This is available in QEMU with "ide-hd" and "scsi-hd" device
types. It was originally mistakenly added to the "scsi-block"
device type too, but later removed. This doesn't affect libvirt
since we restrict usage to device=disk.
When this property is not set then QEMU's default behaviour
is to not report any rotation rate information, which
causes most guest OS to assume rotational storage.
https://bugzilla.redhat.com/show_bug.cgi?id=1498955
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This lets the app expose the virtual SCSI or IDE disks as solid state
devices by setting a rate of '1', or rotational media by setting a
rate between 1025 and 65534.
https://bugzilla.redhat.com/show_bug.cgi?id=1498955
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Two blank lines are needed either side of functions.
Comments must have a single space character immediately after
the "#".
The unused exception variable can be removed.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Since /usr/local is where ports live, it's reasonable to assume
that a grep binary found in there will have been installed via
ports and will thus be GNU grep.
Suggested-by: Erik Skultety <eskultet@redhat.com>
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
macOS is similar to FreeBSD in that it ships non-GNU versions
of several utilities that we need in the base system.
macOS actually includes GNU make already, but unfortunately due
to licensing reasons the tool is permanently stuck in 2006, so
even in that case users are better off installing a recent
version from Homebrew along with the dozens of other libvirt
dependencies that already need to be obtained that way.
Note that, unlike FreeBSD ports, Homebrew is fully consistent
in adding the 'g' prefix to the name of the GNU tools, so we
can detect GNU grep without additional hacks.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
As explained in the comment in build-aux/Makefile.in, the
version of sed included in the FreeBSD base system is not GNU
sed, which our syntax-check rules expect; as a result, many
checks will fail with
gmake: gsed: No such file or directory
/bin/sh: gsed: not found
Similarly to what we're already doing with GNU make and GNU
grep, look for GNU sed during the configuration step and fail
early if it's not available.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
While this change doesn't look like it would improve things and
actually introduces a tiny bit of duplication, it's necessary in
order to prepares the stage for further changes.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Currently, if GNU grep is not installed on a FreeBSD system the
configuration step will fail with
Program grep found: YES (/usr/bin/grep)
Program /usr/local/bin/grep found: NO
ERROR: Program '/usr/local/bin/grep' not found
which is confusing and not very useful; after this change, the
message will be
Program grep found: YES (/usr/bin/grep)
Program /usr/local/bin/grep found: NO
ERROR: Problem encountered: GNU grep not found
instead, which should do a better job helping the user figure
out that they need to install GNU grep from ports to proceed.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
We should always pass --werror and display the contents of the
log file in case of failure.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Previously, we accepted empty bridge name, because some old versions of
VMWare Workstation did not put it into the config. But this doesn't make
much sense - to have an interface type bridge with no name. We
circumvented this problem by generating an empty name but that is
equally wrong.
Therefore, fill in missing bridge names (according to the documentation
[1] the default bridge name is VMnet0) and error out if bridge name is
missing.
This partially reverts f246cdb5ac
1: https://docs.vmware.com/en/VMware-Workstation-Player-for-Linux/16.0/com.vmware.player.linux.using.doc/GUID-BAFA66C3-81F0-4FCA-84C4-D9F7D258A60A.html
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
When testing locally built daemons on a systemd host there can be quite
a few systemd units that need temporarily stopping, and ideally
restarting after the test is complete. This becomes a massive burden
when modular daemons are running and you want to test libvirtd, as a
huge number of units need stopping.
The run script can facilitate this usage by looking at what units are
running and automatically stopping any that are known to conflict with
the daemon that is about to be run. This is only done when running as
root, since non-root libvirtd does not (currently) use systemd.
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This fits with the goal of eliminating non-Python scripting languages,
and makes forthcoming changes far easier.
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Mention some of the stuff we dealt with in this release.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Mention that libvirt-7.2 will be needed to do stuff that executes
'object-add'/'object-del' QMP commands with the upcoming qemu-6.0 and
that exec-restart of virtlockd and virtlogd was fixed.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
The
<os firmware='efi'>
<firmware type='efi'>
<feature enabled='no' name='enrolled-keys'/>
</firmware>
</os>
repeats the firmware attribute twice. This has no functional benefit, as
evidenced by fact that we use a single struct field to store both
attributes, while needlessly introducing an error scenario. The XML can
just be simplified to:
<os firmware='efi'>
<firmware>
<feature enabled='no' name='enrolled-keys'/>
</firmware>
</os>
which also means that we don't need to emit the empty element
<firmware type='efi'/> for all existing configs too.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This API talks to QEMU and changes its internal state. Therefore,
it should acquire QEMU_JOB_MODIFY instead of QEMU_JOB_QUERY.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
This API interacts with the hypervisor and makes changes to its
behaviour, so must be protected by the write permission.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Updated by "Update PO files to match POT (msgmerge)" hook in Weblate.
Translation: libvirt/libvirt
Translate-URL: https://translate.fedoraproject.org/projects/libvirt/libvirt/
Co-authored-by: Weblate <noreply@weblate.org>
Signed-off-by: Fedora Weblate Translation <i18n@lists.fedoraproject.org>
Since the functions provided by libpciaccess are not thread-safe,
when the udev-event and nodedev-init threads of libvirt call the
pci_get_strings function provided by libpaciaccess at the same
time the following can happen:
nodedev-init thread:
nodeStateInitializeEnumerate ->
udevEnumerateDevices->
udevProcessDeviceListEntry ->
udevAddOneDevice ->
udevGetDeviceDetails->
udevProcessPCI ->
udevTranslatePCIIds ->
pci_get_strings -> (libpciaccess)
find_device_name ->
populate_vendor ->
d = realloc( vend->devices, (vend->num_devices + 1), * sizeof( struct pci_device_leaf ) );
vend->num_devices++;
udev-event thread:
udevEventHandleThread ->
udevHandleOneDevice ->
udevAddOneDevice->
udevGetDeviceDetails->
udevProcessPCI ->
udevTranslatePCIIds ->
pci_get_strings -> (libpciaccess)
find_device_name ->
populate_vendor ->
d = realloc( vend->devices, (vend->num_devices + 1), * sizeof( struct pci_device_leaf ) );
vend->num_devices++;
Signed-off-by: WangJian <wangjian161@huawei.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Recently, a few commits back I've switched bunch of code to
g_steal_pointer() using coccinelle. Problem was that the semantic
patch used was slightly off:
@@
expression a, b;
@@
+ b = g_steal_pointer(&a);
- b = a;
... when != a
- a = NULL;
Problem is that, "... when != a" is supposed to jump over those
lines, which don't contain expression a. My idea was to replace
the following pattern too:
ptrX = ptrY;
if (something(ptrZ) < 0) goto error;
ptrY = NULL;
But what I missed is that the following pattern is also matched
and replaced:
ptrX = ptrY;
if (something(ptrX) < 0) goto error;
ptrY = NULL;
This is not necessarily correct - as demonstrated by our hotplug
code. The real problem is ambiguous memory ownership transfer
(functions which add device to domain def take ownership only on
success), but to not tackle the real issue let's revert those
parts.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Turns out, the way that glib implements g_steal_pointer() is not
compatible with function callbacks. And that's what my recent
patch did in virNetSocketEventFree(). Revert that part.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Notable changes:
* HAL is no longer installed on FreeBSD;
* the native version of libwsman is no longer installed in
containers intended for cross-compilation;
* Meson 0.55 rather than 0.54 is requested when installing
it from PyPI;
* GNU sed and GNU grep are installed explicitly everywhere.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
In one of my recent patches I've introduced new connection
feature VIR_DRV_FEATURE_NETWORK_UPDATE_HAS_CORRECT_ORDER.
However, I forgot to add corresponding case into a switch in
vzConnectSupportsFeature().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The order in which virNetworkUpdate() accepts @section and
@command arguments is not the same as in which it passes them
onto networkUpdate() callback. Until recently, it did not really
matter, because calling the API on client side meant arguments
were encoded in reversed order (compared to the public API), but
then on the server it was fixed again - because the server
decoded RPC (still swapped), called public API (still swapped)
and in turn called the network driver callback (with reversing
the order - so magically fixing the order).
Long story short, if the public API is called even number of
times those swaps cancel each other out. The problem is when the
API is called an odd numbed of times - which happens with split
daemons and the right URI. There's one call in the client (e.g.
virsh net-update), the other in a hypervisor daemon (say
virtqemud) which ends up calling the API in the virnetworkd.
The fix is obvious - fix the order in which arguments are passed
to the callback.
But, to maintain compatibility with older, yet unfixed, daemons
new connection feature is introduced. The feature is detected
just before calling the callback and allows client to pass
arguments in correct order (talking to fixed daemon) or in
reversed order (talking to older daemon).
Unfortunately, older client talking to newer daemon can't be
fixed. Let's hope that it's less frequent scenario.
Fixes: 574b9bc66b
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1870552
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
So far, it was not needed, but shortly a client will want to know
whether virNetworkUpdate() API is fixed or not. See next commits
for more info.
Side note, this driver's implementation is called only when using
sub-driver's connection, i.e. "network:///system". For any other
URI the corresponding hypervisor's driver callback is called.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Just like VFIO devices, vDPA devices may need to have all guest memory
pages locked/pinned in order to operate properly. In the case of VFIO
devices (including mdev and NVME, which also use VFIO) libvirt
automatically increases the locked memory limit when one of those
devices is present. This patch modifies that code to also increase the
limit if there are any vDPA devices present.
Resolves: https://bugzilla.redhat.com/1939776
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
This function is a specialized version of
qemuDomainGetMemLockLimitBytes() for PPC64. Simplifying it in the same
manner as the previous patch has the nice side effect of accounting
for the possibility of an mdev device
(I don't know if mdev devices are supported on PPC, but even if not
then a) the additional check for mdev devices gained by using
qemuDomainNeedsVFIO() in place of open coding will be an effective
NOP, and b) if mdev devices are supported on PPC64 in the future, this
function will be prepared for it).
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
This function goes through a loop checking if each hostdev is a VFIO
or mdev device, and then later it calls virDomainDefHasNVMEDisk(). The
function qemuDomainNeedsVFIO() does exactly the same thing, so let's
just call that instead.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
This function returns true if the domain has any interfaces that are
type='vdpa'.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Generated by the following spatch:
@@
expression a, b;
@@
+ b = g_steal_pointer(&a);
- b = a;
... when != a
- a = NULL;
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
The ESX implementation of virConnectListAllDomains() follows
pretty much implementations in other drivers: it has local array
of virDomainPtr-s which (if requested by caller) is filled by
actual domains or not (if the caller is interested only in the
count of domains).
Anyway, in case of the former, the passed @domains argument is
set to the local array, which is then set to NULL to prevent it
from freeing under cleanup label. Pretty standard pattern.
Except, the local array is set to NULL always. Even if the local
array is not stolen. Fortunately, this doesn't lead to a memory
leak, because if caller is not interested in the array, none is
allocated. But it doesn't set good example and also breaks my
spatch rules.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Some SRIOV PFs don't have a netdev associated with them (the spec
apparently doesn't require it). In most cases when libvirt is dealing
with an SRIOV VF, that VF must have a PF, and the PF *must* have an
associated netdev (the only way to set the MAC address of a VF is by
sending a netlink message to the netdev of that VF's PF). But there
are times when we don't need for the PF to have a netdev; in
particular, when we're just getting the Switchdev Features for a VF,
we don't need the PF netdev - the netdev of the VF (apparently) works
just as well.
Commit 6452e2f5 (libvirt 5.1.0) *kind of* made libvirt work around PFs
with no netdevs in this case - if virNetDevGetPhysicalFunction
returned an error when setting up to retrieve Switchdev feature info,
it would ignore the error, and then check if the PF netdev name was
NULL and, if so it would reset the error object and continue on rather
than returning early with a failure. The problem is that by the time
this special handling occured, the error message about missing netdev
had already been logged, which was harmless to proper operation, but
confused the user.
Fortunately there are only 2 users of virNetDevGetPhysicalFunction, so
it is easy to redefine it's API to state that a missing netdev name is
*not* an error - in that case it will still return success, but the
caller must be prepared for the PF netdev name to be NULL. After
making this change, we can modify the two callers to behave properly
with the new semantics (for one of the callers it *is* still an error,
so the error message is moved there, but for the other it is okay to
continue), and our spurious error messages are a thing of the past.
Resolves: https://bugzilla.redhat.com/1924616
Fixes: 6452e2f5e1
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
These were the result of the conversion to RST by commit
97f21a82b2.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The page isn't linked from anywhere and the contents is dated.
Images related to the page are also dropped.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
