Move libxlFreeMem from libxl_driver to libxl_domain for
use by other libxl modules. For consistency, rename to
libxlDomainFreeMem.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Move libxlDoNodeGetInfo from libxl_driver to libxl_conf
for use by other libxl modules. For consistency, rename to
libxlDriverNodeGetInfo.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Move libxlDomEventsRegister from libxl_driver to libxl_domain for
use by other libxl modules. For consistency, rename to
libxlDomainEventsRegister.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Move libxlVmCleanup and libxlVmCleanupJob from libxl_driver to
libxl_domain for use by other libxl modules. For consistency,
rename to libxlDomainCleanup and libxlDomainCleanupJob.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Move libxlSaveImageOpen from libxl_driver to libxl_domain for
use by other libxl modules. For consistency, rename to
libxlDomainSaveImageOpen.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Currently, we use pthread_sigmask(SIG_BLOCK, ...) prior to calling
poll(). This is okay, as we don't want poll() to be interrupted.
However, then - immediately as we fall out from the poll() - we try to
restore the original sigmask - again using SIG_BLOCK. But as the man
page says, SIG_BLOCK adds signals to the signal mask:
SIG_BLOCK
The set of blocked signals is the union of the current set and the set argument.
Therefore, when restoring the original mask, we need to completely
overwrite the one we set earlier and hence we should be using:
SIG_SETMASK
The set of blocked signals is set to the argument set.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1071181
Commit 49b59a15 fixed one problem but masks another one related to pointer
freeing.
Avoid putting of the virNWFilterSnoopReq once the thread has been started.
It belongs to the thread and the thread will call virNWFilterSnoopReqPut() on it.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Before refactoring this struct, I found it helpful to track which
'int' fields really contain an enum value.
* src/conf/domain_conf.h (_virDomainDiskDef): Add comments.
Signed-off-by: Eric Blake <eblake@redhat.com>
While running qemuhotplugtest, it was found that valgrind pointed out
the following memory leak:
==7906== 5 bytes in 1 blocks are definitely lost in loss record 7 of 121
==7906== at 0x4A069EE: malloc (vg_replace_malloc.c:270)
==7906== by 0x3E782A754D: xmlStrndup (in /usr/lib64/libxml2.so.2.7.6)
==7906== by 0x4CDAE03: virDomainDeviceInfoParseXML.isra.32 (domain_conf.c:3685)
==7906== by 0x4CE3BB9: virDomainNetDefParseXML (domain_conf.c:6707)
==7906== by 0x4CFBA08: virDomainDefParseXML (domain_conf.c:12235)
==7906== by 0x4CFBC1E: virDomainDefParseNode (domain_conf.c:13039)
==7906== by 0x4CFBD95: virDomainDefParse (domain_conf.c:12981)
==7906== by 0x41FEB4: testQemuHotplug (qemuhotplugtest.c:66)
==7906== by 0x420F41: virtTestRun (testutils.c:201)
==7906== by 0x41F287: mymain (qemuhotplugtest.c:422)
==7906== by 0x4216BD: virtTestMain (testutils.c:784)
==7906== by 0x3E6CE1ED1C: (below main) (libc-start.c:226)
...and 10 more.
Problem is, since 20745748 we do both, parse <alias/> elements from
XML files and call qemuAssignDeviceAliases(). While generating runtime
info for domain at runtime is just fine in the test, we can parse just
inactive XML and remove all <alias/>-es from the XML files.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
I forgot to delete the underscore in object_locking_SOURCES when
changing the name in one of previous cleanups.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Ancient automake (such as from RHEL5) does not provide abs_srcdir and
abs_builddir variables which are used by a recent commit of mine
(e562e82).
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
To allow for fault injection of the virCommand dry run,
add the ability to register a callback. The callback will
be passed the argv, env and stdin buffer and is expected
to return the exit status and optionally fill stdout and
stderr buffers.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The CMD_STOPONERR macro uses its parameter as a boolean, so should
be passed true rather than 1.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The 'int isTempChain' parameter to various nwfilter methods
only takes two values so should be a bool type.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Many nwfilter methods have an int return value but only ever
return 0 and their callers never check the return value either.
These methods can all be void.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Many nwfilter methods have an 'int stopOnError' parameter but
with 1 exception, the callers always pass '1'. The parameter
can therefore be removed from all except one method. That method
will be changed to 'bool stopOnError'
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
A lot of methods have a 'bool incoming' parameter but then
do (incoming) ? ... : .... The round brackets here add nothing
to the code so can be removed.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Many methods in the nwfilter code have an 'int incoming' parameter
that only takes 0 or 1, so should use a bool instead.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
In libxl driver oldStateDir is NULL when calling
virHostdevReAttachDomainHostdevs. This is allowed.
Remove ATTRIBUTE_NONNULL setting from oldStateDir.
Introduced by commit 6225cb3.
Signed-off-by: Chunyan Liu <cyliu@suse.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
libxl uses the libxl_vnc_info and libxl_sdl_info fields from the
hvm union in libxl_domain_build_info struct when generating QEMU
args for VNC or SDL. These fields were left unset by the libxl
driver, causing libxl to ignore any user settings. E.g. with
<graphics type='vnc' port='5950'/>
port would be ignored and QEMU would instead be invoked with
-vnc 127.0.0.1:0,to=99
Unlike the libxl_domain_config struct, the libxl_domain_build_info
contains only a single libxl_vnc_info and libxl_sdl_info, so
populate these fields from the first vfb in
libxl_domain_config->vfbs.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Signed-off-by: David Kiarie <davidkiarie4@gmail.com>
Emacs is fairly good about navigating across function and scope
boundaries, provided that the code has balanced {}. The vbox
code, however, violated that premise, by splitting 'if () {'
across several #ifdef branches, but sharing the '} else {...}'
outside of the branches. The extra lines of code is worth my
sanity, in a function that is already a horrendous 1100+ lines
long.
* src/vbox/vbox_tmpl.c (vboxDomainGetXMLDesc) Duplicate code
rather than trying to share else branch across #ifdef.
Signed-off-by: Eric Blake <eblake@redhat.com>
A earlier commit changed the global log buffer so that it only
records messages that are explicitly requested via the log
filters setting. This removes the performance burden, and
improves the signal/noise ratio for messages in the global
buffer. At the same time though, it is somewhat pointless, since
all the recorded log messages are already going to be sent to an
explicit log output like syslog, stderr or the journal. The
global log buffer is thus just duplicating this data on stderr
upon crash.
The log_buffer_size config parameter is left in the augeas
lens to prevent breakage for users on upgrade. It is however
completely ignored hereafter.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Currently the log filter strings are used in a string comparison
against the source filename each time log message is emitted.
If no log filters at all are set, there's obviously no string
comparison to be done. If any single log filter is set though,
this imposes a compute burden on every logging call even if logs
from the file in question are disabled. This string comparison
must also be done while the logging mutex is held, which has
implications for concurrency when multiple threads are emitting
log messages.
This changes the log filtering to be done based on the virLogSource
object name. The virLogSource struct is extended to contain
'serial' and 'priority' fields. Any time the global log filter
rules are changed a global serial number is incremented. When a
log message is emitted, the serial in the virLogSource instance
is compared with the global serial number. If out of date, then
the 'priority' field in the virLogSource instance is updated based
on the new filter rules. The 'priority' field is checked to see
whether the log message should be sent to the log outputs.
The comparisons of the 'serial' and 'priority' fields are done
with no locks held. So in the common case each logging call has
an overhead of 2 integer comparisons, with no locks held. Only
if the decision is made to forward the message to the log output,
or if the 'serial' value is out of date do locks need to be
acquired.
Technically the comparisons of the 'serial' and 'priority' fields
should be done with locks held, or using atomic operations. Both
of these options have a notable performance impact, however, and
since all writes a protected by a global mutex, it is believed
that worst case behaviour where the fields are read concurrently
with being written would merely result in an mistaken emission
or dropping of the log message in question. This is an acceptable
tradeoff for the performance benefit of avoiding locking.
As a quick benchmark, a demo program that registers 500 file
descriptors with the event loop (eg equiv of 500 QEMU monitor
commands), creates pending read I/O on every FD, and then runs
virEventRunDefaultImpl() took 4.6 seconds to do 51200 iterations.
After this optimization it only takes 3.3 seconds, with the log
APIs no longer being a relevant factor in the running time.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Any source file which calls the logging APIs now needs
to have a VIR_LOG_INIT("source.name") declaration at
the start of the file. This provides a static variable
of the virLogSource type.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
As part of the goal to get away from doing string matching on
filenames when deciding whether to emit a log message, turn
the virLogSource enum into a struct which contains a log
"name". There will eventually be one virLogSource instance
statically declared per source file. To minimise churn in this
commit though, a single global instance is used.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The dtrace probe macros rely on the logging API. We can't make
the internal.h header include the virlog.h header though since
that'd be a circular include. Instead simply split the dtrace
probes into their own header file, since there's no compelling
reason for them to be in the main internal.h header.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The error reporting code will invoke a callback when any error
is raised and the default callback will print to stderr. The
virRaiseErrorFull method also sends all error messages on to the
logging code, which also prints to stderr by default. To avoid
duplicated data on stderr, the logging code has some logic to
skip emission when no log outputs are configured, which checks
whether the virLogSource == VIR_LOG_FROM_ERROR.
Meanwhile the libvirtd daemon can register another callback which
is used to reduce log message priority from error to a lower level.
When this is used we do want messages to end up on stderr, so the
error code will conditionally use either VIR_LOG_FROM_FILE or
VIR_LOG_FROM_ERROR depending on whether such a callback is provided.
This will all complicate later refactoring. By pushing the checks
for whether a log output is present up a level into the error code,
the special cases can be isolated in one place.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
With the vast number of log debug statements in the code, the
logging framework has a measurable performance impact on libvirt
code, particularly in the daemon event loop.
The global log buffer records every single log message triggered
whether anyone cares to see them or not. This makes it impossible
to eliminate the overhead of printf format expansions in any of
the logging code. It is possible to disable the global log buffer
in libvirtd itself, but this doesn't help client side library
code. Also even if disabled by the config file, the existence of
the feature makes other performance improvements in the logging
layer impossible.
Instead of logging every single message to the global buffer, only
log messages that pass the log filters. This if libvirtd is set
to have log_filters="1:libvirt 1:qemu" the global log buffer will
only get filled with those messages instead of everything. This
reduces the performance burden, as well as improving the signal
to noise ratio of the log buffer.
As a quick benchmark, a demo program that registers 500 file
descriptors with the event loop (eg equiv of 500 QEMU monitor
commands), creates pending read I/O on every FD, and then runs
virEventRunDefaultImpl() took 1 minute 40 seconds to do 51200
iterations with nearly all the time shown against the logging
code. After this optimization it only takes 4.6 seconds.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Coverity spotted a use of possibly undefined variable. If a server is
restarting as an result of update, the JSON file that keeps current
value of some variables will not contain the new variables. This is
the case of @max_anonymous_clients too. We are correctly querying if
there's "max_anonymous_clients" in the JSON, however, we are not
setting a sane default if there's none.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
We allow translation from no_bandwidth to has_bandwidth for a vnic.
However, going in the opposite direction is not implemented. It's not
limitation of the API rather than internal implementation. The problem
is, we correctly detect that user hasn't specified any outbound (say
he wants to clear out outbound). However, this gets overwritten by
current vnic outbound settings. Then, virNetDevBandwidthSet doesn't
change anything. We need to stop overwriting the outbound if users
don't want us to. Same applies for inbound.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
If there should be some sort of separator it is better to use comment
with the filename, copyright, description, license information and
authors.
Found by:
git grep -nH '^$' | grep '\.[ch]:1:'
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
This patch is not trying to fix every switch, just the ones I worked
with last time, because some of these were especially unreadable.
Covers enums virDomainGraphicsType and virDomainChrType (where
applicable).
Also sort its cases by their value.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Commit a1cbe4b5 added a check for spaces around assignments and this
patch extends it to checks for spaces around '=='. One exception is
virAssertCmpInt where comma after '==' is acceptable (since it is a
macro and '==' is its argument).
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
When ran, cil is throwing out some errors and warnings for obsolete
'or' unused variables and wrong module name (it should not contain a
hyphen; hence the rename).
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
While running qemuxml2xmltest, it was found that valgrind pointed out
the following memory leak:
==21905== 26 bytes in 1 blocks are definitely lost in loss record 23 of 69
==21905== at 0x4A069EE: malloc (vg_replace_malloc.c:270)
==21905== by 0x3E782A754D: xmlStrndup (in /usr/lib64/libxml2.so.2.7.6)
==21905== by 0x4CD986D: virDomainChrSourceDefParseXML (domain_conf.c:7233)
==21905== by 0x4CE4199: virDomainChrDefParseXML (domain_conf.c:7512)
==21905== by 0x4CFAF3F: virDomainDefParseXML (domain_conf.c:12303)
==21905== by 0x4CFB46E: virDomainDefParseNode (domain_conf.c:13031)
==21905== by 0x4CFB5E9: virDomainDefParse (domain_conf.c:12973)
==21905== by 0x41E9D8: testCompareXMLToXMLFiles (qemuxml2xmltest.c:40)
==21905== by 0x41EBAA: testCompareXMLToXMLHelper (qemuxml2xmltest.c:93)
==21905== by 0x421D21: virtTestRun (testutils.c:199)
==21905== by 0x41FCE9: mymain.part.0 (qemuxml2xmltest.c:244)
==21905== by 0x42249D: virtTestMain (testutils.c:782)
==21905==
... and 7 more
Addition of vshConnect() makes virConnectOpen() functions obsolete in
virsh. Thus all virsh-*.[ch] files should be left only with
vshConnect() in the case of need.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Introducing keepalive similarly to Guannan around 2 years ago. Since
we want to introduce keepalive for every connection, it makes sense to
wrap the connecting function into new virsh one that can deal
keepalive as well.
Function vshConnect() is now used for connecting and keepalive added
in that function (if possible) helps preventing long waits e.g. while
nework goes down during migration.
This patch also adds the options for keepalive tuning into virsh and
fails connecting only when keepalives are explicitly requested and
cannot be set (whether it is due to missing support in connected
driver or remote server). If not explicitely requested, a debug
message is printed (hence the addition to virsh-optparse test).
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1073506
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=822839
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Make virt-aa-helper create rules to allow VMs access to filesystem
mounts from the host.
Signed-off-by: Felix Geyer <debfx@fobos.de>
Signed-off-by: Hiroshi Miura <miurahr@linux.com>
Signed-off-by: Serge Hallyn <serge.hallyn@ubuntu.com>
Signed-off-by: Guido Günther <agx@sigxcpu.org>
While running domainsnapshotxml2xmltest, it was found that valgrind pointed out
the following memory leak:
==32176== 42 (32 direct, 10 indirect) bytes in 1 blocks are definitely lost in loss record 42 of 66
==32176== at 0x4A069EE: malloc (vg_replace_malloc.c:270)
==32176== by 0x4A06B62: realloc (vg_replace_malloc.c:662)
==32176== by 0x4C65A07: virReallocN (viralloc.c:243)
==32176== by 0x4C65B2E: virExpandN (viralloc.c:292)
==32176== by 0x4C65E30: virInsertElementsN (viralloc.c:434)
==32176== by 0x4CD71F3: virDomainDiskSourceDefParse (domain_conf.c:5078)
==32176== by 0x4CF6EF4: virDomainSnapshotDefParseNode (snapshot_conf.c:151)
==32176== by 0x4CF7314: virDomainSnapshotDefParseString (snapshot_conf.c:410)
==32176== by 0x41FB8D: testCompareXMLToXMLHelper (domainsnapshotxml2xmltest.c:100)
==32176== by 0x420FD1: virtTestRun (testutils.c:199)
==32176== by 0x41F859: mymain (domainsnapshotxml2xmltest.c:222)
==32176== by 0x42174D: virtTestMain (testutils.c:782)
==32176==
... and one more.