases where the default domain seclabel is a better
choice.
This patch repurposes the now unused @force argument of
virStorageSourceInitChainElement to denote whether a copy of the
security labelling stuff should be attempted or not. This allows to
fine-control the copy operation for cases where we need to keep the
label of the old disk vs. the cases where we need to keep the label
unset to use the default domain imagelabel.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1151718
(cherry picked from commit 7e130e8b35)
For host-passthrough CPU we don't honor the CPU
features specified in the XML, but we allow
outputting them via the UPDATE_CPU flag for dumpxml,
this gives user a rough idea of what features the CPU
might have.
After restoring a managedsave'd domain, the features
might end up in the live status XML (in /var/run) without
the model. This XML cannot be parsed by the daemon after
restart and the domain might disappear.
This fix skips formatting the features for HOST_PASSTHROUGH
when UPDATE_CPU is not specified, so the newly restored domains
and newly created snapshots won't be affected.
Note: this doesn't fix existing snapshots or already restored
running domains.
https://bugzilla.redhat.com/show_bug.cgi?id=1030793https://bugzilla.redhat.com/show_bug.cgi?id=1151885
(cherry picked from commit dd324bb270)
https://bugzilla.redhat.com/show_bug.cgi?id=1209948
So we have this bug. The virConnectGetDomainCapabilities() API
performs a couple of checks before it produces any result. One of
the checks is if the architecture requested by user can be run by
the binary (again user provided). However, the check is pretty
dumb. It merely compares if the default binary architecture
matches the one provided by user. However, a qemu binary can run
multiple architectures. For instance: qemu-system-ppc64 can run:
ppc, ppcle, ppc64, ppc64le and ppcemb. The default is ppc64, so
if user requested something else, like ppc64le, the check would
have failed without obvious reason.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
(cherry picked from commit 0af9325e6a)
The fake object is used to pass the domain name and UUID to the ACL code
for events where we don't have the full domain def when dispatching
events. The rest of the entries would be left uninitialized. While this
is not a problem code-wise as the used fields are initialized it looks
ugly in the debugger.
(cherry picked from commit 6ca857c7c8)
Don't unref the old identity unless we set the new one correctly and
unref the new one on failure to set it so that we don't leak any
references or use invalid pointers.
(cherry picked from commit ad886fa6c8)
In systemd >= 218, the udev_set_log_fn method has been marked
deprecated and turned into a no-op. Nothing in the udev client
library will print to stderr by default anymore, so we can
just stop installing a logging hook for new enough udev.
(cherry picked from commit a93a3b975c)
- Remove all qemu emulators
- Restart libvirtd
- Install qemu emulators
- Call 'virsh version' -> errors
The only thing that will force the qemu driver to refresh it's cached
capablities info is an explict API call to GetCapabilities.
However in the case when the initial caps lookup at driver connect didn't
find a single qemu emulator to poll, the driver is effectively useless
and really can't do anything until it's populated some qemu capabilities
info.
With the above steps, the user would have to either know about the
magic refresh capabilities call, or restart libvirtd to pick up the
changes.
Instead, this patch changes things so that every time a part of th
driver requests access to capabilities info, check to see if
we've previously seen any emulators. If not, force a refresh.
In the case of 'still no emulators found', this is still very quick, so
I can't think of a downside.
https://bugzilla.redhat.com/show_bug.cgi?id=1000116
(cherry picked from commit 95546c43de)
If VM is configured with many devices(including passthrough devices)
and large memory, libvirtd will take seconds(in the worst case) to
wait for monitor. In this period the qemu process may run on any
PCPU though I intend to pin emulator to the specified PCPU in xml
configuration.
Actually qemu process takes high cpu usage during vm startup.
So this is not the strict CPU isolation in this case.
Signed-off-by: Zhou yimin <zhouyimin@huawei.com>
(cherry picked from commit 411cea638f)
While this thread is cleaning up the client and connection objects:
#2 virFileReadAll (path=0x7f28780012b0 "/proc/1319/stat", maxlen=maxlen@entry=1024, buf=buf@entry=0x7f289c60fc40) at util/virfile.c:1287
#3 0x00007f28adbb1539 in virProcessGetStartTime (pid=<optimized out>, timestamp=timestamp@entry=0x7f289c60fc98) at util/virprocess.c:838
#4 0x00007f28adb91981 in virIdentityGetSystem () at util/viridentity.c:151
#5 0x00007f28ae73f17c in remoteClientFreeFunc (data=<optimized out>) at remote.c:1131
#6 0x00007f28adcb7f33 in virNetServerClientDispose (obj=0x7f28aecad180) at rpc/virnetserverclient.c:858
#7 0x00007f28adba8eeb in virObjectUnref (anyobj=<optimized out>) at util/virobject.c:265
#8 0x00007f28ae74ad05 in virNetServerHandleJob (jobOpaque=<optimized out>, opaque=0x7f28aec93ff0) at rpc/virnetserver.c:205
#9 0x00007f28adbbef4e in virThreadPoolWorker (opaque=opaque@entry=0x7f28aec88030) at util/virthreadpool.c:145
In stack frame #6 the client->identity object got unref'd, but the code
that removes the event callbacks in frame #5 did not run yet as we are
trying to obtain the system identity (frames #4, #3, #2).
In other thead:
#0 virObjectUnref (anyobj=anyobj@entry=0x7f288c162c60) at util/virobject.c:264
klass = 0xdeadbeef
obj = 0x7f288c162c60
#1 0x00007f28ae71c709 in remoteRelayDomainEventCheckACL (client=<optimized out>, conn=<optimized out>, dom=dom@entry=0x7f28aecaafc0) at remote.c:164
#2 0x00007f28ae71fc83 in remoteRelayDomainEventTrayChange (conn=<optimized out>, dom=0x7f28aecaafc0, ... ) at remote.c:717
#3 0x00007f28adc04e53 in virDomainEventDispatchDefaultFunc (conn=0x7f287c0009a0, event=0x7f28aecab1a0, ...) at conf/domain_event.c:1455
#4 0x00007f28adc03831 in virObjectEventStateDispatchCallbacks (callbacks=<optimized out>, ....) at conf/object_event.c:724
#5 virObjectEventStateQueueDispatch (callbacks=0x7f288c083730, queue=0x7fff51f90030, state=0x7f288c18da20) at conf/object_event.c:738
#6 virObjectEventStateFlush (state=0x7f288c18da20) at conf/object_event.c:816
#7 virObjectEventTimer (timer=<optimized out>, opaque=0x7f288c18da20) at conf/object_event.c:562
#8 0x00007f28adb859cd in virEventPollDispatchTimeouts () at util/vireventpoll.c:459
Frame #0 is unrefing an invalid identity object while frame #2 hints
that the client is still dispatching the event.
For untrimmed backtrace see the bugzilla attachment.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1203030
(cherry picked from commit a98129c0ee)
The mode attribute is required for the source element of vhost-user.
Thus virDomainNetDefFormat should always generate a xml with it and not
only when the mode is server.
The commit fixes the issue. And it adds a vhostuser interface in
'client' mode to qemuxml2argv-net-vhostuser.(args|xml) to test this
usecase.
Signed-off-by: Maxime Leroy <maxime.leroy@6wind.com>
(cherry picked from commit 302720742f)
The virNodeDeviceDettach API only works on PCI devices.
Originally added by commit 10d3272e, but the API never
supported USB devices.
Reported by: Martin Polednik <mpolednik@redhat.com>
(cherry picked from commit e600a37d27)
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Commit bab2eda changed the behavior for missing compat attribute,
but failed to update the documentation.
Before, the option was omitted from qemu-img command line and the
qemu-img default was used. Now we always specify the compat value
and the default is 0.10.
Reported by Christophe Fergeau
https://bugzilla.gnome.org/show_bug.cgi?id=746660#c4
(cherry picked from commit 7c8ae42d49)
Signed-off-by: Ján Tomko <jtomko@redhat.com>
The version attribute in redirdev filters refers to the revision
of the device, not the version of the USB protocol.
Explicitly state that this is not the USB protocol and remove references
to those round version numbers that resemble USB protocol versions.
https://bugzilla.redhat.com/show_bug.cgi?id=1177237
(cherry picked from commit 76a2a5ce8b)
Signed-off-by: Ján Tomko <jtomko@redhat.com>
These cannot be represented in XML.
We have been stripping them, but only if the string had
characters that needed escaping: <>"'&
Extend the strcspn check to include control codes, and strip
them even if we don't do any escaping.
https://bugzilla.redhat.com/show_bug.cgi?id=1184131https://bugzilla.redhat.com/show_bug.cgi?id=1066564
(cherry picked from commit aeb5262e43)
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Conflict:
missing struct testBufAddStrData
Add virStringHasControlChars that checks if the string has
any control characters other than \t\r\n,
and virStringStripControlChars that removes them in-place.
(cherry picked from commit 2a530a3e50)
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Conflicts:
src/libvirt_private.syms
src/util/virstring.c
src/util/virstring.h
tests/virstringtest.c
virStringStripIPv6Brackets is not backported
https://bugzilla.redhat.com/show_bug.cgi?id=1182486
When updating a network and adding new ip-dhcp-host entry, the deamon
may crash. The problem is, we iterate over existing <host/> entries
trying to compare MAC addresses to see if there's already an existing
rule. However, not all entries are required to have MAC address. For
instance, the following is perfectly valid entry:
<host id='00:04:58:fd:e4:15:1b:09:4c:0e:09:af:e4:d3:8c:b8:ca:1e'
name='redhatipv6.redhat.com' ip='2001:db8:ca2:2::119'/>
When the checking loop iterates over this, the entry's MAC address is
accessed directly. Well, the fix is obvious - check if the address is
defined before trying to compare it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
(cherry picked from commit 7d3ae359db)
Commit 4f25146 (v1.2.8) managed to silence Coverity, but at the
cost of a memory leak detected by valgrind:
==24129== 40 bytes in 5 blocks are definitely lost in loss record 355 of 637
==24129== at 0x4A08B1C: realloc (in /usr/lib64/valgrind/vgpreload_memcheck-amd64-linux.so)
==24129== by 0x5084B8E: virReallocN (viralloc.c:245)
==24129== by 0x514D5AA: virDomainObjListExport (domain_conf.c:22200)
==24129== by 0x201227DB: qemuConnectListAllDomains (qemu_driver.c:18042)
==24129== by 0x51CC1B6: virConnectListAllDomains (libvirt-domain.c:6797)
==24129== by 0x14173D: remoteDispatchConnectListAllDomains (remote.c:1580)
==24129== by 0x121BE1: remoteDispatchConnectListAllDomainsHelper (remote_dispatch.h:1072)
In short, every time a client calls a ListAll variant and asks
for the resulting list, but there are 0 elements to return, we
end up leaking the 1-entry array that holds the NULL terminator.
What's worse, a read-only client can access these functions in a
tight loop to cause libvirtd to eventually run out of memory; and
this can be considered a denial of service attack against more
privileged clients. Thankfully, the leak is so small (8 bytes per
call) that you would already have some other denial of service with
any guest calling the API that frequently, so an out-of-memory
crash is unlikely enough that this did not warrant a CVE.
* daemon/remote.c (remoteDispatchConnectListAllDomains)
(remoteDispatchDomainListAllSnapshots)
(remoteDispatchDomainSnapshotListAllChildren)
(remoteDispatchConnectListAllStoragePools)
(remoteDispatchStoragePoolListAllVolumes)
(remoteDispatchConnectListAllNetworks)
(remoteDispatchConnectListAllInterfaces)
(remoteDispatchConnectListAllNodeDevices)
(remoteDispatchConnectListAllNWFilters)
(remoteDispatchConnectListAllSecrets)
(remoteDispatchNetworkGetDHCPLeases): Plug leak.
Signed-off-by: Eric Blake <eblake@redhat.com>
(cherry picked from commit 3c2ff5029b)
Signed-off-by: Eric Blake <eblake@redhat.com>
Conflicts:
daemon/remote.c - context with older cleanup styles
In virNetworkDHCPHostDefParseXML an error is reported
when partialOkay == true, and none of ip, mac, name
were supplied.
Add the missing goto and error out in this case.
(cherry picked from commit b15b21f3a5)
https://bugzilla.redhat.com/show_bug.cgi?id=1196503
We already check whether the host id is valid or not, add a jump
to forbid invalid host id.
Signed-off-by: Luyao Huang <lhuang@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
(cherry picked from commit 719cd2182b)
https://bugzilla.redhat.com/show_bug.cgi?id=1177194
When migrate a vm, we will generate a xml via qemuDomainDefFormatLive and
pass this xml to target libvirtd. Libvirt will use the current network
state in def->data.network.actual to generate the xml, this will make
migrate failed when we set a network type guest interface use a macvtap
network as a source in a vm then migrate vm to another host(which has the
different macvtap network settings: different interface name, bridge name...)
Add a flag check in virDomainNetDefFormat, if we set a VIR_DOMAIN_XML_MIGRATABLE
flag when call virDomainNetDefFormat, we won't get the current vm interface
state.
Signed-off-by: Luyao Huang <lhuang@redhat.com>
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
The function virDomainVcpuPinDel() used vcpupin_list to stand for
def->cputune.vcpupin, which made the codes more readable.
However, in this function, it will realloc vcpupin_list later.
As the definition of realloc(), it may free vcpupin_list and then
points it to a new-realloced address, but def->cputune.vcpupin doesn't
point to the new address(it's freed however).
Thus,
1) When we refer to the def->cputune.vcpupin afterwards, which was freed
by realloc(), an INVALID READ occurs, and libvirtd may crash.
2) As no one will use vcpupin_list any more, and no one frees it(it's just
alloced by realloc()), memory leak occurs.
Part of the valgrind logs are shown as below:
==1837== Thread 15:
==1837== Invalid read of size 8
==1837== at 0x5367337: virDomainDefFormatInternal (domain_conf.c:18392)
which is : virBufferAsprintf(buf, "<vcpupin vcpu='%u' ",
def->cputune.vcpupin[i]->vcpuid);
==1837== by 0x536966C: virDomainObjFormat (domain_conf.c:18970)
==1837== by 0x5369743: virDomainSaveStatus (domain_conf.c:19166)
==1837== by 0x117B26DC: qemuDomainPinVcpuFlags (qemu_driver.c:4586)
==1837== by 0x53EA313: virDomainPinVcpuFlags (libvirt.c:9803)
==1837== by 0x14CB7D: remoteDispatchDomainPinVcpuFlags (remote_dispatch.h:6762)
==1837== by 0x14CC81: remoteDispatchDomainPinVcpuFlagsHelper (remote_dispatch.h:6740)
==1837== by 0x5464C30: virNetServerProgramDispatchCall (virnetserverprogram.c:437)
==1837== by 0x546507A: virNetServerProgramDispatch (virnetserverprogram.c:307)
==1837== by 0x171B83: virNetServerProcessMsg (virnetserver.c:172)
==1837== by 0x171E6E: virNetServerHandleJob (virnetserver.c:193)
==1837== by 0x5318E78: virThreadPoolWorker (virthreadpool.c:145)
==1837== Address 0x12ea2870 is 0 bytes inside a block of size 16 free'd
==1837== at 0x4C291AC: realloc (in /usr/lib64/valgrind/vgpreload_memcheck-amd64-linux.so)
==1837== by 0x52A3D14: virReallocN (viralloc.c:245)
==1837== by 0x52A3DFB: virShrinkN (viralloc.c:372)
==1837== by 0x52A3F57: virDeleteElementsN (viralloc.c:503)
==1837== by 0x533939E: virDomainVcpuPinDel (domain_conf.c:15405) //doReset为true时才会进到。
==1837== by 0x117B2642: qemuDomainPinVcpuFlags (qemu_driver.c:4573)
==1837== by 0x53EA313: virDomainPinVcpuFlags (libvirt.c:9803)
==1837== by 0x14CB7D: remoteDispatchDomainPinVcpuFlags (remote_dispatch.h:6762)
==1837== by 0x14CC81: remoteDispatchDomainPinVcpuFlagsHelper (remote_dispatch.h:6740)
==1837== by 0x5464C30: virNetServerProgramDispatchCall (virnetserverprogram.c:437)
==1837== by 0x546507A: virNetServerProgramDispatch (virnetserverprogram.c:307)
==1837== by 0x171B83: virNetServerProcessMsg (virnetserver.c:172)
Steps to reproduce the problem:
1) use virDomainPinVcpuFlags() to pin a guest's vcpu to all the pcpus
of the host.
This patch uses def->cputune.vcpupin instead of vcpupin_list to do the
realloc() job, to avoid invalid read or memory leaking.
Signed-off-by: Zhang Bo <oscar.zhangbo@huawei.com>
Signed-off-by: Yue Wenyuan <yuewenyuan@huawei.com@huawei.com>
(cherry picked from commit 2d27dcb0e9)
Signed-off-by: Ján Tomko <jtomko@redhat.com>
If a storage file would be backed with a NBD device without path
(nbd://localhost) libvirt would crash when parsing the backing path for
the disk as the URI structure's path element is NULL in such case but
the NBD parser would access it shamelessly.
(cherry picked from commit fdb80ed4f6)
If the memory mode is specified as 'strict' and with one node, we
get the following error when starting domain.
error: Unable to write to '$cgroup_path/cpuset.mems': Device or resource busy
XML is configured with numatune as follows:
<numatune>
<memory mode='strict' nodeset='0'/>
</numatune>
It's broken by Commit 411cea638f
which moved qemuSetupCgroupForEmulator() before setting cpuset.mems
in qemuSetupCgroupPostInit.
Directory '$cgroup_path/emulator/' is created in qemuSetupCgroupForEmulator.
But '$cgroup_path/emulator/cpuset.mems' it not set and has a default value
(all nodes, such as 0-1). Then we setup '$cgroup_path/cpuset.mems' to the
nodemask (in this case it's '0') in qemuSetupCgroupPostInit. It must fail.
This patch makes '$cgroup_path/emulator/cpuset.mems' is set before
'$cgroup_path/cpuset.mems'. The action is similar with that in
qemuDomainSetNumaParamsLive.
Signed-off-by: Wang Rui <moon.wangrui@huawei.com>
(cherry picked from commit c6e9024867)
https://bugzilla.redhat.com/show_bug.cgi?id=1176510
When storageDriverAutostart is called path virStateReload via a 'service
libvirtd reload', then because the volume list in the pool wasn't cleared
prior to the call, each volume would be listed multiple times (as many
times as we reload). I believe the issue would be introduced by commit
id '9e093f0b' at least for the libvirtd reload path, although I suppose
the introduction of virStateReload (commit id '70da0494') could be a
different cause.
Thus like other places prior to calling refreshPool, we need to call
virStoragePoolObjClearVols
(cherry picked from commit 1d2e4d8ca2)
The function is called from all {Attach,Update,Detach}Device APIs to
create config strings that are later passed to the xend to perform the
desired action. The function is intended to handle all supported
devices. However, as of 5b05358aba we
are trying to get disk driver of the device without checking if the
device really is a disk. This leads to an segmentation fault:
#0 0x00007ffff7571815 in virDomainDiskGetDriver () from /usr/lib/libvirt.so.0
#1 0x00007fffeb9ad471 in ?? () from /usr/lib/libvirt/connection-driver/libvirt_driver_xen.so
#2 0x00007fffeb9b1062 in xenDaemonAttachDeviceFlags () from /usr/lib/libvirt/connection-driver/libvirt_driver_xen.so
#3 0x00007fffeb9a8a86 in ?? () from /usr/lib/libvirt/connection-driver/libvirt_driver_xen.so
#4 0x00007ffff7609266 in virDomainAttachDevice () from /usr/lib/libvirt.so.0
#5 0x0000555555593c9d in ?? ()
#6 0x00007ffff76743c9 in virNetServerProgramDispatch () from /usr/lib/libvirt.so.0
#7 0x00005555555a678d in ?? ()
#8 0x00007ffff755460e in ?? () from /usr/lib/libvirt.so.0
#9 0x00007ffff7553b06 in ?? () from /usr/lib/libvirt.so.0
#10 0x00007ffff4998b50 in start_thread () from /lib/x86_64-linux-gnu/libpthread.so.0
#11 0x00007ffff46e30ed in clone () from /lib/x86_64-linux-gnu/libc.so.6
#12 0x0000000000000000 in ?? ()
Reported-by: Xiaolin Su <linxxnil@126.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
(cherry picked from commit cd7702d456)
The ACL check didn't check the VIR_DOMAIN_XML_SECURE flag and the
appropriate permission for it. Found via code inspection while fixing
permissions for save images.
(cherry picked from commit b347c0c2a3)
Output error when we try to set a too large max_sectors.
Just like queues and cmd_per_lun here.
Signed-off-by: Luyao Huang <lhuang@redhat.com>
(cherry picked from commit ce1d2f6315)
Signed-off-by: Ján Tomko <jtomko@redhat.com>
