src/xenxs contains parsing/formating functions for the various xen
config formats, and is better named src/xenconfig.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Perl is necessary to our build processing, it will invoke a lot of
generating script, like: gendispatch.pl. If perl is missing, it's
ok for build from git checkout, because autogen.sh will tell you.
But for compiling from a release tarball, configure will just record
a missing message, and continue, then build failed, like:
https://www.redhat.com/archives/libvirt-users/2014-August/msg00050.html
So need to enhance configure script to handle this negative case.
Reported-by: Hongbin Lu <hongbin@savinetwork.ca>
Signed-off-by: Jincheng Miao <jmiao@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Implement ZFS storage backend driver. Currently supported
only on FreeBSD because of ZFS limitations on Linux.
Features supported:
- pool-start, pool-stop
- pool-info
- vol-list
- vol-create / vol-delete
Pool definition looks like that:
<pool type='zfs'>
<name>myzfspool</name>
<source>
<name>actualpoolname</name>
</source>
</pool>
The 'actualpoolname' value is a name of the pool on the system,
such as shown by 'zpool list' command. Target makes no sense
here because volumes path is always /dev/zvol/$poolname/$volname.
User has to create a pool on his own, this driver doesn't
support pool creation currently.
A volume could be used with Qemu by adding an entry like this:
<disk type='volume' device='disk'>
<driver name='qemu' type='raw'/>
<source pool='myzfspool' volume='vol5'/>
<target dev='hdc' bus='ide'/>
</disk>
There's this question on the list that is asked over and over again.
How do I get {cpu, memory, ...} usage in percentage? Or its modified
version: How do I plot nice graphs like virt-manager does?
It would be nice if we have an example to inspire people. And that's
what domtop should do. Yes, it could be written in different ways, but
I've chosen this one as I think it show explicitly what users need to
implement in order to imitate virt-manager's graphing.
Note: The usage is displayed from host perspective. That is, how much
host CPUs the domain is using. But it should be fairly simple to
switch do just guest CPU usage if needed.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
When testing language bindings it is useful to be able to build
them against an uninstalled libvirt source tree. Add a dummy
set of pkg-config files to allow for this. This can be used by
setting
export PKG_CONFIG_PATH=/path/to/libvirt/git/src
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
For some reason there have never been pkg-config files created
for the libvirt-qemu.so and libvirt-lxc.so libraries.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Add a helper function virBhyveGetDomainTotalCpuStats() to
obtain process CPU time using kvm (kernel memory interface)
and use it to set cpuTime field of the virDomainInfo struct in
bhyveDomainGetInfo().
This commit adds a new example to illustrate peer to
peer domain migration with virDomainMigrateToURI.
Signed-off-by: Sahid Orentino Ferdjaoui <sahid.ferdjaoui@cloudwatt.com>
We don't support building libvirtd on Win32 since we lack the
fork/exec feature needed for the stateful drivers. Disable this
by default, so users can just do 'mingw32-configure' with no
special args required.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The configure definition previously always defined the GLUSTER_CLI macro
and thus the code needing it wasn't compiled out if the tool wasn't
accessible.
https://bugzilla.redhat.com/show_bug.cgi?id=1072714
Use the "gluster" command line tool to retrieve information about remote
volumes on a gluster server to allow storage pool source lookup.
Unfortunately gluster doesn't provide a management library so that we
could use that directly, instead the RPC calls are hardcoded in the
command line tool.
Commit 5e1d5dd moved the functions using isciadm to util/viriscsi.c,
but ISCSIADM was only defined when the iscsi backend was compiled in.
Define it unconditionally to fix the build (and allow testing
of viriscsi.c) even if iscsi backend is disabled.
configure check for character devices lock path calls
AC_DEFINE_UNQUOTED for VIR_CHRDEV_LOCK_FILE_PATH even if
$with_chrdev_lock_files = "no".
So the locking code in conf/virchrdev.c:
#ifdef VIR_CHRDEV_LOCK_FILE_PATH
is compiled in even if it shouldn't, because VIR_CHRDEV_LOCK_FILE_PATH
is defined as "no", so it tries to create lock files with strange
lock path like 'no/LCK..'.
Fix that by calling AC_DEFINE_UNQUOTED only if $with_chrdev_lock_files
is not 'no'.
Systemd does not forget about the cases, where client service needs to
wait for daemon service to initialize and start accepting new clients.
Setting a dependency in client is not enough as systemd doesn't know
when the daemon has initialized itself and started accepting new
clients. However, it offers a mechanism to solve this. The daemon needs
to call a special systemd function by which the daemon tells "I'm ready
to accept new clients". This is exactly what we need with
libvirtd-guests (client) and libvirtd (daemon). So now, with this
change, libvirt-guests.service is invoked not any sooner than
libvirtd.service calls the systemd notify function.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The previous OOM testing support would re-run the entire "main"
method each iteration, failing a different malloc each time.
When a test suite has 'n' allocations, the number of repeats
requires is (n * (n + 1) ) / 2. This gets very large, very
quickly.
This new OOM testing support instead integrates at the
virtTestRun level, so each individual test case gets repeated,
instead of the entire test suite. This means the values of
'n' are orders of magnitude smaller.
The simple usage is
$ VIR_TEST_OOM=1 ./qemuxml2argvtest
...
29) QEMU XML-2-ARGV clock-utc ... OK
Test OOM for nalloc=36 .................................... OK
30) QEMU XML-2-ARGV clock-localtime ... OK
Test OOM for nalloc=36 .................................... OK
31) QEMU XML-2-ARGV clock-france ... OK
Test OOM for nalloc=38 ...................................... OK
...
the second lines reports how many mallocs have to be failed, and thus
how many repeats of the test will be run.
If it crashes, then running under valgrind will often show the problem
$ VIR_TEST_OOM=1 ../run valgrind ./qemuxml2argvtest
When debugging problems it is also helpful to select an individual
test case
$ VIR_TEST_RANGE=30 VIR_TEST_OOM=1 ../run valgrind ./qemuxml2argvtest
When things get really tricky, it is possible to request that just
specific allocs are failed. eg to fail allocs 5 -> 12, use
$ VIR_TEST_RANGE=30 VIR_TEST_OOM=1:5-12 ../run valgrind ./qemuxml2argvtest
In the worse case, you might want to know the stack trace of the
alloc which was failed then VIR_TEST_OOM_TRACE can be set. If it
is set to 1 then it will only print if it thinks a mistake happened.
This is often not reliable, so setting it to 2 will make it print
the stack trace for every alloc that is failed.
$ VIR_TEST_OOM_TRACE=2 VIR_TEST_RANGE=30 VIR_TEST_OOM=1:5-5 ../run valgrind ./qemuxml2argvtest
30) QEMU XML-2-ARGV clock-localtime ... OK
Test OOM for nalloc=36 !virAllocN
/home/berrange/src/virt/libvirt/src/util/viralloc.c:180
virHashCreateFull
/home/berrange/src/virt/libvirt/src/util/virhash.c:144
virDomainDefParseXML
/home/berrange/src/virt/libvirt/src/conf/domain_conf.c:11745
virDomainDefParseNode
/home/berrange/src/virt/libvirt/src/conf/domain_conf.c:12646
virDomainDefParse
/home/berrange/src/virt/libvirt/src/conf/domain_conf.c:12590
testCompareXMLToArgvFiles
/home/berrange/src/virt/libvirt/tests/qemuxml2argvtest.c:106
virtTestRun
/home/berrange/src/virt/libvirt/tests/testutils.c:250
mymain
/home/berrange/src/virt/libvirt/tests/qemuxml2argvtest.c:418 (discriminator 2)
virtTestMain
/home/berrange/src/virt/libvirt/tests/testutils.c:750
??
??:0
_start
??:?
FAILED
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
At this point it has a limited functionality and is highly
experimental. Supported domain operations are:
* define
* start
* destroy
* dumpxml
* dominfo
It's only possible to have only one disk device and only one
network, which should be of type bridge.
In order to make a client-only build successful on RHEL4 (yes, you
read that correctly!), commit 3ed2e54 modified src/util/virnetdev.c so
that the functional version of virNetDevGetVLanID() was only compiled
if GET_VLAN_VID_CMD was defined. However, it is *never* defined, but
is only an enum value, so the proper version was no longer compiled
even on platforms that support it. This resulted in the vlan tag not
being properly set for guest traffic on VEPA mode guest macvtap
interfaces that were bound to a vlan interface (that's the only place
that libvirt currently uses virNetDevGetVLanID)
Since there is no way to compile conditionally based on the presence
of an enum value, this patch modifies configure.ac to check for said
enum value with AC_CHECK_DECLS(), which #defines
HAVE_DECL_GET_VLAN_VID_CMD to 1 if it's successful compiling a test
program that uses GET_VLAN_VID_CMD (and still #defines it, but to 0,
if it's not successful). We can then make the compilation of
virNetDevGetVLanID() conditional on the value of
HAVE_DECL_GET_VLAN_VID_CMD.
On Fedora 20, with wireshark-devel installed, 'make rpm' failed
due to installed but unpackaged files related to wireshark. As
F20 is already released without wireshark, I chose to add a new
sub-package that is enabled only for F21 and later. Furthermore,
all existing wireshark plugins belong to the wireshark package,
so I got to invent behavior of how the first third-party wireshark
module will behave.
* libvirt.spec.in (with_wireshark): Add new conditional.
* configure.ac (ws-plugindir): Improve wording.
Signed-off-by: Eric Blake <eblake@redhat.com>
virKModConfig() - Return a buffer containing kernel module configuration
virKModLoad() - Load a specific module into the kernel configuration
virKModUnload() - Unload a specific module from the kernel configuration
virKModIsBlacklisted() - Determine whether a module is blacklisted within
the kernel configuration
There are a number of pthreads impls available on Win32
these days, in particular the mingw64 project has a good
impl. Delete the native windows thread implementation and
rely on using pthreads everywhere.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
On Fedora 19 and older the pthreads impl provided with
mingw does not have any pthread_sigmask impl at all. The
configure.ac check was not distinguishing this scenario
from that of a broken pthread_sigmask impl, so was
mistakenly enabling the libvirt workaround even when it
was not needed. This in turn conflicted with the gnulib
provided pthread_sigmask impl.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Trying to run
$ ./configure --prefix=$HOME/usr/libvirt-git
$ make install
results in libvirt trying to install in /usr/lib/wireshark/plugins/....
with predictable amounts of fail. The configure script should not be
hardcoding /usr/lib by default but rather honour $libdir
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
This is useful in certain circumstances, for example when
libvirtd is being executed by FreeBSD rc script, it cannot find
dmidecode installed from FreeBSD ports because it doesn't have
/usr/local (default prefix for ports) in PATH.
Introduce Wireshark dissector plugin which adds support to Wireshark
for dissecting libvirt RPC protocol.
Added following files to build Wireshark dissector from libvirt source
tree.
* tools/wireshark/*: Source tree of Wireshark dissector plugin.
Added followings to configure.ac or Makefile.am.
configure.ac
* --with-wireshark-dissector: Enable support for building Wireshark
dissector.
* --with-ws-plugindir: Specify wireshark plugin directory that dissector
will installed.
* Added tools/wireshark/{Makefile,src/Makefile} to AC_CONFIG_FILES.
Makefile.am
* Added tools/wireshark/ to SUBDIR.
On my Fedora 20 box with mingw cross-compiler, the build failed with:
../../src/rpc/virnetclient.c: In function 'virNetClientSetTLSSession':
../../src/rpc/virnetclient.c:745:14: error: unused variable 'oldmask' [-Werror=unused-variable]
sigset_t oldmask, blockedsigs;
^
I traced it to the fact that mingw64-winpthreads installs a header
that does #define pthread_sigmask(...) 0, which means any argument
only ever passed to pthread_sigmask is reported as unused. This
patch works around the compilation failure, with behavior no worse
than what mingw already gives us regarding the function being a
no-op.
* configure.ac (pthread_sigmask): Probe for broken mingw macro.
* src/util/virutil.h (pthread_sigmask): Rewrite to something that
avoids unused variables.
Signed-off-by: Eric Blake <eblake@redhat.com>
Make it easy to install the shipped examples. The aim is to have
reasonably working templates so that distros only need to minimally
patch these and can feed things upstream more easily.
This was prompted by http://bugs.debian.org/725144
This partially reverts 5eb4b04211 and 62774afb6b.
Rewrite the domsuspend example from scratch. This time do it right.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Old versions of CIL did not understand the 'bool' data type,
but at least 1.7.3 does now cope. We can remove the old hack
which redefined bool and no longer compiles successfully.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Our option '--with-test-suite' could have never worked since it was
defined as AC_ARG_ENABLE([with-test-suite], ...), thus working only as
'--enable-with-test-suite', but documented in configure.ac as
AC_HELP_STRING([--with-test-suite], ...).
In my opinion, the help string is as it should be, but the option is
wrong.
The option has been broken since the introduction in commit 3a2fc27.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
As the python generator scripts are written in python2,
the ./configure script must check for python2 before checking for python
otherwise, on platforms where both python2 and python3 are available and
on which the default python points to python3, ./configure will try to use
the wrong one.
Signed-off-by: Lénaïc Huard <lenaic@lhuard.fr.eu.org>
The domain events demo program isn't really tied to domain
events anymore, so rename it to object events.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
This patch resolves a compile issue caused by the
removal of examples/domsuspend code in commit
5eb4b04211. This issue
is only seen in a fresh checkout, but causes the build
and configure to fail.
We support gluster volumes in domain XML, so we also ought to
support them as a storage pool. Besides, a future patch will
want to take advantage of libgfapi to handle the case of a
gluster device holding qcow2 rather than raw storage, and for
that to work, we need a storage backend that can read gluster
storage volume contents. This sets up the framework.
Note that the new pool is named 'gluster' to match a
<disk type='network'><source protocol='gluster'> image source
already supported in a <domain>; it does NOT match the
<pool type='netfs'><source><target type='glusterfs'>,
since that uses a FUSE mount to a local file name rather than
a network name.
This and subsequent patches have been tested against glusterfs
3.4.1 (available on Fedora 19); there are likely bugs in older
versions that may prevent decent use of gfapi, so this patch
enforces the minimum version tested. A future patch may lower
the minimum. On the other hand, I hit at least two bugs in
3.4.1 that will be fixed in 3.5/3.4.2, where it might be worth
raising the minimum: glfs_readdir is nicer to use than
glfs_readdir_r [1], and glfs_fini should only return failure on
an actual failure [2].
[1] http://lists.gnu.org/archive/html/gluster-devel/2013-10/msg00085.html
[2] http://lists.gnu.org/archive/html/gluster-devel/2013-10/msg00086.html
* configure.ac (WITH_STORAGE_GLUSTER): New conditional.
* m4/virt-gluster.m4: new file.
* libvirt.spec.in (BuildRequires): Support gluster in spec file.
* src/conf/storage_conf.h (VIR_STORAGE_POOL_GLUSTER): New pool
type.
* src/conf/storage_conf.c (poolTypeInfo): Treat similar to
sheepdog and rbd.
(virStoragePoolDefFormat): Don't output target for gluster.
* src/storage/storage_backend_gluster.h: New file.
* src/storage/storage_backend_gluster.c: Likewise.
* po/POTFILES.in: Add new file.
* src/storage/storage_backend.c (backends): Register new type.
* src/Makefile.am (STORAGE_DRIVER_GLUSTER_SOURCES): Build new files.
* src/storage/storage_backend.h (_virStorageBackend): Documet
assumption.
Signed-off-by: Eric Blake <eblake@redhat.com>
The python binding now lives in
http://libvirt.org/git/?p=libvirt-python.git
that repo also provides an RPM which is upgrade compatible
with the old libvirt-python sub-RPM.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The QEMU backend was disabled on Mac OS X without a reason in the code
and due to refactors its difficult to understand when/why it was
disabled. With QEMU being supported on Mac OS X there is no reason to
disable QEMU on this platform.
The libvirt.so library has far too many library deps to allow
linking against it from setuid programs. Those libraries can
do stuff in __attribute__((constructor) functions which is
not setuid safe.
The virt-login-shell needs to link directly against individual
files that it uses, with all library deps turned off except
for libxml2 and libselinux.
Create a libvirt-setuid-rpc-client.la library which is linked
to by virt-login-shell. A config-post.h file allows this library
to disable all external deps except libselinux and libxml2.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
A future patch will allow disabling readline; doing this in an
isolated file instead of configure.ac will make the task easier.
* configure.ac: Move readline code...
* m4/virt-readline.m4: ...here.
Signed-off-by: Eric Blake <eblake@redhat.com>
The automake manual recommends against the use of disabling
maintainer mode by default:
https://www.gnu.org/software/automake/manual/automake.html#maintainer_002dmode
because when it is disabled, the user gets no indication if they
touch a file that would normally require a rebuild. Automake
1.11 changed things so that AM_MAINTAINER_MODE([enable]) will set
the mode to enabled by default; but RHEL 5 still uses automake 1.9,
where AM_MAINTAINER_MODE did not recognize an argument, and
therefore disables maintainer mode by default. Having the default
be different according to which version of automake built the
project is annoying, and I _have_ been bitten on RHEL 5 rebuilds
where the default disabled mode led to silently incorrect builds.
The automake manual admits that being able to disable maintainer
mode still makes sense for projects that still store generated
files from the autotools in version control; but we have dropped
that for several years now. As such, it's finally time to just
ditch the whole idea of maintainer mode, and unconditionally
rebuild autotools files if a dependency changes, without offering
a configure option to disable that mode.
* configure.ac (AM_MAINTAINER_MODE): Drop.
Signed-off-by: Eric Blake <eblake@redhat.com>
I tried to test ./configure --without-lxc --without-remote.
First, the build failed with some odd errors, such as an
inability to build xen, or link failures for virNetTLSInit.
But when you think about it, once there is no remote code,
all of libvirtd is useless, any stateful driver that depends
on libvirtd is also not worth compiling, and any libraries
used only by RPC code are not needed. So I patched
configure.ac to make for some saner defaults when an
explicit disable is attempted. Similarly, since we have
migrated virnetdevbridge into generic code, the workaround
for Linux kernel stupidity must not depend on stateful
drivers being in use.
Then there's 'make check' that needs segregation.
Wow - quite a bit of cleanup to make --without-remote useful :)
* configure.ac: Let --without-remote toggle defaults on stateful
drivers and other libraries. Pick up Linux kernel workarounds
even when qemu and lxc are not being compiled.
* tests/Makefile.am (test_programs): Factor out programs that
require remote.
* src/libvirt_private.syms (rpc/virnet*.h): Move...
* src/libvirt_remote.syms: ...into new file.
* src/Makefile.am (SYM_FILES): Ship new syms file.
Signed-off-by: Eric Blake <eblake@redhat.com>
Fixed the safezero call for allocating the rest of the file after cloning
an existing volume; it used to always use a zero offset, causing it to
only allocate the beginning of the file.
Also modified file creation to try to use fallocate(2) to pre-allocate
disk space before copying any data to make sure it fails early on if disk
is full and makes sure we can skip zero blocks when copying file contents.
If fallocate isn't available we will zero out the rest of the file after
cloning and only use sparse cloning if client requested a lower allocation
than the input volume's capacity.
Signed-off-by: Oskari Saarenmaa <os@ohmu.fi>
With the existing pkcheck (pid, start time) tuple for identifying
the process, there is a race condition, where a process can make
a libvirt RPC call and in another thread exec a setuid application,
causing it to change to effective UID 0. This in turn causes polkit
to do its permission check based on the wrong UID.
To address this, libvirt must get the UID the caller had at time
of connect() (from SO_PEERCRED) and pass a (pid, start time, uid)
triple to the pkcheck program.
This fix requires that libvirt is re-built against a version of
polkit that has the fix for its CVE-2013-4288, so that libvirt
can see 'pkg-config --variable pkcheck_supports_uid polkit-gobject-1'
Signed-off-by: Colin Walters <walters@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Commit f92c7e3 fixed a regression for native builds, but introduced
a regression for cross-compilation builds; in particular,
./autobuild.sh on a Fedora system with mingw cross-compiler fails
with:
checking for qemu-kvm... /usr/bin/qemu-kvm
checking for yajl_parse_complete in -lyajl... no
checking for yajl_tree_parse in -lyajl... no
configure: error: You must install the libyajl library & headers to compile libvirt
Since we default $with_qemu to 'yes' rather than 'check', and then
flip that default based on platform-specific checks, those platform
specifics need to come prior to any library checks that depend on
the value of $with_qemu.
* configure.ac: Ensure system defaults are sane before checking
for things that make decisions based on system default.
Signed-off-by: Eric Blake <eblake@redhat.com>
Bother those kernel developers. In the latest rawhide, kernel
and glibc have now been unified so that <netinet/in.h> and
<linux/in6.h> no longer clash; but <linux/if_bridge.h> is still
not self-contained. Because of the latest header change, the
build is failing with:
checking for linux/param.h... no
configure: error: You must install kernel-headers in order to compile libvirt with QEMU or LXC support
with details:
In file included from conftest.c:561:0:
/usr/include/linux/in6.h:71:18: error: field 'flr_dst' has incomplete type
struct in6_addr flr_dst;
We need a workaround to avoid our workaround :)
* configure.ac (NETINET_LINUX_WORKAROUND): New test.
* src/util/virnetdevbridge.c (includes): Use it.
Signed-off-by: Eric Blake <eblake@redhat.com>
Commits 9298bfb and f6c2951 both tried to make it possible to
select the correct libnl (1 vs. 3) according to what netcf
used, when both libraries are installed. This works to avoid
libnl-3 when netcf used libnl-1. But on the converse side, if
only libnl-1 development code is installed, while netcf uses
libnl-3, then configure happily uses libnl-1 anyways, leading
to a test failure:
$ VIR_TEST_DEBUG=1 ./virdrivermoduletest
TEST: virdrivermoduletest
1) Test driver "network" ... OK
2) Test driver "storage" ... OK
3) Test driver "nodedev" ... OK
4) Test driver "secret" ... OK
5) Test driver "nwfilter" ... OK
6) Test driver "interface"
... lt-virdrivermoduletest: route/tc.c:973: rtnl_tc_register: Assertion
`0' failed.
Aborted
It's much nicer to prevent this at configure time, by requiring that
if we know what netcf used, then we want the same libnl version. As
before, this can be bypassed by someone who knows what they are doing
by setting LIBNL_CFLAGS (perhaps useful to the rare person where the
build box has a different version of netcf than the installation box).
* configure.ac (LIBNL): If we can prove netcf used libnl-3, then
don't let configure succeed with libnl-1.
Signed-off-by: Eric Blake <eblake@redhat.com>
Jonathan Lebon reported an issue to me off-list about his build
failing to use qemu because he failed to install yajl-devel. But
I recalled specifically tweaking configure.ac to die in that
situation (commits 350583c, ba9c38b). After a bit more
head-scratching, we found the cause of the regression: commit
654c709 rearranged things so that the qemu version check now
occurs before AC_ARG_WITH has had a chance to set either
$with_qemu or $with_yajl.
Coincidentally, this fix aligns with a documentation patch that
was just posted to the autoconf mailing list :)
http://thread.gmane.org/gmane.comp.sysutils.autoconf.patches/8324
* m4/virt-lib.m4 (LIBVIRT_CHECK_LIB, LIBVIRT_CHECK_LIB_ALT)
(LIBVIRT_CHECK_PKG): Populate defaults earlier.
* configure.ac (AC_ARG_WITH): Likewise for drivers.
Signed-off-by: Eric Blake <eblake@redhat.com>
Autoconf states that AC_HELP_STRING is obsolete, and that new
programs should use AS_HELP_STRING. We also had instances of
not properly quoting the macro usage, and not relying on autoconf's
word-wrapping abilities to avoid long lines. I validated that this
commit has no impact to the generated configure file.
* configure.ac (AC_ARG_WITH, AC_ARG_ENABLE): Autoconf recommends
the use of AS_HELP_STRING. Also, use proper quoting and wrap long
lines.
* m4/virt-apparmor.m4 (LIBVIRT_CHECK_APPARMOR): Likewise.
* m4/virt-selinux.m4 (LIBVIRT_CHECK_SELINUX): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
Automake 2.0 will enable subdir-objects by default; in preparation
for that change, automake 1.14 outputs LOADS of warnings:
daemon/Makefile.am:38: warning: source file '../src/remote/remote_protocol.c' is in a subdirectory,
daemon/Makefile.am:38: but option 'subdir-objects' is disabled
automake-1.14: warning: possible forward-incompatibility.
automake-1.14: At least a source file is in a subdirectory, but the 'subdir-objects'
automake-1.14: automake option hasn't been enabled. For now, the corresponding output
automake-1.14: object file(s) will be placed in the top-level directory. However,
automake-1.14: this behaviour will change in future Automake versions: they will
automake-1.14: unconditionally cause object files to be placed in the same subdirectory
automake-1.14: of the corresponding sources.
automake-1.14: You are advised to start using 'subdir-objects' option throughout your
automake-1.14: project, to avoid future incompatibilities.
daemon/Makefile.am:38: warning: source file '../src/remote/lxc_protocol.c' is in a subdirectory,
daemon/Makefile.am:38: but option 'subdir-objects' is disabled
...
As automake 1.9 also supported this option, and the previous patches
fixed up the code base to work with it, it is safe to now turn it on
unconditionally.
* configure.ac (AM_INIT_AUTOMAKE): Enable subdir-objects.
* .gitignore: Ignore .dirstamp directories.
* src/Makefile.am (PDWTAGS, *-protocol-struct): Adjust to
new subdir-object location of .lo files.
Signed-off-by: Eric Blake <eblake@redhat.com>
I'm tired of seeing screenfuls of messages like these when using
automake 1.13 (Fedora 19):
configure.ac:2121: warning: The 'AM_PROG_MKDIR_P' macro is deprecated, and its use is discouraged.
configure.ac:2121: You should use the Autoconf-provided 'AC_PROG_MKDIR_P' macro instead,
configure.ac:2121: and use '$(MKDIR_P)' instead of '$(mkdir_p)'in your Makefile.am files.
daemon/Makefile.am:19: warning: 'INCLUDES' is the old name for 'AM_CPPFLAGS' (or '*_CPPFLAGS')
seeing as how we MUST use those constructs for the benefit of
automake 1.9 (RHEL 5). Conversely, RHEL 5 automake complained:
aclocal:configure.ac:36: warning: macro `AM_SILENT_RULES' not found in library
Obviously, I tested this patch on both Fedora 19 and RHEL 5.
* configure.ac (AM_INIT_AUTOMAKE): Avoid obsoletion warnings.
(AM_SILENT_RULES): Avoid unknown macro warning.
Signed-off-by: Eric Blake <eblake@redhat.com>
This patch changes virFileLoopDeviceOpen() to use the new loop-control
device to allocate a new loop device. If this behavior is unsupported
we fall back to the previous method of searching /dev for a free device.
With this patch you can start as many image based LXC domains as you
like (well almost).
Fixes bug https://bugzilla.redhat.com/show_bug.cgi?id=995543
The gnulib testsuite is relatively stable - the only times it is
likely to have a test change from pass to fail is on a gnulib
submodule update or a major system change (such as moving from
Fedora 18 to 19, or other large change to libc). While it is an
important test for end users on arbitrary machines (to make sure
that the portability glue works for their machine), it mostly
wastes time for development testing (as most developers aren't
making any of the major changes that would cause gnulib tests
to alter behavior). Thus, it pays to make the tests optional
at configure time, defaulting to off for development, on for
tarballs, with autobuilders requesting it to be on. It also
helps to allow a make-time override, via VIR_TEST_EXPENSIVE=[01]
(much the way automake sets up V=[01] for overriding the configure
time default of how verbose to be).
Automake has some pretty hard-coded magic with regards to the
TESTS variable; I had quite a job figuring out how to keep
'make distcheck' passing regardless of the configure option
setting in use, while still disabling the tests at runtime
when I did not configure them on and did not use the override
variable. Thankfully, we require GNU make, which lets me
hide some information from Automake's magic handling of TESTS.
* bootstrap.conf (bootstrap_epilogue): Munge gnulib test variable.
* configure.ac (--enable-expensive-tests): Add new enable switch.
(VIR_TEST_EXPENSIVE_DEFAULT, WITH_EXPENSIVE_TESTS): Set new
witnesses.
* gnulib/tests/Makefile.am (TESTS): Make tests conditional on
configure settings and the VIR_TEST_EXPENSIVE variable.
* tests/Makefile.am (TESTS_ENVIRONMENT): Expose VIR_TEST_EXPENSIVE
to all tests.
* autobuild.sh: Enable all tests during autobuilds.
* libvirt.spec.in (%configure): Likewise.
* mingw-libvirt.spec.in (%mingw_configure): Likewise.
* docs/hacking.html.in: Document the option.
* HACKING: Regenerate.
Signed-off-by: Eric Blake <eblake@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=951637
Newer gnutls uses nettle, rather than gcrypt, which is a lot nicer
regarding initialization. Yet we were unconditionally initializing
gcrypt even when gnutls wouldn't be using it, and having two crypto
libraries linked into libvirt.so is pointless, but mostly harmless
(it doesn't crash, but does interfere with certification efforts).
There are three distinct version ranges to worry about when
determining which crypto lib gnutls uses, per these gnutls mails:
2.12: http://lists.gnu.org/archive/html/gnutls-devel/2011-03/msg00034.html
3.0: http://lists.gnu.org/archive/html/gnutls-devel/2011-07/msg00035.html
If pkg-config can prove version numbers and/or list the crypto
library used for static linking, we have our proof; if not, it
is safer (even if pointless) to continue to use gcrypt ourselves.
* configure.ac (WITH_GNUTLS): Probe whether to add -lgcrypt, and
define a witness WITH_GNUTLS_GCRYPT.
* src/libvirt.c (virTLSMutexInit, virTLSMutexDestroy)
(virTLSMutexLock, virTLSMutexUnlock, virTLSThreadImpl)
(virGlobalInit): Honor the witness.
* libvirt.spec.in (BuildRequires): Make gcrypt usage conditional,
no longer needed in Fedora 19.
Signed-off-by: Eric Blake <eblake@redhat.com>
This is a second attempt at fixing the problem first attempted
in commit 2df8d99; basically undoing the fact that it was
reverted in commit 43cee32f, plus fixing two more issues: the
code in configure.ac has to EXACTLY match virnetdevbridge.c
with regards to declaring in6 types before using if_bridge.h,
and the fact that RHEL 5 has even more conflicts:
In file included from util/virnetdevbridge.c:49:
/usr/include/linux/in6.h:47: error: conflicting types for 'in6addr_any'
/usr/include/netinet/in.h:206: error: previous declaration of 'in6addr_any' was here
/usr/include/linux/in6.h:49: error: conflicting types for 'in6addr_loopback'
/usr/include/netinet/in.h:207: error: previous declaration of 'in6addr_loopback' was here
The rest of this commit message borrows from the original try
of 2df8d99:
A fresh checkout on a RHEL 6 machine with these packages:
kernel-headers-2.6.32-405.el6.x86_64
glibc-2.12-1.128.el6.x86_64
failed to configure with this message:
checking for linux/if_bridge.h... no
configure: error: You must install kernel-headers in order to compile libvirt with QEMU or LXC support
Digging in config.log, we see that the problem is identical to
what we fixed earlier in commit d12c2811:
configure:98831: checking for linux/if_bridge.h
configure:98853: gcc -std=gnu99 -c -g -O2 conftest.c >&5
In file included from /usr/include/linux/if_bridge.h:17,
from conftest.c:559:
/usr/include/linux/in6.h:31: error: redefinition of 'struct in6_addr'
/usr/include/linux/in6.h:48: error: redefinition of 'struct sockaddr_in6'
/usr/include/linux/in6.h:56: error: redefinition of 'struct ipv6_mreq'
configure:98860: $? = 1
I had not hit it earlier because I was using incremental builds,
where config.cache had shielded me from the kernel-headers breakage.
* configure.ac (if_bridge.h): Avoid conflicting type definitions.
* src/util/virnetdevbridge.c (includes): Also sanitize for RHEL 5.
Signed-off-by: Eric Blake <eblake@redhat.com>
A fresh checkout on a RHEL 6 machine with these packages:
kernel-headers-2.6.32-405.el6.x86_64
glibc-2.12-1.128.el6.x86_64
failed to configure with this message:
checking for linux/if_bridge.h... no
configure: error: You must install kernel-headers in order to compile libvirt with QEMU or LXC support
Digging in config.log, we see that the problem is identical to
what we fixed earlier in commit d12c2811:
configure:98831: checking for linux/if_bridge.h
configure:98853: gcc -std=gnu99 -c -g -O2 conftest.c >&5
In file included from /usr/include/linux/if_bridge.h:17,
from conftest.c:559:
/usr/include/linux/in6.h:31: error: redefinition of 'struct in6_addr'
/usr/include/linux/in6.h:48: error: redefinition of 'struct sockaddr_in6'
/usr/include/linux/in6.h:56: error: redefinition of 'struct ipv6_mreq'
configure:98860: $? = 1
I had not hit it earlier because I was using incremental builds,
where config.cache had shielded me from the kernel-headers breakage.
* configure.ac (if_bridge.h): Avoid conflicting type definitions.
Signed-off-by: Eric Blake <eblake@redhat.com>
Autoconf 2.59 says that AC_OUTPUT with arguments is obsolete,
and we are already using the replacement for some, but not all,
of our output files.
* configure.ac (AC_OUTPUT): Rewrite to use AC_CONFIG_FILES.
Signed-off-by: Eric Blake <eblake@redhat.com>
The python/tests directory contains a number of so called
"tests" for the python API. These are all hardcoded to
look for Xen and cannot be run in any automated fashion,
and no one is ever manually running them. Given that they
don't meaningully contribute to the test coverage, delete
them.
For some reason these tests were also copied into the
filesystem as part of 'make install'. The change to the
RPM in commit 3347a42032
caused a build failure, since it removed the code which
deleted these installed tests.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
link_addr detection in configure always reports that
link_addr is missing because it uses link_addr(NULL, NULL) in
AC_LINK_IFELSE check with limited set of headers that doesn't
define NULL.
Fix by replacing 'NULL' with just '0'.
Some versions of kFreeBSD (like 9.0) declare link_addr in a header
but lack an implementation. This makes ./configure pass but breaks
compilation later with a
undefined reference to `link_addr'
Althought that's a bug in the OS header we can detect it easily by also
trying to link.
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=715320
https://bugzilla.redhat.com/show_bug.cgi?id=964358
POSIX states that multi-threaded apps should not use functions
that are not async-signal-safe between fork and exec, yet we
were using getpwuid_r and initgroups. Although rare, it is
possible to hit deadlock in the child, when it tries to grab
a mutex that was already held by another thread in the parent.
I actually hit this deadlock when testing multiple domains
being started in parallel with a command hook, with the following
backtrace in the child:
Thread 1 (Thread 0x7fd56bbf2700 (LWP 3212)):
#0 __lll_lock_wait ()
at ../nptl/sysdeps/unix/sysv/linux/x86_64/lowlevellock.S:136
#1 0x00007fd5761e7388 in _L_lock_854 () from /lib64/libpthread.so.0
#2 0x00007fd5761e7257 in __pthread_mutex_lock (mutex=0x7fd56be00360)
at pthread_mutex_lock.c:61
#3 0x00007fd56bbf9fc5 in _nss_files_getpwuid_r (uid=0, result=0x7fd56bbf0c70,
buffer=0x7fd55c2a65f0 "", buflen=1024, errnop=0x7fd56bbf25b8)
at nss_files/files-pwd.c:40
#4 0x00007fd575aeff1d in __getpwuid_r (uid=0, resbuf=0x7fd56bbf0c70,
buffer=0x7fd55c2a65f0 "", buflen=1024, result=0x7fd56bbf0cb0)
at ../nss/getXXbyYY_r.c:253
#5 0x00007fd578aebafc in virSetUIDGID (uid=0, gid=0) at util/virutil.c:1031
#6 0x00007fd578aebf43 in virSetUIDGIDWithCaps (uid=0, gid=0, capBits=0,
clearExistingCaps=true) at util/virutil.c:1388
#7 0x00007fd578a9a20b in virExec (cmd=0x7fd55c231f10) at util/vircommand.c:654
#8 0x00007fd578a9dfa2 in virCommandRunAsync (cmd=0x7fd55c231f10, pid=0x0)
at util/vircommand.c:2247
#9 0x00007fd578a9d74e in virCommandRun (cmd=0x7fd55c231f10, exitstatus=0x0)
at util/vircommand.c:2100
#10 0x00007fd56326fde5 in qemuProcessStart (conn=0x7fd53c000df0,
driver=0x7fd55c0dc4f0, vm=0x7fd54800b100, migrateFrom=0x0, stdin_fd=-1,
stdin_path=0x0, snapshot=0x0, vmop=VIR_NETDEV_VPORT_PROFILE_OP_CREATE,
flags=1) at qemu/qemu_process.c:3694
...
The solution is to split the work of getpwuid_r/initgroups into the
unsafe portions (getgrouplist, called pre-fork) and safe portions
(setgroups, called post-fork).
* src/util/virutil.h (virSetUIDGID, virSetUIDGIDWithCaps): Adjust
signature.
* src/util/virutil.c (virSetUIDGID): Add parameters.
(virSetUIDGIDWithCaps): Adjust clients.
* src/util/vircommand.c (virExec): Likewise.
* src/util/virfile.c (virFileAccessibleAs, virFileOpenForked)
(virDirCreate): Likewise.
* src/security/security_dac.c (virSecurityDACSetProcessLabel):
Likewise.
* src/lxc/lxc_container.c (lxcContainerSetID): Likewise.
* configure.ac (AC_CHECK_FUNCS_ONCE): Check for setgroups, not
initgroups.
Signed-off-by: Eric Blake <eblake@redhat.com>
In order to properly detect bridge related definitions such as
BRDGSFD, BRDGADD and BRDGDEL on kFreeBSD we need to include
<stdint.h>.
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=715321
Reported by Laurent Bigonville.
Building with gnutls 3.2.0 (such as shipped with current cygwin) fails
with:
rpc/virnettlscontext.c: In function 'virNetTLSSessionGetKeySize':
rpc/virnettlscontext.c:1358:5: error: implicit declaration of function 'gnutls_cipher_get_key_size' [-Wimplicit-function-declaration]
Yeah, it's stupid that gnutls broke API by moving their declaration
into a new header without including that header from the old one,
but it's easy enough to work around, all without breaking on gnutls
1.4.1 (hello RHEL 5) that lacked the new header.
* configure.ac (gnutls): Check for <gnutls/crypto.h>.
* src/rpc/virnettlscontext.c (includes): Include additional header.
Signed-off-by: Eric Blake <eblake@redhat.com>
https://www.gnu.org/licenses/gpl-howto.html states:
You should also include a copy of the license itself somewhere in the
distribution of your program. All programs, whether they are released
under the GPL or LGPL, should include the text version of the GPL. In
GNU programs the license is usually in a file called COPYING.
If you are releasing your program under the LGPL, you should also
include the text version of the LGPL, usually in a file called
COPYING.LESSER. Please note that, since the LGPL is a set of
additional permissions on top of the GPL, it's important to include
both licenses so users have all the materials they need to understand
their rights.
* configure.ac (COPYING): No more games with non-git file.
* COPYING: New file, copied from gnulib.
* COPYING.LIB: Rename...
* COPYING.LESSER: ...to this.
* .gitignore: Track licenses in git.
* cfg.mk (exclude_file_name_regexp--sc_copyright_address): Tweak
rule.
* libvirt.spec.in (daemon, client, python): Reflect rename.
Signed-off-by: Eric Blake <eblake@redhat.com>
Clang does not like the -export-dynamic flag. The compiler does
not need it in the first place, so we can avoid the problem by
only setting it for the linker
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
When combining old gcc (4.2.1) and new gcrypt (1.5.2), such as
when using the Ports repository on FreeBSD, the build fails with:
CC libvirt_driver_la-libvirt.lo
cc1: warnings being treated as errors
In file included from libvirt.c:58:
/usr/local/include/gcrypt.h:1336: warning: 'gcry_ac_io_mode_t' is deprecated [-Wdeprecated-declarations]
Relevant part of gcrypt.h:
1333 typedef struct gcry_ac_io
1334 {
1335 /* This is an INTERNAL structure, do NOT use manually. */
1336 gcry_ac_io_mode_t mode _GCRY_ATTR_INTERNAL;
1337 gcry_ac_io_type_t type _GCRY_ATTR_INTERNAL;
1338 union
The sad part is that we aren't even using the deprecated symbols - their
mere inclusion in the installed header is provoking the problems. It
looks like newer gcc is a bit more tolerant (that is, this is a
shortcoming of FreeBSD's use of an older compiler).
Signed-off-by: Eric Blake <eblake@redhat.com>
- provide virNetDevSetMAC() implementation based on SIOCSIFLLADDR
ioctl.
- adjust virNetDevExists() to check for ENXIO error because
FreeBSD throws it when device doesn't exist
Signed-off-by: Eric Blake <eblake@redhat.com>
FreeBSD (and maybe other BSDs) have different member
names in struct ifreq when compared to Linux, such as:
- uses ifr_data instead of ifr_newname for setting
interface names
- uses ifr_index instead of ifr_ifindex for interface
index
Also, add a check for SIOCGIFHWADDR for virNetDevValidateConfig().
Use AF_LOCAL if AF_PACKET is not available.
Signed-off-by: Eric Blake <eblake@redhat.com>
This patch adds two sets of functions:
1) lower level virProcessSet*() functions that will immediately set
the RLIMIT_MEMLOCK. RLIMIT_NPROC, or RLIMIT_NOFILE of either the
current process (using setrlimit()) or any other process (using
prlimit()). "current process" is indicated by passing a 0 for pid.
2) functions for virCommand* that will setup a virCommand object to
set those limits at a later time just after it has forked a new
process, but before it execs the new program.
configure.ac has prlimit and setrlimit added to the list of functions
to check for, and the low level functions log an "unsupported" error)
on platforms that don't support those functions.
Add a virCgroupIsolateMount method which looks at where the
current process is place in the cgroups (eg /system/demo.lxc.libvirt)
and then remounts the cgroups such that this sub-directory
becomes the root directory from the current process' POV.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
On Win32 symlink() is not available, so virstoragetest.c
must be conditionalized to avoid compile failures.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
By passing the flags -z relro -z now to the linker, we can force
it to resolve all library symbols at startup, instead of on-demand.
This allows it to then make the global offset table (GOT) read-only,
which makes some security attacks harder.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
PIE (position independent executable) adds security to executables
by composing them entirely of position-independent code (PIC. The
.so libraries already build with -fPIC. This adds -fPIE which is
the equivalent to -fPIC, but for executables. This for allows Exec
Shield to use address space layout randomization to prevent attackers
from knowing where existing executable code is during a security
attack using exploits that rely on knowing the offset of the
executable code in the binary, such as return-to-libc attacks.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Every source file is currently built twice by libtool, once for
the shared library and once for the static library. Static libs
are not commonly packaged by distros and slow down compilation
time by more than 50% compared to a shared-only build time.
Time for 'make -j 4':
shared only: 2 mins 9 secs
shared + static: 3 mins 26 secs
Time for non-parallel make
shared only: 3 mins 32 secs
shared + static: 5 mins 41 secs
Those few people who really want them, can pass --enable-static
to configure
Disabling them by default requires use of LT_INIT, but for
compat with RHEL5 we can't rely on that. So we conditionally
use LT_INIT, but fallback to AM_PROG_LIBTOOL if not present.
Commit c308a9ae was incomplete; it resolved the configure failure,
but not a later build failure.
* src/util/virnetdevbridge.c: Include pre-req header.
* configure.ac (AC_CHECK_HEADERS): Prefer standard in.h over
non-standard ip6.h.
Some places missed the conversion from LIBCURL_{CFLAGS,LIBS} to
CURL_{CFLAGS,LIBS}, and a part of curl check was left in
configure.ac instead of m4/virt-curl.m4 by mistake
I got this scary warning during ./configure on rawhide:
checking linux/if_bridge.h usability... no
checking linux/if_bridge.h presence... yes
configure: WARNING: linux/if_bridge.h: present but cannot be compiled
configure: WARNING: linux/if_bridge.h: check for missing prerequisite headers?
configure: WARNING: linux/if_bridge.h: see the Autoconf documentation
configure: WARNING: linux/if_bridge.h: section "Present But Cannot Be Compiled"
configure: WARNING: linux/if_bridge.h: proceeding with the compiler's result
configure: WARNING: ## ------------------------------------- ##
configure: WARNING: ## Report this to libvir-list@redhat.com ##
configure: WARNING: ## ------------------------------------- ##
checking for linux/if_bridge.h... no
* configure.ac (AC_CHECK_HEADERS): Provide struct in6_addr, since
linux/if_bridge.h uses it without declaring it.
This patch introduces support for LXC specific public APIs. In
common with what was done for QEMU, this creates a libvirt_lxc.so
library and libvirt/libvirt-lxc.h header file.
The actual APIs are
int virDomainLxcOpenNamespace(virDomainPtr domain,
int **fdlist,
unsigned int flags);
int virDomainLxcEnterNamespace(virDomainPtr domain,
unsigned int nfdlist,
int *fdlist,
unsigned int *noldfdlist,
int **oldfdlist,
unsigned int flags);
which provide a way to use the setns() system call to move the
calling process into the container's namespace. It is not
practical to write in a generically applicable manner. The
nearest that we could get to such an API would be an API which
allows to pass a command + argv to be executed inside a
container. Even if we had such a generic API, this LXC specific
API is still useful, because it allows the caller to maintain
the current process context, in particular any I/O streams they
have open.
NB the virDomainLxcEnterNamespace() API is special in that it
runs client side, so does not involve the internal driver API.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
There are many aspects of the guest XML which result in the
SELinux driver applying file labelling. With the increasing
configuration options it is desirable to test this behaviour.
It is not possible to assume that the test suite has the
ability to set SELinux labels. Most filesystems though will
support extended attributes. Thus for the purpose of testing,
it is possible to extend the existing LD_PRELOAD hack to
override setfilecon() and getfilecon() to simply use the
'user.libvirt.selinux' attribute for the sake of testing.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
This converts the libssh2 configure check to use LIBVIRT_CHECK_PKG.
Previously it would check version 1.0 and 1.3, but this simplifies
things to just require version 1.3
I ran 'make dist' in the directory left over from ./autobuild.sh
(which was configured for a mingw cross build); the resulting
tarball had more files than 'make dist' on a normal Linux build.
I traced it to the fact that we were distributing a generated
file, but only when configure said the end user had to generate
the file in the first place. In the process, I noticed that
we had some difference in symbol file names; I added a comment
explaining why the difference exists (after first trying to
normalize the names and hitting VPATH build failures).
* configure.ac (LIBVIRT_QEMU_SYMBOL_FILE): Add some comments.
* src/Makefile.am (EXTRA_DIST): No need to ship a generated file;
particularly since which file is built depends on configure results.
