The _virDomainMemoryDef structure has @uuid member which is
needed for PPC64 guests. No other architectures use it. Since the
member is VIR_UUID_BUFLEN bytes long, the structure is
unnecessary big. If the member is just a pointer then we can also
replace some calls of virUUIDIsValid() with plain test against
NULL and also simplify formatter code which can now also check
the pointer against NULL.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Now we have everything prepared for generating the command line.
The device alias prefix was chosen to be 'virtiopmem'.
Since virtio-pmem-pci device goes onto PCI bus generating device
alias must have been changed slightly because
qemuAssignDeviceMemoryAlias() might have used DIMM slot number to
generate the alias. This obviously won't work and thus the "old"
way (which includes qemuDomainDeviceAliasIndex()) must be used.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1735375
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Some users might want to have virtio-pmem backed by a block device
in which case we have to create the device in the domain private
namespace.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Some users might want to have virtio-pmem backed by a block
device in which case we have to allow the device in CGroups.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The virtio-pmem is a virtio variant of NVDIMM and just like
NVDIMM virtio-pmem also allows accessing host pages bypassing
guest page cache. The difference is that if a regular file is
used to back guest's NVDIMM (model='nvdimm') the persistence of
guest writes might not be guaranteed while with virtio-pmem it
is.
To express this new model at domain XML level, I've chosen the
following:
<memory model='virtio-pmem' access='shared'>
<source>
<path>/tmp/virtio_pmem</path>
</source>
<target>
<size unit='KiB'>524288</size>
</target>
<address type='pci' domain='0x0000' bus='0x00' slot='0x05' function='0x0'/>
</memory>
Another difference between NVDIMM and virtio-pmem is that while
the former supports NUMA node locality the latter doesn't. And
also, the latter goes onto PCI bus and not into a DIMM module.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
This commit introduces a new capability that reflects virtio-pmem-pci
device support in qemu:
QEMU_CAPS_DEVICE_VIRTIO_PMEM_PCI, /* -device virtio-pmem-pci */
The virtio-pmem-pci device was introduced in QEMU 4.1.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
managed='no' on an <interface> allows an unprivileged libvirt to use a
pre-created tap/macvtap device that libvirt has permission to
open/read/write, but no permission to modify (i.e. set the MTU or MAC
address). But when the XML had an <mtu size='blah'/> setting (which
was put there in order to tell the *guest* OS what MTU to set for the
emulated device at the other end of the tap) we were attempting to set
the MTU of the tap device on the host, paying no attention to the
setting of 'managed'. That would of course end in failure.
This patch only sets the MTU if managed='no' is *not* set (so, if it
is 'yes', or just not set at all).
Note that MTU of the tap is also set when connecting the tap to a
bridge device, but managed='no' is only allowed for <interface
type='ethernet'>, which would never attach to a bridge anyway, so we
don't need the check there.
Resolves: https://bugzilla.redhat.com/1905929
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Depending on the memballoon model, the corresponding QOM node
will have a different type and we need to account for this
when searching for it in the QOM tree.
https://bugzilla.redhat.com/show_bug.cgi?id=1911786
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
When a block job is terminated we should clear the 'mirrorState' and
'mirrorJob' variables so that stale values are not present prior to a
new job.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use the per-job state to determine when the non-shared-storage mirror is
complete rather than the per-disk definition one. The qemuBlockJobData
is a newer approach and is always cleared after the blockjob is
terminated while the 'mirrorState' variable in the definition of the
disk may be left over. In such case the disk mirror would be considered
complete prematurely.
https://bugzilla.redhat.com/show_bug.cgi?id=1889131
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Now that this function can be called regardless of interface type (and
whether or not we have a conn for the network driver), let's actually
call it for all interface types. This will assure that we re-connect
any disconnected bridge devices for <interface type='bridge'> as
mentioned in https://bugzilla.redhat.com/show_bug.cgi?id=1730084#c26
(until now we've only been reconnecting bridge devices for <interface
type='network'>)
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
qemu's qcow2 driver allows control of the metadata cache of qcow2 driver
by the 'cache-size' property. Wire it up to the recently introduced
elements.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Implement support for the 'nfs' native protocol driver in the qemu
driver.
QEMU accepts numeric UID/GID for 'nfs' protocol file driver thus libvirt
needs to perform the lookup prior to passing it to qemu.
Signed-off-by: Ryan Gahagan <rgahagan@cs.utexas.edu>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Similarly to startup of the VM qemu doesn't like setting throttling for
an empty drive. Just skip it since we do the correct thing once new
media is inserted.
Resolves: https://gitlab.com/libvirt/libvirt/-/issues/117
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Tested-by: Han Han <hhan@redhat.com>
The monitor code uses 'flags' for the flags of the monitor builder,
while in this function it's a different set of flags. All callers pass a
variable named 'cdevflags', so rename the argument to suit.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Remove freeing/clearing of @props as the function doesn't guarantee that
it happens on success, rename the variable hodling copy of the alias and
use g_autofree to automatically free it and remove the cleanup label as
well as 'ret' variable.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The callers of qemuMonitorAddObject rely on the fact that @alias is
filled only when the object is added successfully. This is documented
but the code didn't behave like that.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
All callers of qemuMonitorJSONMakeCommandInternal will benefit from
making @arguments a double pointer and passing it to
virJSONValueObjectCreate directly which will clear it if it steals the
value.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Prepare for a refactor of qemuMonitorJSONMakeCommandInternal.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use automatic memory freeing and remove the 'cleanup' label and 'ret'
variable.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This allows simplification of the caller as well as will enable a later
refactor of qemuMonitorJSONMakeCommandInternal.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The @fds member of qemuMonitorFdsetInfo struct is an array and as
such, it's allocated in qemuMonitorJSONQueryFdsetsParse() but not
freed in qemuMonitorFdsetsFree().
Fixes: b8998cc670
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Fixes compiler error:
src/qemu/qemu_migration.c:4814:20: error: ‘dstOffline’ may be used
uninitialized in this function [-Werror=maybe-uninitialized]
4814 | if (offline && !dstOffline) {
The commit that introduced the error:
910b94df: qemu: adopt to VIR_DRV_SUPPORTS_FEATURE return -1
Signed-off-by: Nick Shyrokovskiy <nshyrokovskiy@gmail.com>
Changes to a virtio network device such as
<interface type="network">
<model type="virtio"/>
<driver iommu="on" ats="on"/> <!-- this line added -->
...
</interface>
were quietly dismissed by `virsh update-device ... --live`.
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Otherwise in some places we can mistakenly report 'unsupported' error instead
of root cause. So let's handle root cause explicitly from the macro.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
When an interface has some bandwidth limitation set (it's root
qdisc is htb in that case) but this gets cleared out via public
API call (virDomainSetInterfaceParameters() or
virDomainUpdateDeviceFlags()) then virNetDevBandwidthSet() clears
out whatever qdiscs were set on the interface and kernel places
the default qdisc at the root. What we need to do next is to
replace the root qdisc with the one we want.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1329644
Fixes: 0b66196d86
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
While the code that's setting default qdisc is clever enough to
not overwrite any bandwidth (potentially) set by
virNetDevBandwidthSet() (and thus the root qdisc htb is not
replaced with noqueue), it does print a debug message when that's
the case. It's needless. We can set the root qdisc beforehand and
let virNetDevBandwidthSet() overwrite it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Some secdrivers (typically SELinux driver) generate unique
dynamic seclabel for each domain (unless a static one is
requested in domain XML). This is achieved by calling
qemuSecurityGenLabel() from qemuProcessPrepareDomain() which
allocates unique seclabel and stores it in domain def->seclabels.
The counterpart is qemuSecurityReleaseLabel() which releases the
label and removes it from def->seclabels. Problem is, that with
current code the qemuProcessStop() may still want to use the
seclabel after it was released, e.g. when it wants to restore the
label of a disk mirror.
What is happening now, is that in qemuProcessStop() the
qemuSecurityReleaseLabel() is called, which removes the SELinux
seclabel from def->seclabels, yada yada yada and eventually
qemuSecurityRestoreImageLabel() is called. This bubbles down to
virSecuritySELinuxRestoreImageLabelSingle() which find no SELinux
seclabel (using virDomainDefGetSecurityLabelDef()) and this
returns early doing nothing.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1751664
Fixes: 8fa0374c5b
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
All these headers are indirectly included provided by virfile.h having
virstoragefile.h which will be removed in the following patch.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Currently, swtpm TPM state file is removed when a transient domain is
powered off or undefined. When we store TPM state on a shared storage
such as NFS and use transient domain, TPM states should be kept as it is.
Add per-TPM emulator option `persistent_sate` for keeping TPM state.
This option only works for the emulator type backend and looks as follows:
<tpm model='tpm-tis'>
<backend type='emulator' persistent_state='yes'/>
</tpm>
Signed-off-by: Eiichi Tsukata <eiichi.tsukata@nutanix.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The kernel refuses to set guest TSC frequency less than a minimum
frequency or greater than maximum frequency (both computed based on the
host TSC frequency). When writing the libvirt code with a reversed logic
(return success when the requested frequency falls within the tolerance
interval) I forgot to include the boundaries.
Fixes: d8e5b45600https://bugzilla.redhat.com/show_bug.cgi?id=1839095
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Refactor in 0316c28a45 used incorrect source variable to initialize
the variable which holds the name of the bitmap which needs to be
deleted after the backup job finishes. This resulted into deleting the
source bitmap of the backup rather than the temporary one.
Use 'dd->incrementalBitmap' which holds the temporary bitmap name
instead of 'dd->backupdisk->incremental' which holds the name of the
source bitmap which is used by the backup.
Fixes: 0316c28a45
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1908647
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When starting a VM with an empty cdrom which has <iotune> configured the
startup fails as qemu is not happy about setting tuning for an empty
drive:
error: internal error: unable to execute 'block_set_io_throttle', unexpected error: 'Device has no medium'
Resolve this by skipping the setting of throttling for empty drives and
updating the throttling when new medium is inserted into the drive.
Resolves: https://gitlab.com/libvirt/libvirt/-/issues/111
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Currently, we configure QEMU to prealloc memory almost by
default. Well, by default for NVDIMMs, hugepages and if user
asked us to (via memoryBacking <allocation mode="immediate"/>).
However, when guest's NVDIMM is backed by real life NVDIMM this
approach is not the best. In this case users should put <pmem/>
into the <memory/> device <source/>, like this:
<memory model='nvdimm' access='shared'>
<source>
<path>/dev/pmem0</path>
<pmem/>
</source>
</memory>
Instructing QEMU to do prealloc in this case means that each
page of the NVDIMM is "touched" (the first byte is read and
written back - see QEMU commit v2.9.0-rc1~26^2) which cripples
device wear.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1894053
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
While previously we returned 0 this is not correct. We have to
return a negative value to indicate error.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Even though we are getting driver capabilities with
refresh=false (so that it is not expensive), we still should do
ACL check first because there is no point in bothering with the
capabilities if caller doesn't have permissions to call the API.
Also, this way the comment makes more sense.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The code we have there to copy seclabel model or doi can be
replaced by virStrcpy() calls which do exactly the same checks.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In recent patches new mambers to _qemuAgentDiskAddress struct
were introduced to keep optional CCW address sent by the guest
agent. These two members are a struct to store CCW address into
and a boolean to keep track whether the CCW address is valid.
Well, we can hold the same information with a pointer - instead
of storing the CCW address structure let's keep just a pointer to
it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
On s390x, devices are accessed via the channel subsystem by default,
so we need to look up the devices via their CCW address there instead
of using PCI.
This fixes "virsh domfsinfo" on s390x for virtio-block devices (the first
attempt from commit f8333b3b0a did it in the wrong way, reporting the
device name on the guest side instead of the target name on the host side).
Fixes: f8333b3b0a ("qemu: Fix domfsinfo for non-PCI device information ...")
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1858771
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Newer versions of the QEMU guest agent will provide the CCW address
of devices on s390x. Store this information in the qemuAgentDiskInfo
so that we can use this later.
We also map the CSSID 0 from the guest to the value 0xfe on the host,
see https://www.qemu.org/docs/master/system/s390x/css.html for details.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The lower level function virNetDevGenerateName() now understands that
a blank ifname should be replaced with a generated name based on a
template that it knows about itself - there is no need for the higher
level functions to stuff a template name ("vnet%d") into ifname.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
It must be used when migration URI uses `unix:` transport because otherwise we
cannot just guess where to connect for disk migration.
https://bugzilla.redhat.com/show_bug.cgi?id=1638889
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Simplify ReserveName/GenerateName for macvlan and macvtap by using
common functions.
Signed-off-by: Shi Lei <shi_lei@massclouds.com>
Reviewed-by: Laine Stump <laine@redhat.com>
Simplify GenerateName/ReserveName for netdevtap by using common
functions.
Signed-off-by: Shi Lei <shi_lei@massclouds.com>
Reviewed-by: Laine Stump <laine@redhat.com>
Extract ReserveName/GenerateName from netdevtap and netdevmacvlan as
common helper functions.
Signed-off-by: Shi Lei <shi_lei@massclouds.com>
Reviewed-by: Laine Stump <laine@redhat.com>
In v6.8.0-27-g88957116c9 and friends I've switched the way the
default RAM is specified for QEMU (from plain -m to
memory-backend-*). This means, that even if a guest doesn't have
any NUMA nodes configured we can use memory-backend-* attributes
to translate user config requests. For instance, we can allow
memory to be shared (<access mode='shared'/> under
<memoryBacking/>). But what my original commits are missing is
allowing such configuration in our validator.
Fixes: 88957116c9
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1839034#c12
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The next objective is to move virDomainDeviceDefValidate() to
domain_validate.c. First let's move all the static helpers.
The net device validation functions are used across multiple
drivers, so let's move them separately first.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Move virDomainDeviceDefValidate() and all its helper functions to
domain_validate.c.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
virDomainDefValidateAliases() is one of the static functions that
needs to be handled before moving virDomainDefValidateInternal().
Let's move all related validate functions to domain_validate.c
at the same time.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Now that virPCIDeviceIsPCIExpress() checks the length of the file when
the process lacks sufficient privilege to read the entire PCI config
file in sysfs, we can remove the open-coding for that case from its
consumer.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The one instance of a virPCIDevice in
qemuDomainDeviceCalculatePCIConnectFlags() needs to be converted to
use g_autoptr as a prerequisite for a bugfix. It's in this patch by
itself (rather than in a patch converting all virPCIDevice usages to
g_autoptr) to simplify any backport of said bugfix.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Although the function currently only returns errors for PCI addresses,
check it here too, in case that changes in the future.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We decided to not do metadata-less checkpoints and checking whether the
metadata is consistent is done once the data is actually needed. Remove
the comment.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The alignment step is not really necessary once we've done it already
since we fully populate the definition. In case of checkpoints it was a
relic necessary for populating the 'idx' to match checkpoint disk to
definition disk, but that was already removed.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Commit 926563dc3a which refactored the function call deleting the
snapshot's on disk state introduced a logic bug, which skips over the
deletion of libvirt metadata after the disk state deletion is done.
To fix it we must not return early.
Resolves: https://gitlab.com/libvirt/libvirt/-/issues/109
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
We already calculated the guest area, which is what is subject
to minimum size requirements, a few lines earlier.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The validation callback always fetched a fresh copy of 'qemuCaps' to use
for validation which is wrong in cases when the VM is already running,
such as device hotplug. The newly-fetched qemuCaps may contain flags
which weren't originally in use when starting the VM e.g. on a libvirtd
upgrade.
Since the post-parse/validation machinery has a per-run 'parseOpaque'
field filled with qemuCaps of the actual process we can reuse the caps
in cases when we get them.
The code still fetches a fresh copy if parseOpaque doesn't have a
per-run copy to preserve existing functionality.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The validation callbacks always fetch latest qemuCaps so it won't ever
be NULL. Remove the tautological conditions.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
virDomainDefPostParse infrastructure has apart from the global opaque
data also per-run data, but this was not duplicated into the validation
callbacks.
This is important when drivers want to use correct run-state for the
validation.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Commit f5e8715a8b added logic which adds some fake job info when qemu
didn't return anything but in such case the job type would not be set.
Since we already have the proper job type recorded in qemuBlockJobDataPtr
which the caller fetched, we can use this it and also remove the lookup
from the disk which was necessary prior to the conversion to
qemuBlockJobDataPtr.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Nodename may be asociated to a disk backup job, add support to looking
up in that chain too. This is specifically useful for the
BLOCK_WRITE_THRESHOLD event which can be registered for any nodename.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Nodename may be asociated to a disk backup job, add support to looking
up in that chain too. This is specifically useful for the
BLOCK_WRITE_THRESHOLD event which can be registered for any nodename.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
It's a technical detail in qemu that QCOW2 is needed for a pull-mode
backup.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
'virStorageFileChainLookup' reports an error when the lookup of the
backing chain entry is unsuccessful. Since we possibly use it multiple
times when looking up backing for 'disk->mirror' the function can report
error which won't be actually reported.
Replace the call to virStorageFileChainLookup by lookup in the chain by
index.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use dummy variable to fill 'src' so that access to it doesn't need to be
conditionalized and use temporary variable for 'disk' rather than
dereferencing the array multiple times.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In v6.0.0-rc1~439 (and friends) we tried to cache NUMA
capabilities because we assumed they are immutable. And to some
extent they are (NUMA hotplug is not a thing, is it). However,
our capabilities contain also some runtime info that can change,
e.g. hugepages pool allocation sizes or total amount of memory
per node (host side memory hotplug might change the value).
Because of the caching we might not be reporting the correct
runtime info in 'virsh capabilities'.
The NUMA caps are used in three places:
1) 'virsh capabilities'
2) domain startup, when parsing numad reply
3) parsing domain private data XML
In cases 2) and 3) we need NUMA caps to construct list of
physical CPUs that belong to NUMA nodes from numad reply. And
while this may seem static, it's not really because of possible
CPU hotplug on physical host.
There are two possible approaches:
1) build a validation mechanism that would invalidate the
cached NUMA caps, or
2) drop the caching and construct NUMA caps from scratch on
each use.
In this commit, the latter approach is implemented, because it's
easier.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1819058
Fixes: 1a1d848694
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
If the job has finished, but we didn't yet process the completion fake
that it's still incomplete so that apps which decided to poll
qemuDomainGetBlockJobInfo rather than use events can be sure that the
XML update was completed.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Replace qemuMonitorGetBlockJobInfo by qemuMonitorGetAllBlockJobInfo and
hash table lookup. This basically open-codes qemuMonitorGetBlockJobInfo,
but it will be removed in next patch.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
In recent commit of bf8bd93df0 (and friends) we switched the way
we process queried command line arguments: from string lists to
virJSONValue stored in a hash table. To achieve this
qemuMonitorJSONGetCommandLineOptions() helper was introduced
which executes the "query-command-line-options" monitor command
and then calls virJSONValueArrayForeachSteal() to process the
output. The array process function is also given
qemuMonitorJSONGetCommandLineOptionsWorker() as the callback
which is called over each item of the returned array. This
callback then steals "parameters" attribute of each array iteam
storing it in the hash table, but it leaves behind "option"
attribute (because it's g_strdup()-ed). After all of this, the
callback returns 0 which is a signal to the array processing
function that the callback took ownership of the array item. But
this is not true. While it removed "parameters" it did not take
the rest ("option" for instance). And therefore, it leads to a
memory leak:
5,347 (1,656 direct, 3,691 indirect) bytes in 69 blocks are definitely lost in loss record 2,752 of 2,794
at 0x483BEC5: calloc (vg_replace_malloc.c:760)
by 0x4E25A10: g_malloc0 (in /usr/lib64/libglib-2.0.so.0.6400.5)
by 0x4943317: virJSONValueNewObject (virjson.c:569)
by 0x4945692: virJSONParserHandleStartMap (virjson.c:1768)
by 0x5825A86: yajl_do_parse (in /usr/lib64/libyajl.so.2.1.0)
by 0x4945BFA: virJSONValueFromString (virjson.c:1896)
by 0xAF5C115: qemuMonitorJSONIOProcessLine (qemu_monitor_json.c:224)
by 0xAF5C45E: qemuMonitorJSONIOProcess (qemu_monitor_json.c:279)
by 0xAF4BB6C: qemuMonitorIOProcess (qemu_monitor.c:342)
by 0xAF4C444: qemuMonitorIO (qemu_monitor.c:574)
by 0x4FEF846: socket_source_dispatch (in /usr/lib64/libgio-2.0.so.0.6400.5)
by 0x4E1F727: g_main_context_dispatch (in /usr/lib64/libglib-2.0.so.0.6400.5)
The callback must return 1 so that the array item is properly
freed.
Fixes: ebeff6cd57
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Since the function is now only used in qemu_domain.c, move it from
domain_conf.c and rename it.
This reverts the work done in commit ace5931553
(conf, qemu: move qemuDomainNVDimmAlignSizePseries to domain_conf.c).
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
qemuDomainAlignMemorySizes() has an operation order problem. We are
calculating 'initialmem' without aligning the memory modules first.
Since we're aligning the dimms afterwards this can create inconsistencies
in the end result. x86 has alignment of 1-2MiB and it's not severely
impacted by it, but pSeries works with 256MiB alignment and the difference
is noticeable.
This is the case of the existing 'memory-hotplug-ppc64-nonuma' test.
The test consists of a 2GiB (aligned value) guest with 2 ~520MiB dimms,
both unaligned. 'initialmem' is calculated by taking total_mem and
subtracting the dimms size (via virDomainDefGetMemoryInitial()), which
wil give us 2GiB - 520MiB - 520MiB, ending up with a little more than
an 1GiB of 'initialmem'. Note that this value is now unaligned, and
will be aligned up via VIR_ROUND_UP(), and we'll end up with 'initialmem'
of 1GiB + 256MiB. Given that the dimms are aligned later on, the end
result for QEMU is that the guest will have a 'mem' size of 1310720k,
plus the two 512 MiB dimms, exceeding in 256MiB the desired 2GiB
memory and currentMemory specified in the XML.
Existing guests can't be fixed without breaking ABI, but we have
code already in place to align pSeries NVDIMM modules for new guests.
Let's extend it to align all pSeries mem modules.
A new test, 'memory-hotplug-ppc64-nonuma-abi-update', a copy of the
existing 'memory-hotplug-ppc64-nonuma', was added to demonstrate the
result for new pSeries guests. For the same unaligned XML mentioned
above, after applying this patch:
- starting QEMU mem size without PARSE_ABI_UPDATE:
-m size=1310720k,slots=16,maxmem=4194304k \ (no changes)
- starting QEMU mem size with PARSE_ABI_UPDATE:
-m size=1048576k,slots=16,maxmem=4194304k \ (size fixed)
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
A previous patch removed the pSeries NVDIMM align that wasn't
being done properly. This patch reintroduces it in the right
fashion, making it reliant on VIR_DOMAIN_DEF_PARSE_ABI_UPDATE.
This makes it complying with the intended design defined by
commit c7d7ba85a6.
Since the PARSE_ABI_UPDATE is more restrictive than checking for
!migrate && !snapshot, like is being currently done with
qemuDomainAlignMemorySizes(), this means that we'll align the
pSeries NVDIMMs in two places - in post parse time for new
guests, and in qemuDomainAlignMemorySizes() for all guests
that aren't migrating or in a snapshot.
Another difference is that the logic is now in the QEMU driver
instead of domain_conf.c. This was necessary because all
considerations made about the PARSE_ABI_UPDATE flag were done
under QEMU. Given that no other driver supports ppc64 there is no
impact in this change.
A new test was added to exercise what we're doing. It consists
of a a copy of the existing 'memory-hotplug-nvdimm-ppc64' xml2xml
test, called with the PARSE_ABI_UPDATE flag. As intended, we're
not changing QEMU command line or any XML without the flag,
while the pseries NVDIMM memory is being aligned when the
flag is used.
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
After previous cleanup the @qemuCaps argument in
qemuDomainDefValidateMemoryHotplug() is unused and thus doesn't
need to be passed.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
So far our memory modules could go only into DIMM slots. But with
virtio model this assumption is no longer true - virtio-pmem goes
onto PCI bus. But for formatting PCI address onto command line we
already have a function - qemuBuildDeviceAddressStr(). Therefore,
mode DIMM address generation into it so that we don't have to
special case address building later on.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Tested-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Tested-by: Han Han <hhan@redhat.com>
There is this function qemuDomainDefValidateMemoryHotplug() which
is called explicitly from hotplug path and the qemu's domain def
validator. This is not really necessary because we can move the
part that validates feature against qemuCaps into device
validator which is called implicitly (from qemu driver's POV).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Tested-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Tested-by: Han Han <hhan@redhat.com>
The virDomainMemoryModel structure has a @type member which is
really type of virDomainMemoryModel but we store it as int
because the virDomainMemoryModelTypeFromString() call stores its
retval right into it. Then, to have compiler do compile time
check for us, every switch() typecasts the @type. This is
needlessly verbose because the parses already has @val - a
variable to store temporary values. Switch @type in the struct to
virDomainMemoryModel and drop all typecasts.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Tested-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Tested-by: Han Han <hhan@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Tested-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Tested-by: Han Han <hhan@redhat.com>
This macro checks whether given number is an integer power of
two. At the same time, I've identified two places where we check
for pow2 and I'm replacing them with the macro.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Tested-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Tested-by: Han Han <hhan@redhat.com>
Checking the definition ABI when redefining checkpoints doesn't make
much sense for the following reasons:
* the domain definition in the checkpoint is mostly unused (a relic
adopted from the snapshot code)
* can be very easily overridden by deleting the checkpoint metadata
before redefinition
Rather than complicating the logic when we'll be taking into account
that the domain definition may be missing, let's just remove the check.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
qemuBuildCommandLine() is calling qemuDomainAlignMemorySizes(),
which is an operation that changes live XML and domain and has
little to do with the command line build process.
Move it to qemuProcessPrepareDomain() where we're supposed to
make live XML and domain changes before launch. qemuProcessStart()
is setting VIR_QEMU_PROCESS_START_NEW if !migrate && !snapshot,
same conditions used in qemuBuildCommandLine() to call
qemuDomainAlignMemorySizes(), making this change seamless.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
qemuProcessCreatePretendCmdPrepare() is setting the
VIR_QEMU_PROCESS_START_NEW regardless of whether this is
a migration case or not. This behavior differs from what we're
doing in qemuProcessStart(), where the flag is set only
if !migrate && !snapshot.
Fix it by making the flag setting consistent with what we're
doing in qemuProcessStart().
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Let's pass along / fill @niothreads rather than trying to make dual
use as a return value and thread count.
This resolves a Coverity issue detected in qemuDomainGetIOThreadsMon
where if qemuDomainObjExitMonitor failed, then a -1 was returned and
overwrite @niothreads causing a memory leak.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Existing practice with the filesystem fields reported for the
virDomainGetGuestInfo API is to use the singular form for
field names. Ensure the disk info follows this practice.
Fixes
commit 05a75ca2ce
Author: Marc-André Lureau <marcandre.lureau@redhat.com>
Date: Fri Nov 20 22:09:46 2020 +0400
domain: add disk informations to virDomainGetGuestInfo
commit 0cb2d9f05d
Author: Marc-André Lureau <marcandre.lureau@redhat.com>
Date: Fri Nov 20 22:09:47 2020 +0400
qemu_driver: report guest disk informations
commit 172b830435
Author: Marc-André Lureau <marcandre.lureau@redhat.com>
Date: Fri Nov 20 22:09:48 2020 +0400
virsh: add --disk informations to guestinfo command
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Currently it is simply ignored.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Currently it is simply ignored.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Commit c4f4e195 fixed a double free, but if the code returns before
we realloc the list and virFirmwareFreeList was called with cfg->nfirmwares
> 0 (e.g. during virQEMUDriverConfigDispose), then it would be rather
disastrous. So let's reinitialize that too to indicate the list is empty.
Coverity pointed out that using nvram[0] as a guard to reallocating the
list could lead to a possible NULL deref. While nvram[0] may always be
true in this case, if it wasn't then the subsequent for loop would fail.
Just reallocate always regardless - even if nfirmwares == 0 as
virFirmwareFreeList will free it for us anyway.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Glib provides g_auto(GStrv) which is in-place replacement of our
VIR_AUTOSTRINGLIST.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
If there is an error getting info from guest agent, then the
control on qemuDomainGetGuestInfo() jumps onto 'exitagent' label
and subsequently continues on 'endagentjob'. Both labels are hit
also in success case too. The control then continues by
attempting to match fetched info (e.g. disk addresses) with
domain def. But this is needless - the API will return error
regardless.
To return early from the function move both 'exitagent' and
'endagentjob' labels at the end of the function and jump straight
onto 'cleanup' afterwards. This allows us to set 'ret = 0' later
- only when we know we succeeded.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Remove the function along with helpers for caching the reply and tests.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use the new handler to fetch the required data and do the extraction
locally without conversion to string list.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Add a new set hander for getting the data for
'query-command-line-options' which returns everything at once and lets
the caller extract the data. This way we don't need to cache the output
of the monitor command for repeated calls.
Note that we will have enough testing of this code path via
qemucapabilitiestest.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Do not look up the index of the passed FD in places where
we already have it.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
An alternative to qemuVirCommandGetFDSet that takes the index
into the passed FD set as an argument and does not try to look it up.
Use it as well ass virCommandPassFDIndex in qemuBuildChrChardevFileStr
and qemuBuildInterfaceCommandLine.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
In a few commit back (v6.10.0-5-gb3dad96972) a new helper for
obtaining string arrays from a virJSONObject was introduced:
virJSONValueObjectGetStringArray(). I've identified three places
where it can be used instead of open coding it:
qemuAgentSSHGetAuthorizedKeys(),
qemuMonitorJSONGetStringListProperty() and
qemuMonitorJSONGetCPUDefinitions().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
cfg->firmwares still points to the original memory address after being
freed by virFirmwareFreeList(). As cfg get freed, it will be freed again
even if cfg->nfirmwares=0 which eventually lead to crash.
The patch fix it by setting cfg->firmwares to NULL explicitly after
virFirmwareFreeList() returns
Signed-off-by: Guoyi Tu<tu.guoyi@h3c.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Tested-by: Han Han <hhan@redhat.com>
guest-get-disks is available since QEMU 5.2:
https://wiki.qemu.org/ChangeLog/5.2#Guest_agent
Note that the test response was manually edited based on a reply on my
bare-metal computer. It shows partial results due to pcieport driver not
being currently supported by QGA.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Tested-by: Han Han <hhan@redhat.com>
There might be more potential users around, I haven't looked thoroughly.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Tested-by: Han Han <hhan@redhat.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Tested-by: Han Han <hhan@redhat.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Tested-by: Han Han <hhan@redhat.com>
To match the QGA schema name (we are introducing a qemuAgentDiskInfo
struct again for different purpose).
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Tested-by: Han Han <hhan@redhat.com>
Even though it is technically possible, when running the migrations QEMU's
nbd-server-start errors out with:
"TLS is only supported with IPv4/IPv6"
We can always enable it when QEMU adds this feature, but for now it is safer to
show our error message rather than rely on QEMU to error out properly.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
When executing the hypervisor-cpu-baseline command and if there is
only a single CPU definition present in the XML file, then the
baseline handler will exit early and libvirt will print an unhelpful
message:
"error: An error occurred, but the cause is unknown"
This is due to no CPU definition ever being "baselined", since the
handler expects at least two CPU models.
Let's fix this by performing a CPU model expansion on the single CPU
definition and returning the result to the caller. This will also
ensure the CPU model's feature set is sane if any were provided in
the file.
Signed-off-by: Collin Walling <walling@linux.ibm.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Check the provided CPU models against the CPU models
known by the hypervisor before baselining and print
an error if an unrecognized model is found.
Signed-off-by: Collin Walling <walling@linux.ibm.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
When executing the hypervisor-cpu-baseline command and the
XML file contains a CPU definition without a model name, or
an invalid CPU definition, then the commands will fail and
return an error message from the QMP response.
Let's clean this up by checking for a valid definition and
presence of a model name.
This code is copied from virCPUBaseline.
Signed-off-by: Collin Walling <walling@linux.ibm.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Hypervisor-cpu-baseline requires the cpu-model-expansion
capability when expanding CPU model features if the
--features flag is provided.
Signed-off-by: Collin Walling <walling@linux.ibm.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Forgetting to use the VIR_MIGRATE_TLS flag with migration can lead to
leak of sensitive information. Add an administrative knob to force use
of the flag.
Note that without VIR_MIGRATE_PEER2PEER, the migration is driven by an
instance of the client library which doesn't necessarily run on either
of the hosts so the flag can't be used to assume VIR_MIGRATE_TLS even
if it wasn't provided by the user instead of rejecting if it's not.
Resolves: https://gitlab.com/libvirt/libvirt/-/issues/67
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
qemu's internals were not prepared for switching to -blockdev for the
legacy storage migration. Add a proper error message since qemu is
unlikely to attempt fixing the old protocol.
Resolves: https://gitlab.com/libvirt/libvirt/-/issues/65
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Move and aggregate all the logic which is switched based on whether the
migration is tunnelled or not before other checks. Further checks will
be added later.
While the code is being moved the error message is put on a single line
per new coding style.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Our streams are not the best transport for migration data and we support
TLS for security now. It's unlikely that there will be enough motivation
to add a new migration protocol to tunnel NBD too.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Similarly to previous commit dealing with snapshots we must rewrite the
metadata of the previously-'current' checkpoint when changing which
checkpoint is considered 'current'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Whether a snapshot definition is considered 'current' or active is
stored in the metadata XML libvirt writes when we create metadata.
This means that if we are changing the 'current' snapshot we must
re-write the metadata of the previously 'current' snapshot to update the
field to prevent having multiple active snapshots.
Unfortunately the snapshot creation code didn't do this properly, which
resulted in the following error:
error : qemuDomainSnapshotLoad:430 : internal error: Too many snapshots claiming to be current for domain snapshot-test
being printed if libvirtd was terminated and restarted.
Introduce qemuSnapshotSetCurrent which writes out the old snapshot's
metadata when updating the current snapshot.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In some cases such as when creating an internal inactive snapshot we
know that the domain definition in the snapshot is equivalent to the
current definition. Additionally we set up the current definition for
the snapshotting but not the one contained in the snapshot. Thus in some
cases the caller knows better which def to use.
Make qemuDomainSnapshotForEachQcow2 take the definition by the caller
and copy the logic for selecting the definition to callers where we
don't know for sure that the above claim applies.
This fixes internal inactive snapshots when <disk type='volume'> is used
as we translate the pool/vol combo only in the current def.
Resolves: https://gitlab.com/libvirt/libvirt/-/issues/97
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Don't try to manipulate snapshots on network or unresolved volume backed
storage.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
'continue' the loop if the device is not a disk. Saving the level makes
one of the error messages fit on a single line.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The ESP SCSI controllers (NCR53C90, DC390, AM53C974) have the same
requirement as the LSI Logic controller for each disk to be set via
the scsi-id=NNN property, not the lun=NNN property.
Switching the code to use an enum will force authors to pay attention
to this difference when adding future SCSI controllers.
Reviewed-by: Laine Stump <laine@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
When introducing the API I've mistakenly used 'int' type for
@nkeys argument which does nothing more than tells the API how
many items there are in @keys array. Obviously, negative values
are not expected and therefore 'unsigned int' should have been
used.
Reported-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The NCR53C90 is the built-in SCSI controller on all sparc machine types,
but not sparc64. Note that it has the fixed alias "scsi", which differs
from our normal naming convention of "scsi0".
The DC390 and AM53C974 are PCI SCSI controllers that can be added to any
PCI machine.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Probing for the NCR53C90 controller is a little unusual. The
qom-list-types QMP command returns a list of all types known to
the QEMU binary. It does not distinguish devices which are user
creatable from those which are built-in.
Any QEMU target that supports PCI will have the DC390 / AM53C974
devices because they are PCI based. Due to code dependencies
in QEMU though, existence of these two devices will also pull in
the NCR53C90 device (called just 'esp' in QEMU). The NCR53C90 is
not user-creatable and can only be used when built-in to the
machine type.
This is only the case on sparc machines, and certain mips64 and
m68k machines. IOW, we don't rely on qom-list-types as a guide
for existence of NCR53C90, as it shouldn't really exist in most
QEMU binaries.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The NCR53C90 is the built-in SCSI controller on all sparc machine types,
and some mips and m68k machine types.
The DC390 and AM53C974 are PCI SCSI controllers that can be added to any
PCI machine.
These are only interesting for emulating obsolete hardware platforms.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The NCR53C90 ESP SCSI controller is only usable when built-in to the
machine type. This method will facilitate checking that restriction
across many places.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The sparc machines have little in common with sparc64 machines.
No sparc machine type includes a PCI bus, so we should not be adding one
to the XML. This further means that we should not be adding a memory
balloon device, nor USB controller as these are both PCI based.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
In QEMU 5.2, the guest agent learned to manipulate a user
~/.ssh/authorized_keys. Bind the JSON API to libvirt.
https://wiki.qemu.org/ChangeLog/5.2#Guest_agent
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Similarly to previous commits, we can utilize domCaps to check if
graphics type is supported.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
QEMU supports egl-headless if QEMU_CAPS_EGL_HEADLESS capability
is present. There are some additional requirements but those are
checked for in qemuValidateDomainDeviceDefGraphics() and depend
on domain configuration and thus are not representable in domain
capabilities. Let's stick with plain qemuCaps check then.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
In my recent commit of 5216304bfe I've moved RNG model check
from domain capabilities validator into qemu validator. During
that I had to basically duplicate RNG model to qemuCaps checks.
Problem with this approach is that after my commit qemu validator
and domCaps are disconnected and thus domCaps might report (in
general) different set of supported RNG models.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
In my recent commit of a33279daa8 I've moved video model check
from domain capabilities validator into qemu validator. During
that I had to basically duplicate video model to qemuCaps checks.
Problem with this approach is that after my commit qemu validator
and domCaps are disconnected and thus domCaps might report (in
general) different set of supported video models.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
QEMU version 4.2 introduced a performance feature under commit
d645e13287 ("kvm: i386: halt poll control MSR support").
This patch adds a new KVM feature 'poll-control' to set this performance
hint for KVM guests. The feature is off by default.
To enable this hint and have libvirt add "-cpu host,kvm-poll-control=on"
to the QEMU command line, the following XML code needs to be added to the
guest's domain description:
<features>
<kvm>
<poll-control state='on'/>
</kvm>
</features>
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Now that the domCaps cache is history, this code is no longer
used and thus can be removed.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Currently, whenever a domain capabilities is needed (fortunately,
after cleanup done by previous commits it is now only in
virConnectGetDomainCapabilities()), the object is stored in a
cache. But there is no invalidation mechanism for the cache
(except the implicit one - the cache is part of qemuCaps and thus
share its lifetime, but that is not enough). Therefore, if
something changes - for instance new firmware files are
installed, or old are removed these changes are not reflected in
the virConnectGetDomainCapabilities() output.
Originally, the caching was there because domCaps were used
during device XML validation and they were used a lot from our
test suite. But this is no longer the case. And therefore, we
don't need the cache and can construct fresh domCaps on each
virConnectGetDomainCapabilities() call.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1807198
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Now that nothing uses virDomainCapsDeviceDefValidate() it can be
removed.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The aim is to eliminate virDomainCapsDeviceDefValidate(). And in
order to do so, the domain video model has to be validated in
qemuValidateDomainDeviceDefVideo().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The aim is to eliminate virDomainCapsDeviceDefValidate(). And in
order to do so, the domain RNG model has to be validated in
qemuValidateDomainRNGDef().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
This is a Coverity fix pointed out by John in IRC. This code
was introduced in 19d74fdf0e, when the TPM Proxy device for
for ppc64 was introduced.
This will leak in case we have 2 TPMs in the same domain, a
possible scenario with the protected Ultravisor execution in
PowerPC guests.
Fixes: 19d74fdf0e
Reported-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Libvirt's backup code has two modes:
1) push - where qemu actively writes the difference since the checkpoint
into the output file
2) pull - where we instruct qemu to expose a frozen disk state along
with a bitmap of blocks which changed since the checkpoint
For push mode qemu needs the temporary bitmap we use where we calculate
the actual changes to be present on the block node backing the disk.
For pull mode where we expose the bitmap via NBD qemu actually wants the
bitmap to be present for the exported block node which is the scratch
file.
Until now we've calculated the bitmap twice and installed it both to the
scratch file and to the disk node, but we don't need to since we know
when it's needed.
Pass in the 'pull' flag and decide where to install the bitmap according
to it and also when to register the bitmap name with the blockjob.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
The NBD server used to export pull-mode backups doesn't have any other
form of client authentication on top of the TLS transport, so the only
way to authenticate clients is to verify their certificate.
Enable this option by defauilt when both 'backup_tls_x509_verify' and
'default_tls_x509_verify' were not configured.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1879477
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
The migration stream connection and also the NBD server for non-shared
storage migration don't have any other form of client authentication on
top of the TLS transport, so the only way to authenticate clients is to
verify their certificate.
Enable this option by defauilt when both 'migrate_tls_x509_verify' and
'default_tls_x509_verify' were not configured.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1879477
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Chardevs don't have any other form of client authentication on top of
the TLS transport, so the only way to authenticate clients is to verify
their certificate.
Enable this option by defauilt when both 'chardev_tls_x509_verify' and
'default_tls_x509_verify' were not configured.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1879477
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
If both "vnc_tls_x509_verify" and "default_tls_x509_verify" are missing
from the config file the client certificate validation is disabled. VNC
provides a layer of authentication so client certificate validation is
not strictly required.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Store whether "default_tls_x509_verify" was provided and enhance the
SET_TLS_VERIFY_DEFAULT macro so that indiviual users can provide their
own default if "default_tls_x509_verify" config option was not provided.
For now we keep setting it to 'false'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Typecast the controller type variable to the appropriate type and add
the missing controller types for future extension.
Note that we currently allow only unplug of
VIR_DOMAIN_CONTROLLER_TYPE_SCSI thus the other controller types which
are not implemented return false now.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Iterate through hostdevs only when the controller type is
VIR_DOMAIN_CONTROLLER_TYPE_SCSI.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The tests which match the disk bus to the controller type were backwards
in this function. This meant that any disk bus type (such as
VIR_DOMAIN_DISK_BUS_SATA) would not skip the controller index comparison
even if the removed controller was of a different type.
Switch the internals to a switch statement with selects the controller
type in the first place and a proper type so that new controller types
are added in the future.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1870072
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
A bad merge while rebasing 74b2834333 caused the @event variable
to be defined twice, inside the 'cleanup' label, causing coverity
errors.
This code was originally moved outside of the label by commit
773c7c4361. Delete the unintended code in the 'cleanup'
label.
Fixes: 74b2834333
Reported-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Use g_autoptr() and remove the 'cleanup' label.
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Use VIR_AUTOCLOSE with 'fd' and delete the 'cleanup' label.
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Use g_autoptr() to deprecate the 'cleanup' label.
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Remove obsolete 'cleanup' labels after the changes from the
previous patch.
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Some labels became deprecated after the previous patches.
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Due to failures to unlink on previous rename/undefine we can already have
autolink etc files for the domain to be defined. Remove them.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Let's move objlist restoring to cleanup section so that we can handle failure
of actions between virDomainObjListAdd and virDomainDefSave. We are going
to add such actions in next patch.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
If domain name is changed since snapshot we need to update it to current in
config taken from snapshot.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
This is basically just saves checkpoints metadata on disk after name is changed
in memory as path to domain checkpoints directory depends on name. After that
old checkpoint directory is deleted with checkpoint metadata files.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
This is basically just saves snapshots metadata on disk after name is changed
in memory as path to domain snapshot directory depends on name. After that
old snapshot directory is deleted with snapshot metadata files.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
This patch also changes functionality a bit.
First if unlinking of old config file is failed we rollback and return error
previously and now we return success. I don't think this makes much difference.
I guess in both cases on libvirtd restart we have to deal with both new and old
config existing on disk with different names but same uuid.
Second if unlinking of old autolink is failed we rollback previously which
was not right as at this point we already unlink old config file. So this
is fixed now.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Going to cleanup label is mere return -1 thus let's just return
instead of goto to this label.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
We can simplify cleanup section by moving sending events to success path only
because only on sucess path events are not NULL.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
For example if saving config file with new name fails we send false undefine
event currently.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Some CPUs provide a way to read exact TSC frequency, while measuring it
is required on other CPUs. However, measuring is never exact and the
result may slightly differ across reboots. For this reason both Linux
kernel and QEMU recently started allowing for guests TSC frequency to
fall into +/- 250 ppm tolerance interval around the host TSC frequency.
Let's do the same to avoid unnecessary failures (esp. during migration)
in case the host frequency does not exactly match the frequency
configured in a domain XML.
https://bugzilla.redhat.com/show_bug.cgi?id=1839095
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
There are two types of vhostuser ports:
dpdkvhostuser - OVS creates the socket and QEMU connects to it
dpdkvhostuserclient - QEMU creates the socket and OVS connects to it
But of course ovs-vsctl syntax for fetching ifname is different.
So far, we've implemented the former. The lack of implementation
for the latter means that we are not detecting the interface name
and thus not reporting it in domain XML, or failing to get
interface statistics.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1767013
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Although the code in qemuProcessStartValidateTSC works as if the
timer frequency was already unsigned long long (by using an appropriate
temporary variable), the virDomainTimerDef structure actually defines
frequency as unsigned long, which is not guaranteed to be 64b.
Fixes support for frequencies higher than 2^32 - 1 on 32b systems.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
A qemu guest which has virtiofs config fails to start if the previous
starting failed because of invalid option or something.
That's because the virtiofsd isn't killed by virPidFileForceCleanupPath()
on the former failure because the pidfile was already removed by
virFileDeleteTree(priv->libDir) in qemuProcessStop(), so
virPidFileForceCleanupPath() just returned.
Move qemuExtDevicesStop() before virFileDeleteTree(priv->libDir) so that
virPidFileForceCleanupPath() can kill virtiofsd correctly.
For example of the reproduction:
# virsh start guest
error: Failed to start domain guest
error: internal error: process exited while connecting to monitor: qemu-system-x86_64: -foo: invalid option
... fix the option ...
# virsh start guest
error: Failed to start domain guest
error: Cannot open log file: '/var/log/libvirt/qemu/guest-fs0-virtiofsd.log': Device or resource busy
#
Signed-off-by: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This function always returns zero, so it might as well be void.
Signed-off-by: Matt Coleman <matt@datto.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This function always returns zero, so it might as well be void.
Signed-off-by: Matt Coleman <matt@datto.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This function always returns zero, so it might as well be void.
Signed-off-by: Matt Coleman <matt@datto.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This function always returns zero, so it might as well be void.
Signed-off-by: Matt Coleman <matt@datto.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This function always returns zero, so it might as well be void.
Signed-off-by: Matt Coleman <matt@datto.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The function only returns zero or aborts, so it might as well be void.
This has the added benefit of simplifying the code that calls it.
Signed-off-by: Matt Coleman <matt@datto.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
When using .path() for an argument to a python script meson will not
setup dependancies on the file. This means that changes to the generator
script will not trigger a rebiuld
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The enum constant names should all have a prefix that matches the enum
name. VIR_DOMAIN_CHECKPOINT_REDEFINE_VALIDATE was missing the "CREATE_"
part of the name prefix.
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Verify that the checkpoint requested by an incremental backup exists.
Unfortunately validating whether the checkpoint configuration actually
matches the disk may not be reasonably feasible as the disk may have
been renamed/snapshotted/etc. We still rely on bitmap presence.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Validate that the bitmaps are present when redefining a checkpoint.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
First one prepares and validates the definition, the second one actually
either updates an existing checkpoint or assigns definition for the new
one.
This will allow driver code to add extra validation between those
steps.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
If we don't have a consistent chain of bitmaps for the backup to proceed
we'd report VIR_ERR_INVALID_ARG error code, which makes it hard to
decide whether an incremental backup makes even sense.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In testing code we don't properly populate the job sometimes. If it
isn't populated we should not touch it though in the migration cookie
code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Include qemu_domain.h and qemu_domainjob.h as the types from those
headers are used by this header.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
qemuMigrationSrcCleanup uses qemuDomainObjDiscardAsyncJob currently. But
discard does not reduce jobs_queued counter so it leaks. Also discard does not
notify other threads that job condition is available. Discard does reset nested
job but nested job is not possible in this conditions.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Don't hide our use of GHashTable behind our typedef. This will also
promote the use of glibs hash function directly.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Matt Coleman <matt@datto.com>
The simplest way to write tests is to check the output against expected
output, but we must ensure that the output is stable. We can use
virHashForEachSorted as a hash iterator to ensure stable ordering.
This patch fixes 3 instances of hash iteration which is tested in
various parts, including test output changes in appropriate places.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Matt Coleman <matt@datto.com>
All but one of the callers either use the list in arbitrary order or
sorted by key. Rewrite the function so that it supports sorting by key
natively and make it return the element count. This in turn allows to
rewrite the only caller to sort by value internally.
This allows to remove multiple sorting functions which were sorting by
key and the function will be also later reused for some hash operations
internally.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Matt Coleman <matt@datto.com>
The remember owner feature uses XATTRs to store original
seclabels. But that means we don't want a regular user to be able
to change what we stored and thus trick us into setting different
seclabel. Therefore, we use namespaces that are reserved to
CAP_SYS_ADMIN only. Such namespaces exist on Linux and FreeBSD.
That also means, that the whole feature is enabled only for
qemu:///system. Now, while the secdriver code is capable of
dealing with XATTRs being unsupported (it has to, not all
filesystems support them) if the feature is enabled users will
get an harmless error message in the logs and the feature
disables itself.
Since we have virSecurityXATTRNamespaceDefined() we can use it to
make a wiser decision on the default state of the feature.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Add logic to validate and then pass through 'fmode' and 'dmode' to the
QEMU call.
Signed-off-by: Brian Turek <brian.turek@gmail.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
The QEMU 9pfs 'fmode' and 'dmode' options have existed since QEMU 2.10.
Probe QEMU's command line set to check whether these options are
available, and if yes, enable this new QEMU_CAPS_FSDEV_CREATEMODE
capability on libvirt side.
Signed-off-by: Brian Turek <brian.turek@gmail.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
All other helper processes are moved to cgroup with QEMU emulator
thread as we keep the root VM cgroup without any processes. This
assumption is validated in qemuRestoreCgroupState() which is called
when libvirtd is restarted and reconnected to all running VMs.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
In both cases priv->cgroup will always be NULL because it is called
before the QEMU process is started and cgroups are configured.
In qemuProcessLaunch() the call order is following:
qemuExtDevicesStart()
...
virCommandRun()
...
qemuSetupCgroup()
where qemuDBusStart() is called from qemuExtDevicesStart() but we
cgroups are created in qemuSetupCgroup().
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
After converting all DIR* to g_autoptr(DIR), many cleanup: labels
ended up just having "return ret", and every place that set ret would
just immediately goto cleanup. Remove the cleanup label and its
return, and just return the set value immediately, thus eliminating
the need for the return variable itself.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
All of these conversions are trivial - VIR_DIR_CLOSE() (aka
virDirClose()) is called only once on the DIR*, and it happens just
before going out of scope.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
This will make it easier to review upcoming patches that use g_autoptr
to auto-close all DIRs.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Now that qemu stabilized it's interface and we've switched to the new
design we can re-enable use of 'block-export-add'
This reverts commit b87cfc957f
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
qemu decided to modify the arguments of 'block-export-add' to include an
array of bitmaps rather than a single bitmap.
Since we've added the code prior to qemu setting the interface in stone
and thus it will be changed incompatibly and we already have tests for
the new interface we need to update the code and qemu capabilities data
at the same time.
Use a array of bitmaps as the 'bitmaps' argument instead of 'bitmap' and
bump qemu capabilities for the upcoming 5.2.0 release to
v5.1.0-2827-g2c6605389c
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
We use the capability to switch to using 'block-export-add' in the
upcoming qemu release instead of the at the same time deprecated
'nbd-server-add'.
Unfortunately qemu wants to change the interface of 'block-export-add'
before the release. Since we've tried to stay up to date and added the
code before it was written in stone, we need to disable the use of the
new interface for the upcoming libvirt release so that we don't have a
version of libvirt which would not work with the upcoming qemu version.
Remove the detection of 'block-export-add' until we are more sure how
the qemu interface will look.
This patch partially reverts commit adb9f7123a
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Currently all errors from qemuInterfacePrepareSlirp() are completely
ignored by the callers. The intention is that missing qemu-slirp binary
should cause the caller to fallback to the built-in slirp impl.
Many of the possible errors though should indeed be considered fatal.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Eliminate cleanup code by using g_autofree.
Signed-off-by: Yi Li <yili@winhong.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
In recent commit v6.8.0-135-g518be41aaa the formatting of NBD
into migration cookie was moved into a separate function and with
it it was switched from direct printing into the output buffer to
virXMLFormatElement(). But there was a typo. The
virXMLFormatElement() accepts two buffers on input, one for
element attributes and another for child elements. Well, the line
that was supposed to add NBD port into the attributes buffer
printed the attribute directly into the output buffer which
produced this mangled XML:
<qemu-migration>
port='49153'<nbd>
<disk target='vda' capacity='8589934592'/>
<disk target='vdb' capacity='12746752000'/>
</nbd>
</qemu-migration>
Changing the incriminated line to print into the attributes
buffer fixes the problem.
Fixes: 518be41aaa
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
In one of recent patches the way that we start NBD server for
incoming migration was reworked (v6.8.0-rc1~298). A new boolean
was introduced that tracks whether the NBD server was started so
that we don't start it twice nor record in the port in the port
allocator twice. Well, this idea is good, but in the
implementation the boolean is never set, so we are reserving the
port twice and would be starting the NBD server twice too if it
wasn't for port reservation fail.
Fixes: e74d627bb3
Reported-by: Vjaceslavs Klimovs <vklimovs@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
In qemuDomainLogContextNew() the domain log file is opened.
Twice, the first time for writing, and the second time for
reading (if required by caller). When opening the log file for
reading a mode is provided. This doesn't do much harm, but is
unnecessary. Drop the mode.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Trivial fix to improve readability by combining these into a compound
conditional.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
Coverity reported a potential resource leak. While it's probably not
a real-world scenario, the code could technically jump to cleanup
between the time that vdpafd is opened and when it is used. Ensure that
it gets cleaned up in that case.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
Since QEMU 5.2 (commit-77b285f7f6), QEMU supports 'memory failure'
event, posts event to monitor if hitting a hardware memory error.
Fully support this feature for QEMU.
Test with commit 'libvirt: support memory failure event', build a
little complex environment(nested KVM):
1, install newly built libvirt in L1, and start a L2 vm. run command
in L1:
~# virsh event l2 --event memory-failure
2, run command in L0 to inject MCE to L1:
~# virsh qemu-monitor-command l1 --hmp mce 0 9 0xbd000000000000c0 0xd 0x62000000 0x8c
Test result in l1(recipient hypervisor case):
event 'memory-failure' for domain l2:
recipient: hypervisor
action: ignore
flags:
action required: 0
recursive: 0
Test result in l1(recipient guest case):
event 'memory-failure' for domain l2:
recipient: guest
action: inject
flags:
action required: 0
recursive: 0
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
All users of virHashTable pass strings as the name/key of the entry.
Make this an official requirement by turning the variables to 'const
char *'.
For any other case it's better to use glib's GHashTable.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
It doesn't make much sense to configure the bucket count in the hash
table for each case specifically. Replace all calls of virHashCreate
with virHashNew which has a pre-set size and remove virHashCreate
completely.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
virHashCreate will be removed in upcoming patches. This change has an
impact on ordering of the blockjob entries in one of the status XML->XML
tests.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Use of the -enable-fips option is being deprecated in QEMU >= 5.2.0. If
FIPS compliance is required, QEMU must be built with libcrypt which will
unconditionally enforce it.
Thus there is no need for libvirt to pass -enable-fips to modern QEMU.
Unfortunately there was never any way to probe for -enable-fips in the
first instance, it was enabled by libvirt based on version number
originally, and then later unconditionally enabled when libvirt dropped
support for older QEMU. Similarly we now use a version number check to
decide when to stop passing -enable-fips.
Note that the qemu-5.2 capabilities are currently from the pre-release
version and will be updated once qemu-5.2 is released.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
libvirt can retrieve traffic stats for emulated interfaces that are
backed by tap or macvtap devices, but this information wasn't
available for hostdev interfaces (those that are implemented by
assigning an SR-IOV VF device to a guest using vfio):
#virsh domifstat instance --interface=52:54:00:2d:b2:35
error: Failed to get interface stats instance 52:54:00:2d:b2:35
error: internal error: Interface name not provided
For some SR-IOV VF devices this information is available via the
netlink VFINFO_LIST request/response, and that is what this patch uses
to implement stats retrieval for VF. Not that this is dependent on
support in the PF driver - for example, the Mellanox ConnectX-4 Lx
(mlx5) driver reports usable stats, while Intel 82599 (ixgbe) and
82576 (igb) just report all stats as 0. (this is the same result as
"ip -s link show").
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Reviewed-by: Laine Stump <laine@redhat.com>
By using the new qemu monitor functions to handle passing and removing
file descriptors, we can support hotplug of vdpa devices.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
add-fd, remove-fd, and query-fdsets provide functionality that can be
used for passing fds to qemu and closing fdsets that are no longer
necessary.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
Enable <interface type='vdpa'> for qemu domains. This provides basic
support and does not support hotplug or migration.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
Recent versions of qemu added the -netdev vhost-vdpa device. This
capability allows libvirt to know whether this is supported.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
This patch adds new schema and adds support for parsing and formatting
domain configurations that include vdpa devices.
vDPA network devices allow high-performance networking in a virtual
machine by providing a wire-speed data path. These devices require a
vendor-specific host driver but the data path follows the virtio
specification.
When a device on the host is bound to an appropriate vendor-specific
driver, it will create a chardev on the host at e.g. /dev/vhost-vdpa-0.
That chardev path can then be used to define a new interface with
type='vdpa'.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
My code movement changed the type of ifaces_ret from
virDomainInterfacePtr * to virDomainInterfacePtr **,
but failed to adjust the condition or dereference the
array correctly.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Fixes: 6ddb1f803e
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
SCSI hostdev setup requires querying the host os for the actual path of
the configured hostdev. This was historically done in the command line
formatter. Our new approach is to split out this part into
'qemuProcessPrepareHost' which is designed to be skipped in tests.
Refactor the hostdev code to use this new semantics, and add appropriate
handlers filling in the data for tests and the qemuConnectDomainXMLToNative
users.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
qemuBuildHostdevSCSIAttachPrepare is supposed to prepare the data
structure used for attaching the hostdev not preparing the hostdev
definition itself. Move the corresponding bits to qemuDomainPrepareHostdev
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Host preparation steps which are deliberately skipped when
pretend-creating a commandline are normally executed after VM object
preparation. In the test code we are faking some of the host
preparation steps, but we were doing that prior to the call to
qemuProcessPrepareDomain embedded in qemuProcessCreatePretendCmd.
By splitting up qemuProcessCreatePretendCmd into two functions we can
ensure that the ordering of the prepare steps stays consistent.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Switch to the new QMP command once it becomes available. Since the code
was refactored to have just one central location to do this we can
contain the ugly bits to just this one function.
Since we now use the replacement for 'nbd-server-add' mark the test case
as being OK with removal of the command.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Add the monitor code, corresponding generator of properties for NBD and
tests validating it against the schema.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The 'block-export-add' QMP command is a replacement for 'nbd-server-add'
and will allow greater flexibility. Add a capability so that we can
switch to it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Centralize the logic deciding which arguments to use when exporting a
block backend via NBD to a single place so that it can be centrally
fixed in upcoming commits to support the new export method via
'block-export-add'.
Additionally this allows simplification of the caller from migration as
the logic deciding which arguments to use is extracted too.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
These XML attributes have been mandatory since the introduction of SEV
support to libvirt. This design decision was based on QEMU's
requirement for these to be mandatory for migration purposes, as
differences in these values across platforms must result in the
pre-migration checks failing (not that migration with SEV works at the
time of this patch).
This patch enables autofill of these attributes right before launching
QEMU and thus updating the live XML.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Checks such as this one should be done at domain def validation time,
not before starting the QEMU process.
As for this change, existing domains will see some QEMU error when
starting as opposed to a libvirt error that this QEMU binary doesn't
support SEV, but that's okay, we never guaranteed error messages to
remain the same.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
